تخطي إلى المحتوى الرئيسي
البريد الالكتروني

[email protected]

رقم الهاتف

6163

العودة إلى الملف الشخصي
ازهر محسن عبد

بحوث سكوبس — ازهر محسن عبد

ميكانيك عام - قدره • ميكانيك عام - طاقة متجددة

389 إجمالي البحوث
6678 إجمالي الاستشهادات
2026 أحدث نشر
6 أنواع المنشورات
عرض 389 بحث
2026
9 بحث
Li D.; Bai Z.; Samad S.; Abed A.M.; Li Y.; Alhumaid S.; Dutta A.K.; Alkhalaf S.; Khan M.N.; Ali H.E.
Renewable Energy , Vol. 256
1 استشهاد Article English ISSN: 09601481
Shandong Peninsula Engineering Research Center of Comprehensive Brine Utilization, Weifang University of Science and Technology, Weifang, China; Anhui Xinhua University, Hefei, 230088, China; Department of Management, College of Business Administration, Princess Nourah bint Abdulrahman University, Riyadh, 11671, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; School of Computer Engineering, Weifang University, Weifang, China; Department of Mechanical Engineering, University of Hail, Hail, 81481, Saudi Arabia; Department of Computer Science and Information Systems, College of Applied Sciences, AlMaarefa University, Ad Diriyah, Riyadh, 13713, Saudi Arabia; Department of Computer Engineering, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Mechanical and Industrial Engineering, College of Engineering, Majmaah University, Al-Majmaah, 11952, Saudi Arabia; Physics Department, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia; Research Center, Deanship of Scientific Research and Post-Graduate Studies, AlMaarefa University, Dariyah, 13713, Saudi Arabia
The present work investigates the thermal and exergy performance of a novel bidirectional wavy absorber solar air heater (BWA-SAH) with sinusoidal corrugations in both the transverse and longitudinal directions to enhance heat transfer through increased surface area and turbulence. As compared to conventional studies on unidirectional wavy geometries, the present study extensively examines the impact of significant geometric parameters longitudinal and transversal wavelengths ((Wll/dh), (Wlt/dh), wave amplitudes (Awl/dh), (Awt/dh), and Reynolds number on performance parameters such as Nu number, friction factor, thermohydraulic performance parameter (THPP), and exergy efficiency. A complete numerical investigation is conducted with the assistance of CFD simulations confirmed and accelerated by a trained deep neural network (DNN) model of 243 simulations. The DNN delivers R2 > 0.98 for all performance measures and enables fast prediction with notable speedup compared to CFD simulations. Key findings reveal that smaller longitudinal wavelengths (Wll/dh = 1.35) enhance heat transfer (Nu increases by ∼35 %) but significantly enhance pressure drop (f increases by ∼84 %). Similarly, higher longitudinal amplitudes (Awl/dh = 0.270) raise Nu by ∼20 % but (f by ∼100 %, highlighting a significant trade-off. A higher Reynolds number enhances heat transfer (Nu increases by 108 % as Re rises from 5000 to 15,000), but it reduces the THPP by approximately 11 % and exergy efficiency by about 53 % due to increased irreversibilities. The study confirms that intermediate longitudinal wavelengths (Wll/dh = 2.25) and amplitudes (Awl/dh = 0.16) optimize THPP and exergy efficiency, and low Re (<10,000) minimizes pressure drop penalties. Coupling CFD simulations and DNN modeling provides a robust platform for rapid design optimization, significantly advancing the design of energy-efficient and sustainable solar air heaters. This research paves the way for more affordable and eco-friendly solar thermal systems, further driving global efforts in renewable energy deployment. © 2025 Elsevier Ltd
الكلمات المفتاحية: Bidirectional wavy absorber Deep neural network Exergy efficiency Solar air heater Thermal performance
Ibrahim A.O.; Abed A.M.; Abduvokhidov A.; Madaminov B.; Madaminov S.; Yadav B.K.; Khedher N.B.
Scientific Reports , Vol. 16 (1)
1 استشهاد Article Open Access English ISSN: 20452322
Department of Architectural Engineering, Faculty of Engineering, University of Hail, Hail, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; New Uzbekistan University, Movarounnahr street 1, Tashkent, 100000, Uzbekistan; Andijan State University, Universitet Str. 129, Andijan, 170100, Uzbekistan; Mamun University, Bolkhovuz Street 2, Khiva, 220900, Uzbekistan; Urgench State University, Urgench, 220100, Uzbekistan; Department of Mechanical Engineering, Institute of Engineering (IOE), Tribhuvan University (TU), Purwanchal Campus, Dharan-08, Nepal; Department of Mechanical Engineering, College of Engineering, University of Ha’il, Ha’il City, 81451, Saudi Arabia
The integration of electric vehicles (EVs) with building energy systems presents substantial opportunities for carbon emission reduction and energy optimization through bidirectional energy flows. This study develops and validates a comprehensive scenario-based analytical framework for vehicle-to-building (V2B) and building-to-vehicle (B2V) integration, evaluating performance across diverse operational conditions and geographic regions. Five operational scenarios were analyzed using DesignBuilder simulation software and mixed-integer linear programming optimization for a commercial office building with 15 EVs in Riyadh, Saudi Arabia and Tashkent, Uzbekistan. The methodology incorporated comprehensive energy modeling, stochastic EV availability patterns, grid-responsive control strategies, and photovoltaic (PV) system integration. Results demonstrated substantial multi-faceted benefits from bidirectional EV integration. Optimal V2B operations achieved energy consumption reductions of 10.9% in Riyadh and comparable improvements in Tashkent, while V2B combined with PV systems delivered 22.8% and 18.2% reductions respectively. Carbon emission reductions paralleled energy savings, with optimal V2B achieving 10.9% reduction in Riyadh and V2B + PV scenarios reaching 22.8% and 18.1% reductions. Peak demand management showed substantial grid stabilization benefits with 14.1–22.6% peak reductions across scenarios. Economic analysis revealed attractive investment returns with payback periods of 4.7–5.7 years and positive net present values exceeding $28,950 –62,150 over 10-year periods. PV integration achieved exceptional renewable energy self-consumption ratios of 83.4–84.9%, substantially exceeding conventional installations. The validated framework demonstrates that bidirectional EV-building integration represents a transformative approach for commercial building decarbonization, providing simultaneous energy, environmental, and economic benefits across diverse climatic conditions. © The Author(s) 2025.
الكلمات المفتاحية: Bidirectional charging Building energy management Carbon emissions reduction Electric vehicle integration Vehicle-to-building
Abed A.M.; Madaminov S.; Abduvokhidov A.; Khudoynazarov E.; Ibrahim W.
International Journal of Low-Carbon Technologies , Vol. 21, pp. 1-21
Article Open Access English ISSN: 17481317
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Transport Systems, Urgench State University, Kh. Alimdjan str. 14, Urgench, 220100, Uzbekistan; Department of Mathematics, National Research University TIIAME, Kori Niyoziy 39, Tashkent, 100000, Uzbekistan; Department of Mathematics, University of Tashkent for Applied Sciences, Str. Gavhar 1, Tashkent, 100149, Uzbekistan; Mamun University, Department of Exact sciences, Bolkhovuz Street 2, Khiva, 220900, Uzbekistan; Department of Mathematics, Ambo University, Ambo, Ethiopia
This study develops a topology-aware multiagent reinforcement learning framework that coordinates distributed renewables and storage for transmission-level control. Using a 24-month Saudi Eastern Province dataset, the framework reduces curtailment by up to 69.1% versus traditional economic dispatch and 10.3% versus MPC, cuts total annual operating costs by 27.9%, maintains frequency within ±0.1 Hz during 97.3% of periods, and adapts with 234 ms median latency. Emissions decrease by 0.85 to 1.46 Mt CO2-equivalent annually. Results demonstrate scalable, sub-second control that improves stability and economics while enabling higher renewable integration. © The Author(s) 2026. Published by Oxford University Press.
الكلمات المفتاحية: distributed renewable electricity energy storage systems graph neural networks multiagent reinforcement learning smart grid optimization
Togun H.; Basem A.; Abed A.M.; Mohammed H.I.; Hussein A.K.; Rashid F.L.; Al-Obaidi M.A.; Maarof H.A.; Younis O.; Ali B.; Hussain H.H.; Hadi F.A.; Roomi T.O.; Al-Timimi Y.K.
Energy and Environment
Review English ISSN: 0958305X
Thi-Qar Technical College, Southern Technical University, Basrah, Iraq; Advanced Technical College, University of Warith Al-Anbiyaa, Karbala, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, Iraq; College of Engineering, Mechanical Engineering Department, University of Babylon, Babylon City, Hilla, Iraq; Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq; Middle Technical University, Technical Instructor Training Institute, Baghdad, Iraq; Department of Physics, College of Science, University of Halabja, Kurdistan Region, Halabja, Iraq; Department of Mechanical Engineering, College of Engineering in Wadi Alddawasir, Prince Sattam Bin Abdulaziz University, Al-Kharj, Saudi Arabia; Department of Mechanical Engineering, Faculty of Engineering, University of Khartoum, Khartoum, Sudan; School of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen, China; Department of Atmospheric Science, College of Science, Mustansiriyah University, Baghdad, Iraq; Department of Renewable Energy Science, College of Energy and Environmental Science, Al-karkh University of Science, Baghdad, Iraq
This paper analyses the nation's advancements in renewable energy in Iraq from 2013 to 2023, emphasizing the potential of solar, wind, and biomass technologies. Iraq possesses substantial renewable energy resources, with an estimated technical potential of 500 MW from solar energy, as it receives an average daily solar irradiance of 5–6 kWh/m2, in addition to more than 200 MW of existing wind power capacity. Nonetheless, a number of obstacles still existed such as insufficient legislative frameworks, grid interconnection concerns, and substantial initial investment costs impede large-scale implementation. The transition into renewable energy necessitates significant expenditures, projected in the billions of dollars, to develop infrastructure, facilitate research, and promote adoption. The research finds that solar and wind energy might diminish Iraq's carbon footprint by 30–40% during the next twenty years. The analysis examines governmental measures and methods to accelerate the transition, encompassing financial incentives, regulatory reforms, and public awareness campaigns. By confronting these problems and utilizing its extensive renewable resources, Iraq may attain a sustainable energy future, alleviating economic and environmental pressures while guaranteeing long-term energy security. © The Author(s) 2026
الكلمات المفتاحية: geothermal energy policy frameworks and grid integration Renewable energy development solar photovoltaic capacity sustainable energy transition wind power feasibility assessments
Smaisim G.F.; Alayi R.; Abed A.M.; Aladdin M.
Energy Exploration and Exploitation
Article Open Access English ISSN: 01445987
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Najaf, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Najaf, Iraq; Department of Mechanics, Ge.C., Islamic Azad University, Germi, Iran; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Mechanics, Kabul University, Kabul, Afghanistan
The growing demand for sustainable energy conversion systems has motivated the development of more efficient solar thermal technologies. Conventional collectors using water or oxide-based nanofluids often suffer from limited heat-transfer capability, poor stability, and high exergetic losses under variable solar conditions. High-altitude regions such as Kabul—characterized by strong solar irradiance, low ambient temperatures, and reduced convective losses—provide ideal conditions for advanced nanofluid-based solar collectors; however, existing studies mainly address isolated energetic or exergetic aspects and lack an integrated sustainability evaluation. This work fills this gap by presenting the first comprehensive 5E (energy, exergy, economic, exergoeconomic, and exergoenvironmental) assessment of an evacuated-tube solar collector operating with molybdenum disulfide (Mos2)/water nanofluid under mountainous climatic conditions. A closed-loop MATLAB–Fluent–EES framework is developed to quantify thermal–hydraulic interactions and sustainability indicators. Results show that at the optimal operating condition of 1 vol% MoS2 and 0.06 kg/s, the collector achieves an average 25% increase in thermal efficiency, 22% improvement in exergy efficiency, and nearly 375% enhancement in useful heat gain, while the levelized cost of energy (LCOE) decreases from 0.108 to 0.078 $/kWh and the specific exergy cost drops to 0.110 USD/kWh-exergy. Environmentally, the exergo-environmental efficiency improves by approximately 15% despite the small rise in pumping power. These results demonstrate that the MoS2/water nanofluid provides an effective, stable, and economically viable working medium for high-altitude solar-thermal systems and establishes a new benchmark for 5E-integrated collector design. © The Author(s) 2026. This article is distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 License (https://creativecommons.org/licenses/by-nc/4.0/) which permits non-commercial use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access page (https://us.sagepub.com/en-us/nam/open-access-at-sage).
الكلمات المفتاحية: energy efficiency environmental impact exergoeconomic MoS<sub>2</sub>nanofluid solar collector
Said M.A.; Abed A.M.; Safarova L.; Jumanazarov D.; Khudoynazarov E.; Yadav B.K.; Ben Khedher N.
International Journal of Energy Research , Vol. 2026 (1)
Article Open Access English ISSN: 0363907X
Department of Architectural Engineering, College of Engineering, University of Ha’il, Ha’il City, 81451, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Information Technologies, Natural and Exact Sciences, Samarkand State University of Veterinary Medicine, Livestock and Biotechnologies, Samarkand, 140103, Uzbekistan; Department of Mathematics, University of Tashkent for Applied Sciences, Street Gavhar 1, Tashkent, 100149, Uzbekistan; Department of Physics, Urgench State University, Kh. Alimdjan Street 14, Urgench, 220100, Uzbekistan; Department of Exact Sciences, Mamun University, Bolkhovuz Street 2, Khiva, 220900, Uzbekistan; Department of Mechanical Engineering, Tribhuvan University (TU), Institute of Engineering (IOE), Purwanchal Campus08, Dharan, Nepal; Department of Mechanical Engineering, College of Engineering, University of Ha’il, Ha’il City, 81451, Saudi Arabia
Buildings account for ~40% of global energy consumption, with cooling loads dominating in hot and arid climates. Double-skin façades (DSFs) represent promising building envelope technologies for energy efficiency enhancement, yet standardized optimization methodologies for such climatic conditions remain limited. This study aimed to develop and validate a comprehensive multiobjective optimization framework integrating machine learning algorithms with building energy simulation (BES) to optimize DSF performance in residential buildings under hot and arid climatic conditions. The research employed EnergyPlus and DesignBuilder to simulate 2500 unique DSF configurations using Latin Hypercube Sampling (LHS) across varied design parameters including cavity depth, glazing properties, and ventilation strategies. XGBoost regression models were trained to predict heating loads, cooling loads, and environmental impacts. The Nondominated Sorting Genetic Algorithm II (NSGA-II) was implemented using XGBoost models as fitness functions for multiobjective optimization targeting energy consumption, cost, and thermal comfort in Saudi Arabian climatic conditions. XGBoost models achieved exceptional prediction accuracy with R2 values exceeding 0.94 and mean absolute percentage errors (MAPEs) below 4.5%. Optimal DSF configurations demonstrated energy consumption reductions of 35.7–42.3% compared to conventional single-skin façades, with corresponding and thermal comfort improvements of 58.1–78.9%. Economic analysis revealed favorable investment characteristics with payback periods of 3.1–4.2 years and net present values exceeding SR 975/m2. The framework achieves substantial reductions in computational time, with surrogate-based predictions enabling near-instant evaluation of new DSF configurations, thus making optimization feasible for practical design applications. The demonstrated economic viability and computational efficiency establish practical foundations for sustainable building design implementation in hot and arid regions. Copyright © 2026 Mohamed Ahmed Said et al. International Journal of Energy Research published by John Wiley & Sons Ltd.
الكلمات المفتاحية: building energy efficiency double-skin façade multiobjective optimization NSGA-II XGBoost
Zhang Y.; AL-Huqail A.A.; Abed A.M.; Brahmia A.
Environmental Research , Vol. 293
Article English ISSN: 00139351
Guangling college, Yangzhou university, Yangzhou, China; Department of Biology, College of Science, Princess Nourah bint Abdulrahmann University, P.O.Box 84428, Riyadh, 11671, Saudi Arabia; Mechanical Power Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Chemistry, College of Science, King Khalid University, P.O. Box 9004, Abha, 61413, Saudi Arabia
Municipal Solid Waste (MSW) management remains a critical urban challenge, with existing systems often constrained by inefficiencies, high operational costs, and environmental impacts. While prior studies have applied optimization or digital technologies separately, there is still a lack of integrated approaches that combine operational efficiency with transparency and sustainability. This study addresses this gap by proposing a novel framework that integrates Reinforcement Learning (RL) for route optimization with blockchain for secure and transparent transaction recording in MSW management. The methodology employs a synthetic but realistic dataset of 1000 collection points, incorporating waste type, volume, distance, fuel use, and operational costs. The RL model processes these as input states to determine optimal routing actions that minimize Travel Distance (TD) and emissions while improving efficiency. The resulting outputs optimized routes, waste volumes, costs, and emissions are recorded on a blockchain, ensuring transparency and immutability. The experimental design compares the RL–blockchain framework against traditional collection methods, with performance evaluated through Material Savings (MS), energy savings, CO2 Emission Reductions (CER), and cost efficiency. Results show that the integrated system achieves MS of 395,342.6 kg, energy savings of 142,763.8 kWh, carbon emission reductions of 35,589.4 kg CO2eq, and Cost Savings (CS) of USD 2,812,476.3 relative to traditional methods. Overall, this study contributes a scalable, transparent, and sustainable decision-support model for urban waste management, offering practical applications for municipalities seeking to reduce costs and environmental burdens while enhancing accountability. © 2025
الكلمات المفتاحية: Blockchain Municipal solid waste Optimization Reinforcement learning Sustainability Waste management
Meng J.; Abed A.M.; Elsehrawy M.G.; Al Agha A.; Abdullah N.; Elattar S.; Abbas M.; AL Garalleh H.; Assilzadeh H.
Heliyon , Vol. 12 (1)
Erratum Open Access English ISSN: 24058440
College of Foreign Languages, Jilin Agricultural University, Jilin Province, Changchun City, China; Mechanical power Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Prince Sattam Bin Abdulaziz University, College of Applied Medical Sciences, Saudi Arabia; Nursing Faculty, Port-Said University, Egypt; Department of Mathematical Science, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Industrial & Systems Engineering, College of Engineering, Princess Nourah bint Abdulrahman University, P.O.Box 84428, Riyadh, 11671, Saudi Arabia; Electrical Engineering Department, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Faculty of Architecture and Urbanism, UTE University, Calle Rumipamba S/N and Bourgeois, Quito, Ecuador; Institute of Research and Development, Duy Tan University, Da Nang, Viet Nam; School of Engineering & Technology, Duy Tan University, Da Nang, Viet Nam; Department of Biomaterials, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences, Chennai, 600077, India
This article has been retracted: please see Elsevier policy on article withdrawal (https://www.elsevier.com/about/policies-and-standards/article-withdrawal). This article has been retracted at the request of the Editor. Post-publication, an investigation conducted by Elsevier's Research Integrity & Publishing Ethics team on behalf of the journal identified references that are irrelevant to the article. The authors were asked to comment upon the presence of these references in their work but were unable to satisfactorily address the reason for the references. The investigation also discovered suspicious changes in authorship between the original submission and the revised version of this paper. During revision, 9 authors were added to the paper and 3 authors were removed from the paper. The Editor reached out to the authors for an explanation, but they failed to provide a satisfactory explanation to these changes. While the authorship change was approved by the journal at the time, in light of the new investigation the Editor has determined that the authorship, integrity and findings of the article cannot be relied upon, and has decided to retract the article. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. The authors disagree with the retraction and dispute the grounds for it. © 2025 .
Abed A.M.; DAMMAK B.; Hajlaoui K.; Kumar R.; Kalimbetov G.P.; Makhanova M.A.; Safarova L.; Sabirov S.; Dauletov A.; Ben Khedher N.
Journal of Thermal Analysis and Calorimetry , Vol. 151 (3), pp. 2485-2504
Article English ISSN: 13886150
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Computer Science, Applied College, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh, Saudi Arabia; College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh, Saudi Arabia; Karnavati School of Research, Karnavati University, Gujarat, India; Department of Power Engineering, ALT University Named After Mukhamedzhan Tynyshpayev, 97 Shevchenko Str, Almaty, 050012, Kazakhstan; Kazakh Agrotechnical University Named After. S.Seifullina, Zhenis Ave., 62, Astana, 010011, Kazakhstan; New Uzbekistan University, Movarounnahr Street 1, Tashkent, 100000, Uzbekistan; Samarkand State University of Veterinary Medicine, Livestock and Biotechnologies, Samarkand, 140103, Uzbekistan; Kimyo International University in Tashkent, Shota Rustaveli Street, 156, Tashkent, 100121, Uzbekistan; Alfraganus University, Yukori Karakamish Street 2a, Tashkent, 100190, Uzbekistan; Department of Mechanical Engineering, College of Engineering, University of Ha’il, Ha’il City, 81451, Saudi Arabia
The purpose of this study is to develop an integrated analytical-machine learning framework for optimizing heat transfer in unsteady squeezing nanofluid flow between parallel plates. The research employs a higher-order Akbari–Ganji method (AGM) coupled with random forest regression to quantify the effects of squeeze number S(S<0: squeezing; S>0: expansion), Eckert squeeze number (S), Eckert number (Ec), and nanoparticle volume fraction (ϕ) on thermal performance. Four nanoparticles (TiO2, Al2O3, Ag, Cu) dispersed in water were analyzed. The key findings demonstrate that: (1) The higher-order AGM achieved exceptional accuracy with maximum deviations of 3 × 10⁻⁷ for temperature and 5 × 10−8 for velocity profiles compared to numerical solutions; (2) machine learning analysis revealed Eckert number as the dominant parameter with 75.7% influence on Nusselt number, followed by volume fraction (12.3%) and squeeze number (12.0%); (3) increasing Ec from 0.5 to 2.0 resulted in 300% enhancement in Nusselt number; (4) silver nanoparticles provided 35% higher heat transfer rate compared to Al₂O₃ at ϕ = 0.05, though with 28% increase in friction factor; (5) optimal operating conditions were identified as Ec = 1.5–2.0, ϕ = 0.05–0.06, and S = − 1.0 to − 0.3, achieving maximum Nusselt number of 15.13. The integrated framework offers practical design guidelines for thermal management systems in microelectronics cooling, photovoltaic systems, and microfluidic heat exchangers, with potential for 40–50% improvement in heat transfer efficiency compared to conventional approaches. © Akadémiai Kiadó Zrt 2025.
الكلمات المفتاحية: Akbari–Ganji method Heat transfer optimization Machine learning Nanofluid Random forest Squeezing flow
2025
77 بحث
Ben Khedher N.; Mohammed H.I.; Abed A.M.; Biswas N.; Togun H.; Hammoodi K.A.; Mahdi J.M.; Talebizadehsardari P.
International Journal of Heat and Mass Transfer , Vol. 236
57 استشهاد Article Open Access English ISSN: 00179310
Department of Mechanical Engineering, College of Engineering, University of Ha'il, Saudi Arabia; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, Iraq; Department of Power Engineering, Jadavpur University, Kolkata, Salt Lake, 700106, India; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Air-conditioning and Refrigeration Engineering Techniques Department, College of Engineering, University of Warith Al-Anbiyaa, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Power Electronics, Machines and Control (PEMC) Research Group, University of Nottingham, Nottingham, United Kingdom
Inherent fluctuations in the availability of energy from renewables, remain a substantial drawback to their widespread deployment worldwide which can be solved by energy storage solution. Energy storage can also help to bridge the mismatch between the energy supply and demand by storing the excess and/or off-peak energy. This study introduces curved fin inserts as another effective enhancer for the thermal performance of the shell-and-tube latent heat storage module with RT35 as the key phase-change material (PCM) component. Various fin curvature angles are explored using enthalpy-based numerical simulations. Their effects are quantified on the PCM liquid fraction, average PCM temperature, melting/solidifying durations, and energy storage/removal rates. During melting at inlet temperatures of 50–70 °C, fins considerably enhance the thermal response of PCM. Curved fins with a 180° curvature angle yield the fastest melting, reducing time by 145.7 % compared to straight fins. Higher HTF and PCM initial temperatures also accelerate melting. For solidification with heat transfer fluid (HTF) at 10–30 °C, curved fins boost rates up to 395.3 % over non-fin cases. Optimized designs cut solidification duration by 79.8 % at lower HTF temperatures. Results demonstrate curved fins maximize charging and discharging rates up to 542.7 % and 467.0 %, respectively. Energy densities improve by 556.3 % against non-finned baselines. The outcomes provide important insights into the designing of efficient PCM-based storage components through the proper employment of tailored fin geometries. © 2024 Elsevier Ltd
الكلمات المفتاحية: Energy efficiency Fin configurations Melting Phase change material Solidification
Togun H.; Basem A.; Kadhum A.A.H.; Abed A.M.; Biswas N.; Rashid F.L.; Lawag R.A.; Ali H.M.; Mohammed H.I.; Mandal D.K.
Solar Energy , Vol. 291
56 استشهاد Review English ISSN: 0038092X
Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, 10071, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; College of Medicine, University of Al-Ameed, Karbala, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India; Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq; Mechanical Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq; Department of Mechanical Engineering, Government Engineering College, Bihar, Samastipur, 848127, India
Photovoltaic/thermal (PV/T) systems serve a dual purpose by simultaneously generating electricity and thermal energy from solar radiation. However, their efficiency is hindered by excessive heat accumulation, reducing overall performance. This review explores advanced cooling strategies aimed at enhancing PV/T efficiency, encompassing both passive and active methods. Various techniques (such as air and liquid cooling, phase change materials (PCM), heat pipes, and hybrid approaches) are analyzed for their effectiveness in thermal regulation and energy optimization. The study delves into PV/T system fundamentals, thermal characteristics, and strategies for improving performance. It highlights recent advancements in hybrid cooling technologies, including the integration of nanofluids, fins, and PCM, and assesses their impact on system efficiency. Additionally, a comprehensive evaluation of life-cycle costs, feasibility, and existing challenges is provided, along with future perspectives on optimizing PV/T systems. By consolidating the latest innovations in PV/T cooling, this review offers valuable insights into strategies for improving system efficiency and expanding applications in sustainable energy. It highlights the importance of continued research and development to enhance performance and reduce costs, facilitating broader adoption of PV/T technology for global energy solutions. © 2025 International Solar Energy Society
الكلمات المفتاحية: Cooling strategy Hybrid techniques Photovoltaic/thermal (PVT) Solar energy utilization Sustainable energy Thermal management
Togun H.; Basem A.; Abdulrazzaq T.; Biswas N.; Abed A.M.; dhabab J.M.; Chattopadhyay A.; Slimi K.; Paul D.; Barmavatu P.; Chrouda A.
Applied Energy , Vol. 388
47 استشهاد Article English ISSN: 03062619
Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, 10071, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Department of Chemical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Alnukhba University College, Baghdad, Iraq; Department of Mathematics, Government General Degree College, Ranibandh, West Bengal, Bankura, 722 135, India; Energetic and Thermal Studies Systems Laboratory, National Engineering College, University of Monastir, Ibn El-Jazzar Street, Monastir, 5019, Tunisia; Department of Mechanical Engineering, Faculty of Engineering, Universidad Tecnológica Metropolitana, Av. José Pedro Alessandri 1242, Santiago, Chile; Department of Chemistry, College of Science at Zulfi, Majmaah University, Zulfi, 11932, Saudi Arabia
The global push for cleaner transportation has led to significant developments in sustainable vehicle technologies, specifically Battery Electric Vehicles (BEVs) and Fuel Cell Electric Vehicles (FCEVs). This review presents a thorough examination of the progress, energy efficiency, environmental impacts, and the challenges associated with both vehicle types. BEVs, powered by lithium-ion batteries, have experienced remarkable advancements due to improvements in energy density, reduced costs, and the expansion of charging networks. In contrast, FCEVs, which generate electricity using hydrogen fuel cells, provide the advantage of rapid refueling and extended driving range but are constrained by the high costs of hydrogen production and limited refueling infrastructure. The review compares the energy efficiency of both technologies, noting that BEVs convert 70–90 % of stored electricity into motion, while FCEVs face higher energy losses due to the hydrogen production and conversion process. The paper also addresses the full lifecycle environmental impact of both technologies. Although both BEVs and FCEVs produce zero tailpipe emissions, their overall sustainability depends largely on how their energy—whether electricity or hydrogen—is sourced. BEVs are supported by the increasing shift toward electrification, with falling battery prices and more extensive infrastructure making them the leading option in sustainable transportation. Meanwhile, FCEVs, though better suited for long-range and heavy-duty use, continue to struggle with high production costs and a lack of necessary infrastructure. While BEVs currently dominate due to their higher energy efficiency, lower costs, and growing infrastructure, FCEVs remain a promising solution for specific applications that require fast refueling and long-range capabilities. Future innovations in hydrogen production and fuel cell technology, along with infrastructure expansion, could establish FCEVs as a vital complement to BEVs in the transition to zero-emission transport. © 2024
الكلمات المفتاحية: Battery electric vehicles Energy efficiency Fuel cell Hydrogen production
Togun H.; Basem A.; Jweeg M.J.; Biswas N.; Abed A.M.; Paul D.; Mohammed H.I.; Chattopadhyay A.; Sharma B.K.; Abdulrazzaq T.
Solar Energy , Vol. 291
26 استشهاد Review English ISSN: 0038092X
Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, 10071, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Al-Farahidi University, College of Technical Engineering, Baghdad, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Physics Department, College of Education, University of Garmian, Kurdistan Region, Kalar, Iraq; Department of Mathematics, Government General Degree College, Ranibandh, West Bengal, Bankura, 722 135, India; Department of Mathematics, Birla Institute of Technology and Science, Pilani, India; Department of Chemical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq
The convergence of Organic Photovoltaic (OPV) technology and artificial intelligence (AI) is examined in this review as a promising approach to advancing sustainable energy solutions. Recognized for their lightweight, flexible, and cost-effective properties, OPVs are highlighted as viable alternatives within renewable energy applications, particularly suited for integration in building infrastructure and portable energy sources. A discussion of OPV mechanisms and structures, such as single-layer, bilayer, and bulk heterojunction cells, is provided to outline the unique efficiencies and challenges each architecture presents. AI, especially through machine learning (ML) and deep learning (DL) models, is shown to transform OPV research, enhancing both material discovery and device optimization. Through AI-driven processes, rapid predictions of power conversion efficiency (PCE), material selection automation, and high-throughput screening are achieved, effectively minimizing experimental time and cost. Recent developments in AI applications, including convolutional neural networks (CNNs) and Bayesian optimization, are reviewed for their contributions to improving OPV performance, stability, and scalability. Case studies are included to demonstrate AI's impact in areas such as predictive modeling, real-time monitoring, and optimization of device architecture, all of which contribute to efficiency gains and improved material durability. Challenges, however, are noted, with data quality issues, the need for interdisciplinary collaboration, and gaps in AI-aided material innovation identified as key areas for ongoing development. This review highlights how the intersection of AI and OPV technology not only accelerates the path toward efficient, scalable renewable energy but also underscores the importance of interdisciplinary research in advancing sustainable, high-performance photovoltaic solutions. © 2025 International Solar Energy Society
الكلمات المفتاحية: Artificial intelligence (AI) Device optimization Machine learning (ML) Photovoltaic efficiency Renewable energy technology
Al-Srayyih B.M.; Al-Manea A.; Saleh K.; Abed A.M.; Al-Amir Q.R.; Hamzah H.K.; Ali F.H.; Al-Rbaihat R.; Alahmer A.
Numerical Heat Transfer; Part A: Applications , Vol. 86 (5), pp. 1328-1352
25 استشهاد Article English ISSN: 10407782
Mechanical Engineering Department, College of Engineering, University of Babylon, Iraq; Mechanical Engineering Department, Al-Samawah Technical Institute, Al-Furat Al-Awsat Technical University, Iraq; School of Engineering, University of Southern Queensland, Toowoomba, QLD, Australia; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Mechanical Engineering, Faculty of Engineering, Tafila Technical University, Jordan; Department of Mechanical Engineering, Tuskegee University, AL, United States
This study investigates the consequences of introducing a pair of oscillating elliptical obstacles on the natural convection and entropy generation within a quarter-circle cavity that is filled with a water-based hybrid nanofluid. The Galerkin Finite Element Method was utilized to perform numerical simulations on a 2-dimensional cavity, where the outer wall was set to a low temperature and the inner wall was kept at a high temperature, while the other walls were adiabatic. The hybrid nanofluid containing Cu-Al2O3 nanoparticles was used. The impact of changes in the values of dimensionless parameters, such as the Rayleigh number, heated wall length, oscillation frequency, oscillation amplitude, and oscillation period, on the flow and heat transfer within the cavity was examined. Results showed that an increase in the length of the hot source resulted in a decrease in heat transfer rate and that increasing the Rayleigh number led to a significant increase in total entropy generation and heat transfer irreversibility. A drop in the average Bejan number was noted as the Rayleigh number increased, demonstrating the prevalence of entropy caused by fluid friction. The effect of changing the amplitude had a higher impact on the average Nusselt number compared to the frequency value. At low Rayleigh numbers, the average Nusselt number was higher when the elliptical obstacles oscillated in the same direction, while the opposite trend was observed at higher Rayleigh numbers. © 2023 Taylor & Francis Group, LLC.
الكلمات المفتاحية: Entropy generation Galerkin finite element method hybrid nanofluid natural convection oscillated elliptical obstacles cavity
Abed A.M.; Alhuyi Nazari M.; Ahmadi M.H.; Mukhtar A.; Kumar R.; Gharib N.
Sustainable Energy Technologies and Assessments , Vol. 73
25 استشهاد Review English ISSN: 22131388
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Institute of Research and Development, Duy Tan University, Da Nang, Viet Nam; School of Engineering & Technology, Duy Tan University, Da Nang, Viet Nam; Renewable Energy Department, School of Energy Engineering, College of Interdisciplinary Science and Technology, University of Tehran, Iran; Faculty of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran; Institute of Sustainable Energy, Putrajaya Campus, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, Kajang, 43000, Malaysia; School of Mechanical Engineering, Lovely Professional University, Punjab, India; College of Engineering and Technology, American University of the Middle East, Egaila, 54200, Kuwait
There is enormous potential in the Middle East region for power generation by employment of renewable energies, particularly solar. The purpose of this article is representation of the status of power generation by use of different renewable energy systems in some Middle Eastern countries and the challenges and opportunities related to the development of these systems. In this study, five resource-rich Middle Eastern countries including Iran, Saudi Arabia, Oman, Iraq and the United Arab Emirates (UAE) are considered to be analyzed in term of status of renewable energies for power generation. In this regard, the electricity generation status of these countries is focused. Furthermore, the policies and potentials of these countries are represented and discussed. Moreover, the challenges for development of renewable energy technologies for electricity development in these countries are represented and investigated. Among the considered countries for assessment of power generation by renewable energy sources, the UAE has the highest share of solar energy in generation of electricity. Moreover, there are ambitious plans and policies for clean electricity generation in Saudi Arabia and the UAE, while in Iran and Iraq the development of renewable energies for power generation is not very significant. The reasons that hinder development of renewable energy systems in these countries can be different. For example, war and political issues in Iraq and sanctions in Iran could be among the main reasons that hinder development of new energy systems based on renewable energy sources. It can be stated that despite the considerable potential in these countries for exploitation of renewable energy sources for power generation, utilization of these sources is limited. In this regard, promotion of social awareness, incrementing economic incentives and advanced planning are needed to accelerate the renewable energies development. © 2024
الكلمات المفتاحية: Middle East Power generation Renewable energies Solar photovoltaic
Hasan H.A.; Togun H.; Abed A.M.; Mohammed H.I.; Armaghani T.
Renewable and Sustainable Energy Reviews , Vol. 208
22 استشهاد Article English ISSN: 13640321
Ministry of Higher Education & Scientific Research, Department of Studies, Planning & Follow-up Baghdad, 10011, Iraq; Electromechanical Engineering Department, University of Technology, Baghdad, 10066, Iraq; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department Of Cooling And Air Conditioning Engineering, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq; Department of Engineering, West Tehran Branch, Islamic Azad University, Tehran, Iran
Temperature is recognized to have a major impact on the safety, performance, and cycle life of lithium-ion batteries (LiBs). Since LiB cells are sensitive to temperature variations, even little variations can result in a reduction in performance or even cell failure. This work introduces a novel cooling system utilizing SiO2-Water Nanofluid and CFD analysis to enhance the thermal management of lithium-ion battery packs with varying silicon dioxide nanoparticle diameters. The results showed that SiO2 nanofluids with smaller nanoparticle diameters had higher average Nusselt numbers at all Reynolds numbers. This is because smaller nanoparticles have a larger surface area, which increases the collision rate of the nanoparticles with the fluid and thus enhances heat transfer. The increase in Nusselt number was found to be 2.8 %, 5.5 %, 11.6 %, and 22.6 % for nanoparticle sizes of 50, 40, 30, and 20 nm, respectively. The results also showed that for all particle sizes, the temperature of cell 4 equalled the inlet temperature at Re = 30,000. This is because cell 4 is located at the first column of the system and is oriented towards the entrance section, which results in a large temperature difference between the cell and the coolant. Cell 4, therefore, experiences a higher heat discharge to the coolant than the other cells. Overall, this study has shown that smaller nanoparticles and higher Reynolds numbers significantly improve the heat exchange capacity of LiB cells. This can lead to improved electrical properties and extended battery cell lifespan. © 2024 Elsevier Ltd
الكلمات المفتاحية: Cooling system Heat transfer augmentation Lithium-ion battery Nanofluids Nanoparticles diameter Silicon dioxide
Togun H.; Basem A.; Mohammed H.I.; Biswas N.; Abed A.M.; Rashid F.L.; Maarof H.A.; Hamdi J.D.; Hussein A.K.; Paul D.
International Communications in Heat and Mass Transfer , Vol. 165
20 استشهاد Review English ISSN: 07351933
Thi-Qar Technical College, Southern Technical University, Basrah, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Department of Cooling and Air Conditioning Engineering, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq; Department of Physics, College of Science, University of Halabja, Kurdistan Region, Halabja, Iraq; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, 10071, Iraq; College of Engineering, Mechanical Engineering Department, University of Babylon, Hilla, BabylonCity, Iraq
Phase Change Materials (PCMs) offer significant potential to enhance the efficiency and reliability of solar energy systems by mitigating energy supply intermittency. This review explores the classification, properties, and integration of PCMs into solar technologies, including solar thermal collectors, photovoltaic (PV) systems, and concentrated solar power (CSP) systems. PCMs store and release thermal energy via phase transitions, with key thermophysical properties—such as high latent heat of fusion, thermal conductivity, and phase stability—being vital for improving energy storage and system performance. PCMs are classified into organic, inorganic, and eutectic types, each with distinct advantages and limitations. Organic PCMs (e.g., paraffins) are chemically stable and non-corrosive but have low thermal conductivity. Inorganic PCMs (e.g., salt hydrates) offer higher conductivity and storage capacity but face challenges like phase segregation and corrosion. Eutectic PCMs combine organic and inorganic elements, offering tunable melting points and enhanced thermal properties. The review highlights novel integration methods—encapsulation, impregnation, and nanoparticle incorporation—to improve PCM performance. Economic considerations, including cost-effective materials and sustainable manufacturing, are discussed. Emerging developments, such as composite PCMs and nanomaterials, are identified as key areas for future research, underscoring PCMs' role in advancing solar energy storage and supporting a sustainable energy future. © 2025 Elsevier Ltd
الكلمات المفتاحية: Melting point Phase change materials (PCMs) Solar energy storage Solar thermal collectors Thermal energy storage
Ahmed S.Y.; Al-Amir Q.R.; Hamzah H.K.; Ali F.H.; Abed A.M.; Al-Manea A.; Egab K.; Al-Rbaihat R.; Saleh K.; Alahmer A.
Numerical Heat Transfer, Part B: Fundamentals , Vol. 86 (9), pp. 2830-2855
16 استشهاد Article English ISSN: 10407790
Mechanical Engineering Department, College of Engineering, Babylon University, Babylon, Iraq; College of Engineering and Technology, Mustaqbal University, Babylon, Iraq; Al-Furat Al-Awsat Technical University, Najaf, Iraq; Southern Technical University, Thiqar Technical College, Basra, Iraq; Department of Mechanical Engineering, Faculty of Engineering, Tafila Technical University, Jordan; School of Engineering, University of Southern Queensland, Toowoomba, QLD, Australia; Department of Mechanical Engineering, Tuskegee University, AL, United States
This study examines the natural convection heat transfer (NCHT) and entropy generation (EG) of a non-Newtonian (NN) flow inside an odd-shaped cavity filled with molten polymer. The cavity configuration comprises hot internal walls, cold external walls, and insulated remaining walls. The finite difference lattice Boltzmann method (FDLBM) is employed to solve the governing equations involved. The input parameters span a range of values, with Rayleigh number (Ra) varying from 104 to 105, power-law index (n) covering a range from 0.5 to 1.5, and width ratio (WR) ranging from 0.2 to 0.4, while maintaining Prandtl number (Pr) at a constant value of 10. The results revealed that at Ra values of 104 and 105, the overall entropy increases as the WR increases from 0.2 to 0.4 and decreases as the n index increases. In contrast to dilatant fluids, where heat transfer (HT) decreases as the n index increases from 1 to 1.5, pseudo-plastic fluids show an opposite trend with HT increasing as the n index decreases from 1 to 0.5. This trend is attributed to the general decrease in the average Nusselt number (Nu) as the n index increases. Additionally, it is observed that the n index has no significant impact on the average Nu due to low buoyancy force at Ra = 104 and WRs of 0.2 and 0.3. However, it notably influences the Bejan number (Be) across all WRs. Overall, the present model demonstrates excellent agreement with previous numerical results, affirming the FDLBM as a superior, reliable, and well-suited technique for relevant applications. These results suggest the potential to extend the application of the FDLBM approach to various cavity shapes, allowing for a comprehensive exploration of NCHT and EG under various conditions. © 2024 Taylor & Francis Group, LLC.
الكلمات المفتاحية: Entropy generation FDLBM molten polymer natural convection Non-Newtonian odd-shaped cavity
Togun H.; Basem A.; Abdulrazzaq T.; Biswas N.; Abed A.M.; Dhabab J.M.; Mohammed H.I.; Sharma B.K.; Paul D.; Barmavatu P.
Sustainable Materials and Technologies , Vol. 43
14 استشهاد Review English ISSN: 22149929
Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, 10071, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Department of Chemical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Alnukhba University College, Baghdad, Iraq; Physics department, College of Education, University of Garmian, Kurdistan Region, Kalar, Iraq; Department of Mathematics, Birla Institute of Technology and Science, Pilani, India; Department of Mechanical Engineering, Faculty of Engineering, Universidad Tecnológica Metropolitana, Av. José Pedro Alessandri 1242, Santiago, Chile
The growing need for sustainable energy alternatives and the environmental impact of fossil fuel use has driven the search for more efficient bioenergy production methods. Lignocellulosic biomass is a key renewable resource, but its intricate structure presents significant challenges in conversion to biofuels. Nanotechnology deals with advanced solutions to these hurdles by improving biomass pre-treatment, enhancing the efficiency of biofuel generation, and refining downstream processing methods. This review article explores the role of several nanomaterials (such as carbon-based materials (graphene, carbon nanotubes), metal nanoparticles (iron oxide, nickel oxide), and advanced structures like metal-organic frameworks (MOFs)) in advancing bioenergy generation. These nanomaterials, along with their higher surface area and unique catalytic properties, meaningfully increase enzymatic hydrolysis, microbial activity, and overall conversion efficacy. Recent developments in the field have revealed that nanocatalysts can intensify biofuel yields by up to 80 %, improving enzyme stability and allowing for repeated use of catalysts. However, numerous challenges need to be addressed, including the higher costs associated with nanomaterial production, issues of scalability, and concerns about the potential environmental effect of these materials. To overcome these burdens, further intensive research is needed to develop more eco-friendly, biodegradable nanomaterials and establish consistent conventions for their safe and sustainable use in the bioenergy process. This review article highlights the critical role of nanotechnology in the future of bioenergy production and offers a detailed analysis of recent achievements, trends, and future directions. The outcomes of this study aim to stimulate continued innovation in nanotechnology applications, paving the way for more sustainable bioenergy solutions and reducing the carbon footprint in the global scenario. © 2025 Elsevier B.V.
الكلمات المفتاحية: Biohydrogen generation Efficient biofuel Nanotechnology Sustainable bioenergy
Cai R.; Li W.; Shaban M.; Abed A.M.; Abdullaev S.; Mahariq I.; Elmasry Y.; Abouzied A.S.; Alrawashdeh A.I.
Journal of Water Process Engineering , Vol. 69
13 استشهاد Article English ISSN: 22147144
School of Engineering, Hangzhou Normal University, Hangzhou, 310018, China; Department of Physics, Faculty of Science, Islamic University of Madinah, Madinah, 42351, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Department of Science and Innovation, Tashkent State Pedagogical University named after Nizami, Tashkent, Uzbekistan; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Applied Science Research Center, Applied Science Private University, Amman, Jordan; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Mathematics, College of Science, King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Hail, Hail, 81442, Saudi Arabia; Department of General Subjects, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Chemistry and Chemical Technology, College of Science, Tafila Technical University, Tafila, 66110, Jordan
A facile synthesis approach was employed to fabricate a binary Fe2O3/TiO2 nanocomposite (FeTi4-400) for enhanced photocatalytic hydrogen (H2) production, cephalexin degradation and CO2 reduction under visible light irradiation. Compared to pristine TiO2, FeTi4-400 exhibited improved visible light absorption and promoted charge carrier separation, leading to increased H2 production rate and CO2 conversion into CH4 and CO. This improvement can be attributed to the formation of an S-scheme heterojunction, along with the desirable properties of FeTi4-400, including visible light activity, high surface area, and strong CO2 adsorption. The photocatalyst achieved a maximum H2 production rate of 649 μmol/g·h−1, exceeding that of pure TiO2. Similarly, the highest CO production rate of 16.44 μmol/g·h−1 was attained with FeTi4-400. Furthermore, FeTi4-400 achieved excellent cephalexin degradation (96 %) under optimal conditions, with a degradation rate constant of 0.01 min−1. A plausible cephalexin degradation pathway over FeTi4-400 is proposed. Transient photocurrent measurements and EIS analysis corroborated a significant enhancement in photocatalytic activity for FeTi4-400, attributed to the efficient separation of photogenerated electron-hole pairs. Stability studies demonstrated consistent cephalexin degradation by FeTi4-400 over five consecutive cycles without noticeable photocatalyst deactivation. This work presents a novel strategy for fabricating low-cost, efficient, and readily synthesized nanomaterials for applications in solar energy conversion and environmental remediation. © 2024 Elsevier Ltd
الكلمات المفتاحية: CO<sub>2</sub> reduction Photocatalytic H<sub>2</sub> production RSM modeling S-scheme heterojunction Solar fuels Wastewater treatment
Yan C.; Abed A.M.; Shaban M.; Li X.; Zhou X.; Lei G.; Abdullaev S.; Mahariq I.
Journal of Water Process Engineering , Vol. 69
12 استشهاد Article English ISSN: 22147144
School of Economics and Management, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Physics, Faculty of Science, Islamic University of Madinah, Madinah, 42351, Saudi Arabia; School of Mathematics, Physics and Optoelectronic Engineering, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Department of Science and Innovation, Tashkent State Pedagogical University named after Nizami, Tashkent, Uzbekistan; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Applied Science Research Center, Applied Science Private University, Amman, Jordan; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
Solar-driven photocatalysis depicts an effective efficiency for producing hydrogen via water splitting, as well as for CO2 reduction and the degradation of hazardous pollutants in aqueous environment, playing a vital role in addressing the challenges associated with the environmental and energy crises. This study presents a synthesis of a Strontium Titanate/Zinc Oxide/Graphitic Carbon Nitride photocatalyst via an integrated sonochemical and wet impregnation method. The photocatalytic efficiency of various content (10 %, 20 %, 30 %, and 40 % wt%) of 40 wt% Titanate/Zinc Oxide loaded on Graphitic Carbon were investigated, with the 30 % loading demonstrating optimal performance. A complete identification of the synthesized materials was carried out using XPS, XRD, BET, TEM, DRS, SEM, EIS, Photocurrent, ESR, PL, and Mott–Schottky analyses. The BET scrutiny indicated a type IV isotherm with H2 hysteresis, representing a mesoporous construction. The improved photocatalytic activity of optimized composite was due to its structural features facilitating efficient electron-hole separation and charge transfer. RSM optimization identified the key parameters for achieving high Cefixime (CFX) degradation efficiency (96 %) at 29.91 mg/L CFX concentration, pH 4.55, 78 min of reaction time, and 0.65 g/L catalyst dosage. LC-MS analysis unveiled two proposed pathways for CFX photodegradation, and trapping experiments and ESR analysis highlighted superoxide and hydroxyl radicals as significant contributors. The synthesized photocatalyst exhibited excellent stability and reusability over five cycles. Hydrogen production showed an initial increase with Strontium Titanate/Zinc Oxide loading, peaking at 645.62 μmol g−1 h−1 at 30 wt%, before declining due to potential electron trapping effects. Notably, the SrZg-30 photocatalyst demonstrated a significantly higher CO production rate (0.97 μmol g−1 h−1) compared to SrTiO3/ZnO and g-C3N4 components. This work offers a viable approach to developing eco-friendly photocatalysts to tackle pressing environmental and energy crises. © 2024
الكلمات المفتاحية: CO<sub>2</sub> reduction Hydrogen production Photocatalysis process Wastewater treatment Water splitting
Al Arni S.; Aljibori H.S.S.; Mahdi J.M.; Abed A.M.; Yazdani S.; Shafi J.; Dhahbi S.; Ghalambaz M.
Journal of Energy Storage , Vol. 105
11 استشهاد Article English ISSN: 2352152X
Department of Chemical Engineering, University of Ha'il, Ha'il, 81441, Saudi Arabia; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, Iraq; Laboratory on Convective Heat and Mass Transfer, Tomsk State University, Tomsk, 634050, Russian Federation; Department of Computer Engineering and Information, College of Engineering in Wadi Alddawasir, Prince Sattam Bin Abdulaziz University, Wadi Alddawasir, 11991, Saudi Arabia; Applied College of mahail aseer, King Khalid University, Muhayil Aseer, 62529, Saudi Arabia; Department of Mathematics, Saveetha School of Engineering, SIMATS, Chennai, India
This numerical study explores dynamic melting as an enhancement strategy to improve heat transfer in thermal energy storage (TES) systems utilizing phase change materials (PCM) with openings. Optimizing such systems is crucial for advancing renewable energy storage and integration. A 3D model simulates RT35 PCM flowing through a shell-and-tube heat exchanger annulus. The effects of varying PCM inlet slot diameter (2.5–7.5 mm), inlet pressure (1–40 Pa), and inlet/outlet port positioning on melting fraction and temperature distributions are computationally evaluated. Results show that increasing slot diameter from 2.5 mm to 7.5 mm reduces melting time by 13.6 % (from 550 to 475 min). Raising inlet pressure from 10 Pa to 40 Pa cuts melting time by 43.8 % (from 400 to 225 min). However, varying inlet/outlet port positioning has negligible impact. Larger slot diameters and higher pressures produce more homogeneous melting across the radial width. A neural network approach revealed that port diameters around 5.5 mm maximized melting volume fraction at early stages, while increasing port size accelerated melting in later stages. This study provides quantitative data demonstrating that optimizing dynamic melting parameters through the annulus can substantially enhance heat transfer in open PCM-based TES systems. The novelty lies in systematically evaluating the effects of these design parameters on melting behavior and employing artificial intelligence to further analyze parameter interactions. © 2024 Elsevier Ltd
الكلمات المفتاحية: Dynamic melting Neural networks Phase change material Thermal energy storage
Yan G.; Yang X.; Shaban M.; Abed A.M.; Abdullaev S.; Alhomayani F.M.; Khan M.N.; Alkhalaf S.; Alturise F.; Albalawi H.
Energy , Vol. 320
11 استشهاد Article English ISSN: 03605442
School of Intelligent Manufacture, Chongqing Creation Vocational College, Chongqing, 402160, China; Department of Physics, Faculty of Science, Islamic University of Madinah, Madinah, 42351, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Department of Science and Innovation, Tashkent State Pedagogical University named after Nizami, Tashkent, Uzbekistan; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Department of Mechanical and Industrial Engineering, College of Engineering, Majmaah University, Al-Majmaah, 11952, Saudi Arabia; Department of Computer Engineering, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Cybersecurity, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Physics, College of Sciences, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia
The urgent need to address the global energy crisis and manage plastic waste has prompted innovative approaches at the intersection of environmental sustainability and technology. In this study, the synergistic integration of plastic waste gasification and solid oxide fuel cells (SOFCs) as a viable solution is explored. This research leverages regression machine learning algorithms to analyze and optimize this integrated energy system. The findings indicate a notable enhancement in accuracy with the implementation of non-linear machine learning algorithms compared to linear and quadratic counterparts. Specifically, the R-squared value for the electrical machine learning algorithm saw a noteworthy rise from 0.9146 (linear) and 0.9427 (quadratic) to 0.9990 (non-linear), reflecting improvements of around 0.0844 and 0.0563, respectively. It was established that the most favorable conditions entailed a steam to plastic waste ratio of 1.6, an SOFC temperature of 1113 K, and a current density of 2000 A/m2. These parameters resulted in an electrical efficiency of 41.89 %, an exergy efficiency of 37.70 %, and emissions totaling 860.71 kg/MWh. This study represents a breakthrough by demonstrating that the integration of plastic waste gasification with SOFCs can achieve an unprecedented electrical efficiency of 41.89 % through machine learning optimization. By significantly enhancing energy recovery from plastic waste, this approach not only mitigates environmental pollution but also offers a competitive edge over existing waste-to-energy solutions, positioning it as a viable pathway toward sustainable energy practices that can benefit industries and communities worldwide. © 2025 Elsevier Ltd
الكلمات المفتاحية: Artificial intelligence Gasification Machine learning Optimization Plastic waste-to-energy Sustainable energy
Zihao M.; Farouk N.; Singh P.K.; Abed A.M.; Samad S.; Babiker S.G.; Shernazarov I.; Hendy A.; Almadhor A.; Bouallegue B.; Afzal A.R.
Case Studies in Thermal Engineering , Vol. 65
10 استشهاد Article Open Access English ISSN: 2214157X
Technical Center of Power Transmission and Distribution Branch, Shanghai Electric Group Co., Ltd., China; Mechanical Engineering Department, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Mechanical Engineering Department, Faculty of Engineering, Red Sea University, Port Sudan, Sudan; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, U.P., Mathura, 281406, India; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Management Department, College of Business Administration, Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia; Department of Electronic Physics, Faculty of Applied Science, Red Sea University, Port Sudan, Sudan; Department of Chemistry and Its Teaching Methods, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Department of Computational Mathematics and Computer Science, Institute of Natural Sciences and Mathematics, Ural Federal University, 19 Mira St., Yekaterinburg, 620002, Russian Federation; Department of Mechanics and Mathematics, Western Caspian University, Baku, 1001, Azerbaijan; Department of Computer Engineering and Networks, College of Computer and Information Sciences, Jouf University, Saudi Arabia; Department of Computer Engineering, College of Computer Science, King Khalid University, ABHA, 61421, Saudi Arabia; Department of Industrial Engineering, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia
This paper presents a ground-breaking design for a multigeneration system capable of simultaneously producing electricity, hydrogen, and cooling loads. This research advances sustainable energy systems by introducing an innovative design that optimally utilizes waste heat and integrates biomass gasification with advanced thermodynamic cycles. It also provides a model for future studies on carbon emission reduction and improved efficiency. The proposed system effectively harnesses waste heat from the Brayton cycle to drive the supercritical carbon dioxide cycle, steam Rankine cycle, absorption refrigeration, and proton exchange membrane electrolyzer. This approach improves overall efficiency and offers a promising solution for integrated energy generation. Additionally, employing the sCO2 cycle provides high thermal efficiency, cost-effectiveness, and lower environmental impacts compared to traditional power generation methods. Extensive evaluations, including techno-economic and environmental analyses, confirm the system's practicality and potential for future commercial application. Additionally, a parametric investigation of five essential design parameters provides important insights into the system's performance and flexibility. Analysing the proposed system determined that the gasifier-Bryton unit has the highest irreversibility and cost rate among other subsystems. A novel approach combining artificial neural networks (ANN) with a non-dominated sorting genetic algorithm II (NSGA-II) has been developed to optimize the system, substantially reducing computational time and costs associated with system performance analysis. According to the three-objective optimization, the system in the optimal operating mode provides 45.89 kg/h of hydrogen with an exergy efficiency of 33.15 % and a total cost rate of 159.5 $/h. After the optimization process, significant achievements have been observed, including a 5.02 % improvement in exergy efficiency, an increase of 7.29 kg/h of hydrogen production, and a decrease of 0.1 ton/MW in the CO2 emission index. © 2024 The Authors
الكلمات المفتاحية: Biomass-based system Hydrogen production Multi-objective optimization Multi-thermal recovery Thermal analysis
Hussein A.K.; Rashid F.L.; Abed A.M.; Sultan H.S.; Togun H.; Attia M.E.H.; Manokar A.M.; Hamida M.B.B.; Ali B.; Younis O.; Khutar N.M.
International Journal of Energy and Water Resources , Vol. 9 (2), pp. 1145-1176
9 استشهاد Review English ISSN: 25383604
Mechanical Engineering Department, College of Engineering, University of Babylon, Babylon City, Hilla, Iraq; Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbalaa, 56001, Iraq; Biomedical Engineering Department, University of Thi-Qar, Nassiriya, 64001, Iraq; Physics Department, Faculty of Exact Sciences, University of El Oued, El Oued, 3900, Algeria; Department of Mechanical Engineering, B.S. Abdur Rahman Crescent Institute of Science and Technology, Tamil Nadu, Chennai, 600048, India; Department of Chemical Engineering, College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh, Saudi Arabia; Research Laboratory of Ionized Backgrounds and Reagents Studies (EMIR), Preparatory Institute for Engineering Studies of Monastir (IPEIM), University of Monastir, Monastir City, Tunisia; Higher School of Sciences and Technology of Hammam Sousse, Department of Physics, University of Sousse, Sousse, Tunisia; School of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen, 518055, China; Department of Mechanical Engineering, College of Engineering in Wadi Addwasir, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Mechanical Engineering, Faculty of Engineering, University of Khartoum, Khartoum, Sudan; Department of Computer Technical Engineering, Technical Engineering College, Al-Ayen University, Thi-Qar, Iraq
Fresh water is essential for day-to-day survival. The primary issue facing undeveloped nations is the continuous scarcity of clean water, and drinking contaminated water to survive may harm one’s health. Due to population expansion, there is less fresh water available. Boring wells, rainwater, and water from rivers or lakes are among the potential water sources. For isolated, arid, and semiarid regions, solar distillation is appropriate. Where there is a severe drinking water deficit and intense solar radiation. With free energy, straightforward, affordable technology, and a clean atmosphere, solar still (SS) partly meets man’s demand for drinking water, especially in distant locations. This review focuses on pyramid solar stills (PSS), highlighting their potential to meet drinking water demands with free, clean energy and simple technology. This paper comprehensively reviews numerical, experimental, and combined (numerical and experimental), discussing various setups, parameters, and results. Key advancements, performance improvements, and future research directions are outlined, emphasizing the importance of innovative designs and optimization for enhanced efficiency and freshwater production. © The Author(s), under exclusive licence to Iranian Society of Environmentalists (IRSEN) and Science and Research Branch, Islamic Azad University 2024.
الكلمات المفتاحية: Comprehensive review Pyramid solar still Remote regions Water desalination
Togun H.; Basem A.; Jweeg M.J.; Mohammed H.I.; Abed A.M.; Anqi A.E.; Chattopadhyay A.; Biswas N.
Journal of Thermal Analysis and Calorimetry , Vol. 150 (14), pp. 10725-10760
9 استشهاد Article English ISSN: 13886150
Thi-Qar Technical College, Southern Technical University, Basrah, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; College of Technical Engineering, Al-Farahidi University, Baghdad, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Mathematics, Government General Degree College, Ranibandh, West Bengal, Bankura, 722 135, India; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India
This paper analyzes the use of phase change materials (PCMs) as a cooling mechanism in photovoltaic systems to improve energy efficiency and sustainability. The use of phase change materials, recognized for their latent heat storage capabilities, is crucial for controlling photovoltaic panel temperatures and enhancing operational stability. This research examines several forms of PCMs, such as organic, inorganic, and bio-based substances, emphasizing their benefits and drawbacks in relation to thermal conductivity, recyclability, and environmental effects. The assessment includes innovations in encapsulation methods and the advancement of nano-enhanced PCMs for their contribution to optimizing thermal performance. Design options, including the incorporation of fin structures and hybrid systems that merge passive and active cooling techniques, are evaluated for their efficacy in various environmental contexts. Additionally, the issues of scalability, long-term dependability, and material deterioration are examined, along with prospective improvements related to intelligent control systems and real-time monitoring. The study emphasizes the necessity of reconciling cooling efficiency with economic and environmental factors, offering a thorough perspective on prospective research avenues. The findings underscore that continuous progress in material science and control systems is essential for the extensive use of PCM-based cooling in solar energy applications. © Akadémiai Kiadó Zrt 2025.
الكلمات المفتاحية: Encapsulation techniques Hybrid cooling systems Lifecycle assessment Nano-enhanced materials Renewable energy systems Thermal management
Togun H.; Basem A.; Jweeg M.J.; Mohammed H.I.; Abed A.M.; Anqi A.E.; Madheswaran D.K.; Hasan H.A.; Chattopadhyay A.; Talebizadehsardari P.
International Journal of Thermal Sciences , Vol. 215
8 استشهاد Review English ISSN: 12900729
Thi-Qar Technical College, Southern Technical University, Basrah, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Al-Farahidi University, College of Technical Engineering, Baghdad, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Green Vehicle Technology Research Centre, Department of Automobile Engineering, SRM Institute of Science & Technology, Kattankulathur Campus, TN, Chennai, 603 203, India; Ministry of Higher Education & Scientific Research, Department of Studies, Planning & Follow-up, Baghdad, 10011, Iraq; Department of Mathematics, Government General Degree College, Ranibandh, West Bengal, Bankura, 722 135, India; Power Electronics, Machines and Control (PEMC) Research Group, University of Nottingham, Nottingham, United Kingdom
The growing need for electric and hybrid vehicles (EHV) requires new technologies that can enhance battery performance, longevity, and safety. Efficient thermal management is an important factor that influences these parameters. Through the incorporation of phase change materials (PCMs), liquid and air cooling mechanisms, heat pipes (HP), and thermoelectric coolers (TECs), these systems attain exceptional thermal regulation, thereby minimizing temperature gradients and improving system adaptability in response to fluctuating thermal loads. This research describes a new Smart Hybrid Thermal Management System (S-HTMS) that optimizes the thermal management of battery packs in future EHVs. The suggested hybrid strategy combines liquid cooling and air-based or phase change material (PCM) systems to take benefit of both passive and active cooling strategies. The present article combines recent advances in HBTMS, including nanomaterial-enhanced PCMs, adaptive control techniques, and high-efficiency heat exchangers, all of which serve to maximize energy transfer and enable real-time thermal response. This review additionally outlines critical trade-offs in efficiency, cost, and design which govern the advancement of next-generation BTMS, which are vital for high-performance EV and HEV applications. The insights presented herein intend to establish a foundational framework for the design of battery systems that are not only safe and efficient but also sustainable, thereby contributing to the EV and HEV technology towards enhanced efficiency and reliability. © 2025 Elsevier Masson SAS
الكلمات المفتاحية: Adaptive cooling strategies AI-Driven thermal control Hybrid battery thermal management systems (HBTMS) Nano cooling technology Phase change materials (PCMs) Thermal runaway prevention
Said M.A.; Sultan Aljibori H.S.; Abed A.M.; Togun H.; Mohammed H.I.; Mahdi J.M.; Rahbari A.; Sadeq A.M.; Talebizadehsardari P.
Case Studies in Thermal Engineering , Vol. 69
8 استشهاد Article Open Access English ISSN: 2214157X
Architectural Engineering Department, University of Ha'il, Ha'il, Saudi Arabia; College of Engineering, University of Warith Al-Anbiyaa, Karbalaa, 56001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, Iraq; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Department of Physics, College of Education, University of Garmian, Kurdistan region, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; School of Engineering, The Australian National University, 2601, ACT, Australia; Mechanical and Industrial Engineering Department, College of Engineering, Qatar University, Doha, Qatar; Power Electronics,Machines and Control (PEMC) Institute, University of Nottingham, Nottingham, United Kingdom
The depletion of fossil fuel reserves and growing energy demand have increased the need for renewable energy sources with suitable heat storage systems. Latent heat thermal energy storage (LHTES) using phase change materials (PCMs) provides high energy density and efficiency. However, heat transfer to the PCM core remains a challenge. This study investigates step, sinusoidal, and zigzag channel designs within a horizontal triple-tube LHTES system to enhance PCM charging rates. The step function geometry offered superior performance, increasing heat storage rate by 145 % and reducing melting time by 51 % versus straight channels. Detailed parametric analysis revealed that reducing step width from 15 mm to 5 mm improved heat storage rate by 18 % and shortened melting time by 14 %. Lengthening steps from 5 mm to 15 mm enhanced heat storage rate by 88 % and accelerated melting by 48 %. The novel step design improved temperature distrbution, drove recirculation enhancing convection, and increased surface area. These insights can guide engineering of efficient LHTES systems, advancing sustainable energy storage solutions. © 2025 The Authors. Published by Elsevier Ltd.
الكلمات المفتاحية: Latent heat Melting Sinusoidal profile Step function profile Thermal energy storage Zigzag profile
Mei B.; Abed A.M.; Patel P.; Kulshreshta A.; Ayed H.; Mouldi A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 65
8 استشهاد Article Open Access English ISSN: 2214157X
College of Construction Engineering, Yunnan Agricultural University, Yunnan, Kunming, 650000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Marwadi University Research Center, Department of Mechanical Engineering, Faculty of Engineering & Technology Marwadi University, Gujarat, Rajkot, 360003, India; NIMS School of Mechanical and Aerospace Engineering, NIMS University Rajasthan, Jaipur, India; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Higher Institute of Transport and Logistics of Sousse, University of Sousse, Sousse, 4023, Tunisia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Mathematics, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Tamil Nadu, Chennai, 602105, India; Applied Science Research Center, Applied Science Private University, Amman, Jordan; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
This study unveils a specialised swirl flow generator called the twisted hyperbolic turbulator for implementation in heat exchangers. The design of this geometry aims to induce bidirectional swirling flow. The water fluid flows through a heated tube at Reynolds numbers ranging from 2316 to 5096. This study examined the thermal-frictional effects of the new turbulator at various twisting angles ranging from 60 to 360°. The results indicated that as the twist angle rises, heat transfer also increases because of the fluid's intensified swirling and radial motion. Under ideal circumstances, a twist angle of 360° results in a notable increase in heat transfer by 256 % and a pressure drop by 625 %, accompanied by a TEF of 1.84. Longitudinal perforations were added to the selected turbulator at varying dimensionless distances (R = h/r) from the center, ranging from 9 to 3.6, with dimensionless hole diameters (P = h/d) ranging from 9 to 4.5. The results indicated that as the hole distance from the center of the tube increased, the TEF decreased while increasing the diameter of the perforations led to an improvement in TEF. The optimal configuration was found to be at P = 4.5, located at R = 6, resulting in a TEF of 2.02. © 2024 The Authors
الكلمات المفتاحية: Heat exchanger Heat transfer Perforated twisted hyperbolic turbulator Pressure drop Turbulator
Sadeq B.R.; Basem A.; Abed A.M.; Al-lehaibi M.; AL-bonsrulah H.A.Z.; Elbashir N.B.M.
Results in Engineering , Vol. 25
7 استشهاد Article Open Access English ISSN: 25901230
Department of Medical Instrumentation Engineering Techniques, Al Safwa University College, Karbala, 56001, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Mechanical power Techniques Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Mechanical Engineering Department, College of Engineering and Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah, 24382, Saudi Arabia; Department of Mathematics, College of Science and Humanities, Prince Sattam bin Abdulaziz University, Al-kHARJ, 11942, Saudi Arabia
In current work, simulations of the freezing process within a tank featuring plus sign-shaped fins were conducted utilizing the Galerkin method. The focus was on unsteady heat transfer based on conduction, solving two coupled equations. The primary material in this investigation is water, which is strategically combined with CuO nanoparticles to improve cold energy preservation efficiency. The simulations are influenced by two critical factors: the shape and concentration of the nanoparticles. Considering these factors adds complexity to the study, facilitating a comprehensive exploration of their impacts on solidification within the plus sign-shaped fin container. Validation of the code against previous benchmarks has shown good accuracy. For water alone, the cold storage time is 1433 s, which significantly reduces to 1049.19 s with the introduction of nanoparticles. The substantial decrement in freezing time is observed with the augmentation of both ϕ and “m” (shape factor), approximately 7 % and 27 %, respectively. © 2025
الكلمات المفتاحية: Finned tank Nanomaterial Shape factor Solidification Unsteady conduction mode
Togun H.; Basem A.; Jweeg M.J.; Anqi A.E.; Abed A.M.; Alshamkhani M.T.; Mohammed H.I.; Chattopadhyay A.; Kadhim S.A.; Biswas N.
Sustainable Energy Technologies and Assessments , Vol. 82
7 استشهاد Review English ISSN: 22131388
Thi-Qar Technical College, Southern Technical University, Basrah, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Al-Farahidi University, College of Technical Engineering, Baghdad, Iraq; Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Fuel and Energy Engineering Department, Basrah Engineering Technical College, Southern Technical University, Basrah, Iraq; Physics Department, College of Education, University of Garmian, Kurdistan region, Kalar, Iraq; Department of Mathematics, Government General Degree College, Ranibandh, West Bengal, Bankura, 722 135, India; Mechanical Engineering Department, University of Technology- Iraq, Baghdad, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India
The rising global energy demand and the urgent need to reduce building-related energy consumption have intensified interest in passive thermal energy storage technologies. A major challenge remains the development of construction materials that can regulate indoor temperatures and enhance energy efficiency without increasing operational costs or compromising structural performance. This study aims to investigate the integration of phase change materials (PCMs) into gypsum plasterboard—a common interior surface material—to create thermally responsive building components for smart energy applications. Through a critical review of experimental studies, numerical simulations, and field applications, the research examines the thermal behavior, energy-saving potential, environmental benefits, and practical challenges associated with PCM-gypsum composites. Results consistently show that PCM-enhanced plasterboards can reduce indoor temperature fluctuations, decrease heating and cooling loads, and improve occupant comfort, particularly in climates with high diurnal variation. The selection of appropriate PCM type, melting temperature, and concentration is found to be crucial for maximizing performance. However, limitations such as high material costs, flammability concerns, long-term durability, and lack of standardization pose significant barriers to widespread implementation. The study concludes that while PCM-gypsum plasterboards present a promising solution for low-energy buildings, further research is required to optimize material formulations, improve fire resistance, and evaluate life-cycle performance to ensure cost-effective and safe adoption in mainstream construction practices. © 2025 Elsevier Ltd
الكلمات المفتاحية: Building envelope Energy efficiency in buildings Energy-saving Gypsum plasterboard PCM
Hussein A.K.; Rashid F.L.; Togun H.; Younis O.; Dhabab J.M.; Al-Sharify Z.T.; Abed A.M.; Homod R.Z.; Bounib M.; Singh D.; Ahmed A.
Environmental Technology Reviews , Vol. 14 (1), pp. 332-358
7 استشهاد Review English ISSN: 21622515
College of Engineering, Mechanical Engineering Department, University of Babylon, Babylon City, Iraq; Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Department of Mechanical Engineering, College of Engineering in WadiAlddwasir, Prince Sattam Bin Abdulaziz University, Al-Kharj, Saudi Arabia; Alnukhba University College, Baghdad, Iraq; Department of oil and Gas Refining Engineering, Al Hikma University College, Baghdad, Iraq; School of Chemical Engineering, University of Birmingham, Birmingham, United Kingdom; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Iraq; Department of Oil and Gas Engineering, Basrah University for Oil and Gas, Basrah, Iraq; Department of Physics, Sciences Faculty, Laboratory Physic-Chemistry, Research of Surfaces and Interfaces, Skikda University, 20 August, Skikda, 1955, Algeria; RD Engineering College, Ghaziabad, UP, India; Department of Mechanical Engineering, Faculty of Engineering and Technology, Nile Valley University, Atbara, Sudan
The enhancement of solar chimney technology and application in Iraq and Saudi Arabia for the generation of sustainable energy is a requirement of increasing energy and environment crisis. The findings reveal that solar chimneys may greatly enhance surrounding temperatures and air circulation. Certain models, such as the 36 m2 collecting area and 6 m chimney height investigated in Tikrit, Iraq, showed good execution under local climate conditions. The study comes to the conclusion that venting contaminated areas, including solar chimney systems, can augment urban air quality in addition to delivering clean electricity technology. In order to augment efficiency and implementation pragmatism in a variety of geographical settings, recommendations consist of extending the number of thermal collectors, looking into hybrid systems that amalgamate solar chimneys with other renewable technologies, and doing more studies into improving the configurations of design. © 2025 Informa UK Limited, trading as Taylor & Francis Group.
الكلمات المفتاحية: Iraq renewable energy Saudi Arabia Solar chimney Solar energy
Abdulkadhim A.; Hamza N.H.; Hamzah H.K.; Abed A.M.; Ali F.H.
International Communications in Heat and Mass Transfer , Vol. 164
7 استشهاد Article English ISSN: 07351933
Mechanical Engineering Department, University Al-Qadisiyah, Al-Qadisiyah, 58001, Iraq; Mechanical Engineering Department, University of Babylon, Babylon Province, Iraq; Mechanical Power Techniques Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Babylon Province, Hillah, 51001, Iraq
A CFD interpretation is presented to analyze the double-diffusive natural convection along with the entropy generation inside inclined E-shaped enclosure with wavy wall under the influence of magnetic field. The existence of inner heated circular body had been included in this study that it solved numerically using finite element formulation. The enclosure wavy wall is kept at the same hot temperature of the inner heated body while the vertical wall of the enclosure is kept at cold temperature and the rest of the horizontal walls are thermally insulated. The enclosure had been filled by electrically conducting fluid with Prandtl number of Pr=0.024. Additionally, Hartmann number and Darcy number kept constant at as Ha=20Da=10−5. The studied parameters are the inclination of the magnetic field that varied as γ=0°15°30°45°60°75°and90°. Additionally, the enclosure its self is orientated as λ=0°45°90°135°180°225°270°315°and360°. The Rayleigh number are varied as Ra=103−106. The buoyancy ratio had been varied as N=0246810and Lewis number is varied as Le=1−10. Additionally, the inner circular body is varied −0.3≤δ≤+0.3. The results show that applied the magnetic field in the vertical direction γ=90° helped in enhancing the heat transfer and lower entropy generation while at γ=0° helped in better mass transfer. Additionally, in spite inclining the enclosure at λ=270° contributed in lower entropy generation but it led to lower heat and mass transfer rate. At zero buoyancy ratio number N=0, there is no impact of Lewis number on heat transfer rate. However, when buoyancy ratio number into N=10, it is noted that increasing Lewis number from Le=1 into Le=10, leads to decreases Nu by 52.17 %. Similar behavior is noted for the entropy generation while Sherwood number increases with the increasing of Lewis number regardless the value of buoyancy ratio number. Lastly, the position of the inner body and its role in heat and mass transfer is highly impacted by the Rayleigh number. It is obtained that at low Ra, the best position for heat transfer is at δ=−0.2 while at high Ra, the best position is at δ=−0.3. Additionally, at high Ra, the entropy generation decreases as the inner body moved in the positive direction. © 2025
الكلمات المفتاحية: Double-diffusive E-shaped enclosure Entropy Lewis number MHD Porous media
Fang W.; Farouk N.; Abed A.M.; Khalil S.A.; Abdullaev S.; Alhomayani F.M.; Khan M.N.; Bayhan Z.; Knani S.; Afzal A.R.
Energy , Vol. 327
6 استشهاد Article English ISSN: 03605442
Weifang University of Science and Technology, Weifang, 262700, China; Mechanical Engineering Department, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Mechanical Engineering Department, Faculty of Engineering, Red Sea University, Port Sudan, Sudan; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Chemistry, Alwajh College, University of Tabuk, Tabuk, Saudi Arabia; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Scientific and Innovation Department, Tashkent State Pedagogical University Named After Nizami, Tashkent, Uzbekistan; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Department of Mechanical and Industrial Engineering, College of Engineering, Majmaah University, Al-Majmaah, 11952, Saudi Arabia; Department of Physics, College of Sciences, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia; Center for Scientific Research and Entrepreneurship, Northern Border University, Arar, 73213, Saudi Arabia; Department of Industrial Engineering, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia
The optimization of biomass to energy systems using metaheuristic particle swarm optimization (PSO) technique holds great promise for advancing the efficiency, sustainability, and competitiveness of bioenergy production. The importance of this research field lies in its potential to address key challenges in biomass utilization and contribute to achieving global energy and environmental goals. This study employs the metaheuristic PSO technique to optimize banana peel-based combined heat and power systems. Various regression models are developed for response variables and their accuracy is evaluated. R-squared values exceeding 93 % strongly suggests that the independent variables account for a significant portion of the variability in the dependent variables, indicating robust predictive capabilities and high reliability in the models. Different Pareto-front solutions are derived to reach near-optimal conditions to achieve maximum exergy and electrical efficiencies and minimize emission levels (the ratio of the carbon dioxide emission to the outputs of the system). The optimum outcome measures include an electrical efficiency of 27.29 %, exergy efficiency of 19.56 %, and emissions level of 1052 kg/MW. By addressing these research areas, it is possible to advance the development and deployment of efficient, cost-effective, and sustainable biomass-based energy systems to meet the growing global demand for renewable energy by focusing on metaheuristic optimization technique. © 2025 Elsevier Ltd
الكلمات المفتاحية: Banana peel Biomass to energy Environmental protection Metaheuristic Multi-objective optimization
Aldien M.S.; Basem A.; Abed A.M.; Al-lehaibi M.; AL-bonsrulah H.A.Z.; Egami R.H.
Results in Engineering , Vol. 26
6 استشهاد Article Open Access English ISSN: 25901230
Department of Mathematics, Turabah University College, Taif University, P.O. Box 11099, Taif, 21944, Saudi Arabia; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Mechanical power Techniques Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Mechanical Engineering Department, College of Engineering and Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah, 24382, Saudi Arabia; Department of Medical Instrumentation Engineering Techniques, Al Safwa University College, Karbala, 56001, Iraq; Department of Mathematics, College of Science and Humanities, Prince Sattam bin Abdulaziz University, Al-kHARJ, 11942, Saudi Arabia
This study investigates the productivity of a solar panel system subjected to a magnetic field, utilizing cooling tubes and confined jet streams. Combination of PVT (Photovoltaic-thermal) and TEG (Thermoelectric generator) has been utilized. A ferrofluid composed of iron oxide (Fe3O4) nanoparticles dispersed in water was employed to enhance heat transfer within the cooling sections. Key factors analyzed include dust density (ω), jet inlet velocity (Vjet), cooling tube velocity (Vtube), and the Hartmann number (Ha). The results indicate that an increase in dust density (ω) reduces thermal efficiency (ηth) by approximately 8.8 %, underscoring the importance of controlling dust accumulation to maintain optimal performance. In contrast, the application of a magnetic field, quantified by Ha, improves cooling uniformity, leading to a 17.8 % enhancement in thermal efficiency. Higher Ha values specifically contribute to a 1.19 % increase in ηth. Moreover, raising the cooling tube velocity (Vtube) enhances thermal field uniformity by 32 %, further boosting overall system performance. These findings demonstrate the effectiveness of integrating magnetic forces and nanofluids in advancing solar panel technology, offering pathways for more efficient and sustainable energy solutions. © 2025
الكلمات المفتاحية: Confined jet Dust deposition Ferrofluid Magnetic force Photovoltaic-thermal
Xu Y.; Li H.; Abed A.M.; Alghassab M.A.; Shaban M.; Abdullaev S.; Mahariq I.; Abouzied A.S.; Elmasry Y.; Alrawashdeh A.I.
Renewable Energy , Vol. 241
6 استشهاد Article English ISSN: 09601481
School of Chemistry and Pharmaceutical Engineering, Huanghuai University, Zhumadian, 463000, China; Department of Electronic and Information Engineering, Bozhou University, Bozhou, 236800, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Electrical Engineering Department, College of Engineering, Shaqra University, Riyadh, 11911, Saudi Arabia; Department of Physics, Faculty of Science, Islamic University of Madinah, Madinah, 42351, Saudi Arabia; Senior Researcher, Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Senior Researcher, Department of Science and Innovation, Tashkent State Pedagogical University Named After Nizami, Tashkent, Uzbekistan; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Applied Science Research Center, Applied Science Private University, Amman, Jordan; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Hail, Hail, 81442, Saudi Arabia; Department of Mathematics - College of Science - King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Department of General Subjects, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Chemistry and Chemical Technology, College of Science, Tafila Technical University, Tafila, 66110, Jordan
This research aims to analyze and enhance a tri-generation energy system that utilizes geothermal energy for producing power from heat extracted from the geothermal source, along with freshwater and heating. To achieve this, the study employed the central composite design method from response surface methodology. The system comprises a double-flash geothermal configuration, a desalination component, and a transcritical carbon dioxide Rankine cycle. A Pareto analysis was performed to pinpoint and rank the most critical factors affecting the system's performance, while residual analysis assessed the precision of the central composite design approach. The analysis of variance offered a numerical evaluation of how processing parameters influenced power generation, heating output, freshwater yield, and overall system efficiency. In the end, the central composite design method facilitated the optimization of system performance. Findings from the Pareto analysis indicated that the geothermal source temperature had the greatest influence on power production, hot water output, and overall efficiency, while the mass flow rate of the geothermal source primarily affected freshwater generation. Under optimal operating conditions, the system was able to generate a power output of 1191.8 kW, produce 64.89 kg/s of hot water, generate 4.94 kg/s of freshwater, and achieve an efficiency of 59.96 %. This study illustrates the significance of transforming heat extracted from the geothermal source into valuable energy and emphasizes the advantages of integrated systems for converting heat extracted from the geothermal source into power, heating, and freshwater. © 2024 Elsevier Ltd
الكلمات المفتاحية: Central composite design Desalination Freshwater Geothermal Renewable energy
Abouzied A.S.; Guo X.; Abed A.M.; Alghassab M.A.; Alhomayani F.M.; Khan B.; Elmasry Y.; Almadhor A.; Alkhalaf S.; Alrawashdeh A.I.
Case Studies in Thermal Engineering , Vol. 65
5 استشهاد Article Open Access English ISSN: 2214157X
Department of Pharmaceutical Chemistry, College of Pharmacy, University of Hail, Hail, 81442, Saudi Arabia; Terazor (Beijing) Technology Co., Ltd., Jinguan North Second Street, Shunyi District, Beijing, 101316, Australia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Electrical Engineering Department, College of Engineering, Shaqra University, Riyadh, 11911, Saudi Arabia; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Department of Electrical and Computer Engineering, Hawassa University, Hawassa, Ethiopia; Center for Renewable Energy and Microgrids, Huanjiang Laboratory, Zhejiang University, Zhejiang, 311816, Australia; Department of Mathematics, College of Science, King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Department of Computer Engineering and Networks, College of Computer and Information Sciences, Jouf University, Saudi Arabia; Department of Computer Engineering, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of General Subjects, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Chemistry and Chemical Technology, College of Science, Tafila Technical University, Tafila, 66110, Jordan
This study delineates the development of a solar energy system that leverages concentrated solar power (CSP) technology to supply both electricity and potable water for residential applications. The proposed thermal architecture uniquely integrates heliostat solar fields with a dual-loop power generation cycle, augmented by a seawater desalination system that employs reverse osmosis (RO) membranes. To bolster electricity production, a thermoelectric generator (TEG) has been incorporated into the system's design framework. A comprehensive analysis of the system has been performed, encompassing thermodynamic and economic evaluations. Furthermore, a parametric analysis has been executed to investigate the effects of critical parameters on the system's operational efficiency. The efficacy of the system was rigorously assessed through a case study that examined its capabilities for daily production outputs. This research, grounded in the analytical projections from Saudi Arabia and the favorable environmental conditions characteristic of the region, explores the operational performance of the system within this specific geographical context. The primary objective of this inquiry is to determine the ideal operational parameters by employing multi-criteria optimization methods tailored to the established system. Variations in compressor pressure ratios were found to significantly affect the performance of the Brayton cycle and the exergetic efficiency of the system, with optimal economic efficiency being realized at a specific pressure ratio. Furthermore, increasing the inlet temperatures in the organic Rankine cycle has been shown to improve system efficiency up to a certain limit, beyond which potential reliability issues could arise. The case study demonstrated that electricity generation peaks during the summer months, particularly in June, aligning with a high volume of freshwater production totaling 264,530 m³. The optimization efforts achieved an exergetic efficiency of 17.69 % and an overall cost of $359.58 per hour. © 2024 The Authors
الكلمات المفتاحية: Energy system Financial considerations GA optimization Solar energy Themal system analysis Thermal architecture
Hussein A.K.; Togun H.; Rashid F.L.; Basem A.; Abed A.M.; Al-Obaidi M.A.; Abdulrazzaq T.; Dhabab J.M.; Attia M.E.H.; Ali B.; Rout S.K.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , Vol. 47 (4)
5 استشهاد Review English ISSN: 16785878
Mechanical Engineering Department, College of Engineering, University of Babylon, Babylon City, Hilla, Iraq; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Technical Institute of Baquba, Middle Technical University, Diyala, Baquba, 32001, Iraq; Technical Instructor Training Institute, Middle Technical University, Baghdad, 10074, Iraq; Department of Chemical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Alnukhba University College, Baghdad, Iraq; Physics Department, Faculty of Exact Sciences, University of El Oued, El Oued, 3900, Algeria; School of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen, 518055, China; Department of Mechanical Engineering, C.V. Raman Global University, Bhubaneswar, 752054, India
This study is an in-depth look at previous investigations on heat transfer analysis in trapezoidal enclosures. It intends to give a full picture of flow and heat transfer performance in these types of cavities in two different configurations: one filled with nanofluids and the other with a mix of nanofluids. Thermophoresis, magnetic forces, and the buoyancy effect are examples of the factors that are considered in this investigation of heat transport in cavities. In addition, only single-phase flows are included in this study, which emphasizes on flow and heat transfer processes. The review has covered 35 published research between 2011 and 2024, with detailed discussion of heat transfer analysis in lid-driven trapezoidal enclosures. The most significant conclusions of this research are that, for each type of fluid, an inclination of the magnetic field considering the horizontal axis results in the maximum heat and mass transfer in addition to the highest average total entropy production. It is also ascertained that the efficiency of the magnetic field application can be improved when the coefficients for heat absorption and heat production are higher. Finally, larger nanoparticle sizes and a larger radius for the revolving cylinder would improve flow circulation in the area immediately around the cylinder. The results of this research have wide-ranging implications, for example solar thermal technology, electronic cooling and energy storage and nuclear reactors. © The Author(s), under exclusive licence to The Brazilian Society of Mechanical Sciences and Engineering 2025.
الكلمات المفتاحية: Hybrid nanofluid Mixed convection Nanofluid Review Trapezoidal enclosures
Wang H.; Abed A.M.; Patel P.; Patil N.; Ayed H.; Mouldi A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 65
5 استشهاد Article Open Access English ISSN: 2214157X
School of Mechanical Engineering, Xijing University, Shaanxi, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, Faculty of Engineering & Technology Marwadi University, Gujarat, Rajkot, India; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Karnataka, Bangalore, India; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
This study investigated the impact of innovative clockwise and counter-clockwise twisted triangle-shaped turbulators on thermal-fractional parameters within a constant surface temperature pipe. One of the key features of this turbulator is its unique geometry, which combines the characteristics of twisted tape and louvered strip turbulators. This design allows for the simultaneous generation of radial and swirling flows within the pipe. The effects of various parameters such as twist angles between 60 and 270°, pitch distances from 0 to 10 mm, and different twisting direction sequences were studied. The findings indicate that increasing the twist angle up to 270° simultaneously enhances the Nusselt number and friction factor. However, while the thermal enhancement factor (TEF) increases with a twist angle up to 120°, it begins to decline at angles greater than 120°. Additionally, the results show that increasing the pitch distance up to 5 mm yields improvements in both heat transfer and TEF; however, beyond this distance, both parameters start to decrease. Moreover, the use of this turbulator can increase heat transfer by as much as 4.45 times compared to a smooth pipe. The maximum TEF achieved is 2.66, which occurs with a configuration of three clockwise and three counterclockwise triangle-shaped turbulators at a twist angle of 120° and a pitch distance of 5 mm. © 2024
الكلمات المفتاحية: Clockwise and counterclockwise configuration Heat transfer Pressure drop Twisted triangle shape turbulator
Rameshbabu R.; Siaw Paw J.K.; Ajaijawahar K.; Arunachalam A.; Jadoun S.; Viswanathan M.R.; Yaw C.T.; Kiong T.S.; Tong C.W.; Abed A.M.; Majdi H.S.; Pasupuleti J.
International Journal of Hydrogen Energy , Vol. 139, pp. 935-945
5 استشهاد Article English ISSN: 03603199
Institute of Sustainable Energy, Universiti Tenaga Nasional (The Energy University), Jalan Ikram-Uniten, Selangor, Kajang, 43000, Malaysia; Hydrogen Storage Materials and Nanosensors Laboratory, Department of Physics and Nanotechnology, SRM Institute of Science and Technology Tamil Nadu, India; Departamento de Electricidad, Facultad de Ingeniería, Universidad Tecnológica Metropolitana (UTEM), Av. José Pedro Alessandri 1242, Santiago, Ñuñoa, 7800002, Chile; Departamento de Química, Facultad de Ciencias, Universidad de Tarapacá, Avda. General Velásquez, Arica, 1775, Chile; Facultad de Ingeniería y Ciencias, Universidad Adolfo Ibáñez, Peñalolén, Santiago, Chile; Centre for Energy Sciences, Department of Mechanical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Babylon, 51001, Iraq
Ultrasound-assisted wet-impregnation approach and cation-exchange hydrothermal method are employed effectively to develop the ternary nanocomposites NiS/ZnS/g-C3N4 (NZ-CN) with promising photocatalytic hydrogen (H2) generation activity. Several analytical techniques are utilized to characterize the as-synthesized NiS/ZnS/g-C3N4 nanocomposites to study their physical and chemical characteristics. The H2 production activity of the synthesized photocatalysts was tested using a 250 W halogen lamp with Na2S (0.25 M) and Na2SO3 (0.35 M) as sacrificial reagents. The optimized NZ-CN7.5% (3% NiS/ZnS/7.5% g-C3N4) catalyst displayed an exceptional H₂ generation rate of 8624 μmol h⁻1 g⁻1, exceeding both, pristine g-C3N4 (by 22.1 times) and 3% NiS/ZnS (by 3 times). This represents the highest reported rate of H₂ evolution for a graphitic carbon nitride (g-C3N4) based ternary nanocomposite under simulated solar radiation. By reusing the used NZ-CN7.5% (3% NiS/ZnS/7.5% g-C3N4) photocatalyst in four consecutive runs, the stability of the catalyst was investigated, and their individual activity in the H2 production activity was assessed. This study provides valuable insights for designing efficient noble metal-free g–C3N4–based photocatalysts, which can significantly contribute to the transition to solar-driven hydrogen generation. Further, we proposed a plausible mechanism for the photocatalytic H2 generation process over the NiS/ZnS/g-C3N4 photocatalyst. © 2024 Hydrogen Energy Publications LLC
الكلمات المفتاحية: Active sites Carrier transfer Co-catalysis Energy H<sub>2</sub> production NiS/ZnS/g-C<sub>3</sub>N<sub>4</sub>
Mouziraji H.R.; Tiji M.E.; Abed A.M.; Tiji A.E.; Mohammed H.I.; Mahdi J.M.; Talebizadehsardari P.; Keshmiri A.
Heat Transfer Engineering , Vol. 46 (12), pp. 1024-1045
4 استشهاد Article Open Access English ISSN: 01457632
Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran; Department of Mechanical Engineering, Qom University of Technology, Qom, Iran; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, Iraq; Department of Mechanical Engineering, Semnan University, Semnan, Iran; Department of Physics, CollegCe of Education, University of Garmian, Kalar, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, Iraq; Power Electronics, Machines and Control (PEMC) Group, University of Nottingham, Nottingham, United Kingdom; School of Engineering, University of Manchester, Manchester, United Kingdom
This article proposes a new staggered fin configuration in a vertical triple-tube heat storage unit to accelerate the discharging rate of phase change material (PCM) solidification. The proposed design consists of a staggered pattern of distribution fins, i.e. with fins on the outer tube oriented upwards and those on the inner tube oriented downwards, maximizes the heat removal potential through exposing fins to the higher flow rate tube. The solidification performance is assessed by modeling the transient heat transfer and fluid flow by using an enthalpy-porosity technique. The effects of fin dimensions, inlet temperature, and Reynolds number are analyzed to obtain the optimal configuration. Compared to the baseline case without fins, the optimized staggered arrangement reduces solidification time by 52% and increases the discharge rate by 30%. The staggered fins also outperform inline fins, cutting solidification time by 46% and boosting discharge rate by 16%. Furthermore, temperature contours reveal more uniform PCM cooling for the staggered design. Adding a fin at the top further improves performance by overcoming weak natural convection in that region. This study demonstrates that the proposed staggered fin arrangement significantly enhances the PCM discharge characteristics, offering major advantages over conventional inline or finless configurations. © 2024 The Author(s). Published with license by Taylor & Francis Group, LLC.
Hu J.; Abed A.M.; Talib Z.M.; Alghassab M.A.; Abdullaev S.; Ghandour R.; Hamlaoui O.; Alhomayani F.M.; Dutta A.K.; Jastaneyah Z.
Energy , Vol. 315
4 استشهاد Article English ISSN: 03605442
School of Economics and Management, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Management and Science University, Selangor, Shah Alam, Malaysia; Electrical Engineering Department, College of Engineering, Shaqra University, Riyadh, 11911, Saudi Arabia; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Scientific and Innovation Department, Tashkent State Pedagogical University Named After Nizami, Tashkent, Uzbekistan; College of Engineering and Technology, American University of the Middle East, Egaila, 54200, Kuwait; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Department of Computer Science and Information Systems, College of Applied Sciences, AlMaarefa University, Ad Diriyah, Riyadh, 13713, Saudi Arabia; Department of Mechanical Engineering, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia
This study delineates the development and evaluation of a power generation cycle characterized by the absence of carbon dioxide emissions, achieved through the direct combustion of oxygen and natural gas, a system commonly known as the Graz cycle. The analysis incorporates both thermodynamic and economic dimensions. In this system, hydrogen (H2) was initially produced from two separate sources to enable the conversion of carbon dioxide (CO2), sourced from the Graz cycle, into methane. The predominant method for hydrogen production is through the biomass gasification system, complemented by the use of hydrogen separation membranes. The solid oxide electrolyzer cell serves as the secondary source, wherein the necessary electrical energy is supplied by photovoltaic collectors. This research employs a robust methodological framework to undertake a comprehensive analysis of economic variables, with the objective of providing an accurate depiction of empirical conditions in the real world. This study conducts a comprehensive analysis of all relevant costs within the specified framework. A series of ANN-centered optimization analyses was performed to ascertain conditions that concurrently optimize the economic and thermodynamic dimensions of the system. © 2024 Elsevier Ltd
الكلمات المفتاحية: Biomass-based system Hydrogen production Polygeneration system Sustainable/clean production Waste-to-energy Zero-emission
Al Arni S.; Sultan Aljibori H.S.; Abed A.M.; Mohammed H.I.; Mahdi J.M.; Togun H.; Sadeq A.M.; Ghalambaz M.; Ben Khedher N.
Case Studies in Thermal Engineering , Vol. 70
4 استشهاد Article Open Access English ISSN: 2214157X
Department of Chemical Engineering, College of Engineering, University of ha'Il, P.Box 2440, Ha'il City, Saudi Arabia; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, Iraq; Department of Physics, College of Education, University of Garmian, Kurdistan, Kalar, 46021, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, 10017, Iraq; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Mechanical and Industrial Engineering Department, College of Engineering, Qatar University, Doha, Qatar; Department of Mathematical Sciences, Saveetha School of Engineering, SIMATS, Chennai, India; Department of Mechanical Engineering, College of Engineering, University of ha'Il, P.Box 2440, Ha'il City, Saudi Arabia
This study explores efficient schemes to substantially accelerate the discharge rates of phase change materials contained in a zigzag-shaped triplex-tube heat exchanger. It comprehensively investigates how zigzag geometry, heat transfer fluid flow parameters, and nanoparticle additives affect PCM discharge characteristics. Introducing a high 67.5° zigzag angle produced a 43.8 W solidification rate, which improves discharge rate by 10.6 % over straight tubes by increasing heat transfer area and promoting vortex formation. Extending the zigzag length to 15 mm further boosted the rate by 61.5 %-157.4 W by expanding the heat exchange surface area. Increasing the Reynolds number of the heat transfer fluid from 250 to 500 enhanced the solidification rate by 26 %-157.4 W by augmenting convective heat transfer. Lowering the heat transfer fluid inlet temperature from 20 °C to 10 °C dramatically reduced solidification time by 75 %, from 1956 s to 774 s by accelerating phase transition kinetics. Furthermore, adding 4 % aluminum oxide nanoparticles improved the rate by 16 %-182 W by enhancing thermal conductivity. Combining optimal parameters (67.5° zigzag angle, 15 mm length, 500 Reynolds number, 10 °C inlet temperature, and 4 % aluminum oxide nanoparticles) achieved a remarkable 300 % increase in discharge rate, from 39.6 W to 198.4 W compared to baseline straight tube configurations with pure phase change material. © 2025 The Authors.
الكلمات المفتاحية: Energy discharge Nanoparticles Phase change materials Zigzag orientation
Mei B.; Abed A.M.; Patel P.; Kedia A.; Ayed H.; Mouldi A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 66
4 استشهاد Article Open Access English ISSN: 2214157X
College of Construction Engineering, Yunnan Agricultural University, Yunnan, Kunming, 650000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, Faculty of Engineering & Technology Marwadi University, Gujarat, Rajkot, 360003, India; NIMS School of Mechanical and Aerospace Engineering, NIMS University Rajasthan, Jaipur, India; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Higher Institute of Transport and Logistics of Sousse, University of Sousse, Sousse, 4023, Tunisia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Mathematics, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Tamil Nadu, Chennai, 602105, India; Applied Science Research Center, Applied Science Private University, Amman, Jordan; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
This study introduces a novel grooved cone turbulator (GCT) designed to enhance the thermal efficiency of a heated tube. The performance of the GCT-equipped tube was compared to that of a simple cone turbulator (SCT) and a plain tube. To investigate the impact of the GCT's geometric characteristics on hydrothermal parameters, tests were conducted on varying groove diameters (2.5–10 mm), twist angles (0–270°), and pitch lengths (40–70 mm). The results demonstrate that heat transfer is directly correlated with both groove diameter and twist angle, while it is inversely correlated with pitch length. Notably, the use of the GCT increased the Nusselt number and friction factor by as much as 762 % compared to the plain tube and by 221 % compared to the SCT-equipped tube. Among the three configurations tested—plain tube, SCT-equipped tube, and GCT-equipped tube—the GCT achieved the highest thermal enhancement factor (TEF) of 3.42. This optimal TEF of 3.42 was attained with a GCT featuring a twist angle of 90°, a groove diameter of 10 mm, and a pitch length of 5 cm. © 2024
الكلمات المفتاحية: Double-pipe heat exchanger Grooved cone turbulator (GCT) Heat transfer Pressure drop
Hassaballa A.A.; Basem A.; Abed A.M.; Al-Lehaibi M.; Al-Bonsrulah H.A.Z.; Mohamed S.M.Y.
Case Studies in Thermal Engineering , Vol. 72
4 استشهاد Article Open Access English ISSN: 2214157X
Center for Scientific Research and Entrepreneurship, Northern Border University, Arar, 73213, Saudi Arabia; Department of Mathematics, Faculty of Science, Northern Border University, Arar, 73213, Saudi Arabia; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Mechanical Power Techniques Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Mechanical Engineering Department, College of Engineering and Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah, 24382, Saudi Arabia; Department of Medical Instrumentation Engineering Techniques, Al Safwa University College, Karbala, 56001, Iraq; Department of Mathematics, College of Science and Humanities, Prince Sattam Bin Abdul-Aziz University, Al-Kharj, 11942, Saudi Arabia
The efficiency of photovoltaic (PV) panels is significantly affected by overheating and dust accumulation, reducing both electrical output and longevity. To solve this issue, current article suggests an advanced cooling approach using ferrofluid in an elliptical duct, enhanced by the Lorentz force. Additionally, a thermoelectric generator (TEG) is integrated to optimize energy recovery from the thermal gradient. A numerical simulation is conducted to analyze the effects of ferrofluid cooling, magnetic field intensity (Hartmann number, Ha), and inlet velocity (Vin) on system performance. The results reveal that increasing Ha improves isotherm uniformity by 8.35 % at Vin = 0.16 m/s, while simultaneously enhancing electrical performance (ηe) by 1.41 % and thermal performance (ηth) by 6.29 %. Further, increasing Vin enhances uniformity by 16.58 % and 23 % at Ha = 0 and Ha = 66, respectively, leading to a 7.79 % rise in ηth and a 1.52 % increase in ηe at the lowest Ha. These findings demonstrate that combining ferrofluid cooling and the Lorentz force significantly improves PV performance, providing a promising pathway for developing high-efficiency and sustainable solar energy systems. © 2025 The Authors.
الكلمات المفتاحية: Electrical power Elliptic duct Lorentz force Nanofluid Solar system TEG-PVT Thermal efficiency
Abed A.M.; Kanabar B.; Ramachandran T.; Shankhyan A.; Chohan J.S.; Karthikeyan A.; Gupta D.; Salah B.; Saleem W.
Case Studies in Thermal Engineering , Vol. 71
4 استشهاد Article Open Access English ISSN: 2214157X
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hillah, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Marwadi University Research Center, Department of Mechanical Engineering, Faculty of Engineering & Technology, Marwadi University, Gujarat, Rajkot, 360003, India; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to Be University), Karnataka, Bangalore, India; Centre for Research Impact & Outcome, Chitkara University Institute of Engineering and Technology, Chitkara University, Punjab, Rajpura, 140401, India; School of Mechanical Engineering, Rayat Bahra University, Mohali, India; Faculty of Engineering, Sohar University, Sohar, Oman; Department of Mechanical Engineering, Sathyabama Institute of Science and Technology, Tamil Nadu, Chennai, India; Department of Mechanical Engineering, Graphic Era Hill University, Uttarakhand, Dehradun, 248002, India; Department of Mechanical Engineering, Graphic Era Deemed to Be University, Uttarakhand, Dehradun, 248002, India; Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, 12372, Saudi Arabia; Department of Mechanical and Manufacturing Engineering, Institute of Technology, Sligo, F91 YW50, Ireland
The increasing use of heated pipes and heat exchangers has created a pressing need to enhance thermal efficiency. This research introduces a novel turbulator design known as the conical twisted strip turbulator. The turbulator design resembles a cone and is composed of several twisted strip tentacles. This unique configuration is expected to generate strong rotational and radial flow patterns, leading to enhanced heat transfer. A numerical analysis was conducted using the RNG k-epsilon model to investigate various geometric parameters of the turbulator. The study examined the twisted angle, which varied from 60 to 270°, the number of twisted strip tentacles, which ranged from 4 to 10, and the width of the twisted strip tentacles, which spanned from 1 to 4 mm. This comprehensive approach allows for a thorough understanding of how these parameters influence the hydrothermal characteristics. The findings reveal that incorporating the conical twisted strip turbulator can significantly elevate heat transfer and pressure drop - by factors of up to 3.31 and 5.45, respectively - when compared to a plain tube design. The optimal performance enhancement criteria of 1.93 was achieved with a turbulator featuring a twisted angle of 180°, six twisted strip tentacles, and a strip width of 4 mm. Moreover, the results showed that heat transfer and pressure drop are directly related to the twisted angle, the number of twisted strip tentacles, and the width of the twisted strip. However, the performance enhancement criteria may improve or worsen as these parameters increase. © 2025 The Authors.
الكلمات المفتاحية: Conical twisted strip turbulator Heat transfer Heated tube Pressure drop Thermal efficiency
Wang J.; Zhu X.; Abed A.M.; Kanabar B.; Hassan H.; Kedia A.; Salah B.; Mahariq I.
Journal of Building Engineering , Vol. 101
4 استشهاد Article Open Access English ISSN: 23527102
School of Civil Engineering and Architecture, Chongqing Institute of Engineering, Chongqing, 400056, China; School of Architecture and Engineering, Shanghai Zhongqiao Vocational and Technical University, Shanghai, 201514, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al -Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Marwadi University Research Center, Department of Mechanical Engineering, Faculty of Engineering & Technology, Marwadi University, Gujarat, Rajkot, 360003, India; Management and Science University, Selangor, Shah Alam, Malaysia; NIMS School of Mechanical and Aerospace Engineering, NIMS University Rajasthan, Jaipur, India; Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, 12372, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; University College, Korea University, Seoul, 02481, South Korea
The rising energy demand of the building sector has led to a critical need for innovative solutions to curb its 37 % share of global CO₂ emissions in 2020. This study introduces a novel hybrid energy system integrating solar photovoltaic-thermal (PVT) panels with a biofuel-driven boiler, designed to meet residential heating, cooling, and electricity needs. Dynamic simulations were conducted using TRNSYS to evaluate the system's real-world performance across varying climatic conditions. Optimization using the greywolf algorithm achieved a balance among three competing objectives: thermodynamic efficiency, environmental sustainability, and economic viability. The system delivered a thermal efficiency of 28.5 %, a levelized energy cost of 0.163 $/kWh, and a CO₂ emission index of 121 kg/MWh, reflecting significant improvements of 13.5 %, 23.1 %, and 15.4 %, respectively, over the baseline design. Unlike prior studies, this work uniquely combines dynamic transient modeling with multi-objective optimization for a solar-biofuel energy system, offering actionable insights into sustainable energy integration for the building sector. These findings underscore the system's potential to enhance energy performance while reducing environmental and economic costs. © 2025
الكلمات المفتاحية: Biofuel Economic and environmental analysis Renewable building energy plant Solar PVT Triple-criteria optimization
Abed A.M.; Shawabkeh A.; Salah B.; Jhala R.; Ramachandran T.; Shankhyan A.; Mann V.S.; Singh R.; Thatoi D.N.; Saleem W.
Thermal Science and Engineering Progress , Vol. 63
4 استشهاد Article English ISSN: 24519049
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hillah, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; College of Engineering and Technology, American University of the Middle East, Kuwait; Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia; Marwadi University Research Center, Department of Mechanical Engineering, Faculty of Engineering & Technology, Marwadi University, Gujarat, Rajkot, 360003, India; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Karnataka, Bangalore, India; Vardhaman College of Engineering Hyderabad, Telangana, India; Department of Mechanical Engineering, Chandigarh Engineering College, Chandigarh Group of Colleges-Jhanjeri, Punjab, Mohali, 140307, India; Department of Mechanical & Aerospace Engineering, NIMS Institute of Engineering & Technology, NIMS University Rajasthan, Jaipur, India; Department of Mechanical Engineering, Siksha ’O’ Anusandhan (Deemed to be University), Odisha, Bhubaneswar, 751030, India; Department of Mechanical and Manufacturing Engineering, Institute of Technology, Sligo, F91 YW50, Iceland
This study addresses the urgent need for sustainable energy solutions by proposing an innovative multi-generation system that integrates the Cu–Cl cycle, biogas steam reforming (BSR), reverse osmosis (RO) desalination, and gas turbine (GT) technologies. The system simultaneously produces hydrogen, freshwater, and electricity. A comprehensive assessment based on the 5E framework—comprising energetic, exergetic, exergo-economic, environmental, and exergo-environmental analyses—has been conducted. Sensitivity analyses were performed to evaluate the influence of variations in key input parameters on overall system efficiency. The results highlight the system's potential, delivering 50,952 kW of net power, 0.52 kg/s of hydrogen, and 0.96 kg/s of freshwater. An increase in methane molar flow rate was found to enhance the system's techno-economic and environmental performance. In conclusion, the proposed multi-generation system offers a promising and sustainable approach for efficient production of hydrogen, freshwater, and electricity. Moreover, a three-objective optimization further improved the energy and exergy efficiencies, while reducing the specific unit cost of product (SUCP) to 23.29 %, 17.44 %, and 220.57 $/GJ, respectively. © 2025
الكلمات المفتاحية: Biogas Cu-Cl cycle Exergoeconomic Hydrogen production RO desalination
Abed A.M.; Alhuyi-Nazari M.; Ashirova A.; Kutliev U.; Ahmadi M.H.; Ongar B.; Bibinur S.; Atamurotov F.; Gharib N.
Journal of Thermal Analysis and Calorimetry , Vol. 150 (20), pp. 15883-15901
4 استشهاد Article English ISSN: 13886150
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Engineering School, Department of Mechanical Engineering, Central Asian University, Tashkent, Uzbekistan; Mamun University, Bolkhovuz Street 2, Khiva, 220900, Uzbekistan; Urgench State University, Kh. Alimdjan Str. 14, Urgench, 220100, Uzbekistan; Faculty of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran; Department of Power Engineering, Satbayev University, 22a Satpaev Str., Almaty, 050013, Kazakhstan; Kimyo International University in Tashkent, Shota Rustaveli Str. 156, Tashkent, 100121, Uzbekistan; University of Tashkent for Applied Sciences, Str. Gavhar 1, Tashkent, 100149, Uzbekistan; Tashkent State Technical University, Tashkent, 100095, Uzbekistan; College of Engineering and Technology, American University of the Middle East, Egaila, 54200, Kuwait
Microchannel heat sinks (MCHSs) are effective and compact thermal management devices that are broadly developed in recent years. Performance of these equipment is impacted by a variety of the factors that have been investigated and evaluated by the scholars and researches. Use of coolant with improved thermal properties can elevate heat transfer rate and consequently the thermal performance. One of the attractive techniques for improvement of convective heat transfer is use of nanofluids, with higher thermal conductivity in comparison with the conventional heat transfer fluid, as the coolant. The aim of the current article is to comprehensively review the applications of the hybrid nanofluids, containing more than single nanomaterial in the base fluid, in the MCHSs. Findings of the research works on the use of these nanofluids in MCHSs have revealed considerable potential for elevation in heat transfer rate. Several factors impact the modification of heat transfer in MCHSs with hybrid nanofluids including the characteristics of the coolant, configuration of the system and operating conditions. As well as heat transfer, other factors such as the pressure drop and entropy generation would be impacted due to the existence of the hybrid nanomaterials in the working fluid. Some recommendations are presented in this article for the forthcoming researches in order to further enhance the heat transfer and modify the characteristics of these systems. © Akadémiai Kiadó Zrt 2025.
الكلمات المفتاحية: Hybrid nanofluid Microchannel heat sink Thermal conductivity Thermal management
Li Z.; Wu L.; Shaban M.; Abed A.M.; Bu sinnah Z.A.; Almadhor A.; Ghandour R.; Abdullaeva B.; Alkhalaf S.; Albalawi H.
Journal of Energy Storage , Vol. 122
3 استشهاد Article English ISSN: 2352152X
School of Architectural Engineering, Chongqing Chemical Industry Vocational College, Chongqing, 401228, China; Sichuan Communication Surveying & Design Institute Co Ltd, Chengdu, 610017, China; Department of Physics, Faculty of Science, Islamic University of Madinah, Madinah, 42351, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Science and Technology (Mathematics Program), University Colleges at Nairiyah, University of Hafr Albatin (UHB), Hafr Al-Batin, 31991, Saudi Arabia; Department of Computer Engineering and Networks, College of Computer and Information Sciences, Jouf University, Saudi Arabia; College of Engineering and Technology, American University of the Middle East, Egaila, 54200, Kuwait; Department of Mathematics and Information Technologies, Vice-Rector for Scientific Affairs, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Department of Computer Engineering, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Physics, College of Sciences, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia
The increasing global energy demand has intensified environmental challenges. Solar energy faces limitations due to its intermittent availability, necessitating efficient energy storage solutions. Latent thermal energy storage (LTES) systems utilizing phase change materials (PCMs) offer high energy density but are hindered by poor thermal conductivity. To overcome this limitation, an innovative LTES system was introduced. The system incorporated three dividers to increase the heat transfer surface area and facilitate the division of the system into multiple enclosures that can simultaneously accommodate different PCMs. RT50 was used as the PCM in all four enclosures. Artificial neural network-driven predictive models were employed to model the impact of the dividers' geometrical parameters, specifically, the radii of dividers in three enclosures (R1, R2, and R3) on the liquid fractions achieved during 3-hour and 6-hour melting periods. Optimization using a genetic algorithm identified two optimal storage configurations of OS1 (R1 = 136.84 mm, R2 = 216.725 mm, and R3 = 297.73 mm) and OS2 (R1 = 150 mm, R2 = 240 mm, and R3 = 293.495 mm) that maximize liquid fractions at 3 and 6 h, respectively. In a 3-hour melting period, OS1 exhibited an impressive 103.11 % improvement in liquid fraction compared to the divider-less sample. Similarly, after 6 h, OS2 demonstrated a 98 % increase in liquid fraction. However, a significant portion of PCM remained unmelted in the second and third enclosures, leading to the recommendation of using RT28 in these sections while maintaining RT50 in the first and fourth enclosures. The OS2-RT28 absorbed 10.12 % more energy than OS2-RT50 and achieved a remarkable 96.79 % improvement in total absorbed energy compared to the divider-less system. A multi-objective optimization and Pareto fronts for the liquid fractions achieved during 3-hour and 6-hour melting periods were also presented. © 2025 Elsevier Ltd
الكلمات المفتاحية: Clean energy Data-driven techniques Genetic algorithm Latent thermal energy storage Optimization Plate heat exchanger
Deng W.; Li J.; Samad S.; Abed A.M.; Almadhor A.; Alhumaid S.; Al Barakeh Z.; Ghandour R.; Abdullaeva B.; Ali H.E.
Journal of Energy Storage , Vol. 131
3 استشهاد Article English ISSN: 2352152X
school of intelligent manufacture, Chongqing Creation Vocational College, Chongqing, 402160, China; School of Artificial intellegence, Chongqing Youth Vocational & Technical College, Chongqing, 401320, China; Department of Management, College of Business Administration, Princess Nourah bint Abdulrahman University, Riyadh, 11671, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Computer Engineering and Networks, College of Computer and Information Sciences, Jouf University, Saudi Arabia; Department of Mechanical Engineering, University of Hail, Hail, 81481, Saudi Arabia; College of Engineering and Technology, American University of the Middle East, Egaila, 54200, Kuwait; Department of Mathematics and Information Technologies, Vice-Rector for Scientific Affairs, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Physics Department, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia
Latent heat storage (LHS) systems rely on phase change materials (PCMs) to efficiently store and release thermal energy. However, conventional single-body designs often suffer from reliability and scalability issues. A modular multi-section LHS system incorporating three dome-shaped components was developed to address these challenges. Each dome wall serves as a dedicated heat transfer fluid (HTF) channel, eliminating the need for fins. A Multilayer Perceptron (MLP) model was employed to predict energy absorption over 3-hour and 5-hour durations, with key geometric parameters, such as dome height and width. The MLP was coupled with a genetic algorithm to identify optimal configurations, while TOPSIS analysis and Pareto fronts were applied for comprehensive multi-criteria evaluation. The MLP model exhibited excellent performance with an R2 value of 0.99 and very low RMSE and MAE values, confirming its reliability and high predictive accuracy. Identifying optimal configurations becomes paramount, given the crucial role of thermal energy storage in modern energy systems. This study revealed three high-performance designs (Opt1, Opt2, and the TOPSIS-selected case) that markedly outperformed the base configuration regarding energy absorption. The optimization process identified Opt1 as the most effective design for rapid energy uptake, achieving 21,980 kJ of absorbed energy within 5 h, of which 21,912 kJ (99.7 %) was captured within 170 min. This represents a 222 % improvement over the base design and a 17 % enhancement compared to Opt2 in the same timeframe. In contrast, Opt2 delivered the highest cumulative energy storage, highlighting its superiority in long-duration performance. Opt2 achieved 23,495 kJ of energy absorption over 5 h, representing a 115 % increase over the base design and 6.9 % more than Opt1. Ultimately, the configuration selected via TOPSIS analysis provided a balanced trade-off between energy storage capacity and charging speed. It achieved 21,948 kJ and 22,386 kJ of absorbed energy over 3 and 5 h, respectively, marking a 207 % and 105 % improvement relative to the base design. © 2025 Elsevier Ltd
الكلمات المفتاحية: Earth warming Latent heat storage Multilayer perceptron Pareto fronts Solar energy Sustainable strategies TOPSIS analysis
Abed A.M.; Kumar A.; Jain V.; Ab Yajid M.S.; Chahar M.; Raju G.S.; Rusho M.A.; Alkahtani H.M.
Solid State Sciences , Vol. 161
3 استشهاد Article English ISSN: 12932558
Mechanical Power Technical Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Hilla, Babylon, 51001, Iraq; Department of Electronics and Communication Engineering, GLA University, Mathura, 281406, India; Marwadi University Research Center, Department of Chemistry, Faculty of Science, Marwadi University, Gujarat, Rajkot, 360003, India; Management and Science University, Selangor, Shah Alam, Malaysia; Department of Chemistry, NIMS Institute of Engineering & Technology, NIMS University Rajasthan, Jaipur, India; Department of Chemistry, Chandigarh Engineering College, Chandigarh Group of Colleges-Jhanjeri, Punjab, Mohali, 140307, India; Department of Lockheed Martin Engineering Management, University of Colorado, Boulder, 80309, CO, United States; Department of Pharmaceutical Chemistry, College of Pharmacy, King Saud University, P.O. Box 2457, Riyadh, 11451, Saudi Arabia
In the rapidly evolving landscape of energy storage, magnesium-ion batteries (MIBs) have emerged as a promising alternative to traditional lithium-ion technologies, offering compelling advantages in cost and performance. Our research leverages advanced density functional theory (DFT) computations to explore boron-doped carbon nanosheets (BCx) as a potential anode material for next-generation MIBs. The innovative BCx nanostructure demonstrates exceptional characteristics, including high porosity and remarkable Mg ion binding capabilities. Through comprehensive computational analysis, we investigated critical parameters such as diffusion energy barrier, theoretical specific capacity, and open-circuit voltage. Our findings reveal remarkable performance metrics: complete Mg ion saturation, a theoretical specific capacity of 623.53 mAh g−1, and an impressively low open-circuit voltage of 0.10 V. The unique B2C4 ring structure facilitates efficient Mg ion diffusion, positioning BCx as a promising candidate for advanced energy storage solutions. © 2025 Elsevier Masson SAS
الكلمات المفتاحية: Boron-doped carbon nanosheets Magnesium-ion batteries Open-circuit voltage Specific capacity
Togun H.; Basem A.; Jweeg M.J.; Mohammed H.I.; Abed A.M.; Anqi A.E.; Rashid F.L.; Shelare S.; Slimi K.; Barmavatu P.
Energy and Buildings , Vol. 349
3 استشهاد Review English ISSN: 03787788
Thi-Qar Technical College, Southern Technical University, Basrah, Iraq; Advanced Technical College, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Al-Farahidi University, College of Technical Engineering, Baghdad, Iraq; Physics department, College of Education, University of Garmian, Kurdistan region, Kalar, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq; Department of Mechanical Engineering, Priyadarshini College of Engineering, Maharashtra, Nagpur, 440019, India; Centre of Research Impact and Outcome, Chitkara University, 140 401, Punjab, Rajpura, India; Energetic and Thermal Studies Systems Laboratory, National Engineering College, University of Monastir, Ibn El-Jazzar Street, Monastir, 5019, Tunisia; Department of Mechanical Engineering, Faculty of Engineering, Universidad Tecnológica Metropolitana, Santiago, 7810003, Chile
The research paper provides an in-depth survey of recent advancements in PCM technology, emphasizing novel encapsulating methods that guarantee stability and safety as well as high-performance materials with improved thermal characteristics and durability. In order to improve thermal comfort and energy efficiency in buildings, phase change materials, or PCMs, are showing promise as substitutes. There are still problems with long-term performance, scalability, and practical implementation despite advancements in our understanding of PCM fundamentals and applications. This research investigates the integration of PCMs into intelligent, adaptive building systems, as well as the optimization of PCM-based solutions, including design considerations, lifespan analysis, economic feasibility, and environmental impact. This review provides significant insights for academics, engineers, and policymakers in the construction and energy industries by linking theoretical studies to practical applications. The outcomes demonstrate PCMs’ ability to promote sustainable and resilient urban growth while solving crucial energy concerns. The analysis emphasizes the need for ongoing research and development to overcome existing constraints and fully realize the advantages of PCM technology in building applications. Encouraging collaboration among academics, business, and government will be critical for advancing the implementation of PCM-based solutions and constructing energy-efficient, pleasant, and environmentally friendly structures. © 2025 Elsevier B.V.
الكلمات المفتاحية: Building Design Energy Efficiency Intelligent Building Systems Phase Change Materials (PCMs) Smart Building Solutions
Togun H.; Basem A.; Kadhum A.A.H.; Mohammed H.I.; Abed A.M.; Anqi A.E.; Chattopadhyay A.; Sharma B.K.; Homod R.Z.; Barmavatu P.
International Communications in Heat and Mass Transfer , Vol. 169
3 استشهاد Review English ISSN: 07351933
Thi-Qar Technical College, Southern Technical University, Basrah, Iraq; Advanced Technical College, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; College of Medicine, University of Al-Ameed, Karbala, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Education Directorate, Higher Education Department, Bikash Bhavan, Kolkata, 700091, India; Department of Mathematics, Birla Institute of Technology and Science, Pilani, India; Department of Oil and Gas Engineering, Basrah University for Oil and Gas, Basrah, Iraq; Department of Mechanical Engineering, Faculty of Engineering, Universidad Tecnológica Metropolitana, Santiago, 7810003, Chile
This review comprehensively examines the transformative impact of machine learning (ML) on heat exchanger modeling, synthesizing recent trends and innovations to address the limitations of conventional thermal design methods. The primary objective is to provide a structured analysis of how data-driven approaches are surpassing traditional correlations in optimizing efficiency, enhancing predictive accuracy, and enabling condition-based maintenance. To this end, the paper methodologically categorizes and evaluates applications of supervised, unsupervised, and reinforcement learning paradigms, detailing their respective roles in predicting thermal-hydraulic performance, identifying operational anomalies, and dynamically optimizing control systems. A key novelty of this review lies in its focused exploration of the synergistic integration of ML with high-fidelity simulation tools like Computational Fluid Dynamics (CFD) and IoT-based sensor networks, a convergence that is pioneering the development of intelligent digital twins. By critically assessing these developments, this work underscores the paradigm shift toward intelligent thermal management and highlights emerging research directions that promise to further advance the field toward greater sustainability and operational autonomy. © 2025 Elsevier Ltd
الكلمات المفتاحية: Data-driven techniques Heat exchanger modeling Machine learning Predictive maintenance Thermal optimization
Abed A.M.; Shawabkeh A.; Jhala R.; Ramachandran T.; Shankhyan A.; Mann V.S.; Singh R.; Salah B.
Thermal Science and Engineering Progress , Vol. 58
3 استشهاد Article English ISSN: 24519049
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hillah, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; College of Engineering and Technology, American University of the Middle East, Kuwait; Marwadi University Research Center, Department of Mechanical Engineering, Faculty of Engineering & Technology, Marwadi University, Gujarat, Rajkot, 360003, India; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Karnataka, Bangalore, India; Centre for Research Impact & Outcome, Chitkara University Institute of Engineering and Technology, Chitkara University, Punjab, Rajpura, 140401, India; Department of Mechanical Engineering, Chandigarh Engineering College, Chandigarh Group of Colleges-Jhanjeri, Punjab, Mohali, 140307, India; Department of Mechanical & Aerospace Engineering, NIMS Institute of Engineering & Technology, NIMS University Rajasthan, Jaipur, India; Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, 12372, Saudi Arabia
In the current research, the gas turbine unit has been used as a driver in the multi- generation system; due to the large amount of waste heat from the gas turbine, the carbon dioxide recondensation cycle has been used to recover it and produce power. Besides the output heat of the gas turbine's combustion chamber component is used in the methanol-steam reforming cycle to produce hydrogen. Finally, the desalination unit and the absorption chiller cycle by recovering waste heat in the last step, produces freshwater and cooling. Dissected from energy, exergy, exergo-economic, environmental and exego-environmental aspects, in this research. The thermodynamic analysis of each system component showed that the multi-generation systems could produce 1608 kW of electric power, 3.582 kg/s of fresh water, 0.1952 kg/s of hydrogen and 416.5 kW of cooling. Also, the energy and exergy efficiencies of the simultaneous production system were calculated as 53.35 % and 66.56 %, respectively. In the end, the CO2 emission rate and the sum unit cost of product were calculated as 205.1 kg/MWh and 233.2 $/kWh, respectively. © 2025 Elsevier Ltd
الكلمات المفتاحية: Absorption chiller Biogas Gas turbine Methanol-steam reforming Multi-effect desalination Multi-generation system Supercritical carbon dioxide cycle
Togun H.; Basem A.; Abdulrazzaq T.; Shashidhara S.; Mohammed H.I.; Abed A.M.; Al-Thamir M.; Sadeq A.M.; Biswas N.; Yadav K.K.
Open Engineering , Vol. 15 (1)
2 استشهاد Article English ISSN: 23915439
Thi-Qar Technical College, Southern Technical University, Basrah, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Department of Chemical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; School of Materials Science and Engineering, Nit Calicut, Calicut, 673601, India; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Scientific Research Center, Al-Ayen University, Thi-Qar, Iraq; Department of Mechanical and Industrial Engineering, College of Engineering, Qatar University, PO Box 2713, Doha, Qatar; Department of Power Engineering, Jadavpur University, Kolkata, Salt Lake, 700106, India; Faculty of Science and Technology, Madhyanchal Professional University, Bhopal, Ratibad, 462044, India
This work examines the effects of staggered transverse zigzag baffles and hybrid nanofluid flow in a channel on the ferrofluid flow characteristics. The hybrid nanofluids Al2O3-Cu (2%) flow through the horizontal channel and are heated from the bottom. The W-shaped baffles, attached to the heated bottom wall, faced the right-hand side at an angle of 45° to the flow attack. Four different cases of baffle arrangements are also scrutinized. The mathematical models are analyzed numerically using the finite volume-based technique, adopting the k-w turbulence model. The key contribution of this study is the innovative combination of zigzag baffles with hybrid nanofluids, providing an effective passive method for improving heat transmission in industrial uses. The findings indicate substantial enhancements: a heat transfer improvement of up to 92.4% relative to smooth channel flow and a 48.5% increase in pressure drop. The research indicates that the orientation and positioning of the baffle substantially affect the density and intensity of created vortices, hence optimizing turbulence and flow redirection. Due to the reduction in the fluid velocity (initiated by the baffles) and increasing turbulence, the pressure in the flow passage increases with increasing Re, and the pressure reduces as the flow passes through the domain. The baffles' direction has a considerable impact on the turbulence; the baffles' top point and angle of direction also impact the flow direction and density of the swirls produced. © 2025 the author(s), published by De Gruyter.
الكلمات المفتاحية: channel flow flow characteristics hybrid nanofluid turbulent flow W-shaped baffle
Yuan R.; Shi F.; Abed A.M.; Shaban M.; Samad S.; Almadhor A.; Abdullaeva B.; Aoudia M.; Alkhalaf S.; Babiker S.G.
Case Studies in Thermal Engineering , Vol. 69
2 استشهاد Article Open Access English ISSN: 2214157X
School of Management Science and Engineering, Anhui University of Finance and Economics, Bengbu, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Physics, Faculty of Science, Islamic University of Madinah, Madinah, 42351, Saudi Arabia; Department of Management, College of Business Administration, Princess Nourah Bint Abdulrahman University, Riyadh, 11671, Saudi Arabia; Department of Computer Engineering and Networks, College of Computer and Information Sciences, Jouf University, Saudi Arabia; Department of Mathematics and Information Technologies, Tashkent State Pedagogical University, Vice-Rector for Scientific Affairs, Tashkent, Uzbekistan; Department of Industrial Engineering, College of Engineering, Northern Border University, P.O. Box 1321, Arar, 91431, Saudi Arabia; Department of Computer Engineering, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Electronic Physics, Faculty of Applied Science, Red Sea University, Port Sudan, Sudan
Innovative heat recovery, CO2 capture, and energy storage methodologies are pivotal for developing sustainable and eco-friendly solutions for the energy sector. Hence, this study proposes implementing an oxyfuel combustion process for a biogas power plant, modified by an innovative heat recovery method and a CO2 capture-liquefaction technique. Furthermore, the design incorporates high-temperature water electrolysis to produce hydrogen, which is then introduced into a hydrogen liquefaction process utilizing a Claude cycle for adequate long-term storage. The research employs thermodynamic, exergoeconomic, and net present value assessments, accompanied by an extensive parametric study and optimization process. Hence, a machine learning algorithm is implemented using artificial neural networks combined with the NSGA-II method for multi-criteria optimization, focusing on exergy efficiency, net present value, and products' sum unit cost as objective functions. The implemented optimization reduces the optimization time to under 30 min, which is significantly more efficient than traditional heuristic techniques, which typically require several hours for similar systems. This optimization framework is highly applicable to both industrial and district energy systems. This approach enhances predictive analytics and streamlines resource management. In industrial environments, it effectively optimizes energy use and production processes by examining various operational factors, which leads to cost reductions and improved efficiency via predictive maintenance and cohesive energy strategies. The optimal outcomes reveal the mentioned objective functions' values at 47.22 %, 58.73 M$, and 33.53 $/GJ, respectively. Under these optimal conditions, liquid carbon dioxide and liquid hydrogen outputs are quantified at 4931 lit/h and 1848 lit/h, respectively. Finally, the proposed system can omit CO2 emissions by 1.36 kg/kWh under optimal conditions, which reflects a 5.60 % better performance than the base case. Furthermore, the products' sum unit cost decreases by 3.09 %, indicating efficient cost savings linked to the products. © 2025 The Authors.
الكلمات المفتاحية: Biogas Carbon dioxide capture-liquefaction Environmental challenges Liquid hydrogen storage Machine learning algorithm Oxyfuel combustion process
Almadhor A.; Samad S.; Shaban M.; Abed A.M.; Alhomayani F.M.; Abduvalieva D.; Knani S.; Alruwaili A.; Alturise F.; Alkhalaf S.
Applied Thermal Engineering , Vol. 277
2 استشهاد Article English ISSN: 13594311
Department of Computer Engineering and Networks, College of Computer and Information Sciences, Jouf University, Saudi Arabia; Department of Management, College of Business Administration, Princess Nourah bint Abdulrahman University, Riyadh, 11671, Saudi Arabia; Department of Physics, Faculty of Science, Islamic University of Madinah, Madinah, 42351, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Department of Mathematics and Information Technologies, Tashkent State Pedagogical University, Bunyodkor Avenue, 27, Tashkent, 100070, Uzbekistan; Center for Scientific Research and Entrepreneurship, Northern Border University, Arar, 73213, Saudi Arabia; Department of Cybersecurity, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Computer Engineering, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Physics, College of Science, Northern Border University, Arar, Saudi Arabia
This study develops a multi-generation framework utilizing geothermal energy to produce electricity, hydrogen, and cooling with high efficiency. The system integrates a Kalina cycle (KC) and an organic Rankine cycle (ORC), supported by a thermoelectric generator (TEG) for waste heat recovery and a proton exchange membrane electrolyzer (PEME) for hydrogen production. Geothermal energy is leveraged to optimize resource utilization, while waste heat is repurposed for LNG regasification, achieving full vaporization and additional power generation. Unlike previous works, this study introduces a fully integrated and cascade-utilized configuration that combines multiple thermal subsystems, each optimized in synergy. This approach enhances energy recovery and reduces system-level exergy destruction, representing a unique advancement in geothermal-based multi-generation design. The results reveal that geothermal fluid temperature (TGF) is the most critical parameter influencing the system's performance. Increasing TGF significantly enhances electricity, chilled water, and hydrogen production, improves exergy efficiency, and reduces levelized costs of electricity (LCOE) and hydrogen (LCOH). In contrast, a higher pinch point temperature difference (PPTD) at the KC evaporator reduces power and hydrogen output but increases chilled water production, revealing key trade-offs between thermal efficiency and operational outputs. Moreover, the LNG stream accounts for 40 % of the system's total exergy loss, followed by the KC (20 %) and ORC (18 %), identifying areas for targeted efficiency improvements. Optimization results show that a turbine inlet pressure of 5900 kPa achieves the highest system efficiency at 22.74 %, while genetic algorithm (GA) optimization enhances second-law efficiency to 25.11 % with an operational cost rate of 137.54 $/h. These findings demonstrate the system's ability to maximize energy recovery and improve overall cost-effectiveness, providing valuable insights for geothermal energy applications. © 2025 Elsevier Ltd
الكلمات المفتاحية: Energy reuse Geothermal energy Hydrogen production Kalina cycle LNG regasification Techno-economic optimization
Said M.A.; Sultan Aljibori H.S.; Abed A.M.; Togun H.; Mohammed H.I.; Mahdi J.M.; Talebizadehsardari P.; Ben Khedher N.
International Communications in Heat and Mass Transfer , Vol. 167
2 استشهاد Article Open Access English ISSN: 07351933
Architectural Engineering Department, University of Ha'il, P. Box 2440, Ha'il City, Saudi Arabia; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, Iraq; Thi-Qar Technical College, Southern Technical University, Basrah, Iraq; Physics Department, College of Education, University of Garmian, Kurdistan region, Kalar, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Power Electronics, Machines and Control (PEMC) Research Group, University of Nottingham, Nottingham, United Kingdom; Department of Mechanical Engineering, University of Ha'il, Ha'il City, 81451, Saudi Arabia
The worldwide need for sustainable energy solutions requires the improvement of latent heat thermal energy storage (LHTES) systems for efficient thermal response. This comprehensive study examines the impact of employing new sunburst-distributed radial fins on the thermal efficiency of phase change material (PCM) inside the shell-and-multitube LHTES system. The main goal is to address the intrinsic poor thermal conductivity of the PCM, which constrains energy charging and discharging rates. A two-dimensional model was developed employing the finite-volume method and the enthalpy-porosity approach to simulate the melting and solidification of PCM. The model was tested using experimental data from relevant literature. The effects of alerting the fin geometrical parameters, including the number, length, and distribution were parametrically quantified and reported. The results reveal that the new sunburst-distributed radial fin configuration can substantially surpass traditional fin configurations. The findings indicate that augmenting the fin count from 4 to 8 reduces the melting duration by 40.5 % and improves the heat retention rate by 71.5 %. Lengthening the fins saves solidification time by 48.1 % and enhances heat recovery rate by 91.6 %. The innovative sunburst-distributed radial fin arrangement (Case 7) cuts the melting time by 19.14 % and enhances heat storage capacity by 21.57 % vs to conventional long-fin designs. These findings significantly advance LHTES system design, offering quantitative insights into optimizing fin geometry for enhanced thermal performance. © 2025
الكلمات المفتاحية: Fin array Latent heat storage Melting Shell and multi-tube Solidification
Jing D.; Abed A.M.; Patel P.; Arunkumar D.T.; Aulakh D.; Salah B.; Mahariq I.
International Journal of Hydrogen Energy , Vol. 114, pp. 31-51
2 استشهاد Article English ISSN: 03603199
Xining University, Shaanxi, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hillah, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Marwadi University Research Center, Department of Mechanical Engineering, Faculty of Engineering & Technology, Marwadi University, Gujarat, Rajkot, 360003, India; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Karnataka, Bangalore, India; Centre for Research Impact & Outcome, Chitkara University Institute of Engineering and Technology, Chitkara University, Punjab, Rajpura, 140401, India; Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh, 12372, Saudi Arabia; Department of Mathematics, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Tamil Nadu, Chennai, 602105, India; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; University College, Korea University, Seoul, 02481, South Korea; Applied Science Research Center, Applied Science Private University, Amman, Jordan
Liquid H2 production using the Claude cycle requires an appropriate refrigeration cycle for initial cooling of gaseous H2. Additionally, the modified generator-absorber heat exchanger cycle exhibits higher coefficient of performance among refrigeration cycles and can operate at very low temperatures approaching negative 30 °C. In this work, a modified generator-absorber heat exchanger cycle, geothermal energy, and Claude cycle are combined to produce and store liquid H2. A comprehensive analysis is conducted, including thermodynamic, economic, sustainability, net present value, environmental perspectives, and multi-objective optimization using an artificial neural network and the multi-objective grey wolf optimizer. Compressor pressure has no effect on the amount of produced liquid H2, remaining constant at 12.55 kg/s. Key results show an exergetic efficiency increase to 24.27%, a reduction in liquefied H2 cost to 1.482 $/kg, and a decrease in system cost rate to 45.71 $/h. The liquefied H2 mass flow rate is optimized at 4.178 kg/s, while compressor power consumption dropped to 214.2 MW, and turbine power output reached 13.54 MW. The payback period is shortened to 3.39 years, with the net present value exceeding 40 M$ over 20 years. Sensitivity analysis revealed that evaporator temperature (51.4%) and compressor pressure (57.1%) are the most influential factors. © 2025
الكلمات المفتاحية: Claude cycle Environmental assessment Geothermal energy Modified GAX cycle Multi-objective optimization
Opakhai S.; Abed A.M.; Mukhtar A.; Abduvokhidov A.; Madaminov B.; Madaminov S.
International Journal of Hydrogen Energy , Vol. 159
2 استشهاد Article English ISSN: 03603199
Institute of Physics and Technical Science, L.N. Gumilyov Eurasian National University, Astana, 010000, Kazakhstan; Mechanical Power Technical Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Institute of Sustainable Energy, Putrajaya Campus, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, Kajang, 43000, Malaysia; New Uzbekistan University, Movarounnahr Street 1, Tashkent, 100000, Uzbekistan; Andijan State University, Universitet Str. 129, Andijan, 170100, Uzbekistan; Mamun University, Bolkhovuz Street 2, Khiva, 220900, Uzbekistan; Urgench State University, Urgench, 220100, Uzbekistan
Photoelectrochemical (PEC) water splitting offers a promising route for solar hydrogen production, but current systems suffer from limited light absorption, poor charge separation, and inadequate stability. This study aimed to develop a novel gradient-bandgap semiconductor array architecture to overcome these fundamental limitations and enhance solar-to-hydrogen (STH) conversion efficiency. Gradient-bandgap semiconductor arrays were fabricated via atomic layer deposition, creating sequential layers of TiO2, WO3, and BiVO4 with compositionally graded interfaces. XRD, HRTEM, XPS, and UV–vis spectroscopy provided photoelectrode characterization. Under simulated AM 1.5G illumination, the photoelectrochemical capabilities were assessed via intensity-modulated photocurrent spectroscopy, electrochemical impedance spectroscopy, incident photon-to-current efficiency, and current-voltage measurements. The gradient-bandgap architecture attained a STH conversion efficiency of 12.32 %, representing a 7.1-fold improvement over single-material BiVO4 photoelectrodes (1.73 %). Photocurrent density reached 16.78 mA/cm2 at 1.23 V versus reversible hydrogen electrode, with a corresponding hydrogen evolution rate of 6.21 mmol/h·cm2. The photoelectrode demonstrated exceptional stability, retaining 95.1 % of its initial performance after 200 h of continuous operation. Charge transfer efficiency reached 90.4 %, significantly higher than the 59.2–75.8 % observed in single-material electrodes, while carrier lifetime extended to 18.3 ns (39–115 % improvement over individual components). The gradient-bandgap semiconductor array design successfully addresses the critical limitations of conventional photoelectrodes through synergistic integration of complementary materials with engineered interfaces. This approach provides a practical pathway toward high-efficiency, durable, and economically viable solar hydrogen production without requiring expensive noble metal catalysts. © 2025 Hydrogen Energy Publications LLC
الكلمات المفتاحية: Bandgap engineering Hydrogen generation Photoelectrochemical Solar energy Water splitting
Atiya M.A.; Hussien A.N.; Abed A.M.; Mandin P.; Lattieff F.A.
Al-Khwarizmi Engineering Journal , Vol. 21 (1), pp. 1-12
1 استشهاد Article Open Access English ISSN: 18181171
Department of Biochemical Engineering, Al-Khawarizmi College of Engineering, University of Baghdad, Baghdad, Iraq; Department of Biomedical Engineering, University of Technology, Baghdad, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University, Babylon, Iraq; Institut de Recherche Dupuy de Lôme, Université de Bretagne Sud, IRDL UMR CNRS 6027, Lorient, 56100, France; Department of Energy Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq
Earth–air heat exchangers (EAHE) hold great promise for reducing typical air conditioning systems’ energy consumption whilst preserving high indoor comfort. The present analyses a 3D model using COMSOL Multiphysics software for a geothermal heat exchanger to examine the thermal behavior along the piping system. The experimental findings of the real EAHE in Baghdad City during January and June are transferred into the nonisothermal pipe flow interface for modeling temperature, velocity and pressure distributions along the piping system. The temperature variation of subsurface soil and the radial temperature distribution around the pipe are modeled into the heat transfer interface. The magnitude of heat flux is also computed in different times along the pipe. The effects of the continuous operation of EAHE on the output temperature and on the soil temperature around the pipe are also considered. The model’s output demonstrates that the air temperature rise in January is 10 °C, whereas the air temperature drop is 14 ℃ in June. The effect of extracted/absorbed heat transfer from/to air in pipes is extended up to 0.7 m in the radial direction of the soil surrounding pipes due to continuous airflow in EAHE. © 2025, University of Baghdad. All rights reserved.
الكلمات المفتاحية: COMSOL earth heat exchanger geothermal energy sandy soil thermal analysis
Abouzied A.S.; Farouk N.; Shaban M.; Abed A.M.; Alhomayani F.M.; Formanova S.; Khan M.N.; Alturise F.; Alkhalaf S.; Albalawi H.
Energy , Vol. 322
1 استشهاد Article English ISSN: 03605442
Department of Pharmaceutical Chemistry, College of Pharmacy, University of Hail, Hail, 81442, Saudi Arabia; Mechanical Engineering Department, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Mechanical Engineering Department, Faculty of Engineering, Red Sea University, Port Sudan, Sudan; Department of Physics, Faculty of Science, Islamic University of Madinah, Madinah, 42351, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Department of Chemistry and Its Teaching Methods, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Department of Mechanical and Industrial Engineering, College of Engineering, Majmaah University, Al-Majmaah, 11952, Saudi Arabia; Department of Cybersecurity, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Computer Engineering, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Physics, College of Sciences, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia
To address the growing demand for sustainable energy solutions and the need for efficient utilization of resources, this study investigates the optimization of energy and exergy efficiencies in an integrated clean energy system using different machine learning algorithms. The analysis of variance (ANOVA) results demonstrated the significant impact of the utilization factor and temperature on system efficiencies, with the utilization factor showing a more pronounced effect. The single-objective optimization results revealed that decreasing the utilization factor significantly improves energy efficiency, while temperature has a minor influence. In the multi-objective optimization, the desired ranges for energy efficiency (62.5–63.1 %) and exergy efficiency (27.4–27.8 %) were set. The results identified an optimum point with a utilization factor of 0.763 and a temperature of 818.9 °C, achieving an energy efficiency of 63.02 % and an exergy efficiency of 27.77 %. These values fall within the desired ranges, confirming the effectiveness of the optimization approach by machine learning algorithms. The alignment between the machine learning predictions and thermodynamic modeling results further validated the accuracy and reliability of machine learning algorithms. The study highlights the importance of managing the utilization factor and temperature to optimize system efficiencies and provides a robust framework for future research and development in sustainable energy solutions. © 2025 Elsevier Ltd
الكلمات المفتاحية: Clean energy Efficiency Energy storage Machine learning Optimization
Yu X.; Abed A.M.; Alghassab M.A.; Khan M.N.; Alhomayani F.M.; Chen Z.; Tian J.
Energy , Vol. 316
1 استشهاد Article English ISSN: 03605442
Department of Computer Science, Tangshan Normal University, Hebei, Tangshan, 063000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Electrical Engineering Department, College of Engineering, Shaqra University, Riyadh, 11911, Saudi Arabia; Department of Mechanical and Industrial Engineering, College of Engineering, Majmaah University, Al-Majmaah, 11952, Saudi Arabia; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia
This study introduces a novel integrated solar energy system planned to maximize energetic efficiency, reduce environmental concerns, and enhance economic viability. By incorporating multiple technologies, including PV/T panels, an ORC, a TEG, an absorption chiller, and a PEM electrolyzer, this system offers a comprehensive solution for sustainable energy generation. Through optimization and analysis, significant performance improvements have been achieved. Exergy efficiency has increased from 19 % to 35 % by mitigating energy losses. Net power generation has also increased from 40 MW to 46 MW, boosting the system's energy output. The system's capability to reduce CO2 emissions by 10 % contributes to lowering climatic changes and allowing sustainable energy practices. Additionally, the LCOE has decreased from 10 cents/kWh to 6.2 cents/kWh, making the system more economically attractive. A case study in Saudi Arabia demonstrates the system's adaptability to diverse climatic conditions. The analysis explores how the system performs across different seasons, considering variations in temperature and solar irradiance. This comprehensive approach, combining multiple functionalities and addressing the challenges of diverse climates, positions this integrated solar energy system as a promising solution for sustainable energy production, particularly in regions with high solar irradiation. © 2025 Elsevier Ltd
الكلمات المفتاحية: Efficiency optimization Energy independence Green hydrogen production Multifunctionality Waste heat utilization
Yang X.; Bai Z.; Samad S.; Abed A.M.; El-Zahar E.R.; Li Y.; Al Barakeh Z.; Ghandour R.; Abdullaeva B.; Ali H.E.
Energy , Vol. 337
1 استشهاد Article English ISSN: 03605442
Shandong Engineering Research Center of New Energy Materials and Devices, Weifang University of Science and Technology, Weifang, China; School of Electronic Engineering and School of Intelligent Manufacturing, Anhui Xinhua University, Hefei, China; Department of Management, College of Business Administration, Princess Nourah bint Abdulrahman University, Riyadh, 11671, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mathematics, College of Science and Humanities in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Basic Engineering Science, Faculty of Engineering, Menoufia University, Shebin El-Kom, 32511, Egypt; School of Computer Engineering, Weifang University, Weifang, China; College of Engineering and Technology, American University of the Middle East, Egaila, 54200, Kuwait; Department of Mathematics and Information Technologies, National Pedagogical University of Uzbekistan, Tashkent, Uzbekistan; Physics Department, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia
Solar thermal systems face significant challenges due to daily solar variability, requiring advanced simulation and design methods. This study addresses these issues using a three-state numerical simulation, thermal energy storage, and artificial intelligence-based analysis. The proposed system comprises a solar power tower and an energy storage option designed to support a supercritical CO2 plant. Additionally, this plant is integrated with reverse osmosis desalination and a proton exchange membrane electrolyzer. A three-mode numerical simulation—solar, solar-storage, and storage—is conducted, and an artificial intelligence-driven multi-objective optimization using the NSGA-II algorithm is applied to enhance performance and cost efficiency. Under optimal conditions, the system exhibits a hydrogen production capacity of 54203 m3/day, a net power output of 4415 kW, an exergy round-trip efficiency of 23.01 %, and a unit cost of products (UCOP) of 33.41 $/GJ. The levelized cost of hydrogen is calculated to be 5.06 $/kg, with a net present value of 214.5 M$ and a payback period of 9.4 years. In addition, the entire installation indicates a cost rate of 1436 $/h. Compared to the base case, hydrogen output is improved by 29.7 %, and UCOP is reduced by 12.5 %. These results highlight the system's potential for cost-effective, zero-carbon hydrogen production using solar energy. © 2025 Elsevier Ltd
الكلمات المفتاحية: Artificial intelligence Desalination Hydrogen generation Optimization Solar thermal application Thermal energy storage
Xu Y.; Li H.; Abed A.M.; El-Shorbagy M.A.; Dutta A.K.; Abdullaev S.; Garalleh H.A.; Alqaralleh R.M.; Elmasry Y.; Alrawashdeh A.I.
Desalination , Vol. 594
1 استشهاد Article English ISSN: 00119164
School of Chemistry and Pharmaceutical Engineering, Huanghuai University, Zhumadian, 463000, China; Department of Electronic and Information Engineering, Bozhou University, Bozhou, 236800, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mathematics, College of Science and Humanities in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Basic Engineering Science, Faculty of Engineering, Menoufia University, Shebin El-Kom, 32511, Egypt; Department of Computer Science and Information Systems, College of Applied Sciences, AlMaarefa University, Ad Diriyah, Riyadh, 13713, Saudi Arabia; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Department of Science and Innovation, Tashkent State Pedagogical University named after Nizami, Tashkent, Uzbekistan; Department of Mathematical Science, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Civil and Environmental Engineering, Mu'tah University, Al-Karak, Jordan; Department of Mathematics - College of Science - King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Department of General Subjects, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Chemistry and Chemical Technology, College of Science, Tafila Technical University, Tafila, 66110, Jordan
The global demand for potable water is rising, prompting the development of various energy systems for distilled water production. However, the significance of utilizing multicomponent working fluids in these systems has been largely overlooked. This study presents computer modeling of three HDH-based distillation units powered by two conventional heat pump cycles, namely, the simple and vapor injection heat pumps (first and second models) and an innovative heat pump cycle with an ejector expander (third model). The significance of the research lies in its pioneering investigation of utilizing two- and three-component mixtures in heat pump-based desalination units, which has not been previously explored. The study's primary aim is to determine whether using multicomponent working fluids instead of pure fluids or introducing structural modifications can more effectively enhance the performance of heat pump-based distillation units. The proposed models are simulated using EES and MATLAB software, with the study focusing on energetic, exergetic, exergoeconomic, and heat exchanger modeling to evaluate the feasibility of the configurations. The findings revealed that the structural modifications in the third scenario using R134a resulted in the highest GOR, with improvements of 44 % and 26.03 %, respectively, compared to the other scenarios. However, utilizing binary blend R22/R142b with different compositions improved the GOR of the first to three scenarios by 41.26 %, 29.06 %, and 11.87 %, respectively. Furthermore, in this case, the unit cost of distilled water for the first, second, and third scenarios increased by 12.87 %, 14.32 %, and 12.70 %, respectively. Finally, the first scenario has the highest NPV of 4.40 M$ and the shortest PP of 8.13 years. Therefore, utilizing the blend in a simple heat pump proves to be more efficient and cost-effective than implementing structural modifications. © 2024 Elsevier B.V.
الكلمات المفتاحية: Ejector expander Heat pump Humidification-dehumidification (HDH) Indirect integration Organic blend Vapor injection
Kong J.; Mamyrbayev O.; Abed A.M.
Energy , Vol. 329
1 استشهاد Article English ISSN: 03605442
School of Economics and Management, Tianjin Chengjian University, Tianjin, 300384, China; School of Architecture, Tianjin University, Tianjin, 300072, China; Institute of Information and Computational Technologies, Almaty, Kazakhstan; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hillah, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq
The design and architecture of buildings are critical stages in construction, with significant emphasis on environmental sustainability and energy efficiency. Achieving a net-zero energy architectural design necessitates careful consideration of the building's location. This simulation-based study introduces a novel hybrid model that integrates remote sensing (RS) techniques with the analytical hierarchy process (AHP) and a machine learning (ML) algorithm (M5 model tree) to optimize and validate site selection for net-zero energy buildings (NZEBs) in Xi'an, China. The proposed approach enhances decision-making accuracy by leveraging RS data and ML-based validation for robustness. Simulated datasets, derived from RS and applied scenarios, were used to evaluate key factors such as solar energy radiation, climatic conditions, green space distribution, accessibility, population density, and proximity to renewable energy sources. The results demonstrated that solar energy radiation, accessibility, and proximity to renewable energy sources were the most influential factors, with weights of 0.40, 0.25, and 0.20 in the AHP analysis and 0.42, 0.25, and 0.18 in the M5 model tree validation, respectively. Thirteen urban areas of Xi'an were analyzed, and the results indicated that Zones 3, 6, and 8 received the highest suitability scores, while Zones 9, 12, and 13 were deemed the least suitable for NZEB projects. The hybrid model demonstrated high accuracy, with a Pearson correlation coefficient of 0.91 confirming strong agreement between the AHP-derived weights and the M5 model tree predictions, validating the consistency and robustness of the decision-making framework. The findings provide practical aspect for urban planners and policymakers, offering a data-driven framework that ensures NZEB developments align with energy efficiency goals and environmental policies. © 2025 Elsevier Ltd
الكلمات المفتاحية: Analytical hierarchy process (AHP) M5 model tree Net-zero energy buildings (NZEBs) Remote sensing (RS) Site selection
Abdulkadhim A.; Al-Shati A.S.; Hamza N.H.; Abdulsada M.; Abed A.M.; Majdi H.S.
Australian Journal of Mechanical Engineering , Vol. 23 (3), pp. 509-526
1 استشهاد Article English ISSN: 14484846
Mechanical Engineering Department, College of Engineering, University of Al-Qadisiyah, Al-Qadisiyah, Iraq; Chemical Engineering and Petroleum Industries Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hillah, Iraq; Oil Pipelines Company, Ministry of Oil, Daura, Baghdad, Iraq; Mechanical Power Techniques Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Babylon Province, Hillah, Iraq
The present work numerically demonstrates the uniform magnetohydrodynamics Newtonian, laminar natural convection in elliptical cold enclosure with inner hot circular body considering the influence of its vertical movement on the fluid flow and heat transfer. The gap area between the elliptical enclosure and the inner body had been filled by the Al2O3-water nanofluid in the upper layer, whereas lower layer has been filled by the porous medium that has been saturated by an identical nanofluid. The local thermal equilibrium model had been implemented to model the nanofluid and porous media. Additionally, Darcy–Brinkman model considered in the representation of the porous media. The three governing equations of heat and fluid flow like energy and momentum of fluid, in addition to the continuity equation, had been solved numerically utilising finite element formulation. The parameters under investigation are the Rayleigh number value (Formula presented.), Darcy number (Formula presented.), and Hartmann number (Formula presented.). Additionally, two geometrical parameters had been selected, which are the three different locations of inner cylinder (top, middle, bottom), as well as the four different values of the enclosure’s orientation angle (Formula presented.). The results have been presented to reflect the influence of the abovementioned parameters on isotherms and streamlines, besides Nusselt’s number. It has been proved that to improve the heat transfer rate, it is better to locate inner body in bottom region. The Nusselt number increases by 17.44% when it is moved from the top to the bottom. Additionally, the Nusselt number along the elliptical enclosure attached to the nanofluid layer when rotating the elliptical body from (Formula presented.) into (Formula presented.) leads to lower the Nusselt number by 32.3372%. This result is exactly inverse considering Nusselt number along nanofluid–porous layer which proved that increasing the orientation angle from (Formula presented.) to (Formula presented.) contributed to enhancing Nusselt number by 24.7009%. © 2024 Engineers Australia.
الكلمات المفتاحية: Enclosure inner body MHD nanofluid orientation angle porous medium
Fayad M.A.; Abed A.M.; Ali Hussain H.; Mohammed A.; Bassim Al-Baghdadi S.; Rahman Mahdi R.; Omran S.H.; Badawy T.
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences , Vol. 125 (2), pp. 93-105
1 استشهاد Article Open Access English ISSN: 22897879
Energy and Renewable Energies Technology Center, University of Technology-Iraq, Baghdad, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hilla, 51001, Iraq; Advance Welding Solutions Company Ltd, Baghdad, Iraq; Department of Electromechanical Engineering, University of Technology-Iraq, Baghdad, Iraq; Mechanical Power Engineering Department, Cairo University, Egypt
Multiple injections strategy have been commonly effective technique applied in engines to reduce the exhaust emissions and management of exhaust catalyst systems. The effect of post-injection strategy (PIS) on soot characteristics and emissions in compression ignition (CI) diesel engine operating with oxygenated fuels (B100, B20 and B16) was experimentally studied in this study. In addition, the effect of PIS and oxygenated fuels properties on emissions, oxidation reactivity and nanostructure of soot emissions are studied and analysed. It is indicated that the PIS increase the emissions of CO and THC, while the NOX emissions slightly decreased for all fuels. Furthermore, the NOX emissions decreased by 12.6% from the effects of PIS and oxygenated fuels in comparison with diesel. The oxygenated fuels enhance the oxidation reactivity of soot emission to be faster than to the diesel. The nanostructure of soot formation generated from oxygenated fuel showed disorder shape in graphen layers of soot emissions in comparison with diesel. Furthermore, the internal structure of soot emission indicated that more space between graphen layers and hollow in case of oxygenated fuels which result in easier oxidation compared to the diesel. For all fuels, B16 presented attractive results in reduction NOX and soot characteristics for both size and nanostructure compared to the other fuels. © 2025, Semarak Ilmu Publishing. All rights reserved.
الكلمات المفتاحية: NOX emissions oxidation oxygenated fuel Post-injection soot
Mohammad A.T.; Hatem F.A.; Hassoni S.M.; Hanon M.M.; Abed A.M.
IOP Conference Series: Earth and Environmental Science , Vol. 1507 (1)
1 استشهاد Conference paper Open Access English ISSN: 17551307
Middle Technical University (MTU), Baquba Technical Institute, Baghdad, Iraq; Ministry of Education-Directorate of education of Diyala, Diyala, 32100, Iraq; Middle Technical University (MTU), Institute of Technology - Baghdad, Baghdad, Iraq; Mechanical power Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq
By examining the effect of ambient temperature on photovoltaic (PV) module performance in Diyala Governorate, Iraq, this research intends to optimise solar energy utilisation in the region, contributing to a more sustainable future by dropping reliance on fossil fuels. The study precisely highlights that ambient temperature has a noteworthy negative influence on PV module performance. Particularly, an increase in the temperature of the PV module leads to energy losses due to a reduction in the generated voltage. In this research, a set of experiments was accomplished to appraise the outdoor performance of a polycrystalline PV module under the actual conditions of Diyala Governorate. The energy losses of the PV module are detailed and thoroughly analysed. The findings of this research indicate that the output power and average efficiency of the PV module in summer were found to be 130.8 W and 13.6%, respectively, in a comparison to 126.5 W and 14.1% in winter. This agrees to a maximum performance ratio of 82.5% in summer at 3:00 pm and 84% in winter at 9:00 am. © Published under licence by IOP Publishing Ltd.
الكلمات المفتاحية: Energy losses Maximum power Photovoltaic Solar energy
Togun H.; Basem A.; Jweeg M.J.; Anqi A.E.; Abed A.M.; Mohammed H.I.; Alshamkhani M.T.; Sharma B.K.; Rashid F.L.; Abdulrazzaq T.
Journal of Thermal Analysis and Calorimetry , Vol. 150 (21), pp. 17101-17131
1 استشهاد Article English ISSN: 13886150
Thi-Qar Technical College, Southern Technical University, Basrah, Iraq; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; College of Technical Engineering, Al-Farahidi University, Baghdad, Iraq; Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq; Fuel and Energy Engineering Department, Basrah Engineering Technical College, Southern Technical University, Basrah, Iraq; Department of Mathematics, Birla Institute of Technology and Science, Pilani, India; Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq; Department of Chemical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; College of Engineering, Al-Ayen Iraqi University, An Nasiriyah, 64001, Iraq
The aim of this research is to present an in-depth and comparative analysis of both established and new waste heat recovery (WHR) methods in order to determine practical methods for improving industrial processes’ sustainability and energy efficiency. In manufacturing sectors like cement, steel, and chemical manufacturing, the study assesses important WHR techniques using a systematic analytical approach, such as heat exchangers, organic Rankine cycles (ORCs), thermoelectric generators (TEGs), and phase-change materials (PCMs). The research is innovative because it identifies gaps in the scaling and policies of existing systems while integrating contemporary developments like hybrid designs, nanotechnology-enhanced systems, and data-driven optimization strategies. The results demonstrate that properly installed WHR systems may significantly decrease carbon emissions and industrial energy use by 20–30%. Widespread adoption is nevertheless constrained by obstacles such as high upfront costs, problems with system integration, and upkeep needs. In order to fully realize the promise of WHR technologies across a range of industrial applications, the study provides a roadmap for future development and research, highlighting the necessity of interdisciplinary collaboration and supporting government. © Akadémiai Kiadó Zrt 2025.
الكلمات المفتاحية: Circular economy Energy efficiency Greenhouse gas emissions Hybrid recovery systems Organic Rankine cycle (ORC) Thermoelectric generators (TEGs)
Abed A.M.; Mukhtar A.; Madaminov S.; Azamatov A.; Abduvokhidov A.; Sharifpur M.
Journal of Thermal Analysis and Calorimetry , Vol. 150 (16), pp. 12865-12894
1 استشهاد Article Open Access English ISSN: 13886150
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Institute of Sustainable Energy, Universiti Tenaga Nasional, Putrajaya Campus, Jalan IKRAM-UNITEN, Kajang, 43000, Malaysia; Urgench State University, Kh. Alimdjan Str. 14, Urgench, 220100, Uzbekistan; Mamun University, Bolkhovuz Street 2, Khiva, 220900, Uzbekistan; New Uzbekistan University, Movarounnahr Street 1, Tashkent, 100000, Uzbekistan; Andijan State University, Universitet Str. 129, Andijan, 170100, Uzbekistan; School of Mechanical, Industrial and Aeronautical Engineering, University of the Witwatersrand, Private Bag 3, Wits, 2050, South Africa; ENET Centre, CEET, VSB-Technical University of Ostrava, Ostrava, 708 00, Czech Republic; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
The imperative for efficient energy utilization necessitates advancements in heat exchanger technology, yet accurately predicting the performance of novel designs remains a significant challenge. This study addresses this by developing and validating a high-fidelity computational fluid dynamics (CFD) model for a novel heat exchanger, hereafter referred to as the asymmetric truncated airfoil fin (ATAF) heat exchanger, which features a unique internal fin configuration. A three-dimensional model was created in ANSYS Fluent using the standard k–ω turbulence model, with the computational domain discretized into 1.86 million elements. The model was rigorously validated against experimental data, demonstrating excellent predictive accuracy, with the arithmetic mean of the agreement for six key performance metrics calculated to be 98.3%. Results indicate that the ATAF design achieves a 12.97% higher heat transfer rate compared to the best-performing conventional alternative (a channel with transverse fins), with heat transfer enhancement factors of 2.25–3.42 relative to a smooth channel. A key finding of this study is the quantitative deconstruction of the enhancement mechanisms, which reveals that the dominant contribution (66.1%) arises not from a simple increase in surface area (31.8%), but from specific, flow-modifying phenomena, including boundary layer disruption (24.5%), secondary flow generation (18.7%), and vortex formation (15.3%). System-level projections for various applications indicated substantial benefits, including a 7.3–9.8% improvement in overall thermal efficiency and a 16.2–21.3% reduction in the required heat transfer area. These advantages translate into economically viable payback periods of 1.7–2.5 years, justifying the modest 7.9–9.5% increase in capital costs. © The Author(s) 2025.
الكلمات المفتاحية: Computational fluid dynamics Heat exchanger Heat transfer enhancement Internal fins Thermal efficiency
Wang R.; Abed A.M.; Deng J.; Singh Chauhan B.; Shawabkeh A.; Moria H.; Ayed H.; Mouldi A.
Energy , Vol. 338
Article English ISSN: 03605442
School of Automotive and Transportation, Jiangsu University of Technology, Jiangsu, Changzhou, 213001, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Economics, Faculty of Social Science, Lingnan University, Hongkong, China; Department of Mechanical Engineering, GLA University, UP, Mathura, India; College of Engineering and Technology, American University of the Middle East, Kuwait; Department of Mechanical Engineering, Yanbu Industrial College, Yanbu Al-Sinaiyah City, 41912, Saudi Arabia; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia
Integrating LCES-Systems (liquid CO2 energy storage) with fossil energy-driven facilities could enhance grid stability, improves plant efficiency, and reduces carbon emissions by storing excess energy for use during peak demand. Further research is needed on the technical feasibility, economic viability, and optimal integration of LCES-Systems with fossil energy-driven facilities, particularly regarding GLPs (gas liquefaction processes), heat management, and overall system efficiency. The paper introduces an innovative energy facility under the integrating fossil energy-driven facility with LCES-System that facilitates the provision of electricity, thermal energy, and cooling, while also assisting in peak load regulation. To enhance the power during peak periods an ejector-based refrigeration system was integrated through the integration of inherent heat sources, alongside the utilization of a refrigeration-process to transform compression energy within the facility into cooling capacity. The impact of a GLP (here, Collins cycle) on the efficacy is examined. Additionally, operation assessment metrics for the integrated energy facility are introduced, followed by comprehensive analyses encompassing thermodynamics and financial factors. From the outcomes, the hybrid Grey Wolf Optimizer–Bat Algorithm could enhance energy efficiency by approximately 5.6 % points, reduce the payback period by roughly 0.4 years, and improve the ROI (Rate of return on investment) by over 3.5 %. © 2025
الكلمات المفتاحية: Collins cycle Fossil fuel-driven plant Hybrid grey wolf Optimizer–Bat algorithm Integrated energy facility Liquid CO<sub>2</sub> energy storage Techno-economic
Abed A.M.; Escorcia Y.C.; Atamurotov F.; Ibrahim W.
International Journal of Low-Carbon Technologies , Vol. 20, pp. 269-278
Article Open Access English ISSN: 17481317
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Grupo de Investigación GIOPEN, Energy Department, Universidad de la Costa (CUC), Barranquilla, Colombia; Department of Physics, Urgench State University, Kh. Alimdjan str. 14, Urgench, 220100, Uzbekistan; Faculty of Pedagogy, Shahrisabz State Pedagogical Institute, Shahrisabz, Uzbekistan; Department of Mathematics, University of Tashkent for Applied Sciences, Str. Gavhar 1, Tashkent, 100149, Uzbekistan; Department of Mathematics, Ambo University, Ambo, Ethiopia
This study examines the use of computational fluid dynamics to analyze and simulate the 3D modeling of a solar desalination plant with a single slope design. It aims to optimize large-scale desalination by investigating factors like glass cover angle and fin placement. Results show that a 15◦ glass cover produced the most freshwater (0.2957 kg/m2·h), while a 60◦ angle decreased production by 8.63%. Adding fins increased freshwater production by 53.32% and improved heat transfer efficiency. These findings contribute to developing an optimized solar desalination model to enhance efficiency, reduce energy consumption, and lower carbon emissions. © The Author(s) 2024.
الكلمات المفتاحية: computational fluid dynamics desalination fresh water low-carbon emission numerical modeling optimal orientation renewable energy
Jing D.; Abed A.; Patel P.; Arunkumar D.T.; Aulakh D.; Salah B.; Mahariq I.
International Journal of Hydrogen Energy , Vol. 120, pp. 601
Erratum Open Access English ISSN: 03603199
Xining University, Shaanxi, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, 51001, Hillah, Babylon, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Marwadi University Research Center, Department of Mechanical Engineering, Faculty of Engineering & Technology, Marwadi University, Gujarat, Rajkot, 360003, India; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Karnataka, Bangalore, India; Centre for Research Impact & Outcome, Chitkara University Institute of Engineering and Technology, Chitkara University, Punjab, Rajpura, 140401, India; Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh, 12372, Saudi Arabia; Department of Mathematics, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Tamil Nadu, Chennai, 602105, India; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; University College, Korea University, Seoul, 02481, South Korea; Applied Science Research Center, Applied Science Private University, Amman, Jordan
The authors would apologise to apply for corrigendum to the international journal of hydrogen energy. The authors declare that the main title of the present study should be as following: “Applying artificial intelligence for forecasting behaviour in a liquefied hydrogen unit, Cost and Efficiency analysis” The authors would like to apologise for any inconvenience caused. © 2025
Irfan D.; Catalan Opulencia M.J.; Jasim S.A.; Salimov O.R.; Mahdi A.B.; Abed A.M.; Sarkar A.
International Journal of Hydrogen Energy , Vol. 162
Erratum English ISSN: 03603199
School of Management, Guangzhou University, Guangzhou, China; College of Business Administration, Ajman University, Ajman, United Arab Emirates; Medical Laboratory Techniques Department, Al-Maarif University College, Al-Anbar-Ramadi, Iraq; Department of Propaedeutics of Orthopedic Dentistry, Tashkent State Dental Institute, 103 Makhtumkuli Street, Tashkent, Uzbekistan; Department of Scientific Affairs, Samarkand State Medical Institute, Amir Temur Street 18, Samarkand, Uzbekistan; Anesthesia Techniques Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Air Conditioning & Refrigeration Engineering Techniques, Al-Mustaqbal University College, Babylon, Iraq; Indian Institute of Science, Karnataka, Bangalore, 560012, India
This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/policies/article-withdrawal). The article has been retracted at the request of the Editor-in-Chief. After publication, the journal was made aware of concerns that several references in the paper benefitted certain authors but were irrelevant to the content of the paper. Additionally, the journal discovered that only A. Sarkar was listed as an author in the original submission, but during revision, Daniyal Irfan, Maria Jade Catalan Opulencia, Saade Abdalkareem Jasim, Odilkhon R. Salimov, Ahmed B. Mahdi, and Azher M. Abed were added to the author list without the editor's approval. This is a clear violation of the journal's policy. The authors did not respond to the editor's request for an explanation within the given timeframe. Attempts to contact Daniyal Irfan, Maria Jade Catalan Opulencia, Saade Abdalkareem Jasim, Odilkhon R. Salimov, Ahmed B. Mahdi, and Azher M. Abed failed, as the email addresses provided were invalid and returned undeliverable messages. As a result, the Editor has concluded that the findings in this article cannot be trusted, and the article must be retracted. The journal apologizes to its readers for any inconvenience this may have caused. © 2025 Hydrogen Energy Publications LLC
Ismael H.S.; Lami M.H.A.; Mahmood A.F.; Alwan I.A.; Mohammed Z.B.; Abed A.M.; Fayad M.A.
Environmental Quality Management , Vol. 35 (2)
Article English ISSN: 10881913
College of Civil Engineering, University of Technology-Iraq, Baghdad, Iraq; Environmental Research Center, University of Technology-Iraq, Baghdad, Iraq; College of Mechanical Engineering, University of Technology-Iraq, Baghdad, Iraq; College of Oil and Gas Engineering Department, University of Technology-Iraq, Baghdad, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hilla, Iraq; Energy and Renewable Energies Technology Center, University of Technology- Iraq, Baghdad, Iraq
Mechanistic understanding of the nitrogen cycle in natural freshwater systems, such as the Euphrates River, is critical for sustaining ecosystem services and environmental protection. A model framework of the biogeochemical processes of nitrogen dynamics has the potential to analyze system performance and could highlight the most effective solutions for water quality pollution. The dynamics of mineral nitrogen, including ammoniacal N (NH4++NH3), oxidized N (NO2−+NO3−) and total mineral N (TIN) in the Euphrates River within Karbala city in Iraq, are investigated between April 2018 and September 2019. In this study, a system dynamics model is developed to examine the dynamics of mineral N and explore new insights for mitigation strategies. Findings obtained from this research indicate the ability of the system model to reproduce field observations reasonably. The root mean squared error (RMSE) value for the modeled and observed total ammoniacal N is 0.619 g N m−3, which reflects a best fitted description for the steady state concentration. A higher RMSE value observed for total oxidized N (3.591 g N m−3) could be attributed to the higher nitrifying capacity of the system than model predictions. Field observations and model predictions confirm that the NO3− is the predominant N form in the Euphrates River (2.64 ± 1.54 g m−3), suggesting the important role of metabolic pathways in N cycling in the river system. These findings are also supported by the changes in the hydraulic water budget and physicochemical responses. Research outcomes highlight the modeling framework as an important approach to improving knowledge of N dynamics, system analysis, and helping decision-making to explore best management practices in the Euphrates River. © 2025 Wiley Periodicals LLC.
الكلمات المفتاحية: dynamics modeling Euphrates River nitrogen water quality
Anggraini S.D.; Abed A.M.; Hadi Z.R.
Springer Proceedings in Earth and Environmental Sciences , Vol. Part F666, pp. 509-521
Book chapter English ISSN: 2524342X
Universitas PGRI Ronggolawe Tuban, Tuban, Indonesia; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Najaf Health Directorate, Al-Hakim General Hospital, Najaf, Iraq
This paper aimed to examine how algal biomass can be used to produce biofuels as a sustainable and renewable energy source. There are significant environmental and resource challenges related to algal biofuel production, as algae can thrive on non-arable land and utilise wastewater instead of freshwater. This study highlighted algae for their high lipid content and superior photosynthetic efficiency, making them highly suitable for biofuel production. It also analysed the technical and economic challenges, such as high production costs and energy-intensive processes, to assess the scalability and sustainability of algal biofuels. Several solutions were proposed, including genetic engineering, cost-effective lipid extraction methods, and the integration of algae cultivation with wastewater treatment and CO2 capture. According to this study, algal biofuels could play a significant role in combating climate change, reducing fossil fuel dependency and achieving a more sustainable global energy future. Realising this potential requires technological innovation, collaborative efforts and supportive policies. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2025.
الكلمات المفتاحية: Algal Biofuels Climate Change Mitigation Lipid Content Scalability and Sustainability Sustainable Energy
Zhou Y.; Chen J.; Abed A.M.; Chauhan B.S.; Salah B.; Praveenkumar S.; Liu Q.
International Journal of Hydrogen Energy , Vol. 167
Article English ISSN: 03603199
School of Business, Nanjing University, Jiangsu, Nanjing, 210008, China; College of Innovation and Entrepreneurship, Jiangsu Maritime Institute, Jiangsu, 211170, China; School of Marxism, Nanjing University of Aeronautics and Astronautics, Jiangsu, Nanjing, 211106, China; Jiangsu Maritime Institute, Jiangsu, 211170, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, UP, Mathura, India; Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, 12372, Saudi Arabia; Department of Nuclear and Renewable Energy Sources, Ural Federal University, Yekaterinburg, 620002, Russian Federation; Business School, Middlesex University, United Kingdom
Ensuring the economic viability of energy systems is essential for meeting the rising demand for affordable and sustainable energy solutions. This study explores a multi-generation system designed to produce hydrogen, electricity, and freshwater by combining biogas utilization, power generation, and water purification processes. A comprehensive evaluation is conducted using a 5E framework, which examines energy performance, environmental impact, and cost efficiency. Optimization methods are applied to improve the system's overall output and cost-effectiveness. Results show that the system generates hydrogen, power, and freshwater at rates of 0.1954 kg/s, 2171 kW, and 0.9662 kg/s, respectively. The system achieves efficiency levels of 50.91 % and 56.1 %, with a production cost of 293$/GJ. Environmental analysis highlights a penalty cost rate of 13.02$/h, underscoring the system's balance between economic and environmental performance. This research demonstrates the potential of integrating biogas into multi-purpose energy systems to achieve sustainable and cost-effective energy production. © 2025 Hydrogen Energy Publications LLC
الكلمات المفتاحية: Biogas Environmental optimization Exergoeconomic analysis Hydrogen production S-graze cycle
Ismaeel A.A.; Hussein N.F.; Fayad M.A.; Abed A.M.; Chaichan M.T.
International Journal of Energy Production and Management , Vol. 10 (1), pp. 43-50
Article Open Access English ISSN: 20563272
Electromechanical Engineering Department, University of Technology, Baghdad, 10066, Iraq; Energy and Renewable Energies Technology Center, University of Technology, Baghdad, 10066, Iraq; Department of Air Conditioning and Refrigeration, AL-Mustaqbal University College, Babylon, 51001, Iraq
Particulate matter, such as dust, soot, and dirt, are moved by wind and other air movements and accumulated on top of the PV panel surface, excluding solar penetration and hence affecting the extent of power produced. Six levels of dirt density were prepared for this experiment to evaluate the effects of dust and soot on PV efficiency in the Al-Doura district, Baghdad, where emissions from power plants and oil refineries are higher than a district located 10 km away in terms of University of Technology, Baghdad, Iraq. The research showed that soot and dust accumulation on the panels reduced the flow of sunlight and intensified hot spots, thereby reducing the power generation efficiency. Dust alone reduces efficiency by up to 48%, while soot by 54%. The greater soot is ascribed to its deposit, which increases panel temperatures more than dust does. The effect of deposition density on temperature rise was proportional, to be exact, 0.54℃ to 2℃ increase per dirty deposit. ©2025 The authors.
الكلمات المفتاحية: dust electrical efficiency photovoltaic modules solar thermal performance soot particles
Cardoso L.; Abed A.M.
Springer Proceedings in Earth and Environmental Sciences , Vol. Part F666, pp. 522-533
Book chapter English ISSN: 2524342X
Polytechnic Institute of Portalegre and Centre for Comparative Studies of the University of Lisbon, Lisbon, Portugal; Mechanical Power Technical Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Babylon, Iraq
To address pressing challenges such as climate change, environmental degradation and energy security, the global transition to renewable energy has become essential. This study presented an analysis of the factors affecting renewable energy consumption in nations classified by the Human Development Index (HDI). A Bayesian Model Averaging approach, along with panel econometrics, was used to study how economic, environmental and technological factors influence the adoption of renewable energy. A higher HDI is largely determined by environmental and technological factors, while a lower HDI is constrained by infrastructure and economic limitations. Several factors, including CO2 emissions, policy frameworks and energy security concerns, influence energy prices. To accelerate renewable energy deployment and achieve sustainability goals, tailored regional strategies and international collaboration are crucial. This study analysed global trends and policies to provide actionable insights for policymakers and investors, helping optimise renewable energy strategies and align them with climate policies. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2025.
الكلمات المفتاحية: Bayesian Model Averaging Climate Change Mitigation Policy Frameworks Renewable Energy Consumption Sustainable Development
Oveysikian A.; Abed A.M.; Davatgar S.; Mosallaei B.; Basem A.; Habib Ali S.; Ahmed M.
International Journal of Hydrogen Energy , Vol. 135, pp. 457-476
Article English ISSN: 03603199
Faculty of Electrical and Computer Engineering, Tarbiat Modares University, Tehran, Iran; Mechanical Power Technical Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Hilla, Babylon, 51001, Iraq; Department of Electrical Engineering, Islamic Azad University, Ahvaz Branch, Ahvaz, Iran; The Klipsch School of Electrical and Computer Engineering, New Mexico State University, Las Cruces, 88003, NM, United States; Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Dep. of Electrical Engineering Techniques, Al-Amarah University College, Maysan, Iraq; Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Eastern Province, Dammam, 31441, Saudi Arabia
Rising hydrogenous renewable energy and distributed storage integration in hybrid AC-DC networks present new challenges to grid reliability and security. Existing detection methods struggle with the complex dynamics of these systems, particularly when faced with sophisticated cyber threats. Voltage attacks, capable of causing widespread outages and equipment damage, are a significant threat. This paper proposes a novel deep reinforcement learning (DRL) approach using Ornstein-Uhlenbeck noise for enhanced voltage attack detection. Our approach addresses the limitations of conventional detection methods that suffer from low accuracy and poor convergence in complex hybrid environments. The Noisy Deep Q-Network (NDQN) leverages this noise exploration technique to achieve efficient state space exploration and smoother convergence during training. An advanced attack model specifically designed to target vulnerabilities in stored hydrogen fuel-based AC-DC systems based on hydrogen fuel resources is also presented. The NDQN approach's effectiveness is evaluated in a realistic and complex hybrid AC-DC environment under the proposed attack model. The results demonstrate significant improvements in detection accuracy (62.44 % higher average return compared to traditional DQN) and robustness compared to existing methods. Additionally, the approach helped maintain system integrity while reducing generation from the electrical grid by 42.7 %, leading to substantial cost savings. This work showcases the combined efficacy of the novel attack model and the NDQN approach, offering a promising solution for bolstering power grid security and reliability. © 2025 Hydrogen Energy Publications LLC
الكلمات المفتاحية: Deep reinforcement learning Energy management Hybrid network Hydrogen storage Stored hydrogen renewable energy sources
Abed A.M.; Azizi H.R.; Smaisim G.F.; Ataei E.; Bhogayatay A.
Energy Exploration and Exploitation
Article Open Access English ISSN: 01445987
Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Accounting, Ard.C., Islamic Azad University, Ardebil, Iran; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Najaf, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Najaf, Iraq; Department of Industrial Engineering, Payame Noor University, Tehran, Iran; Department of Mechanics, Kabul University, Kabul, Afghanistan
This research presents a new method to reduce the environmental impact of reverse osmosis (RO) systems in solar farms. The concept involves enhancing the connection between water, energy, and the environment by utilizing an RO system that is powered by an organic Rankine cycle (ORC), which produces electricity using heat from a solar field. The study examines various ORC setups and operating fluids based on energy analysis (1E), exergy (2E), economic (3E), and environmental effects (4E) to create clean water. Important aspects of the optimization process include selecting the ORC setup, picking the working fluid for the ORC, and establishing the design parameters for the solar parabolic farm. These parameters are fine-tuned using a genetic algorithm technique. The findings show a 12% decrease in environmental impact and a 7.5% improvement in exergy efficiency due to this three-objective optimization strategy. © The Author(s) 2025. This article is distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 License (https://creativecommons.org/licenses/by-nc/4.0/) which permits non-commercial use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access page (https://us.sagepub.com/en-us/nam/open-access-at-sage).
الكلمات المفتاحية: 4E analyses desalination system environmental relevance optimization reverse osmosis
Jing D.; Abed A.; Patel P.; Arunkumar D.T.; Aulakh D.; Salah B.; Mahariq I.
International Journal of Hydrogen Energy , Vol. 143, pp. 1
Erratum English ISSN: 03603199
Xijing University, Shaanxi, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hillah, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Marwadi University Research Center, Department of Mechanical Engineering, Faculty of Engineering & Technology, Marwadi University, Gujarat, Rajkot, 360003, India; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Karnataka, Bangalore, India; Centre for Research Impact & Outcome, Chitkara University Institute of Engineering and Technology, Chitkara University, Punjab, Rajpura, 140401, India; Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh, 12372, Saudi Arabia; Department of Mathematics, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Tamil Nadu, Chennai, 602105, India; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; University College, Korea University, Seoul, 02481, South Korea; Applied Science Research Center, Applied Science Private University, Amman, Jordan
The authors regret the misspelling of the author affiliation ‘Xijing University, Xi'an, Shaanxi, 710123, China’ in the original article and corrigendum. This has now been corrected in the above authorship listing. The authors would like to apologise for any inconvenience caused. © 2025
Deghoum K.; Al-Tamimi A.N.J.; Gherbi M.T.; Mohammed M.N.; Abed A.M.; Abdullah O.I.; Boukhari A.; Hamidatou S.
AIP Conference Proceedings , Vol. 3211 (1)
Conference paper English ISSN: 0094243X
University of El Oued, UDERZA Laboratory, El Oued, 39000, Algeria; Department of Mechanical Engineering, University of El Oued, El Oued, Algiers, 39000, Algeria; College of Technical Engineering, Al-Farahidi University, Baghdad, Iraq; Mechanical Engineering Department, College of Engineering, Gulf University, Sanad, 26489, Bahrain; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Baghad, Iraq; Energy Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq; Hamburg University of Technology (TUHH), Institute of Laser and Systems Technologies (iLAS), Harburger Schloßstraße 28, Hamburg, 21079, Germany; Energy and Mechanical Engineering Laboratory (LEMI), University of Boumerdes, Algiers, Algeria
The wind turbine system relies heavily on its blades, which are crucial components. Modern wind turbine blades are constructed using composite materials to achieve a balance between high stiffness and low weight. This research paper aimed to enhance the structure of a 5-kW small HAWT by developing a new three-dimension finite element model. The study involved the optimization of the blade structure using four different composite materials [Carbon fiber-reinforced plastic (CFRP), Glass Fiber Reinforced Polymer (GFRP), poly-para-phenylene terephthalamide (Kevlar), and high-performance glass fiber (S-glass)] to improve and give the suitable material for the blade. The research presented the blade's modal shapes and maximum deflection when using each material, with all calculations conducted under a wind speed of 10 m/s. The findings revealed that the S-glass material resulted in the largest deflection (8.22 mm), while the CFRP material exhibited the lowest deflection (2.01 mm). Additionally, the modal analysis of the first six natural frequencies indicated that the blade made from CFRP material possessed the highest natural frequency, followed by Kevlar material and GFRP material. Conversely, the blade made from S-glass material had the lowest natural frequency. © 2025 Author(s).
الكلمات المفتاحية: composite materials deflection frequency mode shape wind turbine
Abdullah O.I.; Hamzah A.A.; Adnan A.Q.; Al-Tamimi A.N.J.; Mohammed M.N.; Abed A.M.
AIP Conference Proceedings , Vol. 3211 (1)
Conference paper English ISSN: 0094243X
Department of Energy Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Mechanical Engineering Department, College of Engineering, Gulf University, Sanad, Bahrain; Hamburg University of Technology (TUHH), Institute of Laser and Systems Technologies (iLAS), Harburger Schloßstraße 28, Hamburg, 21079, Germany; College of Technical Engineering, Al-Farahidi University, Baghdad, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Baghdad, Iraq
In order to improve the effectiveness, increase the life cycle, and avoid the blade structural failure of wind turbines, the blades need to be perfectly designed. Knowing the flow angle and the geometric characteristics of the blade is necessary to calculate the values of the induction factors (axial and tangential), which are the basis of the Blade Element Momentum theory (BEM). The aforementioned equations form an implicit and nonlinear system. Consequently, a straightforward iterative solution process can be used to solve this problem. A theoretical study of the aerodynamic performance of a horizontal-axis wind turbine blade was introduced using the BEM. The main objective of the current work is to examine the wind turbine blade's performance under specific initial and boundary conditions. In this study, NACA 4415 airfoils were selected to do this investigation. The turbine blades were divided into small segments to calculate the forces acting upon each segment to assess their impact on the final wind turbine blade design. An extensive and critical analysis of the chosen wind turbine was performed, including lift, drag, shear force, and bending moment calculations. Based on the computations, the values of total thrust force, torque, and power generation values for the optimal wind turbine were 3755.9 N, 1834 Nm, and 30.122 kW, respectively. Furthermore, a significant finding emerges from the analysis, indicating that the largest difference in power occurs at r/R=0.8, amounting to 5.5239 kW. The new Matlab code was validated. The key contribution of this study lies in enhancing turbine efficiency and reducing fatigue losses through optimizing wind turbine blade design to obtain the highest efficiency level. The outcomes demonstrate that the newly implemented MATLAB code exhibits exceptional accuracy in assessing aerodynamic performance, enabling efficient wind turbine blade design optimization. © 2025 Author(s).
الكلمات المفتاحية: aerodynamic characteristics Blade Element Momentum theory horizontal axis wind turbine wind energy
2024
79 بحث
Togun H.; Sultan Aljibori H.S.; Abed A.M.; Biswas N.; Alshamkhani M.T.; Niyas H.; Mohammed H.I.; Rashid F.L.; dhabab J.M.; Paul D.
International Journal of Hydrogen Energy , Vol. 89, pp. 22-47
85 استشهاد Review English ISSN: 03603199
Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbalaa, 56001, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India; Fuel and Energy Engineering Department, Basrah Engineering Technical College, Southern Technical University, Basrah, Iraq; Energy Institute Bengaluru, Centre of Rajiv Gandhi Institute of Petroleum Technology, Karnataka, Bengaluru, India; Department of Cooling and Air Conditioning Engineering, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq; Department of Petroleum Engineering, Engineering College, University of Kerbala, Karbala, 56001, Iraq; Alnukhba University College, Baghdad, Iraq
Fuel cell hybrid electric vehicles (FCHEVs) are gaining recognition as a pivotal innovation in the quest for sustainable transportation, seamlessly blending the advantages of fuel cells with electric vehicle technology. As global initiatives to curtail greenhouse gas emissions and mitigate climate change gain momentum, FCHEVs offer a promising alternative to conventional internal combustion engine vehicles and battery electric vehicles (BEVs). This review aims to examine recent technological progress in enhancing FCHEV fuel efficiency and performance, focusing particularly on cost reduction, long-distance operational capabilities, and the incorporation of intelligent autonomous systems. A key innovation highlighted in this study is the exploration of cost-effective hydrogen storage techniques, including metal hydrides and chemical storage solutions, which have demonstrated potential to significantly increase storage capacity and reduce refueling times. Furthermore, advancements in energy management, particularly the integration of ultracapacitors and high-capacity batteries, offer new avenues for extending vehicle range and boosting overall efficiency. The emergence of autonomous FCHEVs represents another major leap forward, setting the stage for more efficient, self-driving vehicles in the near future. However, persistent challenges remain, including reducing hydrogen production costs, improving fuel cell durability, and developing a widespread hydrogen infrastructure. Addressing these issues will require ongoing innovation in fuel cell materials, hydrogen storage systems, and energy management strategies. This review underscores the transformative role FCHEVs can play in reducing emissions and enhancing energy efficiency in the transport sector. Collaboration between industry, researchers, and policymakers will be vital to unlocking the full potential of FCHEVs in creating a more sustainable future. © 2024 Hydrogen Energy Publications LLC
الكلمات المفتاحية: Energy management system Greenhouse gas emissions Intelligent-based autonomous FCHEVs Long-distance driving Optimization Sustainability
Zhou X.; M Abed A.; Chaturvedi R.; Abdullaeva B.S.; Shawabkeh A.; Fouad Y.; Riaz F.
Case Studies in Thermal Engineering , Vol. 59
55 استشهاد Article Open Access English ISSN: 2214157X
School of Mathematics, Physics and Optoelectronic Engineering, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Mathura, India; Department of Mathematics and Information Technologies, Vice-Rector for Scientific Affairs, Tashkent State Pedagogical University, Tashkent, Uzbekistan; College of Engineering and Technology, American University of the Middle East, Kuwait; Department of Applied Mechanical Engineering, College of Applied Engineering, Muzahimiyah Branch, King Saud University, Saudi Arabia; College of Engineering, Abu Dhabi University, Abu Dhabi, United Arab Emirates
This study introduces an innovative thermal management system tailored for cylindrical Lithium-ion batteries. It integrates a tubular thermoelectric generator (TTEG) to handle both battery thermal management and the utilization of waste heat for power generation. The main focus lies in evaluating the waste heat recovery capabilities of the TTEG to enhance effective thermal management. The research investigates key geometric and operational parameters such as battery discharge rate (C-rate), thermocouple count (NTC), heat transfer coefficient (HTC), and thermoelectric leg height (HL) to comprehensively assess the overall system performance. The results highlight that integrating the TTEG improves thermal management and waste heat recovery in lithium-ion batteries. It demonstrates temperature reductions of up to 21 °C at a discharge rate of 3C compared to batteries without the TTEG thermal management system. Additionally, increasing the NTC leads to a rise in the maximum battery temperature, thereby enhancing waste heat recovery performance. For instance, increasing the number of thermocouples from 100 to 144 results in a substantial up to 70 % increase in TTEG voltage.Furthermore, enhancing HTC and HL positively impacts thermal performance, showing a significant decrease in the maximum battery temperature. Elevated HTC and HL also contribute to improving thermoelectric voltage, power, and conversion efficiency, highlighting their dual role in enhancing waste heat recovery. For instance, at peak conditions, there is a notable reduction of 2.66 °C in the maximum battery temperature with an HL of 12 mm compared to 4 mm. Additionally, increasing HTC from 10 to 20, particularly at maximum discharge, leads to a surge of 15.87 % in voltage and a substantial 34.28 % increase in output power. © 2024 The Authors
الكلمات المفتاحية: Battery thermal management Cylindrical lithium-ion battery Tubular thermoelectric generator Waste heat recovery
Elamy M.I.; Essa F.A.; Basem A.; Mohammed S.A.; Alawee W.H.; Abdullah A.S.; Abed A.M.; Omara Z.M.; Farouk W.M.
Desalination , Vol. 585
54 استشهاد Article English ISSN: 00119164
Industrial Engineering Department, College of Engineering, Northern Border University, Arar, Saudi Arabia; Department of Production Engineering and Mechanical Design, Faculty of Engineering, Menoufia University, Shebin El-Kom, Egypt; Mechanical Engineering Department, Faculty of Engineering, Kafrelsheikh University, Kafrelsheikh, 33516, Egypt; Air Conditioning Engineering Department, Faculty of Engineering, Warith Al-Anbiyaa University, Iraq; Energy and Renewable Energies Technology Research Center, University of Technology, Iraq; Control and Systems Engineering Department, University of Technology, Baghdad, Iraq; Department of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Mechanical Power Engineering Department, Faculty of Engineering, Tanta University, Tanta, 31521, Egypt; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Mechanical Engineering Department, Faculty of Engineering, Benha University, Benha, Egypt
The world faces a growing water crisis due to a booming population and dwindling freshwater reserves. This study explores innovative approaches to solar desalination by introducing a novel cylindrical solar still (CYSS) design and integrating technologies such as cylindrical absorber (MCYSS), MCYSS with parabolic solar concentrator (PSC), external condensers, and silver nanomaterial-based phase change material (PCM). Experimental results revealed that the yield of MCYSS was ameliorated by 195 % as compared to that of the CSS. Moreover, the increase in distillate production for the modified CYSS with parabolic solar concentrator (MPCYSS) is 245 % higher than that of the conventional CSS. In addition, the productivity attains 2900 and 11,600 mL/m2/day for the CSS and the MPCYSS with fan (external condensation), severally. Consequently, the increase in output for the MPCYSS is 300 % higher than that of the CSS. While MPCYSS-PCM achieves a remarkable daily yield of 11,800 mL/m2, exceeding the CSS's output of 3050 mL/m2 by an impressive 287 %. The best case of operation was obtained for the MPCYSS with fan, where the efficiency and water cost were 72.4 % and $0.0147 per liter. Moreover, the annual CO2 emissions associated with the two primary configurations: MCYSS + PSC + Fan and MCYSS + PSC + PCM are estimated to be 31.9 tons and 30.8 tons per year, respectively. Also, the enviroeconomic parameters, with values of 462.5 and 446.6 per year for the MCYSS + PSC + Fan and MCYSS + PSC + PCM configurations, respectively. © 2024 Elsevier B.V.
الكلمات المفتاحية: Cylindrical absorber Cylindrical solar still External condenser Nanomaterial-based phase change material Parabolic solar concentrator
Bouzgarrou S.; Abed A.M.; Chauhan B.S.; Alsenani T.R.; Alharbi F.S.; Alkhalaf S.; Albaijan I.; Sayfutdinovna Abdullaeva B.; Deifalla A.
Case Studies in Thermal Engineering , Vol. 53
33 استشهاد Article Open Access English ISSN: 2214157X
Department of Civil Engineering, College of Engineering, Jazan University, Jazan, P.O. Box. 706, Jazan, 45142, Saudi Arabia; Higher Institute of Applied Sciences and Technology of Sousse, Sousse University, Tunisia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, UP, Mathura, India; Department of Electrical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Mechanical Engineering, College of Engineering, University of Hafr Al Batin, P.O. Box 1803, Hafr Al Batin, 39524, Saudi Arabia; Department of Computer, College of Science and Arts in Ar Rass, Qassim University, Qassim, Ar Rass, Saudi Arabia; Mechanical Engineering Department, College of Engineering at Al-Kharj, Prince Sattam Bin Abdulaziz University, Al Kharj, 16273, Saudi Arabia; Department of Mathematics and Information Technologies, Faculty of Mathematics and Physics, Vice-Rector for Scientific Affairs, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Department of Structural Engineering and Construction Management, Future University in Egypt, New Cairo City, 11835, Egypt
In order to achieve a sustainable energy future, it is of utmost importance to harness solar energy for the production of liquid hydrogen. This undertaking is justified by the significant role that liquid hydrogen plays as a clean and highly efficient fuel source, effectively addressing the pressing concerns regarding greenhouse gas emissions and reducing reliance on conventional fossil fuels. An additional advantage lies in the easy storage and transportation capabilities of liquid hydrogen, making it a viable solution for energy storage across diverse sectors. In this regard, the current research presents a novel solar-powered setup consisting of parabolic trough solar collectors (PTSCs), a sequential organic Rankine cycle (ORC), a liquefied natural gas (LNG) regasification unit, and a module dedicated to the production and subsequent liquefaction of hydrogen. A meticulously crafted MATLAB code is utilized to replicate the operations of the proposed system, facilitating a thorough examination of its energy, exergy, environmental, and economic performance. The proposed system exhibits a net output power of 1.13 MW and possesses the capacity to produce hydrogen at a rate of 34.92 kg/h, featuring a levelized cost of hydrogen (LCOH) of 3.59 $/kg. Additionally, the system encompasses a cooling capability of 192 kW. From an environmental perspective, this configuration contributes to a decrease in carbon dioxide emissions by 255.96 kg/h. After conducting a dynamic analysis with meteorological data, it was determined that the system has the potential to generate an annual hydrogen output of 536.84 tons in San Francisco. © 2023 The Authors
الكلمات المفتاحية: Economic analysis Energy efficiency Environmental Protection Hydrogen Liquefaction cycle Solar power generation
Ben Khedher N.; Hosseinzadeh K.; Abed A.M.; Khosravi K.; Mahdi J.M.; Sultan H.S.; Mohammed H.I.; Talebizadehsardari P.
International Communications in Heat and Mass Transfer , Vol. 152
32 استشهاد Article Open Access English ISSN: 07351933
Department of Mechanical Engineering, College of Engineering, University of Ha'il, Saudi Arabia; Laboratory of Thermal and Energetic Systems Studies (LESTE) at the National School of Engineering of Monastir, University of Monastir, Tunisia; Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, street, Troy, 12180, NY, United States; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbalaa, 56001, Iraq; Department Of Cooling And Air Conditioning Engineering, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq; Power Electronics, Machines and Control (PEMC) Research Group, University of Nottingham, Nottingham, United Kingdom
This paper presents a 3D numerical analysis of the melting behaviour of a phase changing material (PCM) in a helix-shaped coil-tube heat exchanger, a critical component in latent heat storage (LHS) systems. The analysis explores the impact of the heat transfer fluid's flow route on the system's performance. Specifically, three unique designs of coiled-tube heat exchangers were assessed: a conventional central return tube with an inlet at the bottom, a central return tube with an inlet at the top, and a conventional coiled-tube. The key performance measures under investigation were the melting time of the PCM, average temperature, and average charge rate. Results revealed the central return tube configurations enhance initial melting rates and charging capacity compared to the conventional coil, with the top inlet design outperforming the bottom inlet by 16.5% in melting rate after 5000 s from the melting initiation. Meanwhile, the configuration with the central return tube at the top demonstrated incremental energy storage increases of 18.8%, 13.1% and 1.9% at operating time intervals of 1000, 5000 and 10,000, respectively, compared to the conventional system. These results underline the benefits of a central return tube with optimized inlet positioning in improving the melting effectiveness in LHS systems. © 2024
الكلمات المفتاحية: Central return tube Coiled tube Melting Numerical simulation Phase change materials
Said M.A.; Togun H.; Abed A.M.; Biswas N.; Mohammed H.I.; Sultan H.S.; Mahdi J.M.; Talebizadehsardari P.
Journal of Building Engineering , Vol. 94
26 استشهاد Article Open Access English ISSN: 23527102
Architectural Engineering Department, University of Ha'il, Ha'il, Saudi Arabia; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India; Department of Cooling and Air Conditioning Engineering, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Power Electronics, Machines and Control (PEMC) Research Group, University of Nottingham, Nottingham, United Kingdom
Efficient thermal energy storage (TES) is crucial for integrating intermittent renewable energy sources and managing fluctuations in energy supply and demand. Among TES methods, latent heat TES (LHTES) using phase change materials (PCMs) is highly promising due to its high energy storage density and nearly isothermal operation during phase transitions. However, the inherently low thermal conductivity of PCMs hinders heat transfer rates, negatively impacting charging and discharging performance. This study investigates novel wavy channel geometries for the PCM container in a triplex-tube LHTES unit to enhance heat transfer and improve solidification rates during the discharge process. A comprehensive computational model based on the enthalpy-porosity method is developed to simulate the PCM (paraffin wax RT35) solidification inside wavy channels with sinusoidal, zigzag, and step-function profiles. The effects of channel geometry, heat transfer fluid (HTF) velocity, and inlet temperature on solidification rate and heat recovery are systematically evaluated. Results demonstrate that the step-function geometry significantly accelerates solidification compared to straight channels, reducing discharge time by 65.1 % and increasing heat recovery rate by 147.9 %. Decreasing waviness width from 15 mm to 5 mm further reduces solidification time by 70.1 %, while increasing waviness height from 5 mm to 15 mm leads to a 74.4 % reduction. Moreover, increasing HTF flow from Re = 250 to 1000 enhances heat recovery by 92.3 %, and lowering inlet temperature from 20 °C to 10 °C improves it by 76.9 %. The findings provide valuable insights for designing efficient LHTES units with wavy channel geometries for renewable energy integration and thermal management applications. © 2024 Elsevier Ltd
الكلمات المفتاحية: Discharge Heat storage rate Phase change material Solidification Wavy channels
Al Arni S.; Mahdi J.M.; Abed A.M.; Hammoodi K.A.; Hasan H.A.; Homod R.Z.; Ben Khedher N.
Journal of Energy Storage , Vol. 103
23 استشهاد Article Open Access English ISSN: 2352152X
Department of Chemical Engineering, University of Ha'il, Ha'il, 81441, Saudi Arabia; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, 51001, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Electromechanical Engineering Department, University of Technology, Baghdad, 10066, Iraq; Department of Studies, Ministry of Higher Education & Scientific Research, Baghdad, 10011, Iraq; Department of Oil and Gas Engineering, Basrah University for Oil and Gas, Basra, 1004, Iraq; Department of Mechanical Engineering, University of Ha'il, Ha'il, 81451, Saudi Arabia
Effective thermal management of photovoltaic (PV) systems is crucial for mitigating temperature-induced efficiency losses and enhancing overall performance. This study proposes a novel approach to address this challenge by employing multi-layer phase change materials (PCMs) with strategically degraded nanoparticle concentrations integrated into photovoltaic-thermal (PVT) systems. The transient heat-transfer dynamics, temperature distributions, and conversion efficiencies were numerically investigated for three configurations: a uniform single-layer nano-PCM, a two-layer nano-PCM with degraded concentrations, and a three-layer nano-PCM with degraded nanoparticle concentrations. Notably, the three-layer degraded configuration consistently outperformed other arrangements, maintaining PV temperatures up to 5 °C lower and electrical efficiencies up to 4 % higher over 100 min of operation. This configuration also achieved the highest thermal efficiency of 0.682, surpassing the single PCM case by 6.7 %. By combining multi-layer PCMs with degraded nanoparticle loadings, the proposed approach enabled more uniform heat distribution within the nano-PCM composite, overcoming the inherent limitation of decreasing thermal interaction between nanoparticles and PCM regions farther from the heat source observed in uniform nano-PCMs. The proposed approach for thermal management can significantly enhance the heat absorption, temperature regulation, and thermoelectric performance of PVT systems under continuous operation scenarios. © 2024 Elsevier Ltd
الكلمات المفتاحية: Nanoparticles Phase change materials Photovoltaic-thermal systems Thermal management
Boujelbene M.; Mahdi J.M.; Abed A.M.; Ghanim M.S.; Hammoodi K.A.; Mohammed H.I.; Togun H.; Talebizadehsardari P.
Journal of Energy Storage , Vol. 79
22 استشهاد Article Open Access English ISSN: 2352152X
Industrial Engineering Department, College of Engineering, University of Ha'il, Ha'il, 81451, Saudi Arabia; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, 51001, Iraq; Environment and Water Directorate, Ministry of Science and Technology, Baghdad, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Department of Physics, College of Education, University of Garmian, Kurdistan, Kalar, 46021, Iraq; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Power Electronics, Machines and Control (PEMC) Research Group, University of Nottingham, Nottingham, United Kingdom
Incorporating PCMs with thermal storage systems offer significant potential for improving the energy efficiency of diverse applications, including solar thermal power plants, air conditioning systems, and building heating and cooling systems. However, a key challenge in designing these systems is achieving efficient and rapid PCM melting during the charging process. This study aims to analyze and report on the potential of arch-shaped fins in enhancing the melting rate and overall performance of horizontal triplex-tube storage systems. The influences of fin base height and fin connecting angles were analyzed via simulations. The optimal arch-shaped fin design reduced melting time by 53 % and improved heat storage rate by 117 % compared to the no-fin case. Specifically, equal inner/outer fin base heights of 10 mm minimized melting time to 14.8 min and maximized heat storage to 477.2 W. Increasing the inner fin connecting angle from 0° to 120° decreased melting time by 15.2 % to 12.1 min and increased heat storage by 18.0 % to 591.3 W. Reducing the outer fin connecting angle from 240° to 0° reduced melting time by 10.8 % to 11.5 min and improved heat storage by 12.3 % to 591.3 W. These findings would have implications for advancing the design and optimization of heat storage systems, leading to improved performance and increased utilization of sustainable energy sources. © 2023 Elsevier Ltd
الكلمات المفتاحية: Enhancement Fins Latent heat Melting Phase change material
Zheng S.; Abed A.M.; Chaturvedi R.; Nutakki T.U.K.; Abdullaev S.; Hu J.; Fouad Y.; Mahariq I.
Process Safety and Environmental Protection , Vol. 190, pp. 495-511
21 استشهاد Article English ISSN: 09575820
School of Economics and Management, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Mathura, India; Department of Chemical Engineering, American University of Ras Al Khaimah, United Arab Emirates; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Department of Science and Innovation, Tashkent State Pedagogical University named after Nizami, Tashkent, Uzbekistan; Department of Applied Mechanical Engineering, College of Applied Engineering, Muzahimiyah Branch, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
The imperative to reduce greenhouse gas emissions has intensified the need for sustainable thermal energy systems. This study addresses this exigency by harnessing solar energy and exploiting waste heat to augment energy efficiency in urban settings. The proposed system integrates a concentrated solar power-based Brayton cycle with dual power generation, water desalination, and hydrogen production capabilities. Comprehensive technical and economic evaluations affirm the feasibility of this system. Additionally, transient codes have been utilized to ascertain the performance of the proposed configuration. The investigation reveals that the tower and receiver are the primary sites of exergy destruction, accounting for 48.1 % of the total, with the heliostat field, reverse osmosis, and proton exchange membrane electrolysis contributing 24 %, 8.8 %, and 6.9 %, respectively. The findings show that increasing the pressure ratio in the Brayton cycle leads to improved exergy efficiency and increased power output, but also leads to higher overall costs. A thorough economic evaluation shows that the solar unit, which includes the receiver, heliostat field, compressor, and gas turbine, is the main factor influencing costs, representing 62.6 % of the total system cost rate. The dynamic study conducted to forecast the annual system capacity in San Francisco indicates that electricity production peaks during summer at 242.15 MWh. Conversely, winter exhibits the lowest contribution at 17.3 % with 143.11 MWh. © 2024 The Institution of Chemical Engineers
الكلمات المفتاحية: Dual-loop power generation cycle Multi-generation system Solar energy Techno-economic analysis Waste heat recovery
Duan P.; Abed A.M.; Chaturvedi R.; Ahmad S.F.; Absalamov T.; Dahari M.; Fouad Y.
Journal of Energy Storage , Vol. 90
18 استشهاد Article English ISSN: 2352152X
School of mechanical engineering, Zhengzhou University of Science and Technology, Zhengzhou, China; College of Mechanical and Electrical Engineering, Henan University of Science and Technology, Louyang, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Mathura, India; Department of Engineering Management, Institute of Business Management, Karachi, Pakistan; Ph.D in Pedagogical Sciences, Department of Information Technology in Mathematics and Education, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Deparment of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; Department of Applied Mechanical Engineering, College of Applied Engineering, King Saud University, Muzahimiyah Branch, P.O. Box 800, Riyadh, 11421, Saudi Arabia
Researchers are exploring innovative solutions for thermal energy storage to address the challenges posed by intermittent renewable sources, enhance energy efficiency, and contribute to the global shift towards cleaner and more sustainable energy practices. In the pursuit of an optimal system to improve the heat release/absorption efficiency of phase change materials (PCMs), a unique shell and tube latent heat storage system with four rectangular fins was designed. The melting and solidification behaviors of the material in this device were examined by manipulating the tube's position within the shell and fins around the tube. Six different cases were considered such as case A (tube in the center of the shell), case B (tube at the top of the shell), case C (tube at the bottom of the shell), case D (tube in the center of the shell with fins on its sides), case E (tube at the top of the shell with fins located in its bottom section), and case F (tube at the bottom of the shell with fins located in its top section). Cases D and E were the best options for absorbing and releasing heat in the shortest time. However, it should be noted that case F was faster during the melting process and dropped behind in the final stages. The authors proposed that if achieving a balanced result without incurring additional costs is essential, case D is a suitable option since it offers reasonable performance in melting and solidification processes. However, suppose researchers and developers of energy storage systems are seeking higher performances where heat absorption and release occur much more rapidly. In that case, it is suggested to construct one of the cases, E or F, and implement a rotational mechanism to enable access to the other case. Based on the outcomes, cases D and F needed 6235 s and 7552 s, respectively, to fully melt. While all cases even required more than 3 h to solidify 80 % of the PCM. The complete melting speed of Case F is 21.12 % faster than that of Case D. Additionally, the time required for 50 % solidification is 14.79 % faster for Case E compared to Case D. During 3 h, this system could absorb 1172 kJ of energy (cases D and F) and release 893 kJ of energy (cases D and E). © 2024 Elsevier Ltd
الكلمات المفتاحية: Clean energy Energy storage Heat absorption efficiency Latent heat storage Melting process Solidification performance
Ben Khedher N.; Togun H.; Aljibori H.S.S.; Mohammed H.I.; Khosravi K.; Abed A.M.; Boujelbene M.; Mahdi J.M.
International Communications in Heat and Mass Transfer , Vol. 156
17 استشهاد Article English ISSN: 07351933
Department of Mechanical Engineering, College of Engineering, University of Ha'il, Ha'il City, 81451, Saudi Arabia; Laboratory of Thermal and Energetic Systems Studies (LESTE) at the National School of Engineering of Monastir, University of Monastir, Tunisia; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbalaa, 56001, Iraq; Department of Physics, College of Education, University of Garmian, Kurdistan, Kalar, 46021, Iraq; Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, 110 8th street, Troy, 12180, NY, United States; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, Iraq; Industrial engineering department, College of Engineering, Hail University; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq
This study aimed to explore the impact of longitudinal and circular fin configurations on the melting dynamics and thermal performance of latent heat storage (LHS) systems utilizing phase change materials (PCMs). Through comprehensive 3D numerical analysis, the effects of fin orientation, number, and arrangement were systematically examined to identify optimized designs for enhancing energy storage efficiency. The results revealed that strategically inclined longitudinal fins at 45° reduced complete melting time by 33.1% and increased heat storage rate by 77.8% compared to vertical fins, while increasing fin number from 4 to 10 yielded 22% faster melting and 48% higher storage capacity. Exploring circular fins showed the vertical orientation as optimal, decreasing melting duration by 54.4% and boosting heat storage by 218.3 W versus inclined fins. Raising circular fin number from 17 to 34 improved performance by 28.1% (melting time) and 19.4% (heat storage rate). Comparing the best longitudinal (10 angled fins) and circular (34 vertical fins) cases highlighted the latter's remarkable 28.13% faster melting and 19.4% greater storage rate, highlighting vertical circular fins' superiority. These quantitative insights on fin parameters and orientations can significantly enhance the LHS efficiency and application. © 2024 Elsevier Ltd
الكلمات المفتاحية: Fins Heat transfer enhancement Melting Phase change materials Thermal energy storage
Zhou X.; Ding C.; Abed A.M.; Abdullaev S.; Ahmad S.F.; Fouad Y.; Dahari M.; Mahariq I.
Renewable Energy , Vol. 233
17 استشهاد Article English ISSN: 09601481
School of Mathematics, Physics and Optoelectronic Engineering, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Rausser College of Natural Resources, University of California, Berkeley, CA, United States; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Scientific and Innovation Department, Tashkent State Pedagogical University Named After Nizami, Tashkent, Uzbekistan; Department of Engineering Management, Institute of Business Management, Karachi, Pakistan; Department of Applied Mechanical Engineering, College of Applied Engineering, Muzahimiyah Branch, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia; Department of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
To ensure the health of vulnerable coastal ecosystems, a transition to sustainable energy solutions is essential. Environmentally friendly systems powered by renewable sources offer not only a reduction in pollution but also the adaptability needed for a flexible and resilient energy future. This study proposes and comprehensively evaluates an integrated solar-based system designed to meet the daily needs of coastal cities. The proposed system incorporates key components such as dual-loop power cycles, parabolic trough solar collectors, liquefied natural gas (LNG) regasification, reverse osmosis, and proton exchange membrane electrolysis. To optimize energy utilization, the inclusion of a thermoelectric generator (TEG) is considered, harnessing the thermal gradient among the LNG stream and the power cycle fluid. We conduct transient modeling, incorporating comprehensive scenarios that account for both thermal and economic aspects. The performance evaluation of the system focuses specifically on coastal regions, with San Francisco serving as a case study. The dynamic simulation results demonstrate the capability of the integrated system in fulfilling the urban needs for one year, delivering 1,134,207 cubic meters of potable water and generating 11,306 MWh of electricity. Financial analysis reveals that the solar unit accounts for over 46 % of the total cost, with an hourly cost rate of $69.61. The levelized cost of electricity is predicted at 4.61 cents/kWh, while the levelized cost of water is calculated at 30.54 cents/m3. These findings provide valuable insights into the cost-effectiveness and competitive advantage of the system in terms of energy and water production. © 2024
الكلمات المفتاحية: Hydrogen production Sensitivity analysis Thermal design Thermo-economic analysis Thermoelectric generator
Li X.; Abed A.M.; Shaban M.; Le L.T.; Zhou X.; Abdullaev S.; Alhomayani F.M.; Elmasry Y.; Mahariq I.; Afzal A.R.
Energy , Vol. 313
16 استشهاد Article English ISSN: 03605442
School of Economics and Management, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Physics, Faculty of Science, Islamic University of Madinah, Madinah, 42351, Saudi Arabia; Department of Business, Greenwich Vietnam, FPT University, Hanoi, Viet Nam; School of Mathematics, Physics and Optoelectronic Engineering, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Department of Science and Innovation, Tashkent State Pedagogical University Named After Nizami, Tashkent, Uzbekistan; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Department of Mathematics, College of Science, King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Applied Science Research Center, Applied Science Private University, Amman, Jordan; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Industrial Engineering, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia
Utilizing the capabilities of artificial intelligence can lead to the development of energy systems and power supply chain that are more efficient, sustainable, and resilient. The integration of machine learning techniques within these systems provides substantial benefits and is essential for enhancing overall performance. As the global community confronts challenges like climate change and rising energy demands, machine learning will play an increasingly vital role in defining the future of energy systems. This research examines how effective regression-based machine learning techniques are for analyzing and optimizing the performance of a geothermal combined heat and power system. It focuses on creating both linear and quadratic models to assess electricity generation, heat production, and the efficiency of the entire system. The evaluation of these models is performed through residual analysis and R-squared statistics. Results indicate that quadratic models surpass linear ones, with linear model achieving an R-squared value of 88.56 % for power generation, while the quadratic model reaches an impressive R-squared level of 99.88 %. Furthermore, the study demonstrates that quadratic machine learning models hold significant promise for optimizing system performance, shown by desirability metrics exceeding 0.99. This research highlights the importance of regression-based machine learning methods in analyzing and improving geothermal combined heat and power systems. © 2024 Elsevier Ltd
الكلمات المفتاحية: Artificial intelligence Clean production Environmental protection Machine learning Waste energy
Kou C.; Alghassab M.A.; Abed A.M.; Alkhalaf S.; Alharbi F.S.; Elmasry Y.; Abdullaev S.; Garalleh H.A.; Tarawneh M.A.
Journal of Energy Storage , Vol. 85
15 استشهاد Article English ISSN: 2352152X
Xijing University, Shaanxi, Xi'an, 710123, China; Department of Electrical, College of Engineering, Shaqra University, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Information Technology, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Mechanical Engineering, College of Engineering, University of Hafr Al Batin, P.O. Box 1803, Hafr Al Batin, 39524, Saudi Arabia; Department of Mathematics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Senior Researcher, Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Senior Researcher, Department of Science and Innovation, Tashkent State Pedagogical University named after Nizami, Tashkent, Uzbekistan; Department of Mathematical Science, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Physics, College of Science, Al-Hussein Bin Talal University, P. O. Box 20, Ma'an, Jordan
Hydrogen, as an energy carrier, requires efficient handling and regulation, especially during storage and release phases. The efficient hydrogen release from the storage tanks is often coupled with a rapid decompression process. Pressure regulators, hydrogen sensors, and monitoring systems are commonly used to control the pressure of hydrogen gas in storage tanks and distribution systems. Besides the mentioned methods, Tesla valves offer a compelling solution due to their unique design and functionality. In the current research, a novel two-stage Tesla valve was designed to regulate the hydrogen flow in both forward and reverse directions. Artificial neural networks (ANN) and response surface methodology (RSM) were applied to provide the prediction models. Presenting these ready-made and pre-determined models can help researchers and developers of Tesla valves to achieve their goals in the shortest time and with the lowest cost. In this research, two different prediction models were employed to predict the diodicity (Di) and absolute pressure drop ratio (APDR) in the Tesla valve. The distance between stages (X), length of divider (L), valve angle (θ), and depth of divider penetration (H) are the input variables of the prediction models. These variables, as the most influential parameters, are carefully selected and manipulated within specified ranges. Moreover, single- and multi-objective optimizations were performed by genetic algorithm, and the Pareto fronts for Di and APDR were presented. For the first time, the combination of these three methods (ANN, RSM, and genetic algorithm) was employed herein to investigate the decompression performance and hydraulic behavior of Tesla valves. Based on the findings, the ANN models exhibited higher accuracy with R2 values of 0.991 relative to RSM models (for both responses). The optimized design significantly enhanced the pressure drop of hydrogen flow in the reverse direction, resulting in an improvement of about 379.5 % in diodicity. Besides, the novel two-staged Tesla valve enhanced the pressure drop by about 4830 % and 1354 % in reverse and forward directions compared to the simple straight channel. © 2024 Elsevier Ltd
الكلمات المفتاحية: Artificial Neural Network Energy storage Genetic algorithm Hydrogen decompression Optimization Tesla valve
Namuq S.A.; Hammoodi K.A.; Abed A.M.; Mahdi J.M.
Journal of Building Engineering , Vol. 98
15 استشهاد Article English ISSN: 23527102
Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, 51001, Iraq
Effective thermal management is crucial to enhance the performance and longevity of photovoltaic-thermal (PVT) systems. Phase change materials (PCMs) offer a promising solution for absorbing excess heat from PV modules; however, their poor thermal conductivity limits their effectiveness. This work explores the incorporation of porous fins within PCMs to improve heat absorption and thermal regulation in PVT systems. A detailed mathematical model is developed to analyze the effects of varying fin porosity (0.85–0.95), fin thickness (7–21 mm), fin height (7–21 mm), and fin inclination (−15°–30°) on PCM melting and PVT cooling performance. Results show that optimally configured porous fins significantly enhance PCM melting rates and heat extraction from PV cells. Incorporating optimal fins reduces peak PV temperatures by up to 5 °C compared to PCM alone at irradiation rate of 1000 W/m2. Meanwhile, reducing the fin thickness from 21 to 7 mm accelerates the overall PCM melting rate by 14 %. The cooling performance also shows a nonlinear increase with fin tilt angle, with maximum enhancement occurring at 15° downward tilt for the studied configuration. The optimized fin-enhanced PVT design achieves 3.1 % higher electrical efficiency and 15 % increase in thermal efficiency compared to conventional PCM-PVT systems without fins. Findings provide design guidance to harness porous fins for maximized PCM-based cooling of PVT systems. © 2024 Elsevier Ltd
الكلمات المفتاحية: Melting Phase change materials Photovoltaic-thermal system Porous fins Thermal management
Dong R.-E.; Abed A.M.; Singh P.K.; Elboughdiri N.; Alharbi F.S.; Alkhalaf S.; Bouzgarrou S.M.; AL Garalleh H.; Elrashidi A.; Islam S.
Applied Thermal Engineering , Vol. 243
14 استشهاد Article English ISSN: 13594311
College of Mechanical Engineering, Xijing University, Shaanxi, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, U.P., Mathura, 281406, India; Chemical Engineering Department, College of Engineering, University of Ha'il, P.O. Box 2440, Ha'il, 81441, Saudi Arabia; Chemical Engineering Process Department, National School of Engineers Gabes, University of Gabes, Gabes, 6029, Tunisia; Department of Mechanical Engineering, College of Engineering, University of Hafr Al Batin, P.O. Box 1803, Hafr Al Batin, 39524, Saudi Arabia; Department of Computer, College of Science and Arts in Ar Rass, Qassim University, Ar Rass, Qassim, Saudi Arabia; Civil Engineering Department, College of Engineering, Jazan University, P.O. Box. 706, Jazan, 45142, Saudi Arabia; Department of Mathematical Science, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Electrical Engineering, University of Business and Technology, Jeddah, 21432, Saudi Arabia; Department of Engineering Physics, Alexandria University, Alexandria, 21544, Egypt; Civil Engineering Department, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia
A novel hybrid system integrating solid oxide fuel cells (SOFCs) and segmented annular thermoelectric generator (SATEG) is proposed for enhanced performance. This study employs advanced numerical simulations and finite element analysis to explore the dynamic behavior and assess various parameters' impacts within this innovative system. The numerical methods undergo cross-validation by incorporating analytical and experimental data derived from existing literature. The research reveals that segmented configurations, which combine high-temperature materials (skutterudites) on the hot side and low-temperature materials (bismuth tellurides) on the cold side, outperform non-segmented setups in terms of power generation and thermoelectric efficiency. Moreover, the study emphasizes the crucial role of cell voltage in determining fuel cell efficiency and highlights the importance of tailored thermoelectric materials for specific temperature ranges. At an operating temperature of 900 °C and a cell voltage of 0.7, the segmented configuration boasts an approximately 76 % higher thermoelectric efficiency compared to its non-segmented counterpart. Additionally, the investigation explores the influence of height ratios within the segmented thermoelectric generator, demonstrating the need for customizing design parameters to optimize performance. Furthermore, the study delves into the effects of altering cathode and anode inlet velocities on key parameters. Increasing the anode inlet velocity enhances SOFC power density and efficiency, while higher cathode inlet velocities boost thermoelectric power generation and SATEG conversion efficiency. In summary, this research contributes valuable insights into the design and optimization of hybrid SOFC/SATEG systems, highlighting the advantages of segmented configurations and the importance of tailoring system parameters to specific operating conditions. © 2024 Elsevier Ltd
الكلمات المفتاحية: Energy Conversion Efficiency Fuel cell Power generation Segmented annular thermoelectric generator Thermal Energy
Abed A.M.; Chauhan B.S.; Ayed H.; Mouldi A.; Ghoushchi S.P.; Deifalla A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 57
14 استشهاد Article Open Access English ISSN: 2214157X
Air Conditioning and Refrigeration Techniques Engineering Department, College of engineering and technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Uttar Pradesh, Mathura, India; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam; Full Professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
For the purpose of enhancing the thermal efficiency of double-tube heat exchangers, a new technique has been implemented. By integrating a vibrating turbulator and bubble injection technique, this innovative method produces an added turbulence effect. This research aims to experimentally assess the thermal efficiency of employing two active methods concurrently. Different parameters were analyzed, including water flow rates ranging from 0.5 to 4 kg/min and bubble injection flow rates varying from 2 to 6 l/min, to investigate the effects on heat transfer and pressure drop with and without the magnetic turbulator. The results suggest that by incorporating bubble injection, adopting the magnetic turbulator, and simultaneously utilizing both methods, there is a significant improvement in heat transfer. In optimal scenarios, the heat transfer coefficient is amplified by 150.3% through the injection of bubbles, 328.8% through the implementation of magnetic turbulator, and 586.2% when both techniques are employed in tandem. In comparison to the smooth tube, the friction factor ratios were 6.7, 1.6, and 7.8 times higher in the specified cases. The findings indicated that the concurrent utilization of both techniques can yield an added impact on heat transfer. Ultimately, the integrated approach demonstrated a noteworthy thermal enhancement factor value of 3.49. © 2024 The Authors
الكلمات المفتاحية: Bubble injection Heat transfer Magnetic turbulator Pressure drop
Yan C.; Abed A.M.; Chaturvedi R.; Dahari M.; Abdullaev S.; Zhou X.; Mahariq I.; Elmasry Y.
Journal of Energy Storage , Vol. 101
14 استشهاد Article English ISSN: 2352152X
School of Economics and Management, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Mathura, India; Deparment of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Scientific and Innovation Department, Tashkent State Pedagogical University named after Nizami, Tashkent, Uzbekistan; School of Mathematics, Physics and Optoelectronic Engineering, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Mathematics, College of Science, King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia
This research aims to address the critical need for sustainable cooling systems in greenhouses, particularly relevant in mitigating global warming impacts and enhancing food security worldwide. The urgency becomes more pronounced in locations experiencing high ambient temperature and humidity. The study introduces an innovative cooling system integrating Phase Change Material, a desiccant wheel, and an absorption chiller, powered by solar and biomass energy. This novel system aims to efficiently regulate temperature and humidity in greenhouse environments. The performance of this system is examined in Abu Dhabi, Doha, and Riyadh during the summer months, utilizing TRNSYS software for a medium-scale greenhouse model. Additionally, a comprehensive Life Cycle Assessment is carried out to quantify the environmental impacts of the proposed system. Results indicate that in Abu Dhabi, the system yields a Coefficient of Performance (COP) of 1.108, effectively maintaining indoor climate conditions. Similarly, Doha and Riyadh exhibit COPs of 1.015 and 0.827, respectively. In terms of solar energy utilization, Abu Dhabi demonstrates a solar fraction of 40.4, corresponding to the lowest Global Warming Potential (GWP) at 0.106 kg CO2eq per 1 kW of provided cooling capacity. Conversely, Riyadh records the highest GWP at 0.149 kg CO2eq, followed by Doha at 0.118 kg CO2eq. The Energy Payback Time (EPBT) for the system in Abu Dhabi is calculated to be 3.96 years, the shortest among the examined cities. In comparison, Doha and Riyadh present longer EPBTs of 4.48 and 5.83 years, respectively. These findings suggest that the proposed system offers a viable and environmentally friendly alternative to conventional greenhouse cooling approaches. © 2024 Elsevier Ltd
الكلمات المفتاحية: Absorption chiller Biomass boiler Desiccant wheel Energy storage Phase change material Solar energy
Abdulkadhim A.; Hassan A.M.; Abed A.M.; Abed I.M.; Said N.M.
Journal of Thermal Analysis and Calorimetry , Vol. 149 (22), pp. 13233-13253
13 استشهاد Article English ISSN: 13886150
Mechanical Engineering Department, College of Engineering, University of Al-Qadisiyah, Al-Qadisiyah Province, Al Diwaniyah, 58001, Iraq; Mechanical Power Techniques Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Babylon Province, Hillah, 51001, Iraq; Mechanical Engineering Department, University of Babylon, Babylon Province, Hillah, Iraq; Department of Physics, College of Science, King Khalid University, Abha, 61413, Saudi Arabia
The present work examines numerically the natural convection along with the entropy generation within H-shaped enclosure with wavy walls filled by (Ag-MgO/water) hybrid nanofluid considering inner bodies and under the influence of horizontal magnetic field and thermal radiation using finite element scheme. The inner bodies of the circular shapes are kept at a hot temperature, while the two-sided wavy walls are kept at a cold temperature. The rest of the enclosure’s walls are thermally insulated. The influence of many parameters had been examined such as Rayleigh number (103≤Ra≤105), Hartmann number 0≤Ha≤60 vertical location of inners bodies 0.2≤δ≤0.8, distance between inner bodies 0.3≤E≤0.9, height of the enclosure walls 0.2≤B≤0.8 and width of the enclosure wall 0.1≤A≤0.9 in addition to the radiation parameter 0≤Rd≤3 on fluid flow, heat transfer and entropy generation. The results of this study had been presented in terms of streamlines, isotherms, entropy generation, Nusselt and Bejan number. The results showed that the Nusselt number will be at its lowest value when the vertical location of the inner bodies is δ=0.8 and the influence of Hartmann number will be negligible at this value. Also, at high Rayleigh number Ra=105 increasing the distance between the inner bodies from E=0.3 into E=0.9 leads to increasing Nu by 76%. However, increasing the height of the enclosure’s walls from B=0.2 into B=0.8 leads to enhancing Nu by 0.02%. However, increasing width of the enclosure wall from A=0.1 into A=0.9 leads to an obvious reduction in Nusselt number by 20%. Additionally, it had been obtained that increasing the vertical location of the inner bodies, the distance between them and the width of the enclosure and reduction of the height of the enclosure’s wall lead to increasing Bejan number. Stronger magnetic fields enhance conductive heat transfer; increasing the Bejan number which represents irreversibility as noted at increasing Hartmann number from Ha=0 into Ha=60 leads to increasing Bejan number by 79%. © Akadémiai Kiadó, Budapest, Hungary 2024.
الكلمات المفتاحية: Bajan number Entropy generation H-shaped enclosure Magnetohydrodynamics Natural convection
Zhang Q.; Han S.; Abed A.M.; Basem A.; El-Sharkawy M.R.; Salah B.; Mahariq I.
Process Safety and Environmental Protection , Vol. 191, pp. 448-465
13 استشهاد Article English ISSN: 09575820
School of Data Science and Artificial Intelligence, Wenzhou University of Technology, Zhejiang, Wenzhou, 325035, China; School of Mathematics and Computer Science, Tongling University, Anhui, Tongling, 244061, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hillah, 51001, Iraq; Al -Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Faculty of Engineering, Warith Al-Anbiyaa University, Karbala, 56001, Iraq; Al-Amarah University College, Engineering of Technical Mechanical Power Department, Maysan, Iraq; Automotive and Tractors Engineering Department, Faculty of Engineering, Minia University, Minia, Egypt; Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
The increasing prevalence of electric vehicles underscores the need for enhanced battery pack safety, particularly against impacts that can lead to thermal runaway and fires. This study investigates the mechanical and thermal characteristics of battery packs subjected to cone impact on the lower part. Utilizing finite element model (FEM) simulations, we examined the effects of top radius, shell condition, velocity, and angle on the battery pack's response. Five machine learning (ML) techniques were employed to predict the battery pack's behavior under impact, with training data generated from a well-planned Latin hypercube experiment based on FEM dynamic simulations. The accuracy and robustness of the ML models were evaluated under various scenarios, including the introduction of Gaussian noise. Among the models tested, BESA-ELMM (Bald eagle search algorithm-Extreme learning machine model) demonstrated exceptional speed, making it suitable for real-time assessments, while WOA-SVMM (whale optimization algorithm-Support vector machine model) exhibited superior resilience and accuracy, particularly under noisy conditions. Both models, along with the other ML techniques, showed significant effectiveness in predicting the mechanical responses of battery packs to impact. Our findings indicate that ML approaches are highly efficient in evaluating the mechanical effects on battery packs, providing crucial insights for designing safer and more durable battery packs. This study contributes to the advancement of battery safety by demonstrating the potential of integrating ML techniques with FEM simulations to enhance the resilience and impact resistance of battery packs in electric vehicles. © 2024 The Institution of Chemical Engineers
الكلمات المفتاحية: Battery Pack Cone Bottom Impact Data-Driven Modelling Gaussian Noise Machine Learning Techniques Mechanical and Thermal Safety
Al-qazzaz A.; Eidgah E.E.F.; Alfatlawi A.-W.; Masroori A.; Abed A.M.; Ajam H.; Kianifar A.
Results in Engineering , Vol. 23
13 استشهاد Article Open Access English ISSN: 25901230
Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran; Department of Imam Al-Kadhum University College, Baghdad, Iraq; Department of Mechanical Engineering, University of Kufa, Najaf, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq
Biomass, as a renewable energy source, has gained attention as a sustainable alternative to conventional fuels due to its global availability and usability in rural areas. However, biomass combustion presents challenges such as flame instability and pollutant emissions. This study compares the use of methane gas, wood shavings, and a combination of these two fuels, examining the effects of preheating and flame stability in the combustion of natural gas, biomass, and their co-firing using numerical methods. An equivalence ratio of 1 has been used to avoid a rich-fuel mixture, and an air mass flow rate of 0.0001 kg/s are considered to ensures a sufficient supply of oxygen for the combustion process. Biomass fuel particles are injected from the surface of the fuel and its particle diameter ranging between 5 and 10 μm. The results showed that using the combined fuel not only increased the flame temperature at the beginning of the combustion chamber but also achieved more complete and stable combustion, with over 97 % of the fuel consumed at the start of combustion. As a result of this complete combustion, the emissions of toxic gases CO and NOx in the combustion products reached zero. Additionally, preheating the air increased the flame temperature by 14 %, while preheating the fuel reduced NOx emissions by 24 %. © 2024 The Authors
الكلمات المفتاحية: Biomass Combustion Flame stability Natural gas NO<sub>x</sub> Pollutant emissions
Hamza N.H.; Abdulkadhim A.; Mohsen A.M.; Abed A.M.
Heat Transfer , Vol. 53 (2), pp. 707-732
13 استشهاد Article English ISSN: 26884534
Mechanical Engineering Department, University of Al-Qadisiyah, Al-Qadisiyah Province, Al Diwaniyah, Iraq; Mechanical Engineering Department, School of Engineering, Faculty of Innovation and Technology, Taylor's University, Subang Jaya, Malaysia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon Province, Hillah, Iraq
Domestic stack is considered to investigate the double-diffusive laminar natural convection. The working fluid is a gaseous mixture that has similar physical properties to carbon dioxide. Knowing the patterns of gaseous mixture distribution and determining the carbon deposit regions can help in carbon capture problems. The present study uses the finite element method to numerically examine the double ratio-diffusive physical phenomena in a rectangular-trapezoidal enclosure and to simulate the stack under a wide range of dimensionless parameters, such as buoyancy ratio (Formula presented.), Lewis number (Formula presented.), and Rayleigh number (Formula presented.) for different aspect ratios. Nine different cases of the geometrical ratio are selected to cover most possible design configurations. The results indicate that increasing the Lewis number leads to augmented solutal transport but reduces heat transfer. However, both heat and mass transfer are observed by increasing the buoyancy ratio. It is worth mentioning that increasing the ratio of upper side length to base length (Formula presented.) from (Formula presented.) to (Formula presented.) leads to a significant increase in mass transfer by 75% and heat transfer enhancement ratio by around 50%. © 2023 Wiley Periodicals LLC.
الكلمات المفتاحية: domestic stack double-diffusive flow numerical simulation parametric study
Meng J.; Abed A.M.; Elsehrawy M.G.; Al Agha A.; Abdullah N.; Elattar S.; Abbas M.; AL Garalleh H.; Assilzadeh H.
Heliyon , Vol. 10 (10)
13 استشهاد Retracted Open Access English ISSN: 24058440
College of Foreign Languages, Jilin Agricultural University, Jilin Province, Changchun City, China; Mechanical power Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Prince Sattam Bin Abdulaziz University, College of Applied Medical Sciences, Saudi Arabia; Nursing Faculty, Port-Said University, Egypt; Department of Mathematical Science, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Industrial & Systems Engineering, College of Engineering, Princess Nourah bint Abdulrahman University, P.O.Box 84428, Riyadh, 11671, Saudi Arabia; Electrical Engineering Department, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Faculty of Architecture and Urbanism, UTE University, Calle Rumipamba S/N and Bourgeois, Quito, Ecuador; Institute of Research and Development, Duy Tan University, Da Nang, Viet Nam; School of Engineering & Technology, Duy Tan University, Da Nang, Viet Nam; Department of Biomaterials, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences, Chennai, 600077, India
Universities and colleges play a pivotal role in the pursuit of a future that is sustainable through their pedagogical efforts and the execution of state-of-the-art research endeavors aimed at mitigating the effects of climate change. Higher Education Institutions (HEIs) serve as crucial catalysts in advancing sustainable development. HEIs are increasingly embracing precise measures to reduce their carbon footprint (CF) while also educating students on global sustainability. These nano-methods provide a quantitative framework for assessing a campus's sustainability efforts in line with Green Campus (GC) initiatives to lower carbon emissions align with GC goals. This study employs K-means clustering to analyze the integration of green and low-carbon principles in higher education political and ideological studies. Its goal is to identify patterns, assess teaching effectiveness, and improve sustainability education, aligning with Green Campus initiatives to enhance institutional contributions to sustainable growth through informed pedagogical strategies. Input data includes curriculum content, teaching methods, student engagement, and institutional goals related to sustainability. Seeking to improve sustainability education align with Green Campus initiatives, higher education can strategically enhance their contributions to long-term sustainability and growth through effective pedagogical approaches. Cluster 3 has the lowest WCSS value of 1200, indicating tighter cohesion and less variability within this cluster compared to Cluster 1 (1500) and Cluster 2 (1800). Cluster 3 stands out with the highest silhouette score of 0.7, suggesting well-defined and distinct clusters, while Cluster 2 has the lowest score of 0.4, indicating some overlap or ambiguity in data points. Cluster 1 has the lowest Davies-Bouldin Index of 0.4, implying better separation between clusters compared to Cluster 2 (0.6) and Cluster 3 (0.5). Cluster 3 is well-defined and cohesive, showing strong integration of green practices. Cluster 1 displays good separation and cohesion, while Cluster 2 requires refinement due to potential overlap in sustainability integration. © 2024
الكلمات المفتاحية: Carbon footprint (CF) Green campus initiatives Higher education institutions (HEIs) K-means clustering Sustainability education Sustainable development
Abed A.M.; Chauhan B.S.; Ayed H.; Mouldi A.; Lee V.F.; Deifalla A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 56
12 استشهاد Article Open Access English ISSN: 2214157X
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hillah, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Uttar Pradesh, Mathura, India; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; School of Engineering and Technology, Duy Tan University, 254 Nguyen Van Linh, Danang, Viet Nam; Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
The fluctuating nature of wind energy and shortage of biomass resources, as two types of renewables, can be fulfilled via their hybridization. In this respect, present research proposes a hybrid biomass/wind energy driven power generation framework based on combined gas turbine-Rankine cycle scheme. The gas turbine includes a reheat stage where the produced hydrogen is added to the combustion chamber for increasing flue gas temperature to enhance output power. The injected hydrogen is generated via a water electrolyzer which is powered by electricity from the wind turbines. The proposed scheme of biomass/wind powered system leads to a reduction in biomass consumption and will fulfill the fluctuations and non-continuous availability of wind energy. To appraise the feasibility of developed hybrid scheme, thermodynamic first and second law-based analyses were performed. Also, the exergo-environmental evaluation of the hybrid plant is conduced using three exergo-environmental indices. Finally, optimum operation conditions of the proposed hybrid plant is determined based on the minimization of environmental damage index. The results under optimum operation indicate that, the proposed hybrid power generation plant yields exergy efficiency of 47.35 % with environmental damage index of 0.0104. © 2024 The Authors
الكلمات المفتاحية: Biomass Exergy analysis Hybrid renewable energy Hydrogen Wind turbine
Abed A.M.; Chauhan B.S.; Ayed H.; Mouldi A.; Ghoushchi S.P.; Deifalla A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 57
11 استشهاد Article Open Access English ISSN: 2214157X
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Uttar Pradesh, Mathura, India; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam; Full Professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
This study represents a pioneering investigation into the impact of a punched twisted tape turbulator on the hydrothermal parameters of a pipe operating under constant surface temperature conditions. The punched turbulator was specifically designed by incorporating cuts with diverse geometries, including semicircular, square, and triangular shapes, into the basic twisted tape turbulator. To evaluate the performance of the punched twisted tape, a comparative analysis was conducted with both a smooth tube and a tube equipped with a basic turbulator. The criterion for selecting the optimal cut geometry was the thermal enhancement factor. Subsequently, the influence of the cut area on the hydrothermal parameters was thoroughly elucidated. The enhancement factor was again utilized to identify the most optimal area. Based on the comprehensive evaluations, it was observed that the turbulator with a semicircular cut geometry and a diameter of 5 mm exhibited superior thermal performance compared to all other geometries. By employing this specific turbulator design, a remarkable enhancement in heat transfer and pressure drop within the heat exchanger was achieved, offering improvements of up to 1.63 and 3.65 times, respectively, when contrasted with the plain tube. The maximum enhancement factor value recorded during the investigation reached 1.09. © 2024
الكلمات المفتاحية: Enhanced turbulator Heat transfer Pressure drop Punched twisted tape turbulator
Bai Z.; Abed A.M.; Singh P.K.; Abduvalieva D.; Alkhalaf S.; Elmasry Y.; Alruwaili A.; Alharbi F.S.; Riaz F.
Case Studies in Thermal Engineering , Vol. 55
11 استشهاد Article Open Access English ISSN: 2214157X
School of Intelligent Manufacturing, Anhui Xinhua University, Anhui, Hefei, 230088, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, U.P., Mathura, 281406, India; Tashkent State Pedagogical University, Bunyodkor Avenue, 27, Tashkent, 100070, Uzbekistan; Department of Information Technology, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Mathematics - Faculty of Science - King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Department of Physics, College of Science, Northern Border University, Arar, Saudi Arabia; Department of Mechanical Engineering, College of Engineering, University of Hafr Al Batin, P.O. Box 1803, Hafr Al Batin, 39524, Saudi Arabia; College of Engineering, Abu Dhabi University, Abu Dhabi, United Arab Emirates; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq
Temperature plays a crucial role in various industries, equipment, and human life, and heat exchangers emerge as fundamental devices in managing this essential parameter. Heat exchangers come in various types, each tailored for specific applications. One commonly utilized variant is the finned-tube heat exchanger, which excels in transferring heat between liquid and gas. This study involved a numerical investigation of a finned-tube heat exchanger equipped with four bow-shaped vortex generators. The primary objective of this study was to assess the influence of three distinct geometric parameters associated with vortex generators on the performance of the heat exchanger. The key performance indicators investigated in this research were the Nusselt number and friction factor, which respectively represent the thermal and hydraulic performance of the device. Also, the relative efficiency index parameter was investigated to evaluate thermal and hydraulic performances simultaneously. Artificial Neural Network and Genetic Algorithm methods were employed to develop response models to simplify and increase the analysis accuracy and determine the optimal geometry. The artificial neural network's prediction models demonstrated high accuracy and effectively forecasted the desired outcomes. It was determined that the relative efficiency index of the finned-tube heat exchanger with vortex generators, even in its weakest-performing design, reached 1.0467. This means that by adding the bow-shaped vortex generators to the heat exchanger, there is a 4.67% increase in the overall performance in the worst case. Also, after predicting the optimal design for the heat exchanger, it was observed that this device has a 13.12% improvement in overall performance compared to the case without vortex generators. To adjust the Nusselt number of the finned-tube heat exchanger lacking vortex generators with that of the finned-tube heat exchanger featuring the optimal design, it is necessary to increase the inlet flow rate of the vortex generators-lacking heat exchanger by 53.20%. This increase in flow rate leads to a significant escalation of 108.73% in the heat exchanger's pumping power compared to the pumping power of the optimal design heat exchanger. © 2024 The Authors
الكلمات المفتاحية: Artificial Neural Network Heat transfer improvement Numerical Model Nusselt number Optimization Vortex inducer
Li S.; Leng Y.; Abed A.M.; Dutta A.K.; Ganiyeva O.; Fouad Y.
Process Safety and Environmental Protection , Vol. 187, pp. 876-891
11 استشهاد Article English ISSN: 09575820
Information Engineering College, Yantai Institute of Technology, Yantai, 264005, China; School of Computer Science and Technology, Shandong Technology and Business University, Yantai, 264005, China; School of Physics and Electronic Information, Yantai University, Yantai, 264005, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Computer Science and Information Systems, College of Applied Sciences, AlMaarefa University, Riyadh, Ad Diriyah, 13713, Saudi Arabia; Department of Information Technology in Mathematics and Education, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Department of Applied Mechanical Engineering, College of Applied Engineering, Muzahimiyah Branch, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia
Utilization of machine learning techniques in the analysis and enhancement of poly-generation energy systems improves their efficiency and sustainability. Also, waste-to-energy systems propose a hopeful answer for both waste management and sustainable energy and water production. The production of hydrogen and freshwater through these systems not only provides valuable resources but also contributes to environmental sustainability. This research utilizes artificial intelligence's machine learning algorithms to examine and enhance a waste-to-energy system within a poly-generation energy system that generates hydrogen, freshwater, power, oxygen, and hot air. The integrated system consists of a waste combustion chamber, a proton exchange membrane electrolyzer, a supercritical carbon dioxide Brayton cycle, and a desalination system. Based on the findings, the machine learning algorithms exhibiting R-squared values exceeding 99% are considered strong fits. Additionally, all algorithms with high predicted R-squared values have the capability to accurately forecast new data using the provided training data. The emissions of 669.7 g/kWh and an efficiency of 69.62% are achieved when the pressure ratio is 10.73 and the temperature is 863.6 °C under optimal conditions. The accuracy and validity of the machine learning techniques are further confirmed by the strong agreement with thermodynamic modeling. © 2024 The Institution of Chemical Engineers
الكلمات المفتاحية: Artificial intelligence Energy systems Environmental protection Machine learning Waste-to-energy
Yan C.; Abed A.M.; Singh P.K.; Li X.; Zhou X.; Lei G.; Abdullaev S.; Elmasry Y.; Mahariq I.
Energy , Vol. 312
11 استشهاد Article English ISSN: 03605442
School of Economics and Management, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, UP, Mathura, 281406, India; School of Mathematics, Physics and Optoelectronic Engineering, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Scientific and Innovation Department, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Department of Mathematics, College of Science, King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Applied Science Research Center, Applied Science Private University, Amman, Jordan; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
In an era where sustainable waste management and clean energy production are paramount, this study presents an innovative integration of plastic waste gasification with solid oxide fuel cell (SOFC) technology, optimized through metaheuristic particle swarm optimization (PSO). The research explores the conversion of polypropylene (PP) waste into syngas via gasification, which is then utilized as a fuel for SOFCs to generate electricity. The optimization process focuses on maximizing power and heating outputs while minimizing carbon dioxide emissions. The study's findings demonstrate the potential of integrating gasification and SOFC technologies to create a sustainable energy system that addresses the challenges of plastic waste. Key findings from the metaheuristic PSO multi-objective optimization reveal that optimal power production, approximately 360 kW, is achieved at temperatures exceeding 1140 K, irrespective of the steam/PP waste ratio. Heating production peaks at 1000 kW with temperatures above 1120 K and utilization factors over 0.765, while the minimum heating output is 700 kW. Emission analysis indicates a significant reduction in carbon dioxide emissions with increased temperatures and utilization factors, achieving a minimum of 700 kg/MWh at temperatures above 1120 K. The study's results demonstrate the effectiveness of the PSO optimization in fine-tuning the operational parameters of the integrated system, leading to improved energy efficiency and reduced environmental impact. Power production of 366.37 kW, a significant heating rate of 995.20 g/s, and emissions of 714.06 kg/MWh are the optimum performances. The research provides valuable insights into the potential of plastic waste-to-energy technologies as sustainable solutions for energy production and waste management. © 2024 Elsevier Ltd
الكلمات المفتاحية: Emission analysis Metaheuristic optimization Plastic waste gasification Sustainable energy Waste management
Zheng Z.; Yan G.; Abed A.M.; Alghassab M.A.; Abdullaeva B.; Alhomayani F.M.; Dutta A.K.; Mahariq I.; Alkhalaf S.; Alturise F.
Journal of Energy Storage , Vol. 102
10 استشهاد Article English ISSN: 2352152X
School of Intelligent Construction, Luzhou vocational and technical college, Sichuan, Luzhou, 646000, China; Luzhou Key Laboratory of Intelligent Construction and Low-carbon Technology, Sichuan, Luzhou, 646000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Electrical Engineering Department, College of Engineering, Shaqra University, Riyadh, 11911, Saudi Arabia; Department of Mathematics and Information Technologies, Vice-Rector for Scientific Affairs, Tashkent State Pedagogical University, Tashkent, Uzbekistan; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Department of Computer Science and Information Systems, College of Applied Sciences, AlMaarefa University, Riyadh, Ad Diriyah, 13713, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Computer Engineering, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Cybersecurity, College of Computer, Qassim University, Buraydah, Saudi Arabia
There's a growing emphasis on adopting eco-friendly energy sources to mitigate greenhouse gas emissions and foster sustainability. While renewable energy sources like solar power offer numerous benefits, they have some limitations. Additionally, storing electricity generated from solar panels can be costly and challenging due to limitations in battery technology and storage capacity. Therefore, phase change material-based thermal energy storage systems offer a promising solution to these challenges. These systems also play a crucial role in enhancing buildings' energy efficiency and sustainability. The dimensionality of these systems affects their performance. Traditional systems often rely on fixed dimensions, leading to non-uniform thermal conditions within the storage medium. To address these challenges, adopting a compact-latent heat storage (C-LHS) mechanism was recommended herein. Besides, some fins were inserted into the C-LHS system to alter the heat transfer dynamics within the device. Three of the critical parameters of the fins were changed to examine their impact on the charging time. Artificial neural networks and genetic algorithms were employed to determine the optimal positioning of fins to minimize the duration of material to get both part (melt fraction of 0.8) and full (melt fraction of 1) melting capacities. Here, the primary aim was to present a predictive model capable of accurately forecasting the charging time of the material. In all the presented finned samples, the entire PCM melted in less than 15,110 s (4 h and 12 min) and was able to fully utilize the energy absorption capacity in latent form, whereas in the non-finned system, only 68.6 % of the material managed to melt within the entire duration of the investigation (5 h). After analyzing the data, two optimal configurations of OS1 and OS2 with the minimum time for melt fractions of 0.8 and 1 were introduced. In the OS2 configuration, it took 16,200 s (4 h and 30 min) to absorb 4929 kJ of energy. The non-finned sample absorbed only 3250 kJ of energy during the same period. In General, OS2 achieved total energy absorption 51.6 % faster than the non-finned sample. Therefore, the introduced system has the potential to increase absorbed energy in the rest of the daylight hours to further amounts by increasing the number of units and employing a larger volume of material. © 2024 Elsevier Ltd
الكلمات المفتاحية: Compact latent heat storage Eco-friendly energy sources Fin configuration Machine learning Optimization Phase change material
Li W.; Li S.; M. Abed A.; Ayed H.; Khadimallah M.A.; Deifalla A.; Lee V.F.
Case Studies in Thermal Engineering , Vol. 59
10 استشهاد Article Open Access English ISSN: 2214157X
Logistics Division, Ludong University, Yantai, 264000, China; School of Computer Science and Technology, Shandong Technology and Business University, Yantai, 264005, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al -Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; School of Engineering and Technology, Duy Tan University, 254 Nguyen Van Linh, Danang, Viet Nam
The environmental advantages of hydrogen as a clean energy carrier are more prominent when it is produced utilizing renewable resources. In this regard, a novel geothermal energy driven electricity generation system integrated to hydrogen production plant is developed and investigated in this research. In the developed plant, a PEM electrolyzer is employed for hydrogen generation such that its required electricity is provided by an improved double-flash geothermal cycle. A self-superheater is applied for superheating the vapor at the steam turbine inlet using the geothermal resource to enhance the hydrogen production capacity. To evaluate feasibility of such superheating process and to examine its effects on hydrogen production, thermodynamic models are developed based on first and second laws. Also, environmental considerations are considered in evaluation of the proposed plant performance based on exergo-environmental indices. The influences of first and second flashing pressure, geothermal source temperature and current density of water electrolyzer on energy and exergy efficiency, hydrogen production rate, and environmental damage index are investigated. After carrying out a parametric study, the optimum operation point of the plant is determined via a two-objective optimization based on the hydrogen rate and environmental damage index (EDI). It is found that, under optimum operation, the system can produce 25.48 kg/h of hydrogen, while its environmental damage index is calculated to be as 0.00645. © 2024 The Authors
الكلمات المفتاحية: Double-flash cycle Exergo-environmental analysis Geothermal energy Green hydrogen PEM electrolyzer
Benaissa M.; Sultan Aljibori H.S.; Abed A.M.; Mahdi J.M.; Mohammed H.I.; Younis O.; Talebizadehsardari P.; Ben Khedher N.
International Communications in Heat and Mass Transfer , Vol. 159
10 استشهاد Article Open Access English ISSN: 07351933
Chemical Engineering Department, University of Ha'il, P.O. Box 2440, Ha'il, 81441, Saudi Arabia; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, Kurdistan, 46021, Iraq; Department of Mechanical Engineering, College of Engineering in Wadi Alddwasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Department of Mechanical Engineering, Faculty of Engineering, University of Khartoum, Sudan; Power Electronics, Machines and Control (PEMC) Research Institute, University of Nottingham, Nottingham, United Kingdom; Department of Mechanical Engineering, University of Ha'il, Ha'il City, 81451, Saudi Arabia
This study explores the augmentation of melting and solidification of phase change materials (PCMs) in thermal energy storage (TES) systems through strategic implementation of wavy fins. Employing computational fluid dynamics simulations, the study have analyzed the impacts of fin number, thickness, and placement on PCM phase change dynamics. The key findings reveal that the optimal wavy fin configuration (60° angled fins) achieved a 464 % increase in melting rate and 83 % decrease in melting time compared to the no-fin case. Increasing fin number from 3 to 5 improved the melting rate by 173.5 % and reduced melting time by 63.7 %. Shorter, thicker fins (0.5× wavelength) outperformed standard length fins by 5.5 % in terms of melting rate. For solidification, the optimal wavy fin design achieved 100 % solidification within 10,000 s, while the no-fin case reached only 93 % solidification. These results demonstrate that strategic implementation of wavy fins can significantly enhance both melting and solidification processes in PCM thermal storage, leading to substantial improvements in overall system efficiency and energy management capabilities. © 2024
الكلمات المفتاحية: Heat transfer enhancement Melting Phase change materials Solidification Thermal energy storage Wavy fins
Togun H.; Homod R.Z.; Aljibori H.S.S.; Abed A.M.; Alias H.; Hussein A.K.; Biswal U.; Al-Thamir M.; Mahdi J.M.; Mohammed H.I.; Ahmadi G.
Journal of Thermal Analysis and Calorimetry , Vol. 149 (17), pp. 10047-10060
9 استشهاد Article English ISSN: 13886150
Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, 10071, Iraq; Department of Oil and Gas Engineering, Basra University for Oil and Gas, Basra, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Al-Warith Center for Crowd Engineering and Management Research, University of Warith Al-Anbiyaa, Karbala, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; School of Chemical and Energy Engineering, Faculty of Engineering, University Teknologi Malaysia, Bahru, 81310 UTM Johor, Malaysia; College of Engineering, Mechanical Engineering Department, University of Babylon, Babylon City-Hilla, Iraq; Department of Mathematics, Laxminarayana College Jharsuguda, Odisha, 768201, India; Scientific Research Center, Al-Ayen University, Thi-Qar, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Department of Cooling and Air Conditioning Engineering, Imam Ja’afar Al-Sadiq University, Baghdad, Iraq; Department of Mechanical and Aerospace Engineering, Clarkson University, Potsdam, 13699-5725, NY, United States
This study examines the turbulent heat transfer characteristics of Al2O3–Cu hybrid nanofluids in circular ducts with triangular rib configurations. Numerical simulations were conducted for a 25 cm long, -cm high duct with walls maintained at 313 K. Hybrid nanofluids enter at 298 K, with triangular ribs on the internal surface at three attack angles (45°, 60°, and 90°) spaced 20 mm apart. Al2O3–Cu/H2O hybrid nanofluids at concentrations of 0.1–2 vol.% were investigated for Reynolds numbers between 20,000 and 60,000. The study aimed to determine the optimal rib configuration and nanofluid concentration for enhancing heat transfer while minimizing friction losses. Key findings include: (1) the 60° rib configuration produced the highest local heat transfer coefficient, with the maximum occurring at the rib centers. (2) Increasing nanofluid concentration and Reynolds number enhanced heat transfer but reduced skin friction. (3) The optimal performance was achieved with 2 vol.% Al2O3–Cu at Re = 60,000. (4) Velocity contours revealed larger recirculation zones for 60° ribs compared to 45° and 90° configurations. (5) Turbulent kinetic energy was highest for 60° ribs, contributing to enhanced thermal performance. These findings have implications for improving the efficiency of heat exchangers, cooling systems, and other thermal management applications. © Akadémiai Kiadó, Budapest, Hungary 2024.
الكلمات المفتاحية: Hybrid nanofluids Pipes with triangular ribs Thermal performance Turbulent flow
Xiong X.; Abed A.M.; Beemkumar N.; Mouldi A.; Loukil H.; Deifalla A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 59
9 استشهاد Article Open Access English ISSN: 2214157X
School of Mechanical Engineering, Xijing University, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Karnataka, Bangalore, India; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Electrical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Full Professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
This experimental study proposes a new approach to enhance heat transfer performance inside heat exchangers of engine by tandem utilization of bubble injection and a punched zigzag strip turbulator. The side edges of the zigzag turbulator underwent two distinct geometry modifications, involving V and U shape cuts. These cuts were made at varying zigzag angles, ranging from 60° to 150° and four diffirent surface area. The potential improvement in thermal efficiency of the heat exchanger was evaluated at different inlet Reynolds number ranging from 5390 to 10,860. Based on survey results, it has been demonstrated that at a Reynolds number of 5390, the Nusselt number and friction factor increase by 48% and 154% for U-Cut with a bending angle of 150°, and by 61% and 170% for V-Cut, respectively. Hence, V-cut boasts a TEF of 1.15, representing a 6.5% improvement over U-cut. Additionally, to assess further enhancement, air bubbles with flow rate ranging 2–6 LPM were introduced to the central tube while maintaining the superior geometry. The data suggests that incorporating air bubbles can enhance heat transfer up to 142%, achieving a TEF of 1.17 at an air flow rate of 6 LPM. © 2024 The Author(s)
الكلمات المفتاحية: Double tube heat exchanger Heat transfer Pressure drop U-cut zigzag turbulator V-cut zigzag turbulator Zigzag strip turbulator
HIDOURI K.; TOGUN H.; RASHID F.L.; ABED A.M.; HUSSEIN A.K.; ALI B.; ROUT S.K.; HAMIDA M.B.B.; BISWAL U.
Journal of Thermal Engineering , Vol. 10 (6), pp. 1698-1714
9 استشهاد Article Open Access English ISSN: 21487847
Research Unit of Energy, Water, Environment and Processes (RUEWEP), National Engineering School of Gabes, University of Gabes, Gabes, 6029, Tunisia; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, 10071, Iraq; Department of Petroleum Engineering, College of Engineering, University of Kerbala, Karbala, 56001, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, College of Engineering, University of Babylon, Babylon, 51001, Iraq; School of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen, 518055, China; Department of Mechanical Engineering, C.V. Raman Global University, Bhubaneswar, 752054, India; Department of Chemical Engineering, College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh, 11432, Saudi Arabia; Research Laboratory of Ionized Backgrounds and Reagents Studies (EMIR), Preparatory Institute for Engineering Studies of Monastir (IPEIM), University of Monastir, Monastir City, 5000, Tunisia; Higher School of Sciences and Technology of Hammam Sousse (ESSTHS), University of Sousse, 4000, Tunisia; Department of Mathematics, Laxminarayan College, Jharsuguda, 768202, India
In this review article the results for the last three years are given with regard to the energy payback time, the embodied energy, the emissions of carbon dioxide (CO2), conversion efficiency of life cycle, attenuation of the CO2 and the carbon credit earned (CCE). The study parameters are relatively difficult to follow their evolution according to the experimental prototype studied and the materials used. All depend on the nature of the design and the economic part. The findings demonstrated that embodied energy ranges from 30 to 100 percent of the total life cycle consumed. EPT typically depends on the location and the equipment used, and it has the least negative environmental effects when used in products with an average shelf life of 10 years or less, regardless of the type of solar still. Desalination methods attain their optimum efficiency very quickly in terms of sustainability, according to LCCE. CO2 mitigation is more likely to occur with active systems than with passive ones. The system (CSS + WM + PTC) with the highest embodied energy value among the systems under study has a value that is approximately 54% greater than that of CSS. © 2021, Yıldız Technical University.
الكلمات المفتاحية: CO<sub>2</sub> Mitigation Conversion Efficiency of Life Cycle Embodied Energy Energy Payback Time Environmental
Ling W.; Abed A.M.; Farouk N.; Fouad Y.; Abduvalieva D.; Islam S.; Garalleh H.A.; Alrawashdeh A.I.
Case Studies in Thermal Engineering , Vol. 59
9 استشهاد Article Open Access English ISSN: 2214157X
Xijing University, Shaanxi, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Mechanical Engineering Department, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Mechanical Engineering Department, Faculty of Engineering, Red Sea University, Port Sudan, Sudan; Department of Applied Mechanical Engineering, College of Applied Engineering, Muzahimiyah Branch, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia; Department of Mathematics and Information Technologies, Tashkent State Pedagogical University, Bunyodkor Avenue, 27, Tashkent, 100070, Uzbekistan; Civil Engineering Department, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Mathematical Science, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of General Subjects, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Chemistry and Chemical Technology, College of Science, Tafila Technical University, Tafila, 66110, Jordan
This study conducts an evaluation of an integrated power, heat, and cooling system reliant on geothermal energy. The process involves integrating both the Organic Rankine Cycle (ORC) and the Goswami cycle. The main objective of this investigation is to analyze the effects of different variables on the system's operation. Additionally, a comprehensive analysis is undertaken to examine how the presence of operational fluids in the ORC affects the overall efficiency of the system. Subsequently, an in-depth economic evaluation is conducted, taking into account the initial investment for system implementation, operational capital, and the levelized cost of goods. The calculation process involves determining the system's income, cash flow, and pay-back time, which heavily rely on the selling prices of the products. By utilizing a genetic algorithm in conjunction with an artificial intelligence algorithm, the system can be optimized to minimize pay-back time and levelized cost of energy, while simultaneously maximizing net production power. The results of this optimization process are then compared with the baseline state of the system to assess the effectiveness of the proposed enhancements. The multifaceted approach enables the evaluation of the system's performance across different conditions and facilitates the optimization of its parameters to improve efficiency and economic feasibility. The comparative optimization results demonstrated a 21 % reduction in payback time, a 14 % increase in net power, and a 12 % improvement in cooling when compared to the reference system state. The payback periods for different operating fluids ranged from 10 to 15 years. Isobutane demonstrated the shortest payback period of approximately 10 years, which was further optimized to 8.6 years. The system demonstrated a power output of 655.8 kW, a cooling output of 578.3 kW, and a heat output of 3042 kW. © 2024 The Authors
الكلمات المفتاحية: CCHP system Integrated thermal process Optimization Renewable energy Thermal modeling
Rajamony R.K.; Paw J.K.S.; Pandey A.K.; Suraparaju S.K.; Sofiah A.G.N.; Tak Y.C.; Pasupuleti J.; Samykano M.; Abed A.M.; Kiong T.S.; Soudagar M.E.M.
Journal of Thermal Analysis and Calorimetry , Vol. 149 (24), pp. 14643-14662
9 استشهاد Article English ISSN: 13886150
Institute of Sustainable Energy, Universiti Tenaga Nasional (The Energy University), Selangor, Jalan Ikram-Uniten, Kajang, 43000, Malaysia; Department of Physics, Saveetha School of Engineering, SIMATS, Chennai, 602105, India; Research Centre for Nano-Materials and Energy Technology (RCNMET), School of Engineering and Technology, Sunway University, No. 5, Jalan Universiti, Bandar Sunway, Selangor Darul Ehsan, Petaling Jaya, 47500, Malaysia; CoE for Energy and Eco-Sustainability Research, Uttaranchal University, Dehradun, India; Centre for Research in Advanced Fluid and Process, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuhraya Tun Razak, Gambang, Pahang, Kuantan, 26300, Malaysia; Solar Energy Laboratory, Department of Mechanical Engineering, Sri Vasavi Engineering College (A), Andhra Pradesh, Tadepalligudem, 534101, India; Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Pahang, Pekan, 26600, Malaysia; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; College of Engineering, Lishui University, Zhejiang, Lishui, 323000, China; Division of Research and Development, Lovely Professional University, Punjab, Phagwara, 144411, India; Centre of Research Impact and Outcome, Chitkara University, Punjab, Rajpura, 140417, India; Department of Mechanical Engineering, Graphic Era (Deemed to be University), Uttarakhand, Dehradun, 248002, India
Abstract: The concept of photovoltaic thermal (PVT) systems holds the potential to reduce global energy consumption by simultaneously generating electricity and heat. However, the widespread adoption of these systems is impeded by technical challenges, particularly the rise in panel temperature and constraints on operation during night hours. The present research aims to explore the effect of coolant flow rate and solar radiation on the electrical output and thermal output of PV, PVT, salt hydrate integrated PVT system (PVT-SH), and modified multi-walled carbon nanotubes infused salt hydrate integrated PVT (PVT-SHMM) systems. Additionally, the study examines the heat transfer analysis of a fabricated PVT system incorporated serpentine flow thermal absorber and modified multi-walled carbon nanotubes infused salt hydrate phase change materials (PCMs). In this experiment, water was used as a cooling fluid, with a flow rate of 0.008 to 0.023 kg s−1 and irradiation of 400 to 800 W m−2. The findings show that the thermophysical properties of formulated nanocomposite have significantly improved, and the thermal conductivity of nanocomposites improved up to 97.2% compared to pure salt hydrate. The pressure drops enhancement increases become more pronounced at the higher mass flow rate, primarily because of the outlet's elevated viscosity of the cooling fluid. As the water flow rate increases, the heat removal factor exhibited 1.06 times rise, with relatively lower values in turbulent flow regions than in laminar flow conditions. Furthermore, the investigation notes a substantial decrease in panel temperature, an increase in electrical power with higher flow rates, and a higher heat gain at lower flow rates. Thus, the experimental findings confirm that integrating SH and SHMM into the PVT system significantly enhances its performance, allowing stored heat energy to be utilized during periods of unavailable solar energy. © Akadémiai Kiadó, Budapest, Hungary 2024.
الكلمات المفتاحية: Energy Modified multi-walled carbon nanotubes Phase change materials Photovoltaic thermal systems Pressure drop
Cheng F.; Abed A.M.; Singh P.K.; Alghassab M.A.; Alhomayani F.M.; Turdialiyev U.; Abouzied A.S.; Elmasry Y.; Khan B.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 63
8 استشهاد Article Open Access English ISSN: 2214157X
Shandong Provincial University Laboratory for Protected Horticulture, Weifang University of Science and Technology, Weifang, 262700, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, U.P, Mathura, 281406, India; Electrical Engineering Department, College of Engineering, Shaqra University, Riyadh, 11911, Saudi Arabia; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Doctor of Technical Sciences, Department of Organic Chemistry, Rector, Andijan Machine-Building Institute, Bobur Avenue, 56, Andijan, Uzbekistan; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Hail, Hail, 81442, Saudi Arabia; Department of Mathematics - College of Science - King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Department of Electrical and Computer Engineering, Hawassa University, Hawassa, Ethiopia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Applied Science Research Center, Applied Science Private University, Amman, Jordan; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Center for Renewable Energy and Microgrids, Huanjiang Laboratory, Zhejiang University, Zhejiang, 311816, China
The principal aim of this article is to optimize the thermal and electrical efficiency of a geothermal combined heat and power system through metaheuristic particle swarm optimization (PSO) method. The objective of this research is to conduct a thorough analysis of the incorporation of metaheuristic PSO technique, with a specific emphasis on the potential advantages and obstacles associated with the utilization of metaheuristic approaches in improving the effectiveness of geothermal energy systems. The utilization of a double-flash geothermal system in conjunction with a transcritical carbon dioxide Rankine cycle is utilized for the co-generation of electricity and thermal energy. The research utilized a PSO method to enhance power generation, heating capacity, and overall system efficiency. The PSO algorithm was employed to determine the optimum operational parameters for a pressure level of 820 kPa and a pressure ratio of 1.59, leading to the maximization of power output to 2591.4 kW The PSO algorithm effectively identified the optimal operational parameters as a pressure of 820 kPa and a pressure ratio of 1.59, resulting in the achievement of a peak power output of 2591.4 kW. The methodology has determined that a pressure of 916.4 kPa and a pressure ratio of 1.5 represent the optimal parameters for achieving a maximum heating capacity of 12329.1 kW. © 2024 The Authors
الكلمات المفتاحية: Double-flash geothermal Heat energy Heat source PSO optimization Thermal analysis
Li J.; Song F.; Guo J.; Abed A.M.; Alghassab M.A.; Abdullaev S.; Khan M.N.; Hajri A.K.; Elmasry Y.; Mahariq I.
Process Safety and Environmental Protection , Vol. 190, pp. 1562-1574
8 استشهاد Article English ISSN: 09575820
School of Safety Engineering, North China Institute of Science and Technology, Langfang, 065201, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Electrical Engineering Department, College of Engineering, Shaqra University, Riyadh, 11911, Saudi Arabia; Senior Researcher, Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Senior Researcher, Scientific and Innovation Department, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Department of Mechanical and Industrial Engineering, College of Engineering, Majmaah University, Al-Majmaah, 11952, Saudi Arabia; Department of Chemistry, Alwajh College, University of Tabuk, Saudi Arabia; Department of Mathematics - College of Science - King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
By utilizing plastic waste as a feedstock for gasification and integrating a solid oxide fuel cell, this system has the potential to not only generate electricity and heat efficiently but also reduce environmental pollution by converting waste materials into valuable energy resources. This research explores a combined heat and power system that integrates polystyrene waste gasification with a solid oxide fuel cell technology. The study thoroughly examines and optimizes the system's performance through the application of response surface methodology. Higher steam to plastic waste ratio improves the power production (from 244.1 to 246 kW) and mitigates the emission (from 785.4 to 761.3 kg/MWs). Enhanced power (from 86.25 to 337 kW, representing an impressive improvement of approximately 291 %) and heating (from 172.6 to 275.3 kW, marking a substantial improvement of approximately 59.5 %) are achieved at higher current densities. At a current density of 3200–3600 A/m² and a temperature of 1020–1040 K, the system can achieve 200–240 kW power, 390–450 g/s heating value, and 840–860 kg/MWs emissions. Further optimization at a steam to plastic ratio of 0.95–1.1 and 1030–1040 K temperature can improve performance to 280–300 kW power, 580–600 g/s heating value, and 840–860 kg/MWs emissions. The study provides valuable insights into the potential benefits of integrating plastic waste gasification with solid oxide fuel cell technology, highlighting the importance of sustainable energy solutions in addressing environmental challenges. Moving forward, further research in this area could lead to the development of more efficient and environmentally friendly energy systems. © 2024 The Institution of Chemical Engineers
الكلمات المفتاحية: Environmental protection Plastic waste Response surface methodology Sustainable energy Waste-to-energy
Xue C.A.O.; Abed A.M.; Singh P.K.; Formanova S.; Elmasry Y.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 61
8 استشهاد Article Open Access English ISSN: 2214157X
School of Electrical and Information Engineering, Northeast Petroleum University, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, U.P., Mathura, 281406, India; Department of Chemistry and Its Teaching Methods, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Department of Mathematics - College of Science - King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
Supercritical carbon dioxide (sCO2) is widely acknowledged for its potential applications in various energy utilization systems, particularly in addressing the critical challenge of heat transfer. This study utilizes numerical simulation to model sCO2 flow within a microchannel heat sink (MCHS) equipped with porous substrates, aiming to evaluate both its thermal and hydraulic performance. The analysis investigates the influence of significant parameters such as shape, inlet temperature, Reynolds number, porous layer thickness, and operating pressure on key variables like pressure drop, Nusselt (Nu) number, thermal resistance, and Figure of Merit (FOM) within the microchannel. Findings reveal a progressive improvement in heat transfer efficiency, as demonstrated by Nu/Nu0, with rising inlet temperature. However, extending the inlet temperature beyond the critical threshold results in diminished Nu numbers across all models. Near the critical point (Tin = 305 K), the FOM reaches 3.59 for M1 (Model1) and 3.61 for M3, highlighting their effectiveness in balancing heat transfer enhancement and energy consumption. At each operating pressure, Nu undergoes a significant rise near the critical point, with the peak Nu notably observed at an operating pressure of 8 MPa, surpassing those at 9 MPa and 10 MPa due to the significantly higher heat capacity of the fluid at 8 MPa. Furthermore, the findings reveal a decreasing trend in FOM as porous thickness increases for the models, suggesting that utilizing porous inserts with smaller thickness values is more efficient when considering both heat transfer enhancement and required pumping power. All examined models successfully reduce thermal resistance, consistently maintaining values below those of non-porous MCHS across all Reynolds numbers. Additionally, increasing Reynolds number enhances heat transfer and reduces thermal resistance for all configurations. © 2024 The Authors
الكلمات المفتاحية: Figure of merit Microchannel heat sink Porous substrate Supercritical carbon dioxide Thermal resistance
Gasmi H.; Abed A.M.; Dutta A.K.; Alhomayani F.M.; Mahariq I.; Alturise F.; Alkhalaf S.; Alkhalifah T.; Elmasry Y.; Khan B.
Case Studies in Thermal Engineering , Vol. 63
8 استشهاد Article Open Access English ISSN: 2214157X
Department of Civil Engineering, College of Engineering, University of Hail, Hail, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Computer Science and Information Systems, College of Applied Sciences, AlMaarefa University, Ad Diriyah, Riyadh, 13713, Saudi Arabia; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Cybersecurity, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Computer Engineering, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Mathematics - College of Science - King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Department of Electrical and Computer Engineering, Hawassa University, Hawassa, Ethiopia; Center for Renewable Energy and Microgrids, Huanjiang Laboratory, Zhejiang University, Zhejiang, 311816, China; Department of Technical Sciences, Western Caspian University, Baku, Azerbaijan
This study offers an in-depth thermodynamic analysis and optimization of an integrated renewable energy system that merges a double-flash geothermal system with a transcritical carbon dioxide Rankine cycle, utilizing machine learning algorithms. The innovative design aims to maximize the concurrent generation of heat and electricity, ultimately benefiting environmental sustainability and energy security. By employing regression machine learning algorithms, the research evaluates and enhances system performance, achieving remarkable R-squared accuracy levels of 98.86 % for heating output and 99.89 % for power output predictions. The thermodynamic modeling, which has been validated against recognized benchmarks, confirms the accuracy of the system's design. Optimization findings indicate that operating pressures between 840 and 870 kPa and pressure ratios of 1.56–1.60 deliver optimal outputs, with power production between 2582 and 2585 kW and heating output ranging from 12260 to 12280 kW. The system reaches its maximum performance at a pressure of 850 kPa and a pressure ratio of 1.57, resulting in a power output of 2583.97 kW and a heating output of 12279.3 kW. These results highlight the potential of combining advanced thermodynamic systems with machine learning methodologies to improve the efficiency and effectiveness of renewable energy sources. © 2024 The Authors
الكلمات المفتاحية: Artificial intelligence Geothermal energy Integrated renewable system Machine learning Optimization
Abid Allah H N.; Sh. Alnasur F.; Abdulkadhim A.; Mejbel Abed I.; Mahjoub Said N.; Abed A.M.
Journal of Taibah University for Science , Vol. 18 (1)
8 استشهاد Article Open Access English ISSN: 16583655
College of Engineering, Al-Qasim Green University, Al Qasim, Iraq; College of Science, Al-Qadisiyah University, Al Diwaniyah, Iraq; Mechanical Engineering Department College of Engineering, University of Al-Qadisiyah, Al Diwaniyah, Iraq; Mechanical Engineering Department, College of Engineering, University of Babylon, Hillah, Iraq; Department of Physics, College of Science, King Khalid University, Abha, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Iraq
The present work focuses on investigating magnetohydrodynamic (MHD) natural convection in a complex I-shaped enclosure with corrugated walls, filled with nanofluid and porous media layers. This study analyzes various parameters' effects on heat transfer and fluid flow. The enclosure's left and right walls maintain low temperatures, while the other walls are insulated. The inner corrugated cylinder experiences high temperatures. The study examines the impact of Rayleigh number (Ra), Hartman number (Ha), nanofluid volume fraction (ϕ), Darcy number (Da), MHD inclination angle (γ), position of the corrugated cylinder (δ) and number of undulations (N) on isotherms, streamlines, velocity profiles and average Nusselt number variations. The results show that higher Ra values increase the average Nusselt number while increasing Da enhances it by 65%. Magnetic source inclination greatly affects heat transfer, with Nusselt at γ = 90° being 15.34 compared to 10.234 at γ = 0°. The study concludes that optimal heat transfer occurs at γ = 90°, Ra = 106, Da = 10−3, Ha = 30 and N = 2. © 2024 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.
الكلمات المفتاحية: CFD location of inner body Magnetic field Nusselt number undulation wavy
Tran Ngoc Huy D.; Iswanto A.H.; Catalan Opulencia M.J.; Al-Saikhan F.; Timoshin A.; Abed A.M.; Ahmad I.; Blinova S.A.; Hammid A.T.; Mustafa Y.F.; Van Tuan P.
Critical Reviews in Analytical Chemistry , Vol. 54 (4), pp. 857-871
8 استشهاد Retracted English ISSN: 10408347
MBA, Banking University HCMC, Ho Chi Minh City, Viet Nam; International University of Japan, Niigata, Japan; Public Health Department, Faculty of Health Science, University of Pembangunan Nasional Veteran Jakarta, Jakarta, Indonesia; College of Business Administration, Ajman University, Ajman, United Arab Emirates; Department of Clinical Pharmacy, College of Pharmacy, Prince Sattam Bin Abdulaziz University, Alkharj, Saudi Arabia; Department of Propaedeutics of Dental Diseases, I.M. Sechenov First Moscow State Medical University (Sechenov University), Moscow, Russian Federation; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Department of Clinical Laboratory Sciences, College of Applied Medical Sciences, King Khalid University, Abha, Saudi Arabia; Department of Histology, Embryology, and Cytology, Samarkand State Medical Institute, Samarkand, Uzbekistan; Computer Engineering Department, Imam Ja’afar Al-Sadiq University, Baghdad, Iraq; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Mosul, Mosul, Iraq; National Economics University (NEU), Hanoi, Viet Nam
Early diagnosis of hepatocellular carcinoma (HCC), a leading cause of cancer mortality, is decisive for successful treatment of this type of cancer and increasing the patients’ survival rate. Alpha-fetoprotein (AFP) is a glycoprotein that has been currently employed as a potential serological biomarker for determination of HCC and several other cancers. Achieving highly sensitive and specific detection of this biomarker is an effective strategy to inhibit developing issues caused by the cancer. Though, traditional procedures cannot meet the requirements due to the technical drawbacks. Recently, growing number of aptamer-based biosensors (aptasensors) attracted important attention as superior diagnostic tools because of their unique properties such as high stability, target versatility and remarkable affinity and selectivity. Nanomaterials, which broadly employed in the structure of these aptasensors, can considerably enhance the detection limit and sensitivity of analytes determination. Therefore, this review selectively investigated the recent progresses in several different optical and electrochemical aptasensors and nano-aptasensors designed for AFP assay. © 2022 Taylor & Francis Group, LLC.
الكلمات المفتاحية: aptamer aptasensing biosensor cancer biomarker α-fetoprotein
Zhou X.; Abed A.M.; Abdullaev S.; Lei G.; He L.; Li X.; Elmasry Y.; Mahariq I.
Energy , Vol. 309
7 استشهاد Article English ISSN: 03605442
School of Mathematics, Physics and Optoelectronic Engineering, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Department of Science and Innovation, Tashkent State Pedagogical University Named After Nizami, Tashkent, Uzbekistan; College of Mechanical Engineering, Hubei University of Automotive Technology, Hubei, Shiyan, 442002, China; School of Economics and Management, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Department of Mathematics, College of Science, King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
This study explores the integration of solar energy via parabolic trough collectors (PTC) with the Goswami cycle, focusing on evaluating life cycle costs (LCC) and energy performance in both steady-state and transient conditions. A suitable system configuration of a single-turbine Goswami cycle is designed for integration with PTC. Then, in the system's steady-state, a parametric study is performed based on the change in the design components. Subsequently, a multi-objective optimization method using energy and lifetime cost objectives are defined to identify the best system performance. This optimization technique utilizes artificial neural network (ANN) and the grey wolf optimizer (GWO) algorithm. Accordingly, the transient performance of the system is investigated during its optimal operating point using the TRNSYS software. Suitable controllers are considered for regulating power production and cooling system. Annual transient performance graphs of the systems are obtained. Following these investigations, a novel multi-turbine system is proposed. This configuration aims to enhance system reliability and diminish the reliance on storage devices by optimizing performance. The proper configuration of the five-turbine system with the required controllers is also provided. Hence, the method of dividing the turbine into similar turbines with lower capacity is a new concept proposed in this study. In the optimal state, it is observed that for 100 kW of net power output, 161 kW of effective cooling load can be achieved. At this configuration, the system's LCC amounts to 2.91 M. Moreover, during transient operation, an average power of 90 kW is attainable with a cooling load of 120 kW. The findings indicate that modifying the system from single turbine to five-turbines incurs an additional cost of approximately 9.2 % and reduces power output by 6 %. However, this modification significantly mitigates the transient impact of solar fluctuations. © 2024 Elsevier Ltd
الكلمات المفتاحية: Artificial neural network Life cycle cost Modified configuration Parabolic trough collectors Solar energy Transient analysis
Abouzied A.S.; Samad S.; Abed A.M.; Shaban M.; Alhomayani F.M.; Shomurotova S.; Safi M.S.; Ghandour R.; Elmasry Y.; Alrawashdeh A.I.
Case Studies in Thermal Engineering , Vol. 64
7 استشهاد Article Open Access English ISSN: 2214157X
Department of Pharmaceutical Chemistry, College of Pharmacy, University of Hail, Hail, 81442, Saudi Arabia; Management Department, College of Business Administration, Princess Nourah Bint Abdulrahman University, Riyadh, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Physics, Faculty of Science, Islamic University of Madinah, Madinah, 42351, Saudi Arabia; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Department of Chemistry Teaching Methods, Tashkent State Pedagogical University Named After Nizami, Bunyodkor Street 27, Tashkent, Uzbekistan; Faculty of Computer Science Department of IT, Allamah University, Kabul, Afghanistan; College of Engineering and Technology, American University of the Middle East, Egaila, 54200, Kuwait; Department of Mathematics, College of Science, King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Department of General Subjects, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Chemistry and Chemical Technology, College of Science, Tafila Technical University, Tafila, 66110, Jordan
As the global energy demand continues to rise, there is an urgent need to improve the efficiency and sustainability of power generation systems. This study integrated a modified supercritical carbon dioxide (S-CO2) and multi-effect desalination (MED) units to recover residual heat from a gas turbine cycle (GTC) in two stages, significantly enhancing electricity production while reducing the environmental footprint of the GTC. The significance of this study lies in its comprehensive approach, combining thermodynamic, environmental, and thermoeconomic analyses alongside thorough sensitivity evaluations. A triple optimization framework was implemented to optimize the system's performance, focusing on key metrics such as exergy efficiency, CO2 reduction rates, and levelized energy cost, utilizing the NSGA-II and the TOPSIS decision-making method in MATLAB software. Economic viability was assessed through a net present value (NPV) analysis, demonstrating substantial profitability. Finally, a comparison study of the devised system CO2 emissions rate was performed for different renewable energy sources. A specific application of the devised system is its capacity to generate 1.415 m³/h of distilled water while generating 1441 kW of electricity. Sensitivity analysis identified the combustion chamber temperature as the most critical design parameter, with a sensitivity index of 0.328. The optimum economic indicators showed marked improvement, with the NPV increasing from 2.371 M$ to 10.75 M$ and the payback period decreasing from 13.28 years to 7.18 years. © 2024 The Authors
الكلمات المفتاحية: Economic profitability Gas turbine Heat recovery Modified S-CO<sub>2</sub> cycle Multi-aspect optimization Thermal energy application
Ye J.; Abed A.M.; Chauhan B.S.; Salah B.; Hanifeh Dokht S.; Deifalla A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 57
7 استشهاد Article Open Access English ISSN: 2214157X
Guangdong Polytechnic of Environmental Protection Engineering, Guangdong, Foshan, 528216, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Uttar Pradesh, Mathura, India; Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam; Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
Currently, with the energy crisis, combined heat and power systems provide significant advantages. A spiral heat exchanger (SHE) is among the greatest components utilized in these kinds of systems. There are a few notable failure modes (FMs) that can lower the output of these devices. In this case, the risk priority number (RPN) in the form of a suitable approach as Extended RPN (E-RPN) is used to detect the failure modes priorities. This is done to achieve the effects of the FMs on system proficiency and to represent a suitable approach. The Best-Worst Method (BWM) is used to attain the risk factor weights. Ultimately, to demonstrate the effectiveness of the unique suggested strategy, the linear functions pertaining to the primary failure mechanism are extracted for fundamental parameters including the friction factor, Nusslet number, and system productivity. © 2024 The Authors
الكلمات المفتاحية: BWM Cost performance index Failure modes RPN Spiral heat exchanger
Dai J.; Guang Yue G.X.; Yuan Q.; Abed A.M.; Mouldi A.; Loukil H.; Deifala A.; Chen Y.
Case Studies in Thermal Engineering , Vol. 59
6 استشهاد Article Open Access English ISSN: 2214157X
College of Business, Jiaxing University, China; Institute for Advanced Studies, University of Malaya, Malaysia; Middlesex University Business School, NW4 2BT, United Kingdom; Department of Computer Science and Engineering, European University Cyprus, Nicosia, Cyprus; School of Management, Hunan Institute of Engineering, Hunan, Xiangtan, 411104, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, Hillah, 51001, Iraq; Al -Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Electrical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Full Professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Institute of Research and Development, Ton Duc Thang University, Viet Nam
This research delves into the cutting-edge realm of solar-powered dual-temperature refrigeration, adhering to the 3E model emphasizing Energy, Economic, and Environmental considerations with a key focus on financial optimization. The study investigates the implementation of advanced refrigeration technologies, notably the integration of supercritical CO2 and ammonia cycles, tailored for dual-temperature applications. A distinctive aspect of this research is the strategic use of excess thermal energy, enhancing the efficiency of the refrigeration systems under varied climatic conditions. Central to the study is a thorough economic analysis aimed at reducing the Levelized Cost of Cooling (LCOC), while simultaneously enhancing the overall efficiency of the system. With the aid of the Engineering Equation Solver (EES) software, the system is modeled and the preliminary results indicate a promising decrease in cooling expenses (reaching to 90.25 $/GJ) alongside an increase in system efficiency (an improved efficiency of 33.17 %), with the total Coefficient of Performance (COP) demonstrating a significant advancement over traditional refrigeration models. This research underscores the effectiveness of harnessing solar energy in refrigeration technologies, contributing to financially viable and environmentally responsible cooling solutions. It provides valuable insights for the future development of refrigeration systems, which are both economically and environmentally sustainable. © 2024 The Authors
الكلمات المفتاحية: 3E economic analysis Cost-effective sustainable solutions Dual-temperature cooling Financially efficient Supercritical CO<sub>2</sub>
Almensoury M.F.; Al-Srayyih B.M.; Al-Amir Q.R.; Hamzah H.K.; Abed A.M.; Ali F.H.; Bayraktar S.; Arıcı M.; Hatami M.
Numerical Heat Transfer; Part A: Applications , Vol. 85 (13), pp. 2069-2095
6 استشهاد Article English ISSN: 10407782
Department of Mechanical Engineering, College of Engineering, University of Al-Qadisiyah, Diwaniyah, Iraq; Department of Mechanical Engineering, College of Engineering, Babylon University, Iraq; Department of Air Conditioning and Refrigeration Techniques Engineering, Al-Mustaqbal University College, Babylon, Iraq; Department of Marine Engineering, Faculty of Naval Architecture and Maritime, Yildiz Technical University, Istanbul, Turkey; Department of Mechanical Engineering, Faculty of Engineering, Kocaeli University, Turkey; Department of Mechanical Engineering, Esfarayen University of Technology, North Khorasan, Iran
The control and improvement of heat transfer in enclosures is very important in several engineering applications. In the current two-dimensional numerical study, the mixed convection and entropy generation of water flowing inside a square vented enclosure that contains four vibrating cylinders with relatively low frequencies fr = 1, 2, 3, 5 Hz in the vertical and horizontal directions are reported. The effects of Reynolds and Richardson numbers, vibration frequency, vibration amplitude, and the direction of the cylinders’ vibration on heat transfer and entropy generation are presented for various cases. The horizontal walls of the enclosure are kept adiabatic while the vertical left and right walls are hot and cold, respectively. The linear regression analysis was used to reveal the rate of increase in the Nusselt number with the Reynolds and Richardson numbers number for each cases. Series of analyses show that the existence and the vibration of the cylinders increases heat transfer but the vibration in the horizontal direction is more effective since the top and bottom walls of the enclosure are adiabatic. It is found that the entropy generation due to heat transfer is low at the center of the enclosure. The direct relationship between the heat transfer and both Reynolds and Richardson numbers is reported. In terms of heat transfer, it is found that the critical vibration frequency and amplitude are fr = 4 and A = 0.05L and 0.075L. © 2023 Taylor & Francis Group, LLC.
الكلمات المفتاحية: Entropy generation mixed convection oscillated heater vented enclosure
Fayad M.A.; Mohammed A.; Mahdi R.R.; Hussain H.A.; Omran S.H.; Abed A.M.
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences , Vol. 119 (1), pp. 134-145
6 استشهاد Article Open Access English ISSN: 22897879
Energy and Renewable Energies Technology Center, University of Technology-Iraq, Baghdad, Iraq; Department of Electromechanical Engineering, University of Technology-Iraq, Baghdad, Iraq; Advance Welding Solutions Company Ltd, Baghdad, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
In recent research, further studies on the measurement and analysis of particulate morphology have become necessary to decrease the negative effect of particulate (PM) characteristics. The influence of Coconut biodiesel (CB100) and rates of EGR technique on morphological characteristics of PM was studied using CI diesel engine. The results showed that the PM size distribution decreased by 36.27% from CB100 combustion in comparison with diesel for different EGR rates. Furthermore, introduce high rate of EGR contribute in increasing the PM formation by 26.48% from the CB100 combustion compared with absence EGR technique. It is indicated that the number of particulates significantly decreased by 42.35% when the engine fed with CB100 compared to the diesel. The presence EGR technique leads to decrease the radius of gyration (Rg) and diameter of soot particles by 31.75% and 27.38%, respectively, for both fuels; this trend is more clearly with CB100 combustion. The fractal dimension (Df) declined as the EGR rate increasing during the burning of CB100 by 44.93% in comparison with neat diesel. For both fuels, the presence 40% of EGR increased the fractal dimension by 1.76 and 1.97 from CB100 and diesel, respectively, compared to the absence EGR. © 2024, Semarak Ilmu Publishing. All rights reserved.
الكلمات المفتاحية: Coconut biodiesel EGR rate particulate matter soot morphology soot particles
Togun H.; Ben Hamida M.B.; Hussein A.K.; Abed A.M.; Hasan H.A.; Homod R.Z.; Abdulrazzaq T.; Yaseen Z.M.; Biswas N.; Alhassan M.S.
Journal of Thermal Analysis and Calorimetry , Vol. 149 (7), pp. 3043-3057
5 استشهاد Article English ISSN: 13886150
Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Department of Chemical Engineering, College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh, Saudi Arabia; Research Laboratory of Ionized Backgrounds and Reagents Studies (EMIR), Preparatory Institute for Engineering Studies of Monastir (IPEIM), University of Monastir, Monastir City, Tunisia; Higher School of Sciences and Technology of Hammam Sousse (ESSTHS), University of Sousse, Sousse City, Tunisia; Mechanical Engineering Department, College of Engineering, University of Babylon, Babylon City, Hilla, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Electromechanical Engineering Department, University of Technology, Baghdad, 10066, Iraq; Department of Studies, Ministry of Higher Education & Scientific Research, Baghdad, Baghdad, 10011, Iraq; Department of Oil and Gas Engineering, Basra University for Oil and Gas, Basra, Iraq; Department of Chemical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Civil and Environmental Engineering Department, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia; Interdisciplinary Research Center for Membranes and Water Security, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India; Division of Advanced Nano Material Technologies, Scientific Research Center, Al-Ayen University, Thi-Qar, Iraq
Modifying the geometrical structures is a potential strategy that targets the compactness of any new devices in order to produce greater cooling performance. The heat transfer enhancement over a BFS with unique square-rectangular ribs as FFS in a two-dimensional channel is investigated numerically in this study. Each of the structures features a pair of square-rectangular adiabatic ribs, and both its height and width are adjustable. The ribs are positioned uniformly on the bottom wall heated with uniform heat flux. The impacts of varying number as well as space in between the pair of ribs are also analyzed. Fresh external fluid is entering into the channel from the left and leaving the channel from the right. The methods of solution of the mathematical models are solved numerically following the finite element method along with the Galerkin technique. Through the rigorous computation, the results are obtained and presented systematically over wide range of parametric variations like: with height and width of square-rectangular ribs, space between each pair of ribs, number of ribs, heat flux strength, and flow Reynolds number. In order to compare the thermal performance of BFS with ribs structure, the case of no-ribs channel is also investigated. The results indicate that geometric parameters have major influences on the thermo-fluid flow as well as heat transfer characteristics. It is found that lesser number of ribs with moderate height and width with lesser spacing corresponds to the superior thermal performance compared to no-ribbed channel. Furthermore, lower number of ribs with higher height and width with higher spacing resembles to the worst thermal performance. © Akadémiai Kiadó, Budapest, Hungary 2024.
الكلمات المفتاحية: Backward-facing step (BFS) Comsol multiphysics Flow separation Forward-facing step (FFS) Heat transfer Ribs channel
Abdulkadhim A.; Hamzah H.K.; Hamza N.H.; Al-Farhany K.; Ali F.H.; Abed I.M.; Said N.M.; Abed A.M.
Journal of Thermal Analysis and Calorimetry , Vol. 149 (4), pp. 1535-1563
5 استشهاد Article English ISSN: 13886150
Mechanical Engineering Department, University of Al-Qadisiyah, Al-Qadisiyah, 58001, Iraq; Mechanical Engineering Department, College of Engineering, Babylon University, Babylon, Iraq; Department of Physics, College of Science, King Khalid University, Abha, 61413, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq
The current study investigates the influence of MHD on the natural heat transfer considering the irreversibility in a complex-shaped cavity with the existence of inner roundish heater with four attached fins utilizing finite element formulation. Three different cases are considered to figure out the major characteristics of temperature, stream function and total generated entropy, Nusselt number in addition to Bejan number. Concentrated attention is directed to the enclosure geometry modifications and the varied length of attached fins and their impacts. The parameters of study are ranged as follows; Rayleigh number 103≤Ra≤106, Hartmann number 0≤Ha≤60, fins’ length 0.1≤H≤0.3. The novelty of the present work is on studying all of these parameters in the complex enclosure considering three different cases of the shape of the outer walls so that the star-shaped enclosure is classified as case 1. With increasing the length that separated between the outer arc of the star enclosure, the octagonal-shaped enclosure will appear as denoted in case 2 and 3. It had been seen that at low Rayleigh number Ra=104, case one is the best choice in heat transfer bettering while it is the lowest case at high Rayleigh number Ra=106. Additionally, the influence of Hartmann number on the total entropy generation reduction percentage for case three is 63.57% while it is 51.11% for case two while Hartmann number had negligible impact of entropy generation reduction for case one. Lastly, the highest Bejan number is at fin length H=0.3 is recorded for case one. © Akadémiai Kiadó, Budapest, Hungary 2023.
الكلمات المفتاحية: Complex shape Entropy generation Hybrid nanofluid Magnetic field
Abed A.M.; Chauhan B.S.; Mansir I.B.; Ayed H.; Mouldi A.; Zehforoosh A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 59
5 استشهاد Article Open Access English ISSN: 2214157X
Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al-Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Uttar Pradesh, Mathura, India; Department of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Centre for Energy Research and Training, Ahmadu Bello University, P.M.B 1045, Zaria, Nigeria; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
Entropy generation and convection heat transfer in a partially porous chamber with different side wall temperatures using CuO–H2O have been investigated. The importance of this issue is wide application of the results in solar collectors, thermal extrusion systems, heat exchangers, bio-medicine, nuclear waste disposal, etc. The innovation of the present work is related to the investigation of fluid and heat fields and entropy generation by using a matrix with subordination of porosity to the vertical axis and permeability, thermal conductivity, and viscosity with subordination of porosity. To obtain accurate results, the two-phase mixture model was used, and thermal conductivity and viscosity of nanofluid were simulated by experimental models by temperature and volume fraction dependence. Governing equations are solved by the FVM. The main findings indicate that the best and worst optimization factor will occur in the porous matrix ε = ε(y2) and ε = -ε(y2), respectively, which is 113 % and 86 % of NH of the homogeneous matrix, respectively. Also increasing the filling of the cavity, highly improves NH, so that the NH will reach from 1.19 to 1.82 with the increase of S from 0.25 to 1. © 2024
الكلمات المفتاحية: Entropy generation rate Heterogeneous porous matrix Natural convection Optimization factor Partially porous cavity Two-phase mixture Variable properties
Bouzgarrou S.M.; Farouk N.; Abed A.M.; Khalil S.A.; Dahari M.; Abdullaev S.; Alhomayani F.M.; Mahariq I.; Alharbi F.S.; Islam S.
Process Safety and Environmental Protection , Vol. 188, pp. 177-192
4 استشهاد Article Open Access English ISSN: 09575820
Civil Engineering Department, College of Engineering, Jazan University, P.O. Box. 706, Jazan, 45142, Saudi Arabia; Mechanical Engineering Department, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Mechanical Engineering Department, Faculty of Engineering, Red Sea University, Port Sudan, Sudan; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of chemistry, Alwajh college, University of Tabuk, Tabuk, Saudi Arabia; Deparment of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; Senior Researcher, Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Senior Researcher, Scientific and Innovation Department, Tashkent State Pedagogical University named after Nizami, Tashkent, Uzbekistan; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Mechanical Engineering, College of Engineering, University of Hafr Al Batin, P.O. Box 1803, Hafr Al Batin, 39524, Saudi Arabia; Civil Engineering Department, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Higher Institute of Applied Sciences and Technologie of Sousse, Sousse University, Tunisia
The use of biomass as a renewable source for biohydrogen production offers both environmental and economic advantages. A novel multi-generation system has been developed and modeled to generate biohydrogen, along with other energy outputs such as hydrogen storage, power, hot water, and hot air. This integrated system incorporates a gas turbine cycle, a proton exchange membrane, and a supercritical carbon dioxide Brayton cycle. After validating the model, the performance of the systems fueled by olive refuse and wheat straw biomasses has been evaluated. The system using wheat straw biomass produces more biohydrogen (39 g/min compared to 33 g/min), oxygen (307 g/min compared to 260 g/min), and power (316 kW compared to 268 kW). Conversely, the system using olive refuse biomass emits lower carbon dioxide (8.38 g/kWmin compared to 8.94 g/kWmin) and provides higher efficiency (76.8 % compared to 65.9 %). These findings demonstrate the versatility of the novel multi-generation system in harnessing different biomass types for biohydrogen production and other energy applications, while balancing environmental and economic considerations. © 2024 The Institution of Chemical Engineers
الكلمات المفتاحية: Biohydrogen production Biomass utilization Comparative analysis Environmental protection Renewable energy
Wang S.; Lin H.; Abed A.M.; Mahariq I.; Ayed H.; Mouldi A.; Lin Z.
Energy , Vol. 308
4 استشهاد Retracted English ISSN: 03605442
College of Chemistry Biology and Environment, Yuxi Normal University, Yunnan, Yuxi, 653100, China; Yuxi Normal University, Yunnan, Yuxi, 653100, China; Mechanical power Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al -Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Guangzhou College of Commerce, Guangzhou, China
Biowaste-to-biogas processes have been introduced to design a valuable and green renewable plant to achieve a sustainable society and environment. The biomethane production process through biogas upgrading instead of designing a combined heat and power (CHP) system can be more attractive. This study presents a life cycle analysis (LCA) from both cost and environmental standpoints for four biowaste-to-biogas/biomethane process scenarios. Biogas production is achieved through anaerobic co-digestion of the organic fraction of municipal solid waste (OF-MSW) and secondary sewage sludge (S-SS), incorporating a pre-treatment process based on the dark co-fermentation process (DCFP). Each scenario offers distinct methods for utilizing the hydrogen-rich gas and biogas, with varying degrees of energy recovery and efficiency. Two sensitivity studies were conducted under various utilizations of the recovered biomethane and the anticipated electricity mix. Scenario SC-1 (CHP-from-biogas) was found to be the most co-friendly favorable in eight out of eleven impact categories (under the CML/IA technique). Further, biogas upgrading-integrated options exhibited lower impacts. Replacing biomethane instead of petrol in scenarios with upgraded biogas was identified as the most effective approach against climate change. Financial analysis indicated that all layouts are economically viable, each demonstrating a positive NPV over a 20-year period (up to $11.57 million). © 2024 Elsevier Ltd
الكلمات المفتاحية: Anaerobic Co-Digestion process Biomethane Biowaste CHP Life cycle analysis Life cycle cost analysis
Luo J.; Abed A.M.; Salah B.; Chohan M.K.; Yajid M.S.A.; MGM J.; Chen Y.
Process Safety and Environmental Protection , Vol. 190, pp. 1273-1289
4 استشهاد Article English ISSN: 09575820
School of Mechanical Engineering, Xijing University, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia; Department of Computer Science and Engineering, Faculty of Engineering and Technology, Jain (Deemed-to-be) University, Karnataka, Bengaluru, India; Department of Computer Science and Engineering, Vivekananda Global University, Jaipur, India; Management and Science University, Malaysia; Institute of Research and Development, Ton Duc Thang University, Viet Nam
The primary objective of the current research is to speed up the shift towards a carbon-neutral economy and reduce our reliance on fossil fuels by developing a novel, highly efficient, environmentally friendly, and economically feasible multi-generation system based on solar-biomass hybridization. The essential element of this concept involves the introduction of green hydrogen into the combustion chamber, aiming to enhance the quality of the incineration products and facilitate the implementation of a waste-to-power Rankine cycle. The practicality of the suggested model is compared with a system that does not incorporate hydrogen injection. As a part of artificial intelligence, a neural network model integrated with the grey wolf optimizer is applied to ascertain the most optimal energy conversion/management condition with reduced computational time. The results show that the injection of additional hydrogen exhibits superior performance compared to the base system from all facets. The optimization achieves higher exergy efficiency and drinkable water production of 8.7 % and 27.9 kg/s while reducing the total cost and emission index of 13.7 $/h and 410.7 kg/GWh. The results indicate that the combustion chamber and steam generator are the poorest parts in terms of exergy under ideal conditions. Potential future directions of this work are to explore alternate techniques for generating hydrogen and perform regional evaluations to comprehend the accessibility and fluctuation of biomass and solar resources in various geographical areas. © 2024 The Institution of Chemical Engineers
الكلمات المفتاحية: Biomass Clean energy Hydrogen MED Multi-objective optimization PV panel Renewable hybridization
Guo X.; Abed A.M.; Alghassab M.A.; Alhomayani F.M.; Mahariq I.; Elmasry Y.; Safi M.S.; Alturise F.; Alkhalaf S.; Alrawashdeh A.I.
Case Studies in Thermal Engineering , Vol. 63
4 استشهاد Article Open Access English ISSN: 2214157X
College of Electrical and Electronic Engineering, The University of Western Australia, 6009, WA, Australia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Electrical Engineering Department, College of Engineering, Shaqra University, Riyadh, 11911, Saudi Arabia; College of Computers and Information Technology, Taif University, Saudi Arabia; Applied College, Taif University, Saudi Arabia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Mathematics - College of Science - King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Faculty of Computer Science Department of IT, Allamah University, Kabul, Afghanistan; Department of Cybersecurity, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of Computer Engineering, College of Computer, Qassim University, Buraydah, Saudi Arabia; Department of General Subjects, College of Engineering, University of Business and Technology, Jeddah, 21361, Saudi Arabia; Department of Chemistry and Chemical Technology, College of Science, Tafila Technical University, Tafila, 66110, Jordan
This study aims to develop an environmentally friendly multi-energy system for sustainable production of electricity, cooling and hydrogen. The study introduces a pioneering geothermal-based system, integrating an ejector refrigeration cycle, a dual-loop organic Rankine cycle, and a hydrogen production unit with proton exchange membrane electrolyzers. The study provides a thorough analysis of the system's energy and exergy performance, as well as its economic feasibility. Through sensitivity and parametric analyses, the research identifies key parameters that significantly influence system performance. The system's innovative design promises minimal environmental impact while delivering multifaceted performance: generating 1.38 MW of electricity, supplying 436 kW of cooling load, and producing 5.39 kg/h of hydrogen. In the exergy analysis, Evaporator1 is identified as the primary contributor to exergy loss, representing 34 % of the total exergy destruction. This is followed by the electrolysis unit, the condenser, and the ejector refrigeration cycle, which contribute 18 %, 14 %, and 12 %, respectively. The system achieves optimal efficiency at an organic Rankine cycle turbine1 inlet temperature of 387 K, yielding a power generation of 885.4 kW and an exergy efficiency of 26.7 %. Beyond this temperature, any further increase leads to a decline in power output due to operational disturbances. A multi-criteria optimization using genetic algorithm is applied, resulting in an optimized system with a cost rate of 18.13 $/h and an exergy efficiency of 38.96 %. © 2024 The Authors
الكلمات المفتاحية: Artificial Intelligence Energy conversion Energy efficiency Geothermal energy system Multi-generation system Optimization
Taha Z.K.; Paw J.K.S.; Tak Y.C.; Kiong T.S.; Kadirgama K.; Benedict F.; Ding T.J.; Ali K.; Abed A.M.
IEEE Access , Vol. 12, pp. 186277-186295
3 استشهاد Article Open Access English ISSN: 21693536
Universiti Tenaga Nasional, The Energy University, College Of Graduate Studies (COGS), Kajang, 43000, Malaysia; Al-Iraqia University, Faculty Of Engineering, Department Of Network, Baghdad, Iraq; Universiti Tenaga Nasional, The Energy University, Institute Of Sustainable Energy, Kajang, 43000, Malaysia; Universiti Malaysia Pahang, Faculty Of Mechanical And Automotive Engineering Technology, Pahang, Pekan, 26600, Malaysia; Almaaqal University, College Of Engineering, Basra, 61003, Iraq; Enhance Track Sdn. Bhd., Selangor, Puchong, 47120, Malaysia; Xiamen University Malaysia, School Of Electrical Engineering And Artificial Intelligence, Selangor, Sepang, 43900, Malaysia; University College Tati, Faculty Of Engineering Technology (Electrical And Automation), Terengganu, Kemaman, 24000, Malaysia; Al-Mustaqbal University, College Of Engineering And Technologies, Babylon, 51001, Iraq
Federated learning is increasingly being considered for sensor-driven human activity recognition, offering advantages in terms of privacy and scalability compared to centralized methods. However, challenges such as feature selection and client imbalanced data persist. In this study, FLP-DS2MOTE-USA is suggested, a system that integrates federated local preprocessing, adaptive thresholding based on uncertainty symmetry, and a density- sensitive synthetic minority over-sampling approach. Each client preprocesses data locally and employs DS2MOTE for class balancing. On the server side, adaptive thresholding based on uncertainty symmetry is utilized to identify the optimal client for training the global mode. Evaluation on two distinct datasets - Human Activity Recognition with Smartphones and Human Activity Recognition (OpenPose) - reveals that our model outperforms FedAvg, FedSgd, FedSmote, and FedNova, achieving accuracies of 90.57% and 96.58%, respectively. In addition, FLP-DS2MOTE-USA minimizes update size and network overhead on the Human Activity Recognition with Smartphones, while achieving improvements on the OpenPose dataset. Overall, the proposed method not only addresses issues of imbalanced data but also reduces computational complexity via streamlined local preprocessing, and server-side mechanisms ensure client privacy. It outperforms traditional federated learning techniques in both accuracy and efficiency. © 2013 IEEE.
الكلمات المفتاحية: Federated learning imbalance data local preprocessing uncertainty symmetry
Ji C.; Abed A.M.; Zhou X.; Lei G.; He L.; AlAbdulaal T.H.; Abdullaeva B.; Safi M.S.
Case Studies in Thermal Engineering , Vol. 64
3 استشهاد Article Open Access English ISSN: 2214157X
School of Economics and Management, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; School of Mathematics, Physics and Optoelectronic Engineering, Hubei University of Automotive Technology, Hubei, Shiyan, 442000, China; College of Mechanical Engineering, Hubei University of Automotive Technology, Hubei, Shiyan, 442002, China; Laboratory of Nano-Smart Materials for Science and Technology (LNSMST), Physics Department, King Khalid University, P.O.Box 9004, Abha, Saudi Arabia; Department of Mathematics and Information Technologies, Vice-Rector for Scientific Affairs, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Faculty of Computer Science, Department of IT, Allamah University, Kabul, Afghanistan
This study introduces an innovative system for combined cycle power plants that significantly enhances efficiency and sustainability through advanced heat recovery techniques. By integrating various cycles and units, including the Brayton, Rankine, and Kalina cycles, along with a thermoelectric generator, proton exchange membrane electrolysis hydrogen production unit, and RO desalination unit, the proposed system optimizes performance across multiple dimensions. Multi-objective optimization, employing a genetic algorithm, ensures optimal system performance in terms of energy, exergy, economics, and environmental impact. The novelty of this research lies in its comprehensive approach to combining power generation with water desalination and hydrogen production, thereby addressing multiple energy and environmental challenges simultaneously. The thermodynamic analysis confirms the system's capability to deliver 1.45 MW of electrical power and produce 3.24 kg/h of hydrogen, with a unit cost of production (UCOP) of 10.24 cents/kWh. Key findings highlight the significant impact of gas turbine inlet temperature on system cost and efficiency, and the trade-offs involved in optimizing pressure ratios for peak performance. The optimized system demonstrates an exergy efficiency of 37. 6 % at a cost rate of 57. 2 $/h. The integrated approach not only increases power generation capacity but also enables the production of hydrogen fuel and fresh water, showcasing technological advancements with significant practical applications. The potential prospects of this research include its application in various industrial sectors, contributing to sustainable energy solutions and environmental conservation. © 2024 The Authors
الكلمات المفتاحية: Gas turbine Heat energy Heat re-process Multi-production system Thermal analysis Thermoelectric
Zhang L.; Wang X.; Abed A.M.; Yin H.; Abdullaev S.; Fouad Y.; Dahari M.; Mahariq I.
Energy , Vol. 308
3 استشهاد Article English ISSN: 03605442
College of Wealth Management, Ningbo University of Finance and Economics, Ningbo, 315175, China; China Communication Construction Company Ltd., Beijing, 100088, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; School of Finance and Trade, Wenzhou Business College, Wenzhou, China; Faculty of Chemical Engineering, New Uzbekistan University, Tashkent, Uzbekistan; Scientific and Innovation Department, Tashkent State Pedagogical University, Tashkent, Uzbekistan; Department of Applied Mechanical Engineering, College of Applied Engineering, Muzahimiyah Branch, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia; Deparment of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
The present research presents an innovative thermal integration model for a biomass-based power plant to generate power, coolant, and liquefied hydrogen. This integrated arrangement comprises biomass gasification, gas turbine cycle, organic flash-bi-evaporator refrigeration cycle, multi-effect desalination, solid oxide electrolyzer, and Claude cycle. The selection of an eco-friendly fluid for the electricity-cooling production cycle is conduced relying on a comparative analysis. The subsequent examination evaluates the economic-sustainability performance criteria through sensitivity and contour analyses. The comparative assessment identifies R1234ze(Z) as the most suitable working fluid. Four objective functions are scrutinized, and two optimization scenarios are devised based on a machine learning approach using artificial neural networks and a multi-objective gray wolf optimization technique. In Scenario A, the focused objectives are the total destructed exergy and the cost of producing liquefied hydrogen. Meanwhile, Scenario B integrates the sustainability index and the overall system cost rate as primary criteria. Scenario A exhibits more favorable operational conditions and outcomes than scenario B, showing the objectives mentioned as 9955 kW and 3.25 $/kg, respectively. In this scenario, the sustainability index, the overall investment cost rate, and the net present value are obtained to be 1.74, 236 $/h, and 205 M$, correspondingly. © 2024 Elsevier Ltd
الكلمات المفتاحية: Biomass combustion Economic assessment Liquefied hydrogen Machine learning approach Sustainability analysis Working fluid selection
Yao D.; Abed A.M.; Chauhan B.S.; Salah B.; Patil N.; Bagheri M.; Deifalla A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 56
3 استشهاد Article Open Access English ISSN: 2214157X
PingDingShan Vocational and Technical College, He'nan, Pingdingshan, 467000, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Uttar Pradesh, Mathura, India; Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Karnataka, Bangalore, India; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam; Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
Compact heat exchangers have several benefits over other types of heat exchangers, including compactness, a high surface area to volume ratio, and a low-temperature differential. They are frequently employed in the heat integrating process. Herein, a compact heat exchanger is simulated in a steady state using the AnsysFluent 17.2 software pack. The flow regime is laminar and water enters the exchanger at a temperature of 298.15 K, assuming a constant wall temperature condition. This study examines the effects of wall wave formation on fluid flow and heat transfer characteristics. The two parameters, wave altitude, and wave angle, are verified and the resultant corrugation is fitted as a sinusoidal function. As the wave height factor increases, the results show that the temperature and velocity values in the solution field climb. More than 4.5% more has been added to the highest temperature value. It is also shown that the velocity values rise with the wave angle coefficient. The greatest rise is 50%. The Performance Ratio is also examined in this study. The findings show that the angle coefficient of 0.5π and π and the altitude coefficient of 0.2 provide values for the Performance Ratio that are higher than the unit. © 2024 The Authors
الكلمات المفتاحية: Altitude coefficient Angle coefficient Compact heat exchanger Corrugated wall Thermodynamic first law analysis
Abed A.M.; Abdulkadhim A.; Mohammed H.A.; Hamzah H.K.; Farooq H.A.; Mejbel Abed I.; Mahjoub Said N.
Journal of Taibah University for Science , Vol. 18 (1)
3 استشهاد Article Open Access English ISSN: 16583655
Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hillah, Iraq; Mechanical Engineering Department, University of Al-Qadisiyah, Ad Diwaniyah, Iraq; WA School of Mines-Minerals, Energy & Chemical Engineering, Curtin University, Perth, Australia; College of Engineering, Mechanical Engineering Department, University of Babylon, Hilla, Iraq; Department of Physics, College of Science, King Khalid University, Abha, Saudi Arabia
Nanofluids have garnered significant interest as a potential solution to address overheating challenges across diverse industries. Researchers are actively exploring different types of nanofluids to mitigate these issues. In this study, a numerical analysis was conducted using ANSYS software to examine the fluid flow and heat transfer characteristics of nanofluids (ranging from 0 to 4 volume fractions) in a corrugated wavy channel within the turbulent range. Various nanoparticles, including Al2O3, CuO, SiO2, and ZnO, were employed and dispersed in different base fluids such as ethylene glycol, glycerin, and water. The particle size of the nanoparticles ranged from 20 to 70 nm. The results revealed that SiO2/water-based nanofluids provide better heat transfer than all the water-based nanofluids. The maximum average Nusselt number and pressure drop of 200 and 115 Pa, respectively, were observed for SiO2 nanofluid (volume fraction of 0.04) with a particle size of 20 nm. Highlights Al2O3, CuO, SiO2 and ZnO considered in this work. Corrugated plates with three different corrugated angles of 20° to 60° are tested. Eexperiments are performed for different heat flux in turbulent range. Maximum heat transfer obtained for SiO2/water nanofluid. © 2024 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.
الكلمات المفتاحية: Computational fluid dynamics corrugated wavy channel nanofluids Nusselt number pressure drop turbulent flow
Tan C.H.; Yaw C.T.; Koh S.P.; Kadirgama K.; Abed A.M.; Majdi H.S.
IOP Conference Series: Earth and Environmental Science , Vol. 1372 (1)
3 استشهاد Conference paper Open Access English ISSN: 17551307
Institute of Sustainable Energy (ISE), Universiti Tenaga Nasional (UNITEN), Jalan IKRAM-UNITEN, Selangor, Kajang, 43000, Malaysia; Advance Nano Coolant-Lubricant (ANCL), College of Engineering, Universiti Malaysia Pahang, Pekan, 26600, Malaysia; Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang, Gambang, 26300, Malaysia; Centre for Research in Advanced Fluid and Processes, Universiti Malaysia Pahang, Pekan, 26600, Malaysia; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Babylon, 51001, Iraq
In the near future, the aviation industry is expected to significantly increase the usage of "drop-in"bio-jet fuel as the technologies in biofuel production advances and matures. Given the high rate of growth in the aviation sector, the demand for aerial transportation of passenger and cargo is projected to increase by two-fold in the next twenty years. This will raise the global aviation fuel consumption to an estimated 22.48 quadrillion British thermal unit (BTU) by 2040. To meet these high energy demands, it is necessary to develop alternative and sustainable methods to produce jet fuel. In light of this, intense research and numerous fundings have been allocated into developing efficient production methods for bio-jet fuel. Conventional jet fuel emits a considerable amount of greenhouse gases (GHGs) when combusted, which contributes to global warming. Compared to traditional jet fuel, bio-jet fuel is a renewable energy source and regarded to emit less GHGs. Bio-jet fuel can be produced using a diverse range of both edible (food crops such as soybean, corn, and sugar cane) and inedible (such as energy crops, agricultural wastes, and lignocellulosic biomass) feedstocks. There are various promising technologies that can produce aviation biofuel, which includes oil-to-jet [hydroprocessed ester and fatty acids (HEFA)], alcohol-to-jet, sugar-to-jet [hydroprocessing of fermented sugars (HFS)], and syngas-to-jet [Fisher-Tropsch (FT)]. Compared to the other techniques, HEFA bio-jet fuel can be sold at a lower price because HEFA requires less capital investment, capital cost, and energy cost. Although FT technique require high capital investment, FT bio-jet fuel can be sold at medium price due to its matured technology. The breakeven cost of ATJ and HFS bio-jet fuel varies greatly due to the supply and cost of sugar-rich feedstocks, as well as short lifespan of enzymes. Although bio-jet fuel has the potential to replace petroleum jet fuel in the future, there are still many technological and socio-economic challenges that must be overcome. Therefore, this paper aims to highlight the current status, technological advances, and economic challenges of bio-jet fuel production for energy transition in the aviation industry. © Published under licence by IOP Publishing Ltd.
الكلمات المفتاحية: Aviation Bio-jet fuel Bioenergy Sustainable Transition
Al-Karkhi N.; Stojanovic N.; Al-Zubaidi S.; Jweeg M.J.; Sultan H.S.; Abed A.M.; Abdullah O.I.
Tribology in Industry , Vol. 46 (1), pp. 141-150
2 استشهاد Article Open Access English ISSN: 03548996
Department of Automated Manufacturing Engineering, Al-Khwarizmi College of Engineering, University of Baghdad, Iraq; University of Kragujevac, Faculty of Engineering, Kragujevac, Serbia; College of Technical Engineering, Al-Farahidi University, Iraq; Al-Warith Center for Crowd Engineering & Management Research, University of Warith Al-Anbiyaa, Karbala, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq; Department of Energy Eng, College of Engineering, University of Baghdad, Iraq; Mechanical Engineering Department, College of Engineering, Gulf University, Sanad, 26489, Bahrain; Department of Mechanics, Al-Farabi Kazakh National University, Almaty, 050040, Kazakhstan
Increasing temperature due to frictional heat from sliding between contacting surfaces leads to increased wear and friction. Therefore, the researchers continue investigations to find the most suitable friction materials with good mechanical and thermal properties for frictional facings of clutch performance under this condition. In this research paper, the behavior and performance of the friction material HCC was studied under different normal load conditions (125, 175, 225, and 275 N) and different working environment temperatures (300 K and 390 K), where the rotation speed was 300 rpm. The results of the coefficient of friction and friction forces variation under different working conditions were analyzed and discussed in detail. XTM 500 tribometer test rig was used to perform the required tests, and the samples were made of the HCC friction material. The obtained results proved that the ambient temperature of the friction system has a significant negative effect on both the coefficient of friction and the force of friction. So, when the friction system's ambient temperature increases, the magnitude of the friction coefficient will decrease, and, thus, the transmitted torque will reduce too. © 2024 Published by Faculty of Engineering.
الكلمات المفتاحية: Friction material Frictional characteristics Thermal effect
Wei D.; Fang J.; Abed A.M.; Chauhan B.S.; Mouldi A.; Loukil H.; Chen Y.
Process Safety and Environmental Protection , Vol. 187, pp. 117-132
2 استشهاد Article English ISSN: 09575820
College of Electrical and Information, Northeast Agricultural University, Heilongjiang, Harbin, 150030, China; Air conditioning and Refrigeration Techniques Engineering Department, college of engineering and technologies, Al-Mustaqbal University, Babylon, Hillah, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Uttar Pradesh, Mathura, India; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Electrical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Institute of Research and Development, Ton Duc Thang University, Viet Nam
The present work proposes an innovative system for decarbonizing the energy mix and accelerating the worldwide green transition process. The system is driven by a biomass digester integrated with the supercritical carbon dioxide cycle for power generation and a multi-effect desalination unit for drinkable water production. At the heart of this concept is additional hydrogen injection through a proton exchange membrane electrolyzer based on photovoltaic panels. The suggested innovative model's techno-environmental, sustainability, and economic aspects are assessed and compared with a similar system without hydrogen injection. Then, a comparative multi-criteria optimization is applied to find the most optimal conditions from various facets based on the genetic algorithm with machine learning techniques. Afterward, the system's performance at different optimal conditions is analyzed and compared by evaluating the most significant techno-economic, environmental, and sustainability indicators. The parametric assessment comparing different models indicates that the proposed novel model, including increased hydrogen injection, surpasses the basic system in terms of performance efficiencies, emissions, and energy costs. In the first optimization scenario, the proposed method demonstrates robustness by achieving higher water production of 1456 kg/s, a lower total cost of 118 $/h, and a higher net power of 1.1 MW than the design condition. When considering the sustainability index, energy cost, and emission metric as the optimization objective, their values are altered from 0.81 to 0.85, 92.5 $/MWh to 89.7 $/MWh, and 64.2 kg/MWh to 53.6 kg/MWh. The results further show that when prioritizing the sustainability index, energy cost, and emission as objectives, all components perform better from the energy conversion quality aspect compared to the scenario where water production, total cost, and net power are the optimization objectives. Finally, it is observed that the combustion chamber and solar panels are the worst components from the irreversibility aspect because of the highest exergy destruction rate. © 2024 The Institution of Chemical Engineers
الكلمات المفتاحية: Biomass Hydrogen injection Multi-objective optimization SCO<sub>2</sub> cycle Solar
Abed A.M.; Hadrawi S.K.; Smaisim G.F.; Muftah A.F.; Jahanbin F.
International Journal of Low-Carbon Technologies , Vol. 19, pp. 185-191
2 استشهاد Article Open Access English ISSN: 17481317
Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Refrigeration and Air-Conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; College of Mechanical Engineering Technology, Libya, Benghazi, Libya; Department of Chemistry, Mashhad Branch, Islamic Azad University, Mashhad, Iran
Today, the use of solar energy is expanding and developing because this energy is easily available and there are various technologies for producing thermal and electrical energy and cooling. One of the most energy-consuming parts is heating and cooling systems in residential buildings, which include the major part of energy consumption in buildings. Therefore, the purpose of this research is to produce thermal energy for the cooling system using solar energy, which was used for analysis using Trnsys software. The purpose of the simulation is to check the thermodynamic parameters of the fluid and economic analysis, taking into account biological pollutants. The environment of the system has been considered. One of the important results of this research is the return on investment of 4 years, in which the required amount of energy supply through the solar system is 0.94. © 2024 Oxford University Press. All rights reserved.
الكلمات المفتاحية: simulation solar compression refrigeration thermo-economics Trnsys
Chen X.; Zhang Z.; Abed A.M.; Lin L.; Zhang H.; Escorcia-Gutierrez J.; Shohan A.A.A.; Ali E.; Xu H.; Assilzadeh H.; Zhen L.
Environmental Research , Vol. 260
2 استشهاد Article Open Access English ISSN: 00139351
Zhejiang College of Security Technology, Wenzhou, 325000, China; College of Information Engineering, China Jiliang University, Hangzhou, 310018, China; Mechanical power Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al-Mustaqbal Center for energy research, Al-Mustaqbal University, Babylon, 51001, Iraq; Institute of Intelligent Media Computing, Hangzhou DianziUniversity, Hangzhou, 310018, China; Department of Computational Science and Electronics, Universidad de la Costa, CUC, Barranquilla, 080002, Colombia; Architecture Department, College of Architecture and Planning, King Khalid University, Saudi Arabia; Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Biomaterials, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences, Chennai, 600077, India; Institute of Research and Development, Duy Tan University, Da Nang, Viet Nam; School of Engineering & Technology, Duy Tan University, Da Nang, Viet Nam; Faculty of Architecture and Urbanism, UTE University, Calle Rumipamba S/N and Bourgeois, Quito, Ecuador; Wenzhou Design Group Co. LTD, Wenzhou, 325000, China
Rainwater Harvesting (RWH) is increasingly recognized as a vital sustainable practice in urban environments, aimed at enhancing water conservation and reducing energy consumption. This study introduces an innovative integration of nano-composite materials as Silver Nanoparticles (AgNPs) into RWH systems to elevate water treatment efficiency and assess the resulting environmental and energy-saving benefits. Utilizing a regression analysis approach with Support Vector Machines (SVM) and K-Nearest Neighbors (KNN), this study will reach the study objective. In this study, the inputs are building attributes, environmental parameters, sociodemographic factors, and the algorithms SVM and KNN. At the same time, the outputs are predicted energy consumption, visual comfort outcomes, ROC-AUC values, and Kappa Indices. The integration of AgNPs into RWH systems demonstrated substantial environmental and operational benefits, achieving a 57% reduction in microbial content and 20% reductions in both chemical usage and energy consumption. These improvements highlight the potential of AgNPs to enhance water safety and reduce the environmental impact of traditional water treatments, making them a viable alternative for sustainable water management. Additionally, the use of a hybrid SVM-KNN model effectively predicted building energy usage and visual comfort, with high accuracy and precision, underscoring its utility in optimizing urban building environments for sustainability and comfort. © 2024
الكلمات المفتاحية: Energy efficiency in buildings Environmental impact assessment Machine learning regression Nano-composite materials Rainwater harvesting (RWH) Silver nanoparticles
Muftah A.F.; Saeid A.M.; El-Badri S.M.; Abed A.M.; Smaisim G.F.
Solar Energy and Sustainable Development , Vol. 13 (2), pp. 62-82
2 استشهاد Article Open Access English ISSN: 24119636
Department of Mechanical Engineering, College of Mechanical Engineering Technology, Benghazi, Libya; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit, Faculty of Engineering, University of Kufa, Iraq
Solar still owns low distillate productivity. Many researchers enhanced the performance of solar still by variable the design of its components. The combination of internal/external reflectors, absorber materials (fins, sponge, pebbles), and external condensers had a substantial impact on the absorption, evaporation, and condensation processes of the classic basin type solar still. This paper is showing how existing methods for increasing solar still absorption, evaporation, and condensation may be used to improve solar still absorption, evaporation, and condensation. From this review, it is found that for solar still, that adjusting the internal/external reflectors might increase daily distillate yield by 70% to 100%. Added Absorbent materials improve the thermal performance of a still by increasing production by over 20%. In addition, the external condensers enhanced still freshwater yield by 62% more than the regular still. © 2024, Libyan Center for Solar Energy Research and Studies. All rights reserved.
الكلمات المفتاحية: absorption condensation processes evaporation Solar desalination solar still
Al-Sumaily G.F.; Omran S.H.; Radhi A.A.; Hussain H.A.; Abed A.M.; Fayad M.A.; Chaichan M.T.; Abdul Wahhab H.A.; Mahdi L.A.A.-A.
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences , Vol. 113 (1), pp. 1-12
2 استشهاد Article Open Access English ISSN: 22897879
Energy and Renewable Energies Technology Center, University of Technology-Iraq, Baghdad, Iraq; Advance Welding Solutions Company Ltd, Baghdad, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Training and Workshop Center, University of Technology-Iraq, Baghdad, Iraq
Mixed convection inside a vertical square porous cavity is investigated numerically, with special attention given to left-side heating. In the study, the importance of the problem, methods used, main results, conclusions, and novelty of the work are discussed. The Brinkmann-Forchheimer-Darcy coupled momentum equations and the Local Thermal Equilibrium energy (LTE) equation are solved using the finite volume technique. Several elemental parameters are investigated, including Reynolds number (50 × Re × 300), Darcy number (0.01 × Da × 100), Richardson number (0 × Ri × 30), and porosity (0.5 × ε ≥ 0.95). The thermal conductivity ratio of solid to liquid was (1<Kr<105), and the inlet port width between (0.05<d/H<0.3). Results show that Nusselt number increases with Reynolds number, Richardson number, and pore thermal conductivity. With increasing porosity, an inverse relationship was observed. Nusselt number was maximized by finding the optimal inlet aperture size (d/H = 0.25). It provides valuable insights into how different parameters affect mixed convection in vertical square porous cavities. Heat transfer processes in porous media are improved by these results. This work goes beyond previous efforts in the literature in exploring a wide parameter space and determining the optimal inlet aperture size. © 2024, Semarak Ilmu Publishing. All rights reserved.
الكلمات المفتاحية: cavity mixed convection Nusselt number Porous media Reynolds number
Wang H.; Abed A.M.; Beemkumar N.; Kumar A.V.; Ayed H.; Mouldi A.; Shamel A.
Journal of Chemical Physics , Vol. 160 (19)
2 استشهاد Article English ISSN: 00219606
College of Transportation, Ludong University, Shandong, Yantai, 264025, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al -Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, School of Engineering and Technology, JAIN, Deemed to be University, Karnataka, Bangalore, India; Department of Mechanical Engineering, Raghu Engineering College, Visakhapatnam, India; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Chemistry, Sultan Moulay Slimane, Béni Mellal, Morocco
In this research, thermal modeling has been done to investigate the effect of nanofluid on the performance of the linear parabolic collector. Therminol vapor/liquid phase fluid (VP-1) has been used as a base fluid; iron oxide nanoparticles have been used to produce mono-nanofluid; and iron oxide multi-walled carbon nanotubes nanocomposite has been used as nanoparticles to produce hybrid nanofluid. The fluid flow inside the absorber tube of the collector is assumed to be turbulent. The results show that when hybrid nanofluid and mono-nanofluid are used, the energy and exergy efficiencies of the collector are higher than those for the conditions of using the base fluid, but their amount is slightly lower with the use of hybrid nanofluid than when the working fluid is mono-nanofluid. According to the obtained results, the highest energy efficiency of the linear parabolic collector using nanofluid and mono-nanofluid is 70.2% and 70.4%, respectively, and the highest exergy efficiency is 35.7% and 35.9%, respectively. Despite this, the friction coefficient of mono-nanofluid compared to hybrid nanofluid was obtained on average about 9% higher. The results showed that the criterion for evaluating the performance of the collector (hydrodynamic thermal efficiency) when hybrid nanofluid is used is more than when mono-nanofluid is used. © 2024 Author(s).
Abdulkadhim A.; Abed A.M.; Hamzah H.K.; Abed I.M.; Mahjoub N.S.; Ali F.H.
Heat Transfer , Vol. 53 (4), pp. 1989-2009
1 استشهاد Article English ISSN: 26884534
Mechanical Engineering Department, University Al-Qadisiyah, Al-Qadisiyah, Iraq; Mechanical Power Techniques Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Babylon, Hillah, Iraq; Mechanical Engineering Department, University of Babylon, Babylon, Iraq; Department of Physics, College of Science, King Khalid University, Abha, Saudi Arabia
The present investigation is on examination of the natural convection and entropy generation considering the heatlines visualization of nanofluid I-shaped enclosure with two corrugated walls considering inner rectangular heater of three different heights. The influence of Brownian motion along with thermophoresis had been implemented using Inhomogeneous two-phase model of nanofluid. The governing equations were solved numerically using COMSOL software. Influence of Rayleigh number (Formula presented.), Buoyancy ratio number (Formula presented.), Lewis number (Formula presented.), heater length (Formula presented.). The results indicate that the influence of Lewis number on heat transfer bettering is stronger at high Rayleigh number (Formula presented.) while its impact is negligible at a lower value of Rayleigh number (conduction mode). In addition, the total entropy generation gets its highest value at Lewis number (Formula presented.). Bejan number, fluid flow strength and heat rate increase as the rectangular heater height increases. Also, higher heat transfer augmentation is taken when the heater height is (Formula presented.) while increasing the heater height to (Formula presented.) leads to more total entropy generation. The impact of heater height on total entropy generation is highly affected by Rayleigh number as increasing the heater height from (Formula presented.) into (Formula presented.), total entropy generation increases by (Formula presented.) at (Formula presented.) while it increases by (Formula presented.) at (Formula presented.). © 2024 Wiley Periodicals LLC.
الكلمات المفتاحية: Bejan number heat function natural convection Nusselt number
Alhassan M.S.; Alameri A.A.; Ramírez-Coronel A.A.; Sapaev I.B.; Abed A.M.; Ramos-Huallpartupa D.-J.; Zabibah R.S.
Fluid Dynamics and Materials Processing , Vol. 20 (2), pp. 311-323
Article Open Access English ISSN: 1555256X
Division of Advanced Nanomaterial Technologies, Scientific Research Center, Al-Ayen University, Thi-Qar, Iraq; Department of Chemistry, College of Science, University of Babylon, Babylon, Iraq; Research Group in Educational Statistics, National University of Educatiosn, Azogues, Ecuador; Department Physics and Chemistry, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, National Research University, Tashkent, Uzbekistan; Akfa University, Tashkent, Uzbekistan; New Uzbekistan University, Tashkent, Uzbekistan; Department of Airconditioning and Refrigeration Engineering, Al-Mustaqbal University College, Hilla, 51001, Iraq; Academic Department of Agro-Industrial Engineering and Technology, Universidad Nacional José María Arguedas, Apurimac, Peru; The Islamic University, Najaf, Iraq
In line with recent studies, where it has been shown that nanofluids containing graphene have a stronger capacity to boost the heat transfer coefficient with respect to ordinary nanofluids, experiments have been conducted using water with cobalt ferrite/graphene nanoparticles. In particular, a circular channel made of copper subjected to a constant heat flux has been considered. As nanoparticles are sensitive to the presence of a magnetic field, different conditions have been examined, allowing both the strength and the frequency of such a field to span relatively wide ranges and assuming different concentrations of nanoparticles. According to the findings, the addition of nanoparticles to the fluid causes its rotation speed to increase by a factor of two, whereas ultraviolet radiation plays a negligible role. The amount of time required to attain the maximum rotation speed of the nanofluid and the Nusselt number have been measured under both constant and alternating magnetic fields for a ferrofluid with a concentration of 0.5% and at flow Reynolds number of 550 and 1750. © (2024), (Tech Science Press). All Rights Reserved.
الكلمات المفتاحية: magnetic field Nano fluid rectengular tube
Tian M.-W.; Smaisim G.F.; Yan S.-R.; Sajadi S.M.; Mahmoud M.Z.; Aybar H.S.; Abed A.M.
Journal of Energy Storage , Vol. 94
Erratum Open Access English ISSN: 2352152X
Digital Economy Academy, Yango University, Fujian, Fuzhou, 350015, China; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Department of Nutrition, Cihan University-Erbil, Kurdistan Region, Iraq; Department of Phytochemistry, SRC, Soran University, KRG, Iraq; Radiology and Medical Imaging Department, College of Applied Medical Sciences, Prince Sattam bin Abdulaziz University, Al-Kharj, Saudi Arabia; Faculty of Health, University of Canberra, Canberra, ACT, Australia; Department of Mechanical Engineering, Eastern Mediterranean University, TRNC, via Mersin 10, Turkey; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hilla, Iraq
This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/policies/article-withdrawal). Please note that an Expression of Concern has previously been published to alert readers to an ongoing investigation into this paper. This retraction supersedes the Expression of Concern. This article has been retracted at the request of the Editor-in-Chief. In investigating concerns brought up regarding the article, the editor reached out to the authors for an explanation (https://pubpeer.com/publications/9786FB2D1C5FE390BDA37EFCA2EABB). Post-publication, the Editor-in-Chief discovered suspicious changes in authorship between the original submission and the revised version of this paper. In summary, one author was removed from the paper and the authors' names Ghassan Fadhil Smaisim and Azher M. Abed were added to the revised paper without exceptional approval by the journal Editor, which is contrary to the journal policy on changes to authorship. The authors failed to provide a satisfactory explanation to the above points. The Editor has determined that the paper should be retracted. © 2024 Elsevier Ltd
Boujelbene M.; Mahdi J.M.; Abed A.M.; Ghanim M.S.; Hammoodi K.A.; Mohammed H.I.; Togun H.; Talebizadehsardari P.
Journal of Energy Storage , Vol. 82
Erratum Open Access English ISSN: 2352152X
Industrial Engineering Department, College of Engineering, University of Ha'il, Ha'il, 81451, Saudi Arabia; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, 51001, Iraq; Environment and Water Directorate, Ministry of Science and Technology, Baghdad, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Department of Physics, College of Education, University of Garmian, Kurdistan, Kalar, 46021, Iraq; Department Of Cooling And Air Conditioning Engineering, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq; Department of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Power Electronics, Machines and Control (PEMC) Research Group, University of Nottingham, Nottingham, United Kingdom
The authors regret < the author, Hayder I. Mohammed, should have two affiliations as shown below. Department of Physics, College of Education, University of Garmian, Kurdistan, Kalar 46021, Iraq And Department Of Cooling And Air Conditioning Engineering, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq>. The authors would like to apologise for any inconvenience caused. © 2024 Elsevier Ltd
Wang S.; Lin H.; Abed A.M.; Mahariq I.; Ayed H.; Mouldi A.; Lin Z.
Energy , Vol. 313
Erratum Open Access English ISSN: 03605442
College of Chemistry Biology and Environment, Yuxi Normal University, Yunnan, Yuxi, 653100, China; Yuxi Normal University, Yunnan, Yuxi, 653100, China; Mechanical Power Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Al -Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Guangzhou College of Commerce, Guangzhou, China
This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. The authors have plagiarised a paper that has already appeared in the Journal of Cleaner Production, Volume 401 Journal of Cleaner Production, entitled “Valorization of biogas from the anaerobic co-treatment of sewage sludge and organic waste: Life cycle assessment and life cycle costing of different recovery strategies” by Pasciucco, F et al. (2023), https://doi.org/10.1016/j.jclepro.2023.136762. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. © 2024 Elsevier Ltd
Xiong X.; Abed A.M.; Beemkumar N.; Mouldi A.; Loukil H.; Deifalla A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 60
Erratum Open Access English ISSN: 2214157X
School of Mechanical Engineering, Xijing University, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Karnataka, Bangalore, India; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha – 61421, Saudi Arabia; Department of Electrical Engineering, College of Engineering, King Khalid University, Abha – 61421, Saudi Arabia; Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
This experimental study proposes a new approach to enhance heat transfer performance inside heat exchangers of engine by tandem utilization of bubble injection and a punched zigzag strip turbulator. The side edges of the zigzag turbulator underwent two distinct geometry modifications, involving V and U shape cuts. These cuts were made at varying zigzag angles, ranging from 60° to 150° and four diffirent surface area. The potential improvement in thermal efficiency of the heat exchanger was evaluated at different inlet Reynolds number ranging from 5390 to 10860. Based on survey results, it has been demonstrated that at a Reynolds number of 5390, the Nusselt number and friction factor increase by 48 % and 154 % for U-Cut with a bending angle of 150°, and by 61 % and 170 % for V-Cut, respectively. Hence, V-cut boasts a TEF of 1.15, representing a 6.5 % improvement over U-cut. Additionally, to assess further enhancement, air bubbles with flow rate ranging 2–6 LPM were introduced to the central tube while maintaining the superior geometry. The data suggests that incorporating air bubbles can enhance heat transfer up to 142 %, achieving a TEF of 1.17 at an air flow rate of 6 LPM. © 2024 The Author(s)
الكلمات المفتاحية: Double tube heat exchanger Heat transfer Pressure drop U-cut zigzag turbulator V-cut zigzag turbulator Zigzag strip turbulator
Xiong X.; Abed A.M.; Beemkumar N.; Mouldi A.; Loukil H.; Deifalla A.; Mahariq I.
Case Studies in Thermal Engineering , Vol. 60
Article Open Access English ISSN: 2214157X
School of Mechanical Engineering, Xijing University, Xi’an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Babylon, 51001, Iraq; Al - Mustaqbal Center for Energy Research, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Karnataka, Bangalore, India; Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Electrical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Electrical and Computer Engineering Department, Gulf University for Science and Technology, Mishref, Kuwait; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
This experimental study proposes a new approach to enhance heat transfer performance inside heat exchangers of engine by tandem utilization of bubble injection and a punched zigzag strip turbulator. The side edges of the zigzag turbulator underwent two distinct geometry modifications, involving V and U shape cuts. These cuts were made at varying zigzag angles, ranging from 60◦ to 150◦ and four diffirent surface area. The potential improvement in thermal efficiency of the heat exchanger was evaluated at different inlet Reynolds number ranging from 5390 to 10860. Based on survey results, it has been demonstrated that at a Reynolds number of 5390, the Nusselt number and friction factor increase by 48 % and 154 % for U-Cut with a bending angle of 150◦, and by 61 % and 170 % for V-Cut, respectively. Hence, V-cut boasts a TEF of 1.15, representing a 6.5 % improvement over U-cut. Additionally, to assess further enhancement, air bubbles with flow rate ranging 2–6 LPM were introduced to the central tube while maintaining the superior geometry. The data suggests that incorporating air bubbles can enhance heat transfer up to 142 %, achieving a TEF of 1.17 at an air flow rate of 6 LPM. © 2024 The Author(s). Published by Elsevier Ltd. All rights are reserved.
الكلمات المفتاحية: Double tube heat exchanger Heat transfer Pressure drop U-cut zigzag turbulator V-cut zigzag turbulator Zigzag strip turbulator
Tian M.-W.; Abed A.M.; Yan S.-R.; Sajadi S.M.; Mahmoud M.Z.; Aybar H.S.; Smaisim G.F.
Journal of Energy Storage , Vol. 94
Erratum Open Access English ISSN: 2352152X
Digital Economy Academy, Yango University, Fujian, Fuzhou, 350015, China; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hilla, Iraq; Department of Nutrition, Cihan University-, Kurdistan Region, Erbil, Iraq; Department of Phytochemistry, SRC, Soran University, KRG, Iraq; Radiology and Medical Imaging Department, College of Applied Medical Sciences, Prince Sattam bin Abdulaziz University, Al-Kharj, Saudi Arabia; Faculty of Health, University of Canberra, ACT, Canberra, Australia; Department of Mechanical Engineering, Eastern Mediterranean University, TRNC, via Mersin, 10, Turkey; Department of Medical Research, China Medical University, Hospital, China Medical University, Taichung, Taiwan; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq
This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/policies/article-withdrawal). Please note that an Expression of Concern has previously been published to alert readers to an ongoing investigation into this paper. This retraction supersedes the Expression of Concern. This article has been retracted at the request of the Editor-in-Chief. In investigating concerns brought up regarding the article, the editor reached out to the authors for an explanation (https://pubpeer.com/publications/B956DE01421F5BF88A8710288E8E83?). Post-publication, the Editor-in-Chief discovered suspicious changes in authorship between the original submission and the revised version of this paper. In summary, one author was removed from the paper and the authors' names Ghassan Fadhil Smaisim and Azher M. Abed were added to the revised paper without exceptional approval by the journal Editor, which is contrary to the journal policy on changes to authorship. The authors failed to provide a satisfactory explanation to the above points. The Editor has determined that the paper should be retracted. © 2024 Elsevier Ltd
Liu Z.; Su Z.; Abed A.M.; Chaturvedi R.; Feyzbaxsh M.; Salavat A.K.
Applied Thermal Engineering , Vol. 254
Erratum English ISSN: 13594311
School of Petroleum Engineering, Guangdong University of Petrochemical Technology, Guangdong, Maoming, 525000, China; Faculty of Physical Education, Huai Nan Normal University, AnHui, Huai Nan, 232038, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Mathura, India; Mechanical Engineering Department, University of Kurdistan, Sanandaj, Iran; Mechanical Engineering Department, University of Mohaghegh Ardabili, Adrabil, Iran
This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. In investigating concerns regarding suspicious changes in authorship between the original submission and the revised version of this paper the Editor reached out to the authors for an explanation. In summary, the paper was submitted by Mahrad Feyzbaxsh (original Corresponding Author) and Ali Kiani Salavat. During revision, the author names Liu Zhe (New First Author), Zhanguo SU (New Corresponding Author), Azher M. Abed, and Risabh Chaturvedi were all added to the revised paper without explanation and without exceptional approval by the journal Editor, which is contrary to the journal policy on changes to authorship. The addition of these authors was not justified by the revisions made to the paper and did not align with the journal's policies on authorship criteria. Overall, the Editor has determined that the authorship of the paper cannot be relied upon, and the article needs to be retracted. © 2024 Elsevier Ltd
Smaisim G.F.; Abed A.M.; Al-Madhhachi H.; Hadrawi S.K.; Al-Khateeb H.M.M.; Kianfar E.
BioNanoScience , Vol. 14 (2), pp. 2080
Erratum Open Access English ISSN: 21911630
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Kufa, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Kufa, 54001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hillah, 51001, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Kufa, Iraq; Refrigeration and Air-Conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Civil Engineering Department, Faculty of Engineering, University of Kufa, Kufa, Iraq; Department of Chemistry, Sousangerd Branch, Islamic Azad University, Sousangerd, Iran; Department of Mechanical Engineering, Istanbul Medeniyet University, Istanbul, Kadikoy, Turkey; Department of Chemical Engineering, Arak Branch, Islamic Azad University, Arak, Iran; Young Researchers and Elite Club, Gachsaran Branch, Islamic Azad University, Gachsaran, Iran
The Editor-in-Chief has retracted this article because of a substantial overlap with a previously published article by different authors [1] and an article, co-authored by one of the authors, that was under submission at the same time [2]. Additionally, an investigation by the Publisher has found a number of articles, including this one, which share similar concerns, involving but not limited to irregularities with respect to submission and authorship. Ehsan Kianfar does not agree to this retraction. Ghassan Fadhil Smaisim, Azher M. Abed, Hayder Al-Madhhachi, Salema K. Hadrawi, and Hasan Mahdi M. Al-Khateeb did not respond to correspondence from the Editor about this retraction. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2024.
Sari A.; Abdelbasset W.K.; Sharma H.; Opulencia M.J.C.; Feyzbaxsh M.; Abed A.M.; Hussein S.A.; Bashar B.S.; Hammid A.T.; Prakaash A.S.; Uktamov K.F.
Journal of Energy Storage , Vol. 103
Erratum Open Access English ISSN: 2352152X
Department of Management Information Systems, Girne American University, via Mersin 10, North Cyprus, Kyrenia, Turkey; Department of Health and Rehabilitation Sciences, College of Applied Medical Sciences, Prince Sattam bin Abdulaziz University, Al Kharj, Saudi Arabia; Department of Physical Therapy, Kasr Al-Aini Hospital, Cairo University, Giza, Egypt; Department of Computer Engineering and Applications, GLA University Mathura, India; College of Business Administration, Ajman University, Ajman, United Arab Emirates; Mechanical Engineering Department, University of Kurdistan, Sanandaj, Iran; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Al-Manara College for Medical Sciences, Maysan, Iraq; Al-Nisour University College, Baghdad, Iraq; Computer Engineering Techniques Department, Faculty of Information Technology, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq; Department of Mathematics, Panimalar Institute of Technology, Poonamallee, Tamilnadu, Chennai, India; Tashkent State University of Economics, Tashkent City, Uzbekistan
This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. In investigating concerns brought up regarding inappropriate advertisement of the authorship of the article, the editor reached out to the authors for an explanation. Post-publication, the editor also discovered suspicious changes in authorship between the original submission and the revised version of this paper. In summary, the paper was submitted by a sole author, Mahrad Feyzbaxsh. During revision, the author names Arif Sari (New First Author), Walid Kamal Abdelbasset, Maria Jade Catalan Opulencia, Himanshu Sharma, Azher Abed, Shaymaa Abed Hussein, Bashar S. Bashar, Ali Thaeer Hammid, A. S. Prakaash and Khusniddin Fakhriddinovich Uktamov were all added to the revised paper without explanation and without the exceptional approval by the journal Editor, which is contrary to the journal policy on changes to authorship. The Editor reached out to the authors for an explanation, but they failed to provide a satisfactory explanation to these changes. Overall, the Editor feels that the findings of the manuscript cannot be relied upon, and the article needs to be retracted. Mahrad Feyzbaxsh disagrees with the retraction of the article and disputes the grounds for it. © 2024 Elsevier Ltd
2023
114 بحث
Hasan H.A.; Togun H.; Abed A.M.; Biswas N.; Mohammed H.I.
Applied Energy , Vol. 346
121 استشهاد Article English ISSN: 03062619
Ministry of Higher Education & Scientific Research, Department of Studies, Planning & Follow-up Baghdad, 10011, Iraq; Electromechanical Engineering Department, University of Technology, Baghdad, 10066, Iraq; Department of Biomedical Engineering, College of Engineering, University of Thi-Qar, Thi-Qar 64001, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq
Modern society depends on energy storage systems like Lithium-ion (Li-ion) batteries. Li-ion battery cells are delicate to changes in temperature. Extreme environmental conditions affect their life cycle and performance. Therefore, effective cell temperature management is a must for secure and dependable battery operation. Additionally, the high production costs of electric cars must be countered by the adaptability of the battery pack design for modern electric vehicles. As the chemical reactions generate more heat and raise the battery's temperature, it may cause the battery to explode and cause fires in the workplace. To address this issue, the present work attempts to numerically study a novel design of an efficient air-cooling system for improving the performance of lithium-ion batteries by reducing the operational temperatures under a different coolant flow rate. The main output of the presented study is the analysis of a novel design of an efficient air-cooling system for lithium-ion batteries. The study aims to reduce the operational temperatures of the batteries under different coolant flow rates to improve their performance and service life. The numerical simulations are carried out using a finite volume-based computing tool with the K-epsilon (k-ε) turbulence model. The analysis is performed for various pertinent parametric ranges, including the spacing between the batteries, Reynolds numbers, and average Nusselt numbers. The results indicate that increasing air inlet velocity (Re) substantially reduces the average air temperature of the cooling pack and temperature difference (ΔT) of the battery cells, and the cooling pack's average heat transfer rate (Nu) increases monotonically as the Re increases. © 2023 Elsevier Ltd
الكلمات المفتاحية: Air-cooling system Battery thermal management Energy storage Lithium-ion battery Thermal performance
Smaisim G.F.; Abed A.M.; Al-Madhhachi H.; Hadrawi S.K.; Al-Khateeb H.M.M.; Kianfar E.
BioNanoScience , Vol. 13 (1), pp. 219-248
111 استشهاد Retracted English ISSN: 21911630
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Kufa, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Kufa, 54001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hillah, 51001, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Kufa, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Civil Engineering Department, Faculty of Engineering, University of Kufa, Kufa, Iraq; Department of Chemistry, Sousangerd Branch, Islamic Azad University, Sousangerd, Iran; Department of Mechanical Engineering, Istanbul Medeniyet University, Kadikoy, Istanbul, Turkey; Department of Chemical Engineering, Arak Branch, Islamic Azad University, Arak, Iran; Young Researchers and Elite Club, Gachsaran Branch, Islamic Azad University, Gachsaran, Iran
The graphene-based materials are promising for applications in supercapacitors and other energy storage devices due to the intriguing properties, i.e., highly tunable surface area, outstanding electrical conductivity, good chemical stability, and excellent mechanical behavior. This review summarizes recent development on graphene-based materials for supercapacitor electrodes, based on their macrostructural complexity, i.e., zero-dimensional (0D) (e.g., free-standing graphene dots and particles), one-dimensional (1D) (e.g., fiber-type and yarn-type structures), two-dimensional (2D) (e.g., graphenes and graphene-based nanocomposite films), and three-dimensional (3D) (e.g., graphene foam and hydrogel-based nanocomposites). There are extensive and on-going researches on the rationalization of their structures at varying scales and dimensions, development of effective and low-cost synthesis techniques, design and architecturing of graphene-based materials, as well as clarification of their electrochemical performance. There are several methods for producing graphene, each with its own advantages and disadvantages. Graphene-based materials have great potential to be employed in supercapacitors due to their unique two-dimensional structure and inherent physical properties like excellent electrical conductivity and large area. This text summarizes recent developments within the sector of supercapacitors, including double-layer capacitors and quasi-capacitors. The pros and cons of using them in supercapacitors are discussed. Compared to traditional electrodes, graphene-based materials show some new properties and mechanisms within the method of energy storage and release. During this paper, we briefly describe carbon structures, particularly graphene, and also the history of graphene discovery, and briefly describe the synthesis methods, properties, characterization methods, and applications of graphene. © 2022, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.
الكلمات المفتاحية: Carbon structures Characterization Chemical vapor deposition Energy storage Epitaxial growth Graphene Graphene-based materials Two-dimensional materials
Abdulrasool Hasan H.; Togun H.; M Abed A.; I Mohammed H.; Biswas N.
International Journal of Thermal Sciences , Vol. 190
82 استشهاد Article English ISSN: 12900729
Ministry of Higher Education & Scientific Research, Department of Studies, Planning & Follow-up, Baghdad, 10011, Iraq; Electromechanical Engineering Department, University of Technology, Baghdad, 10066, Iraq; Department of Biomedical Engineering, College of Engineering University of Thi-Qar, Thi-Qar, 64001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India
Li-ion battery cell operations, as an energy storage device, are delicate to changes in temperature. Extreme environmental conditions affect their cycle life and performance. Therefore, effective cell temperature management is necessary for secure and dependable battery operation. Additionally, the high production costs of electric cars must be countered by the adaptability of the battery pack design for Electric Vehicles. As the reactions generate more heat and raise the battery's temperature, it may cause the battery to explode and cause fires in the workplace. The CFD simulation is used to study the influence of a novel design of an efficient Air-cooling system to improve the performance of lithium-ion batteries by reducing the operating temperatures under a different coolant flow rate. The operational performance and service life of lithium-ion batteries are greatly affected by operating temperature. The different spacing between the batteries is investigated (S = 2, 4, and 6 mm) by using air as a cooling fluid to dissipate the heat from lithium-ion batteries by flowing the air inside flow air inside the cooling pack. The Reynolds numbers (Re) vary from 15,000 to 30,000 in the current analysis. The increasing Re number increases the average Nusselt numbers (Nu). The findings demonstrate that the thermal performance (Nu) rises as the spacing rises. The outcome of this study will provide helpful information for the designer for proper modeling of the actual battery pack design of modern, efficient EVs. © 2023
الكلمات المفتاحية: Air-cooling system Heat transfer Lithium-ion battery (LIB) Thermal performance
Rimsha; Murawwat S.; Gulzar M.M.; Alzahrani A.; Hafeez G.; Khan F.A.; Abed A.M.
Journal of Energy Storage , Vol. 72
73 استشهاد Article English ISSN: 2352152X
Department of Electrical Engineering, Lahore College for Women University, Lahore, 51000, Pakistan; Department of Control & Instrumentation Engineering and Interdisciplinary Research Center for Renewable Energy and Power Systems (IRC-REPS), King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia; Electrical Engineering Department, College of Engineering, Najran University, Najran, 11001, Saudi Arabia; Department of Electrical Engineering, University of Engineering and Technology, Mardan, 23200, Pakistan; Center of Excellence in Information Assurance, King Saud University, Riyadh, 11653, Saudi Arabia; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
The lithium-ion battery has a great significance in meeting the growing demand for Electric Vehicles (EVs) due to its higher energy density, longer life cycle, and notable nominal voltage and capacity. One crucial parameter for lithium-ion batteries is the State of Charge (SOC), which represents the available capacity and ensures that the system operates in a secure and reliable mode for EVs. SOC plays a significant role in the Battery Management System (BMS). This research aims to propose an Equivalent Circuit Model (ECM) based on Kalman filtering method and a data-driven technique, Deep Feed-Forward Neural Network (DFNN), for accurate SOC estimation of Electric Vehicle Battery (EVB). Initially, lithium-ion battery parameters are identified using a second-order RC (2-RC) Equivalent Circuit Model (ECM). Subsequently, battery modeling is performed, and various operating conditions such as terminal voltage, load current, and temperature are measured to obtain initial values for the filtering method used in SOC estimation. These operating conditions are crucial for ensuring safe and efficient charging and discharging of lithium-ion batteries. Based on the identified ECM parameters, SOC estimation error and bound error are then minimized using Kalman Filter (KF), Extended Kalman Filter (EKF), and Unscented Kalman Filter (UKF) techniques. These filtering methods are employed to accurately estimate the SOC of the battery. The results demonstrate that the proposed model based on KF and EKF algorithms estimates SOC bound error within 2.5 % - –2 % and estimation error <1.5 % - –0.7 %. On the other hand, the UKF estimates a SOC bound error of 1.5 % and an estimation error of 0.5 %, proving the algorithm's efficiency and reliability. Particularly, this estimation error rejects measurement noise and parametric uncertainties for lithium-ion batteries to drive EVs with efficacy using UKF. Hence, the UKF algorithm estimated SOC has low estimation error, ensuring more accurate results. Finally, data-driven, DFNN method is implemented for accuracy enhancement of SOC estimation with trained 20 iterations and epochs data. Using this method, the SOC estimation accuracy is satisfactory with only 0.04 % Root Mean Squared Error (RMSE). The validation results indicate that the model-based filtering method is an effective method for SOC estimation to be applicable. In contrast, in a novel data-driven approach, SOC estimation accuracy is improved by approximately 0.46 %. © 2023 Elsevier Ltd
الكلمات المفتاحية: Deep Feed Forward Neural Network Equivalent Circuit Model Extended Kalman Filter Kalman Filter Lithium-ion battery State of Charge Unscented Kalman Filter
Alzahrani A.; Rahman M.U.; Hafeez G.; Rukh G.; Ali S.; Murawwat S.; Iftikhar F.; Haider S.I.; Khan M.I.; Abed A.M.
IEEE Access , Vol. 11, pp. 33872-33886
70 استشهاد Article Open Access English ISSN: 21693536
Najran University, College of Engineering, Electrical Engineering Department, Najran, 11001, Saudi Arabia; University of Engineering and Technology, Department of Electrical Engineering, Mardan, 23200, Pakistan; University of Engineering and Technology, Department of Telecommunication Engineering, Mardan, 23200, Pakistan; Lahore College for Women University, Department of Electrical Engineering, Lahore, 54000, Pakistan; King Saud University, College of Computer and Information Sciences, Riyadh, 11543, Saudi Arabia; University of Engineering and Technology, Department of Electrical Engineering, Peshawar, 25000, Pakistan; Al-Mustaqbal University College, Air Conditioning and Refrigeration Techniques Engineering Department, Babylon, 51001, Iraq
Multi-objective energy optimization is pivotal for reliable and secure power system operation. However, multi-objective energy optimization is challenging due to interdependent and conflicting objectives. Thus, a multi-objective optimization model is needed to cater to conflicting objectives. On this note, a multi-objective optimization model is developed, where a non-dominated genetic sorting algorithm is employed to optimize objectives pollution emission, operation cost, and loss of load expectation (LOLE) considering renewable energy sources (RES). RES, like wind and solar, are intermittent and uncertain, which are modelled using a beta probability density function (PDF). The developed method's effectiveness and applicability are analyzed by implementing it on the 30-bus system, and the results are compared for two cases. Findings reveal that the developed multi-objective optimization model minimizes operation cost, pollution emission, and LOLE by 59%, 7%, and 2.67%, respectively, compared to existing models. © 2013 IEEE.
الكلمات المفتاحية: demand response programs multi-objective energy optimization renewable energy sources scheduling Smart grid
Dai X.; Andani H.T.; Alizadeh A.; Abed A.M.; Smaisim G.F.; Hadrawi S.K.; Karimi M.; Shamsborhan M.; Toghraie D.
Engineering Applications of Artificial Intelligence , Vol. 122
60 استشهاد Article English ISSN: 09521976
School of Artificial Intelligence, Chongqing Technology and Business University, Chongqing, 400067, China; Department of Electronic engineering, Isfahan University of Technology, Isfahan, Iran; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; Department of Computer Science, Shahrekord University, Shahrekord, 88186-34141, Iran; Department of Mechanical Engineering, College of Engineering, University of Zakho, Zakho, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
Studying the dynamic viscosity (DV) is a key factor to determine the nanofluids’ hydrodynamic behavior (NFs). In this research, the effect of volume fraction (φ), shear rate (SR), and temperature (T) on the DV, and torque of SiO2 nanoparticles (NPs)/ Ethylene glycol (EG) nanofluid (NF) are studied with an artificial neural network (ANN). Different machine learning (ML) models are examined to predict the rheological properties, and then the best model is selected for prediction. The results show that the torque mostly increased linearly with the SR in all samples. The slope of this enhancing trend is higher for lower T. The Gaussian Process Regression (GPR) models with the Matérn covariance function provided the best results on both datasets to predict the DV. The correlation results provided by this method to predict the DV in terms of Pearson's Linear Correlation Coefficient (PLCC), and Spearman's Rank Order Correlation Coefficient (SROCC) were 0.999 and 1, respectively. R squared (R2) was 0.996 and, the Root Mean Squared Error (RMSE), and Mean Absolute Percentage Error (MAPE) values of about 0.24 and 1.61 represented the accuracy and power of this method to predict the DV values unseen data by the model. The GPR torque predictor model performed very well by providing a correlation of about 0.98 and an RMSE of about 4. Matérn covariance functions that used separate length scales per predictor with ν=3/2 (ardmatern 32) and ν=5/2 (ardmatern52) were superior to other functions. All 100 models trained on each dataset were well-trained and quite reliable. The trained models were accurate enough to be used in related applications. © 2023 Elsevier Ltd
الكلمات المفتاحية: Artificial neural network Hybrid nanofluid Viscosity
Ben Khedher N.; Togun H.; Abed A.M.; Al-Najjar H.M.T.; Dulaimi A.; Mohammed H.I.; Mahdi J.M.; Yvaz A.; Talebizadehsardari P.
Journal of Building Engineering , Vol. 75
59 استشهاد Article Open Access English ISSN: 23527102
Department of Mechanical Engineering, College of Engineering, University of Ha'il, P.Box 2440, Ha'il City, Saudi Arabia; Laboratory of Thermal and Energetic Systems Studies (LESTE) at the National School of Engineering of Monastir, University of Monastir, Tunisia; Department of Biomedical Engineering, College of Engineering, University of Thi-Qar, Thi-Qar, 64001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Department of Physics, College of Education, University of Garmian, Kurdistan, Kalar, 46021, Iraq; World-Class Research Center “Advanced Digital Technologies”, State Marine Technical University, Saint Petersburg, 190121, Russian Federation; Faculty of Engineering, University of Nottingham, Nottingham, United Kingdom
This paper aims to study the effect of circular Y-shaped fin arrangement to improve the low thermal response rates of a double-tube heat exchanger containing Paraffin phase change material (PCM). ANSYS software is employed to perform the computational fluid dynamic (CFD) simulations of the heat exchanger, including fluid flow, heat transfer, and the phase change process. The optimum state of the fin configuration is derived through sensitivity analysis by evaluating the geometrical parameters of the Y-shaped fin. For the same height of the fins (10 mm), the solidification time is reduced by almost 22%, and the discharging rate is enhanced by almost 26% using Y-shaped fins compared with the straight fins. The results demonstrate that the solidification time is inversely proportional to the fin's length. The heat release rate for the case with the longest fins (stem length of 10 mm) is 39 W, almost 2.8 times higher than that with the fins' stem length of 5 mm. The case with the tributary's angle of 22.5o solidified in 55 min, faster than the other studied angles. Increasing the number of fins significantly affects the solidification time and discharging rate. By increasing the number of fins from 3 to 9, the heat transfer rate improves by 194%. The advantages of circular Y-shaped fins are well known in heat transfer applications and therefore are characterized toward higher performance in this study for the first time during the solidification process. © 2023
الكلمات المفتاحية: Circular fins Phase change process Solidification Vertical double-pipe heat exchanger Y-shaped fins
Yi S.; Lin H.; Abed A.M.; Shawabkeh A.; Marefati M.; Deifalla A.
Sustainable Cities and Society , Vol. 91
59 استشهاد Article English ISSN: 22106707
School of Finance, Anhui University of Finance & Economics, Bengbu 233030, China; Yuxi Normal University, Yunnan Province, ZIP 653100, China; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; College of Engineering and Technology, American University of the Middle East, Kuwait; Department of Industrial Engineering, Ankara Yıldırım Beyazıt University (AYBU), Ankara, 06010, Turkey; Full professor Future University in Egypt, South teseen, New cairo, 11835
The current article develops a conceptual study and simulation of a multigeneration process based on the solid waste-incineration power plant coupled with a field of solar thermal system. The considered multi-generation layout is comprised of a municipal solid waste incineration unit, a steam cycle, the concentrating solar thermal collectors (based on the parabolic trough collectors), an organic steam cycle, a desalination unit (based on a reverse osmosis unit), and a hydrogen fuel production unit (based on the alkaline electrolyzer). The planned multi-generation process can produce electricity, thermal energy, hydrogen energy, and freshwater. The paper addresses a multi-generation process with a new structure, configuration and relationships between the units of the process. A comprehensive thermodynamic-conceptual, exergoeconomic and sustainability evaluations of the multi-generation process is developed. The findings indicated that the process can achieve energetic and exergetic efficiencies of 21.72% and 16.94%, respectively. Moreover, approximately 42.2 MW of the exergy is destroyed by the process. In such a context, the total cost and sustainability index of the proposed process were 653.03 USD/h and 1.72, respectively. It was also found that the Levelized Cost of Energy of the system was almost 0.072 USD/kWh. A parametric analysis is also provided to identify influencing factors. © 2023 Elsevier Ltd
الكلمات المفتاحية: Exergoeconomic Incineration process Multi-generation Parabolic trough collector Sustainability Waste-to-energy
Wang H.; Su Z.; Abed A.M.; Nag K.; Deifalla A.; Marefati M.; Mahariq I.; Wei Y.
Process Safety and Environmental Protection , Vol. 170, pp. 139-156
57 استشهاد Article English ISSN: 09575820
Xijing University, Shannxi, Xi'an, 710123, China; Faculty of Physical Education, HuaiNan Normal University, AnHui, Huainan, 232038, China; Air Conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; College of Engineering and Technology, American University of the Middle East, Kuwait; Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Department of Energy Engineering, Faculty of Natural Resources and Environment, Science and Research Branch, Islamic Azad University, Tehran, Iran
Recently, due to increasing concerns about the reduction of fossil energies reserves and environmental crises, the development of more efficient and low-emission systems has become necessary. An alternative energy system should be able to improve the efficiency of energy production, have a reasonable investment cost and be environmentally friendly. The current research developed a multi-criteria evaluation method of a new multigeneration cycle (MGC) based on a solid oxide fuel cell (SOFC) and biomass fuel. In the planned MGC, the SOFC is fed by syngas from the biomass gasification process. To reduce environmental hazards, a fraction of the carbon dioxide was recycled for reutilization in the aforementioned process. A gas turbine and a thermoelectric generator (TEG) were employed to produce electrical energy and an absorption chiller was embedded to produce cooling. The output heat of the fuel cell was utilized for heating purposes. A part of the electricity produced was feed into the electrolysis cycle to produce hydrogen. Excess hydrogen was combined with carbon dioxide released from the MGC in a synthesis cycle to reduce pollutant emissions by producing methane. A thermodynamic-conceptual, exergoeconomic and environmental evaluation of the MGC was developed. The optimization based on the genetic algorithm to maximize performance and minimize the cost of the MGC was also developed. The results obtained from the optimization indicate that the proposed MGC can compete with most biomass-driven systems. Besides, the amount of carbon dioxide released can be significantly reduced compared to conventional coal, natural gas and petroleum-driven power plants. © 2022 The Institution of Chemical Engineers
الكلمات المفتاحية: Biomass CO<sub>2</sub> reduction Gas Turbine Hydrogen Energy Multigeneration Cycle Solid Oxide Fuel Cell
Ben Khedher N.; Togun H.; Abed A.M.; Mohammed H.I.; Mahdi J.M.; Ibrahem R.K.; Yaïci W.; Talebizadehsardari P.; Keshmiri A.
Engineering Applications of Computational Fluid Mechanics , Vol. 17 (1)
56 استشهاد Article Open Access English ISSN: 19942060
Department of Mechanical Engineering, College of Engineering, University of Ha’il, Ha’il, City, Saudi Arabia; Laboratory of Thermal and Energetic Systems Studies (LESTE) at the National School of Engineering of Monastir, University of Monastir, Monastir, Tunisia; Department of Biomedical Engineering, College of Engineering, University of Thi-Qar, Thi-Qar, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, Iraq; Department of Medical Instrumentation Engineering, Al-Farahidi University, Baghdad, Iraq; CanmetENERGY Research Centre, Natural Resources Canada, Ottawa, Canada; Faculty of Engineering, University of Nottingham, Nottingham, United Kingdom; School of Engineering, University of Manchester, Manchester, United Kingdom
To overcome the weak thermal conduction of the phase change materials (PCM), This investigation aims to study the effect of circular Y-shaped fins added to a two-pipe latent heat-saving unit compared with conventional circular fins. The system is placed in a straight-up orientation, and the PCM is located in the annulus, whereas hot water is moved inside the internal tube to charge the phase change material (PCM) with a phase change point of 35°C. Different independent geometric factors of the fins involving the length of the stem and angle of the tributaries to the horizontal line and the number of Y-shaped fins are analysed. The impact of the working fluid’s Reynolds number and temperature (as the input parameters) are evaluated as a sensitivity analysis to control the output (melting time and rate). The results show that increasing the height and number of the fins and reducing the angles of the tributaries results in higher performance of the system. For the optimal case, increasing the Reynolds number of the working fluid from 500 to 2000 results in 31% reductions in the melting time. Moreover, raising the working fluid’s temperature from 45° to 55° reduces the melting time by ∼44%. © 2023 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.
الكلمات المفتاحية: charging Circular Y-shaped fins double-pipe heat exchanger PCM thermal energy storage
Dong R.-E.; Zhanguo S.; Mansir I.B.; Abed A.M.; Niu X.
Process Safety and Environmental Protection , Vol. 171, pp. 812-833
54 استشهاد Article English ISSN: 09575820
College of Mechanical Engineering, Xijing University, Shaanxi, Xi'an, 710123, China; Faculty of Physical Education, HuaiNan Normal University, Anhui, Huainan, 232038, China; Department of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Centre for Energy Research and Training, Ahmadu Bello University, P.M.B, Zaria, 1045, Nigeria; Air conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam
In this investigation, a zero-dimensional model of a renewable generation system encompassing a solar-geothermal driven Proton Exchange Membrane (PEM) electrolyzer integrated with Organic Rankine Cycle (ORC), Ejector Refrigeration Cycle (ERC) and Reverse osmosis (RO) unit is expressed with respect to energetic, exergetic, economic, and exergoeconomic points of view. Cooling and heating energies, electricity, distilled water, Hydrogen (H2), Oxygen (O2) are the key products of the mentioned system. In order to acquire the influences of the solar collector numbers, area ratio, and pressure drop of the ejector and working fluid of solar collectors on the efficiency of the hybrid unit, a set of equations were coded in MATLAB and Engineering Equation Solver (EES). The exergy destruction rate, exergy efficiency, and exergy destruction ratio of each subsystem and exergy flow diagram of all subsystems were evaluated in this study. Afterward, the results of the sensitivity analysis were used for multi-criteria optimization in three various layouts that the LINMAP as well as the fuzzy TOPSIS decision makings and Gray Wolf Optimizer (GWO), are considered to get the optimal result. The results have indicated that the main variables analyzed are more affected by the variation in the number of the flat plate solar collector. Besides, in the second optimization scenario, the TOPSIS selects the optimal solution of exergy efficiency and unit exergy cost of the product of 3% and 19.77 $/Gj, while the LINMAP selects 3.001% and 19.80 $/Gj point. © 2023 The Institution of Chemical Engineers
الكلمات المفتاحية: Fuzzy TOPSIS LINMAP Multi-generation system Multi-objective optimization PEM electrolyzer Solar-geothermal driven ORC-ERC
Hasan H.A.; Togun H.; Mohammed H.I.; Abed A.M.; Homod R.Z.
Journal of Energy Storage , Vol. 72
52 استشهاد Article English ISSN: 2352152X
Ministry of Higher Education & Scientific Research, Department of Studies, Planning & Follow-up, Baghdad, 10011, Iraq; Electromechanical Engineering Department, University of Technology, Baghdad, 10066, Iraq; Department of Biomedical Engineering, College of Engineering, University of Thi-Qar, Thi-Qar, 64001, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq; College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Oil and Gas Engineering, Basra University for Oil and Gas, Iraq
The CFD simulation of this study shows the impact of airflow with varying Reynolds numbers on heat transfer improvement with cooling lithium-ion batteries at varied battery row spacing. Air was used as a cooling fluid to remove heat from lithium-ion batteries by flowing within the cooling pack during testing of four different spacing ranges (S = 1–4 mm). The Reynolds numbers vary from15,000 to 30,000 in the current analysis. The average Nu numbers are augmented through increasing Reynolds numbers for all types of cooling fluids. The CFD results show that the Nu number increases as spacing increases. The temperature of the single cell drops with increasing the Re or the flow rate since the liquid in the pack exchange with a new cold HTF at a faster rate. The average Nu number is directly proportional to the Re number and the spacing between the neighbor cells. Further, the temperature of the cells located closer to the inlet section is always lower than those closer to the outlet section because of the temperature differences between the cells and the HTF. This study has confirmed that the flowing air with high Re and highest spacing S = 4 mm has a major impact on thermal dissipation and rapid heat transfer improvement from lithium-ion batteries in the cooling pack, which leads to improved electrical performance and increase the life of lithium-ion batteries. © 2023
الكلمات المفتاحية: Cooling battery Cooling pack Heat dissipation Heat transfer Lithium-ion batteries Thermal management system (TMS)
Bahlekeh A.; Mouziraji H.R.; Togun H.; Tiji A.E.; Abed A.M.; Mohammed H.I.; Ibrahem R.K.; Alhassan M.S.; Talebizadehsardari P.
Energy Science and Engineering , Vol. 11 (7), pp. 2552-2570
50 استشهاد Article Open Access English ISSN: 20500505
Mechanical Engineering Department, Ege University, Izmir, Turkey; Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran; Department of Biomedical Engineering, College of Engineering, University of Thi-Qar, Thi-Qar, Iraq; Department of Mechanical Engineering, Semnan University, Semnan, Iran; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, Iraq; Department of Medical Instrumentation Engineering Techniques, Al-Farahidi University, Baghdad, Iraq; Division of Advanced Nano Material Technologies, Scientific Research Center, Al-Ayen University, Thi-Qar, Iraq; Centre for Sustainable Energy Use in Food Chains, Institute of Energy Futures, Brunel University London, Uxbridge, United Kingdom
In this study, the effect of fin number and size on the solidification output of a double-tube container filled with phase change material (PCM) was analyzed numerically. By altering the fins' dimensions, the PCM's heat transfer performance is examined and compared to finless scenarios. To attain optimal performance, multiple inline configurations are explored. In addition, the initial conditions of the heat transfer fluid (HTF), including temperature and Reynolds number, are considered in the analysis. The research results show a significant impact of longer fins with higher numbers on improving the solidification rate of PCM. The solidification rate increases by 67%, 170%, 308%, and 370% for cases with 4, 9, 15, and 19 fins, respectively, all with the same fin length and initial HTF boundary condition. The best case results in a solidification time that is 4.45 times shorter compared to other fin number and dimension scenarios. The study also found that moving from Reynolds numbers 500 to 1000 and 2000 reduced discharging times by 12.9% and 22%, respectively, and increased heat recovery rates by 14.4% and 27.9%. When the HTF entrance temperature was 10°C and 15°C, the coolant temperature showed that the entire discharging time decreased by 37.5% and 23.1% relative to the solidification time when the initial temperature was 20°C. Generally, this work highlights that increasing the length and number of fins enhances thermal efficiency and the phase change process. © 2023 The Authors. Energy Science & Engineering published by the Society of Chemical Industry and John Wiley & Sons Ltd.
الكلمات المفتاحية: circular fins double-pipe heat exchanger optimum fin spacing phase change materials solidification thermal energy storage
Angili S.N.; Morovvati M.R.; Kardan-Halvaei M.; Saber-Samandari S.; Razmjooee K.; Abed A.M.; Toghraie D.; Khandan A.
International Journal of Biological Macromolecules , Vol. 224, pp. 1152-1165
49 استشهاد Article English ISSN: 01418130
Department of Mechanical Engineering, Amirkabir University of Technology, 424 Hafez Ave., Tehran, Iran; New Technologies Research Center, Amirkabir University of Technology, Tehran, Iran; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Dental Research Center, Dental Research Institute, School of Dentistry, Isfahan University of Medical Science, Isfahan, Iran; Composites Research Laboratory (CRLab), Amirkabir University of Technology, Tehran, Iran
This study proposes 3D-printed Poly L-lactic acid (PLA) scaffolds coated with alginate/MgO, and includes three different cellular topologies. Three unique scaffold models were considered: Perovskite type 1 (P1), Perovskite type 2 (P2), and IWP. Each scaffold was coated with alginate/MgO at the concentrations of 0 wt%, 5 wt%, 10 wt%, 15 wt%, and 20 wt%. For morphological and phase study, the microstructure of fabricated scaffolds was characterized using a Field Emission Scanning Electron Microscope (FESEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD) analysis. Besides, the biological characteristics of scaffolds, such as biocompatibility, antibacterial activity, and cell survival were studied after 21 days of soaking in the simulated body fluid (SBF). The results of biological studies indicate that the apatite layer covered the majority of composite scaffold's surface and sealed the pores' surface. The material properties of Alginate/MgO RVEs were evaluated under PBC, and it described that the elastic modulus enhanced from 100 (pure Alginate) to 130 MPA by adding 20 wt% MgO nanoparticles. The presented findings were compared to the results obtained by the experimental procedure and revealed satisfactory agreement. RVE-achieved material properties were used in the additional studies on the scaffolds to find the best candidate due to the material properties and architectures. Furthermore, experiment and finite element simulation were used to evaluate the mechanical properties of scaffolds under the compressive deformation. According to the results, the compressive strength of structures follows the order σPerovskite type 1>σPerovskite type 2 >σIWP. The results indicate that increasing MgO content from 0 wt% to 20 wt% enhances each structure's compressive strength and elastic modulus. In conclusion, based on the biological findings and simulation results, PLA scaffold with Perovskite type 1 (P1) architecture coated with Alginate/ 20 wt% MgO had the best response which is the final research candidate. © 2022 Elsevier B.V.
الكلمات المفتاحية: 3D printing Alginate Antibacterial scaffolds Bone tissue regeneration Magnesium-oxide RVE simulation
Hasan H.A.; Togun H.; Abed A.M.; Qasem N.A.A.; Abderrahmane A.; Guedri K.; Eldin S.M.
Case Studies in Thermal Engineering , Vol. 49
47 استشهاد Article Open Access English ISSN: 2214157X
Ministry of Higher Education & Scientific Research, Department of Studies, Planning & Follow-up Baghdad, 10011, Iraq; Electromechanical Engineering Department, University of Technology, Baghdad, 10066, Iraq; Department of Biomedical Engineering, College of Engineering University of Thi-Qar, Thi-Qar, 64001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Aerospace Engineering and Interdisciplinary Research Center for Aviation & Space Exploration, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia; Laboratoire de Physique Quantique de la Matière et Modélisation Mathématique (LPQ3M), University of Mascara, Algeria; Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, P. O. Box 5555, Makkah, 21955, Saudi Arabia; Faculty of Engineering and Technology, Future University in Egypt, Egypt
Temperature is known to greatly affect the efficiency, security, and cycle life of lithium-ion battery (LiB) cells. LiB cells are delicate to changes in temperature by using a variety of nanofluids. This study uses a novel cooling system with a Re between 15 × 103 and 30 × 103 to lower the cells' temperature. Al2O3, CuO, SiO2, and ZnO with nanoparticles concentrations of 5% and nanoparticle diameters of 20 nm dispersed in a base liquid (water) are used to produce the effects. The findings demonstrate that as the Re rises, so does the Nusselt number. An innovative cooling system is designed and numerically tested to show how different kinds of nanofluids affect the increment in heat transmission and distribution of temperature in LiB cells. The temperature of LiB cells drops by flowing the water between the 52 batteries inside the cooling pack. For each spacing value, the Reynolds numbers are increased, which results in an increase in the average Nusselt numbers. According to the computational fluids dynamics results, the Nusselt number rises with increasing spacing. The results show that Re of 18000, 22000, 25000, 27500, and >30000 are needed for SiO2 nanofluids, Al2O3 nanofluids, ZnO nanofluids, CuO nanofluids, and pure water, respectively, to get battery pack temperature of <40 °C (the typical operating conditions). Higher Re values improve the heat transfer slightly with the expense of pumping power; therefore, Re of 18000 with SiO2 nanofluids is preferred. The utilization of nanofluids also shows that SiO2 exhibits the best thermal cooling for battery packs among all investigated nanofluids. Al2O3 nanofluid is also an excellent option, followed by ZnO nanofluid. For example, the temperature reduction of the hottest battery cell reaches >47, 44, 43, 42, and 42 °C for SiO2 nanofluids, Al2O3 nanofluids, ZnO nanofluids, CuO nanofluids, and pure water, respectively. © 2023 The Authors
الكلمات المفتاحية: Heat transfer enhancement Lithium-ion battery Nusselt number Saving energy Thermal performance
Wang F.; Nasajpour-Esfahani N.; Alizadeh A.; Fadhil Smaisim G.; Abed A.M.; Hadrawi S.K.; Aminian S.; Sabetvand R.; Toghraie D.
Journal of Molecular Liquids , Vol. 373
46 استشهاد Article English ISSN: 01677322
School of Electromechanical and Automobile Engineering, Yantai University, Shandong, Yantai, 264005, China; Georgia Institute of Technology, Department of Material Science and Engineering, 771 Ferst Dr NW, Atlanta, 30332, GA, United States; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; Department of Mechanical Engineering, University of Kurdistan, Sanandaj, Iran; Department of Energy Engineering and Physics, Faculty of Condensed Matter Physics, Amirkabir University of Technology, Tehran, Iran; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
This research studied the thermal performance of phase change material (PCM) microcapsules containing gold (Au) nanoparticles (NPs) in a nanochannel (NC) using molecular dynamics (MD) simulations. The MD simulation method is a reliable method for studying at micro and nano scales. In this simulation, the physical equilibrium was studied in the first stage by examining the simulated structure's kinetic and total energies. In the second stage, the thermal performance of simulated structure was surveyed. The thermal performance of structures was studied at different initial temperatures and initial pressure and the number of metal layers in NC shells. The results show that by increasing the initial temperature, the charging and discharging time, the viscosity and phase transition time decrease, and heat flux (HF) and thermal conductivity (TC) increase. Moreover, by changing the initial pressure (from 0 to 5 bar), the simulated samples' charging and discharging time, HF, and TC did not change much. This atomic behavior in the simulated samples shows that the simulated samples could operate without a drop in different initial conditions. The results indicate that by increasing the number of metal layers in the NC shells from 1 to 12, the force on fluid–structure increased, and consequently, the charging and discharging times increase to 2.54 ns and 3.40 ns. On the other hand, increasing the number of metal layers led to decreasing HF and TC of structures to 287.37 W/m2 and 1.18 W/m.K. Therefore, the dimensions of designed structures in atomic microcapsules to perform the heat transfer process were important. Increasing the shell thickness in these structures will reduce the heat transfer in the structures under study. © 2022 Elsevier B.V.
الكلمات المفتاحية: Microcapsules Molecular dynamics simulation Nanoparticles Phase change material Thermal behavior
Shojaeinasab Chatroudi I.; Atashafrooz M.; Mohammed H.I.; Abed A.M.; Talebizadehsardari P.
Frontiers in Energy Research , Vol. 11
42 استشهاد Article Open Access English ISSN: 2296598X
Department of Mechanical Engineering, Sirjan University of Technology, Sirjan, Iran; Department of Physics, College of Education, University of Garmian, Kalar, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Centre for Sustainable Energy Use in Food Chains, Institute of Energy Futures, Brunel University London, Uxbridge, United Kingdom
To overcome the weak conduction heat transfer of phase change materials (PCM), this investigation aimed to assess the behavior of a double-tube latent heat storage unit with circular fins through the charging process. The influence of free convection in the presence of fins of various arrangements and sizes was comprehensively studied. The geometrical characteristics of the fins, i.e., their size and number, were assessed to optimize their performance. Moreover, a sensitivity assessment was performed on the characteristics of the heat transfer fluid passing through the inner tube, i.e., the Reynolds number and temperature. Charging time diminished by 179% when nine 15 mm fins were added compared with the finless scenario, assuming the same phase change materials volume. Moreover, the system’s thermal recovery rate improved from 20.5 to 32.9 W when nine fins with the heigth of 15 mm were added. The use of more fins improved the thermal behavior of the phase change materials because of the higher total fin area. The melting time and heat storage rate changed by 76% and 71%, respectively, for the system with 19 fins compared with those with four fins. Moreover, the outcomes indicated that a higher heat storage rate can be achieved when the working medium’s faster flow and inlet temperature were used. Copyright © 2023 Shojaeinasab Chatroudi, Atashafrooz, Mohammed, Abed and Talebizadehsardari.
الكلمات المفتاحية: arcshaped fins double-tube latent thermal storage heat transfer enhancement melting process melting optimal fin design pcm phase change materials thermal energy storage
Mourad A.; Aissa A.; Abed A.M.; Toghraie D.; Akbari O.A.; Guedri K.; Younis O.; Marzouki R.
Alexandria Engineering Journal , Vol. 65, pp. 367-382
41 استشهاد Article Open Access English ISSN: 11100168
Laboratoire de Physique Quantique de la Matière et Modélisation Mathématique (LPQ3M), University of Mascara, Mascara, 29000, Algeria; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Young Researchers and Elite Club, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah, 21955, Saudi Arabia; Department Mechanical Engineering, College of Engineering in Wadi Addwasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Department of Mechanical Engineering, Faculty of Engineering, University of Khartoum, Sudan; Chemistry Department, College of Science, King Khalid University, P.O. Box 394, Abha, 61413, Saudi Arabia
In this work, the numerical investigation was conducted for the MHD natural convection and entropy generation characteristics of water-based hybrid nanofluid (Fe3O4-MWCNT) in a porous annulus between a cooled circular cylinder and a heated Koch snowflake subjected to a uniform magnetic force. The novelty of this work is presented by the special shape and different studied positions of the hot barrier. The governing equations are explained by employing the Finite Element Method. The impacts of nanoparticle volume fraction (φ = 2 %, 3%,4%, and 5 %), Rayleigh number (Ra = 103 to 106), Hartman number (Ha = 0,25,50,100), Darcy number (Da = 10-2, 10-3, 10-4, and 10-5), and the position of the Koch snowflake (four cases) on the distributions of isotherms, streamlines, average Nusselt number (Nuavg) as well as on total entropy generation and Bejan number are thoroughly examined. The computational outcomes indicate that increasing the Ra number is possible by changing the temperature between the hot and cold sources. By increasing this parameter, the buoyancy force of the fluid is strengthened. As the Da number increases, the penetration of the flow cross-section in the cavity increases, and the flow circulates in the cavity with less depreciation due to the buoyancy force. Applying Lorentz force, if not in the direction of natural flow, causes the flow velocity to be depleted and fluid flow in the cavity to be facilitated. With increasing Ra number, the application of Lorentz force with different intensities becomes important due to the importance of fluid circulation in the cavity. Applying a Lorentz force with a higher Ha number at high Ra numbers reduces heat transfer due to junction balance and flow separation on hot and cold surfaces. In the lower Ra numbers, the Bejan number tends to 1, indicating a significant increase in the temperature gradient in the cavity and the expansion of the thermal boundary layer at low fluid velocities. At the highest Ra, increasing Ha from 0 to 100 decreases Nuavg by 50 %, while decreasing Da from 10−2 to 10−5 reduces Nuavg by 70 %. © 2022 THE AUTHORS
الكلمات المفتاحية: Hybrid nanofluid Koch snowflake Magneto-hydrodynamic Natural convection Porous media Galerkin finite element technique
Al-Farhany K.; Alomari M.A.; Biswas N.; Laouer A.; Abed A.M.; Sridhar W.
International Communications in Heat and Mass Transfer , Vol. 144
41 استشهاد Article English ISSN: 07351933
Department of Mechanical Engineering, University of Al-Qadisiyah, Ad-Diwaniyah, 58001, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, Iraq; Department of Power Engineering, Jadavpur University, Salt Lake, Kolkata, 700106, India; Laboratory of Condensed Matter Physics and Nanomaterials, University Mohamed Seddik Benyahia, Jijel, 18000, Algeria; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mathematics, Koneru Lakshmaiah Education Foundation, Vaddeswaram, A.P., Guntur, 522502, India
This work numerically analyzes the mixed convective double diffusion of Fe3O4-water-based nanofluid in a tilt curvilinear lid-driven cavity studied under the effect of an inclined magnetic field. The horizontal upper wall is at a lower thermal and concentration gradient and moves toward the right. The side vertical walls and bottom walls kept adiabatic. Furthermore, two numbers of conducting fins are affixed to the inclined walls at high temperatures and concentrations. The finite element approach is implemented to analyze the considered variables: Richardson number (Ri), Hartmann number (Ha), Reynolds number (Re), Lewis number (Le), buoyancy ratio (N), magnetic inclination angle (α), nanofluid volume fraction (ϕ) as well as the fins length on the heat and mass transport phenomena. The results showed that the Nuavg and Shavg increase by increasing Reynolds number, the nanoparticles volume concentration, and the fin length, while they decrease by increasing Hartmann number. When Ri is small, Nuavg rises with the increasing magnetic field inclination, but when Ri is high, the inclination angle works adversely. On the other hand, the Shavg increases with the rise of the magnetic field inclination for all Ri values. It can be seen also, when Lewis number increases, the Nuavg and Shavg values increase with increasing Ri and magnetic inclination angles. © 2023
الكلمات المفتاحية: Curvilinear-enclosure Double diffusion Fins Heat and mass transfer Lid-driven Nanofluid
Tang J.; Ahmadi A.; Alizadeh A.; Abedinzadeh R.; Abed A.M.; Smaisim G.F.; Hadrawi S.K.; Nasajpour-Esfahani N.; Toghraie D.
Journal of Materials Research and Technology , Vol. 24, pp. 1390-1400
38 استشهاد Article Open Access English ISSN: 22387854
School of Engineering, Guangzhou College of Technology and Business, Guangdong, Foshan, 528100, China; Institute of New Generation Electronic Information Technology, Guangzhou College of Technology and Business, Guangdong, Foshan, 528100, China; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran
Metal matrix composites have various structural and thermal applications in terms of their unique mechanical and thermal properties compared to their counterparts. These nanoparticle (NP)-reinforced composites have received much attention due to their relatively low production costs and excellent mechanical properties. In the present research, modeling and studying the effects of adding reinforcing NP on the hardness of aluminium-based composites is done using the molecular dynamics (MD) simulation. The expressed structures' equilibration, temperature, and potential energy are calculated and reported in the first simulation stage. In this regard, the parameters of Lennard-Jones potential function for the particles in the MD simulation of aluminium and oxygen. Finally, the results show that the hardness of pure nanocomposite (NC) was equal to 100, and by adding NP with a mass ratio of 6%, the hardness of NC increased from 100 to 190 HV. The radial distribution function (RDF) showed that the composition was in the solid phase at a temperature of 300 K, indicating the proper balance of simulated atomic systems. The results show that the maximum value of RDF decreased by increasing the amount of reinforcement. The results show that the yield stress decreased as the volume fraction of reinforcement increased in the crystal structure. Finally, it is expected that the results obtained from MD simulations will be considered in the practical use of aluminium NCs reinforced with alumina nanoparticles in various industrial, engineering and medical uses. © 2023 The Author(s)
الكلمات المفتاحية: Al<sub>2</sub>O<sub>3</sub> nanoparticle Hardness Molecular dynamics simulation Nanocomposite
Hasan H.A.; Togun H.; Abed A.M.; Qasem N.A.A.; Mohammed H.I.; Abderrahmane A.; Guedri K.; Tag-ElDin E.S.M.
Symmetry , Vol. 15 (3)
37 استشهاد Article Open Access English ISSN: 20738994
Ministry of Higher Education and Scientific Research, Department of Studies, Planning and Follow-Up, Baghdad, 10011, Iraq; Electromechanical Engineering Department, University of Technology, Baghdad 10066, Iraq; Department of Biomedical Engineering, College of Engineering, University of Thi-Qar, Nassiriya 64001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon 51001, Iraq; Department of Aerospace Engineering and Interdisciplinary Research Center for Aviation and Space Exploration, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia; Department of Physics, College of Education, University of Garmian, Kalar 46021, Iraq; Laboratoire de Physique Quantique de la Matière et Modélisation Mathématique (LPQ3M), University of Mascara, Mascara 29000, Algeria; Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, Makkah 21955, Saudi Arabia; Faculty of Engineering and Technology, Future University in Egypt, New Cairo 11835, Egypt
The performance, safety, and cycle life of lithium-ion batteries (LiBs) are all known to be greatly influenced by temperature. In this work, an innovative cooling system is employed with a Reynolds number range of 15,000 to 30,000 to minimize the temperature of LiB cells. The continuity, momentum, and energy equations are solved using the Finite Volume Method (FVM). The computational fluid dynamics software ANSYS Fluent is applied to calculate the flow and temperature fields and to analyze the thermal management system for 52 LiB cells. The arrangement of batteries leads to symmetrical flow and temperature distribution occurring in the upper and lower halves of the battery pack. The impacts of SiO2 distributed in a base fluid (water) are investigated. The results show that SiO2 nanofluid with the highest volume fractions of 5% has the lowest average temperature values at all investigated Reynolds numbers. The innovative cooling system highlights the enhancement of the cooling process by increasing the SiO2 concentrations, leading to the recommendation of the concentration of 5 vol% due to better thermal diffusion resulting from the enhanced effective thermal conductivity. The flow turbulence is increased by increasing the Reynolds number, which significantly enhances the heat transfer process. It is shown that increasing the Re from 15,000 to 22,500 and 30,000 causes increases in the Nu value of roughly 32% and 65%, respectively. © 2023 by the authors.
الكلمات المفتاحية: cooling battery cooling system heat transfer improvement nanofluid nanoparticle concentrations SiO<sub>2</sub>-water thermal conductivity
Hai T.; Radman S.; Abed A.M.; Shawabkeh A.; Abbas S.Z.; Deifalla A.; Ghaebi H.
Process Safety and Environmental Protection , Vol. 172, pp. 57-68
35 استشهاد Article English ISSN: 09575820
School of Computer and Information, Qiannan Normal University for Nationalities, Guizhou, Duyun, 558000, China; College of Information and Artificial Intelligence, Nanchang Institute of Science and Technology, Nanchang, China; Institute for Big Data Analytics and Artificial Intelligence (IBDAAI), University Teknologi MARA, Selangor, Shah Alam, 40450, Malaysia; Department of Mechanical Engineering, urmia University of Technology, Urmia, Iran; Air conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; College of Engineering and Technology, American University of the Middle East, Kuwait; Department of Mathematics & Statistics, Hazara University, Mansehra, Pakistan; Full professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Department of Mechanical Engineering, University of Mohaghegh Ardabili, P.O. Box 179, Ardabil, Iran
An innovative multi-generation energy system is proposed to generate simultaneous power, drinking water, cooling, heating, and H2. The aimed plant comprised of an absorption chiller, a heat pump unit, a reverse osmoses unit, a double flash cycle, and a proton exchange membrane. The devised system is surveyed comprehensively based on the thermodynamic, thermo-economic, and exergoenvironmental indicators for offering an in-depth assessment of the plant. Besides, multi-objective optimization has been employed in the proposed system. The net proportions of output work, unit cost, thermal and exergetic efficiencies, and H2, and purified water production of the system are 99.25 kW, 124 $/GJ, 24.4%, 32.1%, 1.218 kg/h, and 0.9662 kg/s, separately. The outcomes related to thermodynamic and thermo-economic evaluations demonstrate that the greatest amount of total cost rate occurred in the first employed turbine. Owing to the findings of the parametric study, by increasing geothermal temperature, exergoenvironmental parameters are reduced, and with increasing the pressure of FT1, cooling load and energetic efficiency increase while SUCP, net output work, and exergetic efficiency decrease dramatically. © 2023 The Institution of Chemical Engineers
الكلمات المفتاحية: Absorption chiller Environmental Geothermal energy Heat pump Optimization
Hai T.; B Mansir I.; Alshuraiaan B.; M Abed A.; Elhosiny Ali H.; Dahari M.; Albalawi H.
Case Studies in Thermal Engineering , Vol. 45
34 استشهاد Article Open Access English ISSN: 2214157X
School of Computer and Information, Qiannan Normal University for Nationalities, Guizhou, Duyun, 558000, China; College of Information and Artificial Intelligence, Nanchang Institute of Science and Technology, Nanchang, China; Institute for Big Data Analytics and Artificial Intelligence (IBDAAI), Universiti Teknologi MARA, Selangor, Shah Alam, 40450, Malaysia; Department of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Centre for Energy Research and Training, Ahmadu Bello University, P.M.B 1045, Zaria, Nigeria; Department of Mechanical Engineering, Kuwait University, Safat, 13060, Kuwait; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia; Deparment of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; Department of Physics, College of Sciences, Princess Nourah Bint Abdulrahman University (PNU), P.O. Box 84428, Riyadh, 11671, Saudi Arabia
This work investigates the performance enhancement of a solar air heater using inclined impinging jets on the heater surface. Two main sets of arrangements are considered for the jet nozzles including the parallel and crossing orientation of nozzles in consecutive rows. The RNG k − ɛ model is employed to simulate the turbulent flow in the channel. The influence of different geometrical and operational parameters such as jet diameter ratio (Dj/Dh), inclination angle (α,β), stream wise pitch ratio (L/Dh), span wise pitch ratio (S/Dh), Re number and velocity ratio (Vr) on the hydraulic and thermal behavior of jet solar air heater was studied. Results showed that the proposed jet solar air heater improved the Nu number and thermohydraulic performance parameter compared to the conventional unimproved solar air heater. For the studied range of parameters, up to 4.26 times higher Nu number was obtained using the jet impingement compared to the smooth duct solar air heater. Moreover, it was shown that the amount of velocity ratio (Vr) is a significant factor when comparing the parallel and crossing orientations. Additionally, results indicated that the increment of stream wise and span wise pitch led to the increment of the Nu number while having a minor effect on the friction factor. For example, the increment of L/dh from 0.3 to 0.6 leads to the reduction of f/fs of case 1 and case 4 by 6.5% and 1.09%, respectively Also, the increment of the jet diameter first raises the thermohydraulic performance parameter, and then with a further increment of diameter, the amount of thermohydraulic performance parameter decreases. © 2023 The Authors
الكلمات المفتاحية: Inclined jets Jet solar air heater Nozzle orientation Thermal performance
Sarlak R.; Abed A.M.; Akbari O.A.; Marzban A.; Baghaei S.; Bayat M.
Progress in Nuclear Energy , Vol. 155
32 استشهاد Review English ISSN: 01491970
Department of Mechanical Engineering, Aligudarz Branch, Islamic Azad University, Aligudarz, Iran; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Young Researchers and Elite Club, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
In this study, laminar flow & natural convection heat transfer of water/Single Wall Carbon Nanotubes (SWCNT) nanofluid in a triangular cavity is simulated using the finite volume method. The cold temperature of the triangular cavity is due to the forced flow of cool pure water flowing above the cavity, and the hot source with temperature Th is at the bottom of the cavity. The present study aims at cooling triangular cavities with fixed bases and different angles of attack or heights, installed in a rectangular channel. This study is done for the solid nanoparticles volume fraction of φ = 0–0.06, angle of attack of 15–60°, and Rayleigh number of Ra = 10. Results show that the temperature gradient between the hot and cold sources in the cavity increases the temperature gradients. Depending on the dominant heat transfer mechanism in the cavity, the temperature distribution will differ. By increasing the angle of attack, the cavity temperature gradients increase. By adding fluid injection in the cavity & increasing solid nanoparticles volume fraction (φ), it is possible to improve heat transfer. Friction occurs in areas with high-velocity gradients and at the start and end of the warm plate. At the middle of the plate, due to the separation of the vortex from the hot surface, the friction factor is reduced. Increasing φ results in higher cooling fluid viscosity and density which has a higher momentum dissipation rate. The most heat absorption from the hot surface occurs at the point where the cooling fluid reaches the hot surface, and the vortices are symmetric for all angles of attack. By placing the cavity in the channel, changing the cavity angle and increasing heat flux are more effective than increasing solid nanoparticles in higher φ values for improving heat transfer. © 2022 Elsevier Ltd
الكلمات المفتاحية: Angle of attack Heat transfer Nanofluid Nusselt number Triangular cavity
Chen Y.; Alizadeh A.; Abed A.M.; Nasajpour-Esfahani N.; Smaisim G.F.; Hadrawi S.K.; Zekri H.; Sabetvand R.; Toghraie D.
Journal of Molecular Liquids , Vol. 373
31 استشهاد Article English ISSN: 01677322
Chongqing Academy of Governance, Jiulongpo District, Chongqing, 400039, China; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Georgia Institute of Technology, Department of Material Science and Engineering, 771 Ferst Dr NW, Atlanta, 30332, GA, United States; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; College of Engineering, The American University of Kurdistan, Duhok, Iraq; Department of Mechanical Engineering, College of Engineering, University of Zakho, Zakho, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Energy Engineering and Physics, Faculty of Condensed Matter Physics, Amirkabir University of Technology, Tehran, Iran
Today, the problems, such as the environmental pollution caused by the consumption of fossil fuels, which have disrupted the ecological conditions and created environmental risks, as well as the limited reserves of fossil fuels, have caused countries worldwide to pay more attention to this type of energy. Biofuels are a type of fuel obtained from biomass sources. Biodiesel is one of the fuels produced from natural and renewable sources, which does not harm the environment. On the other hand, the presence of nanoparticles in alternative fuels is particularly important because adding nanoparticles reduces the ignition delay. This study investigated the effect of different nanoparticles, such as copper oxide (CuO) and aluminium oxide (Al2O3), on methyl ester-biodiesel (as base fluid) fuel's combustion performance. The following investigated the effects of different volume fractions of CuO nanoparticles. This research used the molecular dynamics (MD) simulation, and the LAMMPS software package. The results show that CuO nanoparticles had better thermal performance than Al2O3 nanoparticles. By adding Al2O3 and CuO nanoparticles to the base fluid, the heat flux of the simulated nanofluid converged to a numerical value of 2410.31 W/m2 and 2410.31 W/m2, respectively. Because CuO nanoparticles show better thermal performance than Al2O3 nanoparticles, the effect of the volume fractions of CuO nanoparticles on the thermal performance of the studied nanofluid was investigated. For this purpose, CuO nanoparticles with atomic ratios of 1%, 2%, 3%, 5% and 10% were added to the base fluid. The results reveal that the heat flux in atomic samples reached 4448.89 W/m2 in the presence of 10% CuO nanoparticles. It is expected that by optimizing this process, the combustion performance of fuels will be improved, fuel consumption will be optimized, and the emission of pollutants will be reduced. © 2023 Elsevier B.V.
الكلمات المفتاحية: Aluminum oxide Combustion Copper oxide Heat flux Methyl ester-biodiesel Molecular dynamics
Smaisim G.F.; Abed A.M.; Alavi H.
International Journal of Low-Carbon Technologies , Vol. 18, pp. 38-48
31 استشهاد Article Open Access English ISSN: 17481317
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq; Department of Mechanical Engineering, Faculty of Engineering, Mashhad Branch, Islamic Azad University, Mashhad, Iran
The major and challengeable restriction facing coal power plants (CPPs) is the emission of polluting gases caused by burning coal. Therefore, adopting the reasonable and practical solutions toward mitigate the emission of pollutants is needful. The integration of renewable technologies and energies with such plants can be possible in achieving higher efficiency and mitigating emissions. In the current research, the thermodynamic assessment and analysis of pollutant emission reduction in a CPP using renewables is developed. In this regard, a molten carbonate fuel cell (MCFC) and a solar farm (based on parabolic dish collectors, PDCs) are integrated with CPP. Developed CPP can generate electric power and domestic hot water (DHW). In addition to MCFC, two gas and steam turbines have been installed in CPP to generate electricity. The planned CPP is primarily coal-driven; however, it has been integrated with renewables units to reduce the environmental hazards caused by burning coal. According to the findings yielded from the simulation, the planned CPP has energy and exergy efficiencies equal to 72.5% and 43.85%, respectively. It was also estimated that CPP could generate around 205.5 MW of electricity and 1027.5 kg of DHW per second. Additionally, the amount of gases released from CPP was estimated approximately equal to 0.116 t/s. On average, the required number of collectors in solar units A and B should be almost 89.9 and 25.4, respectively. The performance of CPP when using Powder River Basin coal (PRBC) has been also compared with the performance of the plant when using petcoke. © 2023 Crown copyright.
الكلمات المفتاحية: coal power plant emission reduction fuel cell renewable nergy solar energy
Alzahrani A.; Hafeez G.; Ali S.; Murawwat S.; Khan M.I.; Rehman K.; Abed A.M.
Sustainability (Switzerland) , Vol. 15 (13)
31 استشهاد Article Open Access English ISSN: 20711050
Electrical Engineering Department, College of Engineering, Najran University, Najran, 11001, Saudi Arabia; Department of Electrical Engineering, University of Engineering and Technology, Mardan, 23200, Pakistan; Department of Telecommunication Engineering, University of Engineering and Technology, Mardan, 23200, Pakistan; Department of Electrical Engineering, Lahore College for Women University, Lahore, 51000, Pakistan; Department of Electrical Engineering, University of Engineering and Technology, Peshawar, 25000, Pakistan; Department of Electrical Engineering, CECOS University of IT and Emerging Sciences, Peshawar, 25100, Pakistan; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
Multi-objective energy optimization is indispensable for energy balancing and reliable operation of smart power grid (SPG). Nonetheless, multi-objective optimization is challenging due to uncertainty and multi-conflicting parameters at both the generation and demand sides. Thus, opting for a model that can solve load and distributed energy source scheduling problems is necessary. This work presents a model for operation cost and pollution emission optimization with renewable generation in the SPG. Solar photovoltaic and wind are renewable energy which have a fluctuating and uncertain nature. The proposed system uses the probability density function (PDF) to address uncertainty of renewable generation. The developed model is based on a multi-objective wind-driven optimization (MOWDO) algorithm to solve a multi-objective energy optimization problem. To validate the performance of the proposed model a multi-objective particle swarm optimization (MOPSO) algorithm is used as a benchmark model. Findings reveal that MOWDO minimizes the operational cost and pollution emission by 11.91% and 6.12%, respectively. The findings demonstrate that the developed model outperforms the comparative models in accomplishing the desired goals. © 2023 by the authors.
الكلمات المفتاحية: batteries demand response distributed generation multi-objective optimization smart grid solar wind
Zhang G.; Liu J.; Pan X.; Abed A.M.; Le B.N.; Ali H.E.; Ge Y.
International Journal of Hydrogen Energy , Vol. 48 (55), pp. 20988-21003
31 استشهاد Article English ISSN: 03603199
Department of Digital Media Technology, Hangzhou Dianzi University, Hangzhou, 310018, China; Logistics Service Center, Zhejiang Gongshang University, Hangzhou, 310018, China; School of Information Management and Artificial Intelligence, Zhejiang University of Finance and Economics, Hangzhou, 310018, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Institute of Research and Development, Duy Tan University, Da Nang, Viet Nam; Advanced Functional Materials & Optoelectronic Laboratory (AFMOL), Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, 61413, Saudi Arabia; Research Center for Advanced Materials Science (RCAMS), King Khalid University, P.O. Box 9004, Abha, 61413, Saudi Arabia; Physics Department, Faculty of Science, Zagazig University, Zagazig, 44519, Egypt; College of Computer Science and Artificial Intelligence, Wenzhou University, Wenzhou, 325100, China; School of Engineering & Technology, Duy Tan University, Da Nang, Viet Nam
The limited resources of fossil fuels and bio energies, along with the environmental pollution caused by their combustion, make it necessary to search for renewable and clean alternative sources and to optimize the available current energies specifically for required energy for using in buildings. This is mandatory for a solution of future energy production issues as huge consumption of energy in buildings and structures is unavoidable in buildings for instance China's higher education buildings consume huge amounts of bioenergy. Most of the attention in the production of biofuel has been focused on the use of plant biomass, agricultural waste, solid waste, and sewage treatment sludge. Today, there are renewable resources to replace fossil fuels such as biofuels for usage in buildings required energy; however, in the last decade, the cultivation of microalgae has been proposed as another option for biomass production. Utilization of algae biomass is more cost-effective than vegetable crops in terms of water consumption and cultivated area and reduces costs and greenhouse gas emissions by replacing fossil fuels. Artificial intelligence is a tool to help for this utilization and becoming much better in recent researches. Many types of microalgae, due to their high ability to consume organic carbon and inorganic nitrogen and phosphorus, can grow in different water environments, including urban, industrial, agricultural wastewaters, and wastewaters containing animal waste, which contain large amounts of organic and inorganic carbon. There are nitrogen, phosphorus and other elements that act as a biological filter that with extensive studies and inventing new methods, cost-effective production of algae-biofuels can be achieved. This review goals to run over the latest innovations and artificial intelligence approaches for biohydrogen generation from algal towards sustainable energy optimization and greener environment for buildings required energy. The current state of the art, existing and upcoming challenges, latest technologies, and solutions to overcome existing limitation are presented in details. © 2022 Hydrogen Energy Publications LLC
الكلمات المفتاحية: Algal Artificial intelligence Biofuel Biohydrogen Biomass Energy optimization
Mir S.; Abed A.M.; Ali Akbari O.; Mohammadian A.; Toghraie D.; Marzban A.; Mir S.; Montazerifar F.; Bemani R.; Fadhil Smaisim G.
Alexandria Engineering Journal , Vol. 66, pp. 707-730
30 استشهاد Article Open Access English ISSN: 11100168
Department of Mechanical Engineering, Aligoudarz Branch, Islamic Azad University, Aligoudarz, Iran; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Young Researchers and Elite Club, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, 84156-83111, Iran; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Mechanical Engineering, University of Science and Culture, Tehran, Iran; Department of Mechanical Engineering, Bushehr Branch, Islamic Azad University, Bushehr, Iran; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq
In the present research, heat transfer behavior and Ag/water two-phase laminar nanofluid flow as cooling fluid in volume fraction of nanoparticles 0–6 % and Reynolds numbers of 200–500 in a tube with curvature angle of 270° are simulated utilizing finite volume method. 3-D simulations of laminar mixed convection two-phase nanofluid flow considering Grashof numbers of 5,000, 50,000 and 100,000 are carried out numerically. The results of the present research indicate that adding solid nanoparticles causes periodic behavior with particular repeat length on the axial velocity profile and maximum and minimum values shift every 60°. Also, after the curvature angle of 30° because of fluid motion, centrifugal forces importance, fluid rotation, and hydrodynamic field, local friction factor increases considerably up to channel outlet. In all diagrams, the maximum friction factor is related to the Grashof number of 100,000, this value will have more significant augmentation by the increase of volume fraction. Due to better fluid mixing and increase of temperature line slop at Reynolds number of 500, heat transfer enhances at the regions of the bottom bend of the channel. Higher volume fractions of nanoparticles reinforce the heat transfer mechanism and heat absorption from the hot surface. In the regions where fluid is influenced by thermal boundary layer growth, entropy generation is augmented. This entropy generation is due to heat transfer. On the other hand, entropy generation is reduced in the regions where the effect of inlet fluid temperature is dominated. © 2022 THE AUTHORS
الكلمات المفتاحية: Entropy Mixed heat transfer Nanofluid Numerical study Tube
Jery A.E.; Khudhair A.K.; Abbas S.Q.; Abed A.M.; Khedher K.M.
Geothermics , Vol. 107
29 استشهاد Article English ISSN: 03756505
Department of Chemical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; National Engineering School of Gabes, Gabes University, Ibn El Khattab Street, Zrig Gabes, Gabes, 6029, Tunisia; Ministry of Higher Education and Scientific Research, Baghdad, Iraq; Department of Medical Instruments Engineering Techniques, Al-turath University College, Baghdad, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Civil Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Civil Engineering, High Institute of Technological Studies, Mrezgua University Campus, Nabeul, 8000, Tunisia
Since the world is facing an energy crisis, and the emission of carbon-based fuel combustion is causing global warming, more research has been devoted to studying renewable energies. Due to the broad use of geothermal heat exchangers in central air-conditioning systems and also as a direct source of energy, in the present study, we have conducted a simulation of a geothermal heat exchanger and investigated the optimal diameter and nanoparticle concentration in order to minimize entropy generation. The fluid flow is turbulent, and SST K−ε is utilized as the turbulence model. The results show that as the thermal resistance of the inner wall increases, the outlet temperature rises. The effects of thermal resistance and diameter are thoroughly investigated, and the results have been used for selecting the least entropy generation. The results showed that the diameter in which the entropy is minimized increases by increasing the inner wall's thermal resistance. The best case is high thermal resistance in the outer walls and meager resistance in the inner walls. Using inner walls with high thermal resistance can decrease the adverse effects of entropy generation in large diameters. Also, the addition of nanoparticles is investigated, and the average Nusselt number and entropy generation, respectively, increased and decreased by almost 10%. Artificial neural network models are proposed to predict Nusselt number and entropy generation based on numerical results. The models are able to achieve MAE of lower than 3% and R2 higher than 0.95. © 2022
الكلمات المفتاحية: Artificial neural networks Entropy generation Geothermal heat exchanger Machine learning Nanofluid Turbulent flow
Liang X.; Kumar N.B.; Mansir I.B.; Kumar Singh P.; Abed A.M.; Dahari M.; Nasr S.; Albalawi H.; Cherif A.; Wae-hayee M.
Case Studies in Thermal Engineering , Vol. 44
28 استشهاد Article Open Access English ISSN: 2214157X
Xinyang Vocational and Technical College, Henan, Xinyang, 464000, China; Electrical and Electronics Engineering, Vignan's Foundation for Science Technology and Research, Guntur, India; Department of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Centre for Energy Research and Training, Ahmadu Bello University, P.M.B 1045, Zaria, Nigeria; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, UP, Mathura, 281406, India; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Deparment of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; Department of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Physics, College of Sciences, Princess Nourah Bint Abdulrahman University (PNU), P.O. Box 84428, Riyadh, 11671, Saudi Arabia; Physics Department, College of Science, Jouf University, P.O. Box: 2014, Sakaka, Saudi Arabia; Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hatyai, Songkhla, 90110, Thailand
It is common to use micro-channel heat sinks (MCHSs) in equipment such as; ICs, transistors, LEDs, and high-power lasers, which generate heat due to the passage of electric current. This heat is often a menace to harm these devices and their internal parts. For this reason, heat rejection in the MCHSs is an endless challenge for researchers. Placing vortex generators (VGs) within the MCHS improves the cooling capacity but incurs a considerable pressure drop. Meanwhile, the shape, geometric dimensions, and arrangement of the VGs significantly affect this heat transfer. In the current study, the placement angle (θ), the longitudinal distance (dl), and the transverse distance (dt) of the VGs were chosen to be altered. The Artificial Neural Networks (ANN) and Response Surface Methodology (RSM) were exerted to study their variation's effect on the Nusselt number (Nu) and pressure drop (ΔP) of an MCHS. The presented data illustrated that the results of the ANN model were closer to the data provided by the numerical simulation. With the coefficient of determination of 0.995 and 0.992 in forecasting the Nu and ΔP, the ANN exhibited better performance than the RSM model. Besides, the ANN model recommended that to acquire the highest relative efficiency index, the optimum values of placement angle, the longitudinal and transverse distances of the VGs should be 60, 0.151 mm, and 0.166 mm, respectively. © 2023 The Authors
الكلمات المفتاحية: Cooling capacity Heat transfer Hydraulic characteristics Micro-channel heat sink Relative efficiency index
Fathollahi R.; Alizadeh A.; Kamaribidkorpeh P.; M. Abed A.; Pasha P.
Alexandria Engineering Journal , Vol. 69, pp. 207-219
27 استشهاد Article Open Access English ISSN: 11100168
Department of Engineering, Faculty of Khoy, Urmia University of Technology, Iran; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq; School of Mechanical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Mechanical Engineering, Mazandaran University of Science and Technology, Babol, Iran
In this essay, the impact of magnetism amplitude on two-dimensional squeezing nanoparticle stream betwixt two equidistant sheets is inspected. The novelty of this research the dimensionless values of various fluids, such as Prandtel number and friction coefficient, influence the investigation of the velocity and heat transfer parameters of aluminum oxide nanofluid. Three mathematical techniques—AGM, HPM, and NUM—have been used in these experiments, and the outcomes and graphs have been computed and compared using these techniques. The non-dimensioned differential equations have been solved using three methods: Akbari-Ganji Method, Homotopy Perturbation Method, and Numeric technique. A comparison is then made between the resolutions of the presented strategies with the numeric approach in a separate chart. We arrived at the generalization that as the Prandtl number increases, the temperature and thermal of the nanofluid flow increase and its concentration drops, and as the Nusselt number declines. This was done by examining the results of the numerical model that was used to solve the equations. As S is increased, it is seen that the temperature drops while the concentration rises. The Nusselt number has increased in value following the growth in permeability value. Displacement increases along with the heat transfer coefficient. © 2022 THE AUTHORS
الكلمات المفتاحية: Akbari-Ganji Method (AGM) Homotopy perturbation Method (HPM) Magnetohydrodynamic Al2O3-water flow Nusselt number Radiation effects Squeezing sheets
Alizadeh A.; Abed A.M.; Zekri H.; Smaisim G.F.; Jalili B.; Pasha P.; Ganji D.D.
Alexandria Engineering Journal , Vol. 69, pp. 383-402
27 استشهاد Article Open Access English ISSN: 11100168
Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Babylon, 51001, Iraq; Department of Mechanical Engineering, College of Engineering, University of Zakho, Kurdistan Region, Zakho, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Department of Mechanical Engineering, Faculty of Engineering, North Tehran Branch, Islamic Azad University, Tehran, Iran; Department of Mechanical Engineering, Noshirvani University of Technology, Babol, Iran; College of Engineering, The American University of Kurdistan, Duhok, Iraq; Department of mechanical engineering, Mazandaran university of science and technology, Babol, Iran
The principal moot point in this investigation is heat removal from surfaces with high heat flux, which is the use of tabulators and parts with a particular geometry, it has been chosen as a solution to this moot point. The primary hypothesis in this investigation is to increase fluid heat transfer by increasing turbulence and heat transfer by increasing the plane of heat transfer and establishing a vortex flow. The fundamental idea and novelty of this investigation is the simultaneous use of a turbulator (to improve turbulence and provide more effective heat transmission) and increasing the contact surface (through the installation of parts with unique geometry), which can be obtained from different turbulator used in other geometries. In this research, the limited volume method to solve governing equations in three-dimensional space and Cartesian coordinates has been used on the network using Ansys Fluent software. In order of comparison, turbulators SLT and then TRT is compared to other turbulators (TRT, SHT, RET) It has the highest Nusselt number, and in the Reynolds numbers in the turbulent flow regime, they have the most significant reduction in the friction coefficient. © 2023 THE AUTHORS
الكلمات المفتاحية: Finite volume method Heat transfer Nusselt number Reynolds number Turbulent flow
Alzahrani A.; Hafeez G.; Rukh G.; Murawwat S.; Iftikhar F.; Ali S.; Haider S.I.; Khan M.I.; Abed A.M.
IEEE Access , Vol. 11, pp. 33640-33651
26 استشهاد Article Open Access English ISSN: 21693536
Najran University, College of Engineering, Electrical Engineering Department, Najran, 11001, Saudi Arabia; University of Engineering and Technology, Department of Electrical Engineering, Mardan, 23200, Pakistan; Lahore College for Women University, Department of Electrical Engineering, Lahore, 54000, Pakistan; University of Engineering and Technology, Department of Telecommunication Engineering, Mardan, 23200, Pakistan; King Saud University, College of Computer and Information Sciences, Riyadh, 11543, Saudi Arabia; University of Engineering and Technology, Department of Electrical Engineering, Peshawar, Peshawar, 25000, Pakistan; Al-Mustaqbal University College, Air Conditioning and Refrigeration Techniques Engineering Department, Babylon, 51001, Iraq
Demand response (DR) shaves peak energy consumption and drives energy conservation to ensure reliable operation of power grid. With the emergence of the smart power grid (SPG), DR has become increasingly popular and highly contributes to energy optimization. On this note, in this work, DR is adopted for scheduling home appliances to reduce utility bill payment, peak to average demand ratio (PADR), and discomfort. First, home appliances are classified into two categories according to time and power flexibility: time-flexible and power-flexible. Secondly, the demand-side users power usage scheduling problem is modelled as per the user priority and modes of operation considering demand and supply. Finally, the energy consumption scheduler (ECS) is developed to adjust the time and power of both types of appliances under different operation modes to acquire desired tradeoff between utility bills payment and discomfort, and PADR and discomfort. Simulation results depict that employing the proposed ECS benefits demand-side users by minimizing their utility bills payment, PADR, and achieving the desired tradeoff between utility bill payment and discomfort, and PADR and discomfort. Results illustrate that developed model reduced utility bill payment and alleviated PADR without compromising comfort by 28% and 21%, respectively, compared to without scheduling case. © 2013 IEEE.
الكلمات المفتاحية: appliances scheduling Demand response optimization pricing signals smart grid
Yi S.; Abed A.M.; Deifalla A.; Riaz M.; Alsenani T.R.; Elattar S.; Yulei C.; Sulaie S.A.
Process Safety and Environmental Protection , Vol. 176, pp. 271-291
26 استشهاد Article English ISSN: 09575820
School of Finance, Anhui University of Finance & Economics, Bengbu, 233030, China; Air conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Full professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Department of Mathematics, Quaid-i-Azam University, Islamabad, 44000-45320, Pakistan; Department of Electrical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Industrial & Systems Engineering, College of Engineering, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam; Department of Industrial Engineering, College of Engineering in Al-Qunfudah, Umm Al-Qura University, Makkah, 21955, Saudi Arabia
This study is motivated to propose, evaluate, and optimize a solar-based multigeneration system relying on consecutive heat integration. Here, a heliostat field is configured to collect solar power and supply high-temperature air toward a nitrogen-based Brayton cycle. Afterward, the output hot air is subjected to a Kalina cycle suitable for medium-temperature heat resumption. A double-effect absorption refrigeration cycle boosted by a Liquid-based natural gas cold energy recovery unit for power generation and natural gas regasification are the other subsystems. The principal purpose is to protect the energy level of the fluid evacuating the solar field and to minimize the irreversibility of the scheme since solar-based systems lead to major irreversibility. The designed process is apprised from a 3E perspective, including exergy, energy, and exergoeconomic analyses. In addition, a comprehensive sensitivity study is done based on the influence of effective factors on the exergy and energy efficiencies and unit cost of products. Eventually, a multi-objective optimization is performed to set the most suitable condition of decision parameters and reach the optimal unit cost of products and exergy performance (objective functions). To do optimization, a genetic algorithm is applied, and two decision-making approaches, i.e., LINMAP and TOPSIS, are regarded. The optimal objectives are gauged to be 24.76% and 15.90 $/GJ by TOPSIS and 24.47% and 15.73 $/GJ by LINMAP, respectively. © 2023 The Institution of Chemical Engineers
الكلمات المفتاحية: 3E analysis Liquefied natural gas Multi-generation Multi-objective optimization Nitrogen-based Bryton cycle Solar energy
Liu J.; Zhou F.; Abed A.M.; Le B.N.; Dai L.; Elhosiny Ali H.; Khadimallah M.A.; Zhang G.
Fuel , Vol. 336
25 استشهاد Article English ISSN: 00162361
Logistics Service Center, Zhejiang Gongshang University, Hangzhou, 310018, China; Digitalization Office, Zhejiang Gongshang University, Hangzhou, 310018, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Institute of Research and Development, Duy Tan University, Da Nang, Viet Nam; School of Engineering & Technology, Duy Tan University, Da Nang, Viet Nam; Department of Digital Media Technology, Hangzhou Dianzi University, Hangzhou, 310018, China; Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia; Physics Department, Faculty of Science, Zagazig University, Zagazig, 44519, Egypt; Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha, 61413, P.O. Box 9004, Saudi Arabia; Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia
The increase in the world's population and the demand for energy has increased the need to use different sources of energy generation. On the other hand, the use of fossil fuels, which is currently considered the main source of energy around the world, has led to the production of a high amount of environmental pollution and the reduction of natural fuel resources. Therefore, the use of biofuels and renewable as a potential and clean source is a very attractive alternative. Currently, macroalgae are cultivated for various industrial and food purposes in different regions of the world. Due to the high number of compounds such as carbohydrates, lipids, and proteins, macroalgae can be a suitable source to produce biofuels. There are various biotechnological methods to produce energy from macroalgae. These methods are divided into two general categories of biochemical processes such as fermentation and anaerobic digestion and thermochemical processes such as burning, pyrolysis and hydrothermal liquefaction. In these methods, depending on the type of method, valuable gaseous, liquid, and solid compounds are produced that have many applications. This review focuses on the methods and studies conducted on energy generation from different species of macroalgae and develop various applications of artificial intelligence to produce biofuel from this type of algae and also identify the challenges towards a sustainable environment and offers different solutions to overcome the existing challenges. © 2022
الكلمات المفتاحية: Artificial intelligence Biofuel Biomass Macroalgae Sustainable energy Sustainable environment
Tahmasebi A.; Abed A.M.; Aghaei A.; Izadi F.; Malekshah E.H.; Aybar H.Ş.
Engineering Analysis with Boundary Elements , Vol. 150, pp. 318-328
23 استشهاد Article English ISSN: 09557997
Research and Development Department, Petro Artan Part Company, Tehran, Iran; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran; Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran; Department of Power Engineering and Turbomachinery, Silesian University of Technology, Gliwice, 44-100, Poland; Department of Mechanical Engineering, Eastern Mediterranean University, TRNC, via Mersin 10, Turkey; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
This research study examines the impact of applying a twisted tape on thermo-hydraulic performance as well as entropy generation related to the turbulent flow of mono and hybrid magnetic nanofluids inside a parabolic solar collector (PSC) absorber tube. In this study, two-phase water/multi-walled carbon nanotubes (MWCNTs) nanofluid and two-phase water/MWCNT-iron oxide nanofluid having the 1% volume fraction (VF) are applied as the working fluid. To model two-phase flow, the mixture model standard k-ε turbulence model and QUICK algorithm are utilized. This research study is implemented for diverse Reynolds numbers of 6000 to 24000 and some twisted tape's pitch ratios including 0.25, 0.50, and 0.75. In addition, the standard k-ε turbulence model is then applied for modeling the turbulent flow. The obtained results obtained by the numerical study demonstrate that using the twisted tape in solar collectors could improve thermo-hydraulic performance in comparison to the solar collector with no particular twisted tape. Also, the considered HT related to the collector having twisted tape is more than that without twisted tape in all cases, i.e., thermo-hydraulic performance coefficient is always greater than 1. The results reveal that using magnetic hybrid nanofluid leads to better thermal performance than mono nanofluid. Finally, the entropy generation is reduced with the Reynolds number as well as the pitch ratio of the twisted tape. The highest value in PEC surge was about 27% owing to using of magnetic hybrid nanofluid, while for simple nanofluid, it was 22%. According to this case, the use of magnetic hybrid nanofluid is recommended. © 2023 Elsevier Ltd
الكلمات المفتاحية: Entropy generation Magnetic hybrid nanofluid Solar collector Twisted tape Two-phase flow
Wang H.; Alizadeh A.; Abed A.M.; Piranfar A.; Smaisim G.F.; Hadrawi S.K.; Zekri H.; Toghraie D.; Hekmatifar M.
Computers in Biology and Medicine , Vol. 158
23 استشهاد Article English ISSN: 00104825
Department of Applied Engineering, Zhejiang Business College, Zhejiang, Hangzhou, 310053, China; Key Laboratory of Modern Acoustics (MOE), Department of Physics, Collaborative Innovation Centre of Advanced Microstructure, Nanjing University, Jiangsu, Nanjing, 210093, China; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, K. N. Toosi University of Technology, Tehran, Iran; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; College of Engineering, The American University of Kurdistan, Kurdistan Region, Duhok, Iraq; Department of Mechanical Engineering, College of Engineering, University of Zakho, Kurdistan Region, Zakho, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Khomeinishahr, Iran
Background and objective: The molecular dynamics (MD) simulation is a powerful tool for researching how cancer patients are treated. The efficiency of many factors may be predicted using this approach in great detail and with atomic accuracy. Methods: The MD simulation method was used to investigate the impact of porosity and the number of cancer cells on the atomic behavior of cancer cells during the hematogenous spread. In order to examine the stability of simulated structures, temperature and potential energy (PE) values are used. To evaluate how cell structure has changed, physical parameters such as gyration radius, interaction force, and interaction energy are also used. Results: The findings demonstrate that the samples' gyration radius, interaction energy, and interaction force rose from 41.33 Å, −551.38 kcal/mol, and −207.10 kcal/mol Å to 49.49, −535.94 kcal/mol, and −190.05 kcal/mol Å, respectively, when the porosity grew from 0% to 5%. Also, the interaction energy and force in the samples fell from −551.38 kcal/mol and −207.10 kcal/mol to −588.03 kcal/mol and −237.81 kcal/mol Å, and the amount of gyration radius reduced from 41.33 to 37.14 Å as the number of cancer cells rose from 1 to 5 molecules. The strength and stability of the simulated samples will improve when the radius of gyration is decreased. Conclusions: Therefore, high accumulation of cancer cells will make them resistant to atomic collapse. It is expected that the results of this simulation should be used to optimize cancer treatment processes further. © 2023 Elsevier Ltd
الكلمات المفتاحية: Atomic behavior Cancer Molecular dynamics simulation Porosity Volume fraction
Deghoum K.; Gherbi M.T.; Sultan H.S.; Jameel Al-Tamimi A.N.; Abed A.M.; Abdullah O.I.; Mechakra H.; Boukhari A.
Applied System Innovation , Vol. 6 (2)
22 استشهاد Article Open Access English ISSN: 25715577
UDERZA Laboratory, University of El Oued, El Oued, 39000, Algeria; Department of Mechanical Engineering, University of El Oued, El Oued, 39000, Algeria; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; College of Technical Engineering, Al-Farahidi University, Baghdad, 10001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Energy Engineering Department, College of Engineering, University of Baghdad, Baghdad, 10071, Iraq; Mechanical Engineering Department, College of Engineering, Gulf University, Sanad, 26489, Bahrain; Institute of Laser and Systems Technologies (iLAS), Hamburg University of Technology (TUHH), Harburger Schloßstraße 28, Hamburg, 21079, Germany; Dynamics of Engines and Vibroacoustic Laboratory, F.S.I., M’Hamed Bougara University of Boumerdes, Boumerdes, 35000, Algeria
In this article, the model of a 5 kW small wind turbine blade is developed and improved. Emphasis has been placed on improving the blade’s efficiency and aerodynamics and selecting the most optimal material for the wind blade. The QBlade software was used to enhance the chord and twist. Also, a new finite element model was developed using the ANSYS software to analyze the structure and modal problems of the wind blade. The results presented the wind blade’s von Mises stresses and deformations using three different materials (Carbon/epoxy, E-Glass/epoxy, and braided composite). The modal analysis results presented the natural frequencies and mode shapes for each material. It was found, based on the results, that the maximum deflections of E-glass, braided composite and carbon fiber were 46.46 mm, 33.54 mm, and 18.29 mm, respectively. © 2023 by the authors.
الكلمات المفتاحية: aerodynamic composite material FE method modal analysis QBlade software wind turbine
Wang Y.; Nasajpour-Esfahani N.; Alizadeh A.; Smaisim G.F.; Abed A.M.; Hadrawi S.K.; Hashemi A.; Hekmatifar M.
Case Studies in Thermal Engineering , Vol. 41
22 استشهاد Article Open Access English ISSN: 2214157X
College of Energy Engineering, Huanghuai University, Henan Province, Zhumadian, 463000, China; Department of Material Science and Engineering, Georgia Institute of Technology, Atlanta, 30332, United States; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit NAMRU, Faculty of Engineering, University of Kufa, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; Department of Mechanical Engineering, Kashan University, Kashan, Iran; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
Numerous theoretical and experimental studies were conducted on thermal energy storage utilizing phase change materials (PCMs). This study employs paraffin with particular properties as the PCM in a square solar water heater. Paraffin's melting point (MP) is 55 °C, the flow is transient, and natural convection is responsible for the heat transfer (HT). In this study, the effect of fin geometry, such as height (H) (3, 4, and 5 cm), and the number of fins (NoF) (double and triple), on the performance of the heat exchanger (HE) was investigated. For various parameters, temperature (T) and liquid fraction contours were produced. The results show that, the melting time (MT) for case A (without fins) about 3860 s. Based on the calculations, the reduction of MT for case B (with 3 fins) is 71%. The MT reduction at H=3, 4, and 5 cm equal to 48, 61, and 74% respectively. © 2022 The Authors.
الكلمات المفتاحية: Fin Finite volume method Heat transfer Phase change material Solar water heater
Huang J.; Abed A.M.; Eldin S.M.; Aryanfar Y.; García Alcaraz J.L.
Geothermal Energy , Vol. 11 (1)
22 استشهاد Article Open Access English ISSN: 21959706
Xijing University, Shaanxi, Xi’an, 710123, China; Air Conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Faculty of Engineering, Center of Research, Future University in Egypt, New Cairo, 11835, Egypt; Department of Electric Engineering and Computation, Autonomous University of Ciudad Juárez, Av. Del Charro 450 Norte, Col. Partido Romero, Chihuahua, Juárez, Mexico; Department of Industrial Engineering and Manufacturing, Autonomous University of Ciudad Juárez, Av. Del Charro 450 Norte, Col. Partido Romero, Chihuahua, Juárez, Mexico
Compared with conventional fossil fuel sources, geothermal energy has several advantages. The produced geothermal energy is safe for the environment and suitable for meeting heating power needs. Because the hot water used in the geothermal process can be recycled and used to generate more steam, this energy is sustainable. Furthermore, the climate change does not affect geothermal power installations. This study suggests a combined power generation cycle replicating using the EES software that combines a single flash cycle with a trans-critical carbon dioxide cycle. The findings demonstrate that, in comparison to the BASIC single flash cycle, the design characteristics of the proposed system are greatly improved. The proposed strategy is then improved using the Nelder–Mead simplex method and Genetic Algorithm. The target parameter is exergy efficiency, and the three assumed variable parameters are separator pressure, steam turbine outlet pressure, and carbon dioxide turbine inlet pressure. The system’s exergy efficiency was 32.46% in the default operating mode, rising to 39.21% with the Genetic Algorithm and 36.16% with the Nelder–Mead simplex method. In the final step, the exergy destruction of different system components is calculated and analyzed. Graphical Abstract: [Figure not available: see fulltext.]. © 2023, The Author(s).
الكلمات المفتاحية: Exergy destruction Exergy efficiency Genetic algorithm Geothermal Nelder–Mead simplex method Optimization
Ma K.; Xu L.; Abed A.M.; Elkamchouchi D.H.; Amine Khadimallah M.; Ali H.E.; Algarni H.; Assilzadeh H.
Sustainable Energy Technologies and Assessments , Vol. 56
22 استشهاد Article English ISSN: 22131388
Department of Internet, Jiaxing Vocational&Technical College, Jiaxing, 314036, China; Department of Design and Information, Jiaxing Nanyang Polytechnic Institute, Jiaxing, 314031, China; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Prince Sattam Bin Abdulaziz University, College of Engineering, Civil Engineering Department, Al-Kharj, 16273, Saudi Arabia; Research Center for Advanced Materials Science (RCAMS), King Khalid University, P.O. Box 9004, Abha, 61413, Saudi Arabia; Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, 61413, Saudi Arabia; Physics Department, Faculty of Science, Zagazig University, Zagazig, 44519, Egypt; Department of Biomaterials, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences, Chennai, 600 077, India; Department of Information Technology, College of Computer and Information Sciences, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia
The main energy demand of the globe is provided by fossil fuels, which are nonrenewable and can no longer be utilized once depleted specifically at buildings. Hydrogen as the highest environmentally friendly fuel, is a renewable and clean fuel with a potential to be an energy carrier for the next generation. It also has the capacity to replace the current fossil fuel-based energy infrastructure and refinery products for building energy consumptions. This is seen and projected as a remedy for the aforementioned issues, such as global warming and environmental deterioration. The most significant elements to consider while establishing hydrogen infrastructure are environmental conditions. In this study, by the use of an Artificial Neural Network (ANN) approach in MATLAB, H2 thermal and storage rate were ultimately predicted. The outcome of the spiral-shaped thermal collector with water was superior to that of the other hydrogen generation methods. The findings predicted by ANN approaches demonstrate an outstanding correlation with the experimental outcomes. Consequently, it is recommended that the constructed ANN model might be utilized to estimate the performance of the H2 storage system in future research. © 2023 Elsevier Ltd
الكلمات المفتاحية: Artificial intelligent Cleaner energy Hydrogen Sustainable environment
Lin H.; Lu J.; Abed A.M.; Nag K.; Fayed M.; Deifalla A.; Bin Mahfouz A.S.; Galal A.M.
Chemosphere , Vol. 329
20 استشهاد Article English ISSN: 00456535
Yuxi Normal University, Yunnan Province, ZIP 653100, China; Guangxi Key Lab of Human-machine Interaction and Intelligent Decision, Nanning Normal University, Nanning, 530001, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; College of Engineering and Technology, American University of the Middle East, Kuwait; Full Professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Department of Chemical Engineering, University of Jeddah, Asfan Road, Jeddah, 23890, Saudi Arabia; Department of Mechanical Engineering, College of Engineering in Wadi Alddawasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, Mansoura, P.O 35516, Egypt
This work presented modeling and simulation of CO2 from natural gas. One of the most promising technologies is Pressure Swing Adsorption (PSA), which is an energy-efficient and cost-effective process for separating and capturing CO2 from industrial processes and power plants. This paper provides an overview of the PSA process and its application for CO2 capture, along with a discussion of its advantages, limitations, and future research directions. This process is pressure swing adsorption (PSA) with four adsorption beds. The adsorption bed columns fill with activated carbon as adsorbent. In this simulation momentum, mass and energy balance are solved simultaneously. The process was designed with two beds in adsorption conditions and the other two beds in desorption conditions. The desorption cycle includes blow-down and purge steps. The linear driving force (LDF) estimates the adsorption rate in modeling this process. The extended Langmuir isotherm is used for the equilibrium between solid and gas phases. The temperature changes by heat transfer from the gas phase to solid and axial heat dispersion. The set of partial differential equations is solved using implicit finite difference. © 2023 Elsevier Ltd
الكلمات المفتاحية: Adsorption CO<sub>2</sub> capture PSA-Activated carbon Simulation
Hasan H.A.; Togun H.; Abed A.M.; Mohammed H.I.
International Journal of Thermophysics , Vol. 44 (5)
20 استشهاد Article English ISSN: 0195928X
Ministry of Higher Education & Scientific Research, Department of Studies, Planning & Follow-up, Baghdad, 10011, Iraq; Electromechanical Engineering Department, University of Technology, Baghdad, 10066, Iraq; Department of Biomedical Engineering, College of Engineering, University of Thi-Qar, Thi-Qar, 64001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Hillah, 1001, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq
A solar air heater is an effective way to heat air and has applications in heating rooms, drying crops, vegetables and seasoning timber. This study conducted an experiment to evaluate the impact of different slant angles (30°, 45°, 60°) and mass flow rates (0.040 kg·s−1, 0.045 kg·s−1, 0.052 kg·s−1) of fins on the thermal efficiency of finned plate solar air heaters. A Finned Plate Solar Air Heater (FPSAH) system with an inclined fin array was developed and tested for thermal efficiency. An array of fins with different slant angles was attached to the rear of the absorber plate to improve heat transfer and thermal efficiency. Results showed that the thermal efficiency increased as the slant angle decreased, with the highest thermal efficiency (70 %) and outlet temperature (58.66 °C) achieved at a slant angle of 30° and mass flow rate of 0.052 kg·s−1. The FPSAH system uses inclined fins to increase solar energy absorption and generate high air temperatures at the outlet. It performs better thermally compared to a solar air heater with a flat plate. © 2023, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.
الكلمات المفتاحية: Fins Slant angles Solar air heater solar dryer Thermal efficiency
Nouraei S.; Anvari A.; Abed A.M.; Ali Akbari O.; Montazerifar F.; Baghaei S.; Fatholahi M.
Alexandria Engineering Journal , Vol. 64, pp. 309-334
19 استشهاد Article Open Access English ISSN: 11100168
Department of Mechanical Engineering, Aligudarz Branch, Islamic Azad University, Aligudarz, Iran; Department of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Young Researchers and Elite Club, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Mechanical Engineering, University of Science and Culture, Tehran, Iran; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
This paper presents a numerical simulation of nanofluid flowing in an open cavity under mixed convection by considering various heat transfer zones. To enhance the heat transfer, water was augmented with copper nanoparticles at different ϕ (volume fraction of nanoparticles) values. The present paper aims to determine the optimal position which maximizes the heat transfer in a circular open cavity. Also, in this research the investigation of combined convection flow in a specific geometry, taking into account the changes in the flow parameters, is an attempt to model the temperature field and heat transfer. For this purpose, the nanofluid flow for Reynolds numbers of Re =10, 50 and 100 is investigated. On the other hand, the hot areas in the curved part of the open cavity are separated in various cases. The results show that due to the low velocity of the fluid in the circular part of the cavity, especially in the hot wall area, most of the fluid exchange is due to natural convection due to density difference and the hot areas are strengthen the flow circulation. The exchange is also improved by increasing Re (Reynolds number) or the momentum term, and the distribution of T (temperature) in the cavity becomes more uniform. Hot spots with low heat transfer coefficient were attenuated at higher Re. The most suitable temperature distributions were achieved for W4 and W2. By increasing ϕ, the friction factor decreases for pure water, especially in W2 and W3. However, due to fluid-surface impact at Re = 100 in W2 and W3, the friction factor does not change significantly by altering ϕ. Using a higher Re and the dominance of the fluid momentum in comparison with the viscous force, the effect of nanoparticle concentration decreases. In general, the best heat transfer occurs at higher volume fraction of nanoparticles. Finally, at all Reynolds numbers, the heat transfer increases by 8–19%. This is because nanoparticles are added to pure water (working fluid). © 2022 THE AUTHORS
الكلمات المفتاحية: Mixed convection Nanofluid Numerical study Semi-circular open channel
Alwash S.; Ibrahim S.; Abed A.M.
Energies , Vol. 16 (1)
19 استشهاد Article Open Access English ISSN: 19961073
Department of Electrical Engineering, University of Babylon, Babylon, 51001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
In this paper, the role of soft open point (SOP) is investigated with and without system re-configuration (SR) in reducing overall system power losses and improving voltage profile, as well as the effect of increasing the number of SOPs connected to distribution systems under different scenarios using a proposed hybrid water cycle algorithm (HWCA). The HWCA is formulated to enhance the water cycle algorithm (WCA) search performance based on the genetic algorithm (GA) for a complex nonlinear problem with discrete and continuous variables represented in this paper by SOP installation and SR. The WCA is one of the most effective optimization algorithms, however, it may have difficulty striking a balance between exploration and exploitation due to the nature of the proposed nonlinear optimization problem, which mostly causes slow convergence and poor robustness. Consequently, the HWCA proposed in this paper is an efficient solution to improve the balance between exploration and exploitation, which in turn leads to improving the WCA’s overall performance without the possibility of getting trapped in local minima. Several cases are studied and conducted on an IEEE 33-node and the IEEE 69-node to investigate the real benefit gained from using SOPs alone or simultaneously with the SR. Based on the obtained results, the proposed HWCA succeeds in enhancing the performance of the proposed test systems considerably in terms of loss reduction (e.g., 31.1–63.3% for IEEE 33-node and 55.7–82.1% for IEEE 69-node compared to the base case) and voltage profile when compared to the base case while maintaining acceptable voltage magnitudes in most cases. Furthermore, the superiority of the proposed method based on the HWCA is validated when compared with the GA and WCA separately for both test systems. The obtained results show the outperformance of the proposed HWCA in attaining the best optimal solution with the least number of iterations. © 2022 by the authors.
الكلمات المفتاحية: distribution systems hybrid water cycle algorithm (HWCA) loss reduction soft open point (SOP) system reconfiguration voltage profile
Togun H.; Hamidatou S.; Mohammed H.I.; Abed A.M.; Hasan H.A.; Homod R.Z.; Al-Fatlawi A.W.; Al-Thamir M.; Abdulrazzaq T.
Symmetry , Vol. 15 (3)
19 استشهاد Article Open Access English ISSN: 20738994
Department of Biomedical Engineering, College of Engineering, University of Thi-Qar, Nasiriyah, 64001, Iraq; Energy and Mechanical Engineering Laboratory (LEMI), University of Boumerdes, Boumerdes, 35000, Algeria; Department of Physics, College of Education, University of Garmian, Kalar, 46021, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Ministry of Higher Education & Scientific Research, Department of Studies, Planning & Follow-Up, Baghdad, 10011, Iraq; Electromechanical Engineering Department, University of Technology, Baghdad, 10066, Iraq; Department of Oil and Gas Engineering, Basrah University for Oil and Gas, Basra, 61004, Iraq; Department of Mechanical Engineering, University of Kufa Najaf, Kufa, 54003, Iraq; Scientific Research Center, Al-Ayen University, Nasiriyah, 64001, Iraq; Department of Petroleum & Gas Engineering, College of Engineering, University of Thi-Qar, Nasiriyah, 64001, Iraq
This study aims to investigate the thermal behavior and aerodynamic phenomena in a heated channel with varied rib configurations using computational fluid dynamics (CFD) simulations. Incorporating ribs in such systems enhances heat transfer and increases flow resistance and manufacturing costs. Understanding heat exchanger theory, measurement methods, and numerical calculations are crucial for creating efficient heat exchangers. The current research employs numerical analysis to assess the impact of hybrid ribs on heat transfer enhancement in forward-facing contracting channels (FFS). A two-dimensional forced convection heat transfer simulation under turbulent flow conditions was performed, considering the presence and absence of ribs with dimensions of 1 cm by 1 cm and spaced 11 cm apart. The arrangement of the ribs causes symmetrical temperature and flow distribution after and before each rib. The results demonstrate that the use of hybrid ribs outperforms the use of individual rib configurations in terms of thermal performance. This is due to the distinct flow patterns generated as the fluid passes through each rib. The triangle ribs had a more significant impact on the pressure drop than other rib configurations, while the cross ribs showed a lesser effect. The ribs improve the heat transfer coefficient while increasing the pressure drop, and the values of the Reynolds number were found to be directly proportional to the heat transfer coefficient and the pressure drop. The study concludes with a qualitative and quantitative analysis demonstrating the accuracy and coherence of the obtained computational results. © 2023 by the authors.
الكلمات المفتاحية: CFD simulation forward-facing step ribs channel thermal performance turbulent flow
Fei Z.; Alshuraiaan B.; Abed A.M.; Wae-hayee M.
Separation and Purification Technology , Vol. 309
18 استشهاد Article English ISSN: 13835866
State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China; Department of Mechanical Engineering, Kuwait University, Safat, 13060, Kuwait; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Songkhla, Hatyai, 90110, Thailand
The main goal of this research in the first step is to present a new power generation and cooling system with zero emissions for ships. The presented system is a combination of oxygen separator membrane, Oxy-fuel cycle, lithium bromide-water (LiBr-H2O) double-effect absorption refrigeration cycle, and carbon dioxide (CO2) liquefaction cycle. The fuel of the system is liquefied natural gas (LNG). In the second step, the presented system is evaluated from energy, exergy, exergy-economic and environmental exergy viewpoints. In the third step, multi-objective optimization is used to pinpoint the optimal state of the presented scheme based on economic, performance, and environmental impacts (EI). The results revealed that in the reference state the energetic efficiency is 95% and exergetic efficiency is 38%. The net power per kilogram of produced oxygen and liquefied carbon dioxide is equal to 1194 kW and 47.42 kW, respectively. The levelized cost per exergy unit (LCPEU) of the gross power of the supercritical CO2 (SCO2) cycle turbine, nitrogen turbine, the produced cold water, and total products (cooling and power) are equal to 26.75 $/GJ, 270 $/GJ, and 63.05 $/GJ, respectively. The multi-objective optimization outcomes demonstrated that the exergetic efficiency of the system and the cost per exergy unit (CPEU) of all products can be improved up to 18 % and 13 %, respectively. Moreover, the environmental impact per exergy unit (EIPEU) of all products can be improved by up to 6 %. © 2022 Elsevier B.V.
الكلمات المفتاحية: CO<sub>2</sub> liquefaction cycle Environmental impact Multi-objective optimization Oxy-combustion Oxygen transport membrane
Ye X.; Su Z.; Dahari M.; Su Y.; Alsulami S.H.; Aldhabani M.S.; Abed A.M.; Ali H.E.; Bouzgarrou S.M.
Structures , Vol. 55, pp. 1250-1261
17 استشهاد Article English ISSN: 23520124
Angeles University Foundation, Angeles City, 2009, Philippines; Huai Nan Normal University, AnHui, Huainan, 232038, China; International College, Krirk University, Bangkok, 10220, Thailand; Deparment of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; Faculty of Mathematics and Science, Universitity Pendidikan Sultan Idris, Tanjong Malim, 39500, Malaysia; Department of Mathematics, Faculty of Science, University of Jeddah, Jeddah 21959, P.O. Box: 34, Saudi Arabia; Department of Mathematics, Faculty of Science, University of Tabuk, P.O.Box741, Tabuk, 71491, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia; Civil Engineering Department, College of Engineering, Jazan University, Saudi Arabia; Higher Institute of Applied Sciences and Technologie of Sousse, Sousse University, Tunisia
Knowledge of mechanical properties and hardness is essential for the cost-effective and efficient friction stir welding (FSW) in producing Cu and Al composites. Correct process management requires knowledge of consistent model predictions. Many factors affect the mechanical properties and hardness, which include pin geometry, forward speed, rotational speed, and pin angle. The purpose of this research is to investigate the use of Relevance Vector Machine (RVM), Support Vector Machine (SVM), and Least Square Support Vector Machine (LSSVM) algorithms in hybrid modeling of the mechanical properties and hardness in FSW. Then, the resulting mechanical properties are modeled to three modeling methods: the hybrid LSSVM-RVM, hybrid SVM-RVM, and hybrid SVM-LSSVM. A comparison between the experimental data and the output of these models were made. R2, RMSE, and RMSE/ymax statistical indices was used in this research. The values ​​of R2 for the results of the tensile test and hardness area were obtained as 0.9712 and 0.9126, respectively. The results showed that the hybrid LSSVM-RVM model could efficiently estimate the mechanical and hardness properties. © 2023 Institution of Structural Engineers
الكلمات المفتاحية: Friction stir welding LSSVM Mechanical properties RVM SVM
Farouk N.; Abed A.M.; Singh P.K.; Ali H.E.; Alshuraiaan B.; Giao Nguyen V.; Wae-Hayee M.; Nguyen D.T.; El Bouz M.A.
Case Studies in Thermal Engineering , Vol. 41
17 استشهاد Article Open Access English ISSN: 2214157X
Department of Mechanical Engineering, College of Engineering in Alkharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Mechanical Engineering, College of Engineering in Port Sudan, Red Sea University, Port Sudan, 33311, Sudan; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Institute of Engineering and Technology, GLA University, U.P., Mathura, 281406, India; Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia; Research Center for Advanced Materials Science (RCAMS), King Khalid University, P.O. Box 9004, Abha, 61413, Saudi Arabia; Physics Department, Faculty of Science, Zagazig University, Zagazig, 44519, Egypt; Department of Mechanical Engineering, Kuwait University, Safat, 13060, Kuwait; Institute of Engineering, HUTECH University, Ho Chi Minh City, Viet Nam; Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hatyai, Songkhla, 90110, Thailand; PATET Research Group, Ho Chi Minh City University of Transport, Ho Chi Minh City, Viet Nam; Mechanical Power Engineering Dept., Faculty of Engineering, Mansoura University, El, Mansoura, Egypt
This paper presents a numerical investigation of the operation of a solar air heater (SAH) with cylindrical shape ribs under turbulent pulsating flow based on thermal and frictional considerations. Turbulence and thermal natures of flow physics are modeled by taking the relevant governing equations into the account using RNG k-ϵ turbulence model and transient state Reynolds-Averaged Navier-Stokes (RANS) equations. The pulsating flow is modeled with four different wave shapes including rectangular, sinusoidal, triangular, and sawtooth functions. The influence of various factors such as wave shape, Reynolds number (Re), frequency, and amplitude of pulsating flow on the thermal and hydraulic performance of SAH has been evaluated. Results indicated that the SAH with ribbed absorber section under pulsed flow has a larger Nu number compared to the air heater with smooth duct under steady flow. Moreover, the pulsating flow with a sawtooth velocity profile leads to the greatest value of the thermo-hydraulic performance parameter (THPP). The growth of pulsation frequency up to 200 enhances the heat transfer coefficient of the air heater while for frequencies larger than 200, the thermal performance declines. In addition, the increase in pulsation amplitude has a negative effect on the THPP. It was proved that the increment of the Re number enhances the THPP. Up to 53.3% improvement of THPP can be achieved by applying pulsed flow with sawtooth wave shape and ribbed absorber section compared to air heat with smooth duct under steady flow. © 2022 The Authors.
الكلمات المفتاحية: Artificial roughness RNG <sub>k-ϵ</sub>turbulence Model Thermo-hydraulic performance parameter (THPP) Turbulent pulsating flow
Shi L.; Abed A.M.; Fayed M.; Abdulghani Z.R.; Anqi A.E.; Khadimallah M.A.; Moria H.; Wae-Hayee M.
Case Studies in Thermal Engineering , Vol. 41
17 استشهاد Article Open Access English ISSN: 2214157X
Business School, Lishui University, Zhejiang, Lishui, 323000, China; Philippine Christian University, Manila, 0900, Philippines; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; College of Engineering and Technology, American University of the Middle East, Kuwait; Department of Mechanical Engineering Technology, Yanbu Industrial College, Yanbu Al-Sinaiyah City, 41912, Saudi Arabia; Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hatyai, Songkhla, 90110, Thailand
Generally speaking, a Peltier module obtains a high value of COP only for a small range of applied DC voltage. Indeed, increment of DC voltage sharply reduces its COP. Hence, to get a high total COP for a large-scale commercial Peltier air cooler (for example input power of 1000 W) each individual Peltier module should work with a small input DC voltage. This means, a greater number of Peltier modules should be employed in a real cooler to reduce the allocate DC voltage for any individual Peltier module. However, this means higher capital, maintenance, operating and maybe final cooling cost. Hence, a size related cost economic analysis is required for cooling process using Peltier module which is experimentally presented in this research. Three Peltier air coolers with different sizes (but in the same range of total input power) are investigated from efficiency and economic cost viewpoints. Findings show that despite the higher capital and maintenance cost for case "c"(6 TEM), it still provides cheaper cooling compared to the other cases. However, it is noted that case "b"(4 modules) provides 100% lower cooling cost compared to the case "a"(2 modules) while case "c"(6 modules) provides only 35% lower cooling cost compared to the case "b". This means, although increasing module number enhances the total COP of the cooler (for a given input power) and reduces the cooling cost, further increment of module number will finally augment the cooling cost of the cooler. Hence, an optimized number of modules can be selected for a large-scale cooling by simultaneous multi economic and cooling optimization. The quantitative and qualitative findings of this research can be useful for future marketing, and commercialization purposes of large-scale air-cooling process using Peltier module. © 2022 The Authors.
الكلمات المفتاحية: Air cooler Cooler Cost economic Experimental Peltier SPECO Thermoelectric
Smaisim G.F.; Abed A.M.; Shamel A.
Clean Energy , Vol. 7 (3), pp. 571-581
17 استشهاد Article Open Access English ISSN: 25154230
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Kufa, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Kufa, 54001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Chemistry, Ardebil Branch, Islamic Azad University, Ardebil, Iran
To use energy systems based on renewable sources, it is very important to consider backup and hybrid sources because renewable energies are not available all the time; therefore, in this system, a geothermal pump is used to preheat the fluid, then the heated fluid is sent to the vacuum tube collector to reach a higher temperature by absorbing solar-thermal energy, and after absorbing solar energy, it goes to the evaporator to produce superheated steam and finally the superheated fluid moves to the steam turbine to produce energy. After the simulation, thermodynamic analysis along with economic analysis has been done. In the base state, the energy efficiency and exergy of cogeneration were 0.566 and 0.156, respectively; the energy efficiency and electrical exergy were better than 0.057 and 0.065; and the overall output and immutable work values were 50 and 671.1 kW, respectively. © 2023 The Author(s). Published by Oxford University Press on behalf of National Institute of Clean-and-Low-Carbon Energy.
الكلمات المفتاحية: CHP cycle exergoeconomic analysis organic Rankine cycle sustainable development vacuum tube collector
Chen Y.; Abed A.M.; Faisal Raheem A.-B.; Altamimi A.S.; Yasin Y.; Abdi Sheekhoo W.; Fadhil Smaisim G.; Ali Ghabra A.; Ahmed Naseer N.
Journal of Molecular Liquids , Vol. 371
16 استشهاد Review English ISSN: 01677322
Chongqing academy of governance, Jiulongpo district, Chongqing, 400039, China; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq; University of Ahl Al Bayt, Karbala, Iraq; Department of Pharmaceutical Chemistry, College of Pharmacy, Prince Sattam Bin Abdulaziz University, PO Box 173, Alkharj, Saudi Arabia; College of Medical Technology, Al-Farahidi University, Iraq; Department of Optical Techniques, AlNoor University College, Bartella, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Al-Amarah University College, Al-Amarah, Iraq; Mazaya University College, Iraq
Development of novel, efficient and cost-effective strategies to diminish the permanent emission of greenhouse gases (GHGs) to the atmosphere has been an indisputable concern for scientists. CO2 is known as the most prominent GHG, which its abnormal amount in the atmosphere accelerates the occurrence of unfavorable environmental events such as acid rain, ocean acidification, global warming, and soil degradation. Nowadays, application of various nanofluids for increasing separation efficiency of CO2 has been an attractive subject due to their certain privileges such as chemical compatibility and great specific area. This paper tries to provide an up-to-date overview of the commonly-employed nanofluids accompanying with their properties and applications to enhance the separation efficiency of CO2. Moreover, important mechanisms toward improving the mass transfer rate and the separation proficiency of CO2 through the nanofluids are comprehensively discussed and summarized. Single material nanofluids (SMNFs) and hybrid nanofluids (HNFs) are considered as major categorizations of commonly-employed nanofluids in the scientific scope of membrane-based gas separation process (MGSP), which are aimed to be discussed in this paper. True recognition of nanofluids application in the CO2 separation process leads to finding its advantages/disadvantages in comparison with other conventional procedures. © 2022 Elsevier B.V.
الكلمات المفتاحية: CO<sub>2</sub> separation Enhancement mechanisms Greenhouse gases emission Nanofluids
Smaisim G.F.; Abed A.M.; Hadrawi S.K.; Majdi H.S.; Shamel A.
Clean Energy , Vol. 7 (4), pp. 735-746
16 استشهاد Article Open Access English ISSN: 25154230
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, 54001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Chemistry, Ardebil Branch, Islamic Azad University, Ardebil, Iran
Due to the short distance between the sources of production and consumption, microgrids (MGs) have received considerable attention because these systems involve fewer losses and waste less energy. And another advantage of MGs is that renewable energy sources can be widely used because these resources are not fully available and can provide a part of the required power. The purpose of this research is to model the MG considering the production sources of microturbines, gas turbines and internal combustion engines. Renewable energies such as wind turbines (WTs) and photovoltaic (PV) cells have been used to provide part of the required power and, because of the lack of access to renewable energy sources at all times, energy reserves such as batteries and fuel cells (FCs) have been considered. The power of the microturbine, gas turbine, internal combustion engine, FC and battery in this system is 162, 150, 90, 100 and 225 kW, respectively. After modelling the studied system, optimization was done using the imperialist competitive algorithm to minimize production costs and provide maximum thermal and electrical loads. The maximum production power for PVs is equal to 0.6860 MWh and at this time this value for WTs is equal to 0.3812 MWh, in which case the excess electricity produced will be sold to the grid. © 2023 The Author(s). Published by Oxford University Press on behalf of National Institute of Clean-and-Low-Carbon Energy.
الكلمات المفتاحية: combined heat and power energy management system microgrid optimal power flow optimization sustainable development
Zhao S.; Abed A.M.; Deifalla A.; Al-Zahrani A.; Aryanfar Y.; García Alcaraz J.L.; Galal A.M.; Sai W.
Case Studies in Thermal Engineering , Vol. 45
15 استشهاد Article Open Access English ISSN: 2214157X
School of Mechanical Engineering, Xijing University, Shaanxi, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Full Professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Department of Mechanical and Materials Engineering, Faculty of Engineering, University of Jeddah, Jeddah, 21589, Saudi Arabia; Department of Electric Engineering and Computation, Autonomous University of Ciudad Juárez, Av. Del Charro 450 Norte. Col, Partido Romero, Juárez, Chihuahua, Mexico; Department of Industrial Engineering and Manufacturing, Autonomous University of Ciudad Juárez, Av. Del Charro 450 Norte. Col, Partido Romero, Juárez, Chihuahua, Mexico; Department of Mechanical Engineering, College of Engineering in Wadi Alddawasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, P.O 35516, Mansoura, Egypt; School of Computer Science, Xijing University, Shaanxi, Xi'an, 710123, China
Exergoenvironmental analysis is used to assess system performance from an environmental point of view. The analyses' guiding principles are formed based on evaluations of the thermodynamic and ambient conditions. The ground source heat pump is one of the most suitable technologies for renewable energy due to its high-performance factor and low-temperature heat energy. In this research, EES software simulated a heat pump with an intermediate economizer and the ground source energy drive. Then the effect of changing different parameters, including the pressure of different parts of the cycle, degree of superheating at the evaporator outlet and degree of subcooling at the condenser outlet, on the environmental parameters (exergoenvironment factor, Exergy stability factor, Environmental damage effectiveness factor, and Exergoenvironmental impact improvement factor), is checked for five working fluids including R134a, R12, R152a, R1234yf and R1234ze(E). © 2023 The Authors
الكلمات المفتاحية: Competitive analysis Economizer Exergoenvironmental analysis Geothermal heat pump Working fluids
Najm A.S.; Al-Ghamdi A.; Amin M.T.; Al Ghamdi A.; Moria H.; Holi A.M.; Abed A.M.; AL-Zahrani A.A.; Sopian K.; Bais B.; Sultan A.J.
Scientific Reports , Vol. 13 (1)
15 استشهاد Article Open Access English ISSN: 20452322
Department of Electrical, Electronics and System, FKAB, Universiti Kebangsaan Malaysia (UKM), Selangor, Bangi, 43600, Malaysia; Petroleum Research and Development Center, Ministry of Oil, Baghdad, Iraq; Department of Chemical Engineering, University of Technology, Baghdad, Iraq; Department of Chemistry, College of Science, Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Dammam, 31441, Saudi Arabia; Basic & Applied Scientific Research Center (BASRC), Renewable and Sustainable Energy Unit, Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Dammam, 31441, Saudi Arabia; Department of Mechanical Engineering Technology, Yanbu Industrial College, Yanbu Al-Sinaiyah City, 41912, Saudi Arabia; Department of Chemical Engineering Technology, Yanbu Industrial College, Yanbu Al-Sinaiyah City, 41912, Saudi Arabia; Department of Physics, College of Education, University of Al-Qadisiyah, Al-Qadisiyah, Al-Diwaniyah, 58002, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University, Babylon, Iraq; Imam Abdulrahman-Bin Fiasal University, Eastern Region, Dammam, Saudi Arabia; Department of Mechanical Engineering, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, Malaysia
This study aims to enhance the CZTS device's overall efficiency, the key research area has been identified in this study is to explore the effects of a novel, low-cost, and simplified, deposition method to improve the optoelectronic properties of the buffer layer in the fabrication of CZTS thin film solar cells. Herein, an effective way of addressing this challenge is through adjusting the absorbers' structure by the concept of doping, sensitized CdS thin film by the bi-functional linker, and an environmentally friendly catalytic green agent. The Linker Assisted and Chemical Bath Deposition (LA-CBD) method was introduced as an innovative and effective hybrid sensitization approach. In the one-step synthesis process, Salvia dye, Ag, and 3-Mercaptopropionic acid (MPA) were used. Generally, the results for all samples displayed varying bandgap as achieved between (2.21–2.46) eV, hexagonal structure with considerably decreased strain level, broader grain size, and dramatically enhanced crystalline property. Hence, the rudimentary CdS/CZTS solar cell devices were fabricated for the application of these novel CdS films. Preliminary CZTS thin film solar cell fabrication results in the highest conversion efficiency of 0.266% obtained CdS + Salvia dye, indicating the potential use of the CdS films as a buffer layer for CZTS photovoltaic devices. © 2023, Springer Nature Limited.
Cheng H.; Abed A.M.; Alizadeh A.; Ali Ghabra A.; M. A. Altalbawy F.; Sabetvand R.; Fadhil Smaisim G.; Yadav A.; Toghraie D.; Riadi Y.
Journal of Molecular Liquids , Vol. 369
14 استشهاد Article English ISSN: 01677322
Research Institute of Tsinghua University in Shenzhen, Shenzhen 518000, China; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq; Al-Amarah University College, Al-Amarah, Iraq; Department of Chemistry, University College of Duba, University of Tabuk, Duba, 71911, Saudi Arabia; National Institute of Laser Enhanced Sciences (NILES), University of Cairo, Giza, 12613, Egypt; Department of Energy Engineering and Physics, Faculty of Condensed Matter Physics, Amirkabir University of Technology, Tehran, Iran; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Department of CEA, GLA University, Mathura, 281406, India; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr Khomeinishahr, Iran; Department of Pharmaceutical Chemistry, College of Pharmacy, Prince Sattam bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia
Heat transfer (HT) has always been one of the major challenges in engineering. Many approaches have been offered to enhance or control HT. One of the common techniques to develop the thermal performance of devices is to use nano-sized channels. This study is aimed to examine the influence of temperature and external force (EF) on nanochannel simulated samples by molecular dynamics simulation (MDS). The present study examined the effect of initial temperature (300–400 K) and EF (with 0.001–0.01 eV/Å) on oil inside the nanochannel. The results show that increasing temperatures up to 350 K increases the heat flux (HF) and thermal conductivity (TC) increase and decreases due to the increased number and intensity of atomic collisions in the structures. The HF and TC at 350 K are 946 W/m2 and 0.66 W/m.K. Also, by changing the EF from 0.001 to 0.01 eV/Å, the HF increases from 911 to 942 W/m2 and the TC by 0.52 to 0.63 W/m.K. So, with an increment in EF, oscillation amplitude increases, and thermal performance improves. Since the thermal performance of refrigerant is noticeable in various industrial applications, it's hopeful this study proposed an optimal mechanism in practical samples. © 2022 Elsevier B.V.
الكلمات المفتاحية: Heat flux Heat transfer Nanochannel Nanofluid (NF) Thermal conductivity
Zhang Y.X.; Alizadeh A.; Abed A.M.; Nasajpour-Esfahani N.; Smaisim G.F.; Hadrawi S.K.; Zekri H.; Baghaei S.; Esmaeili S.; Wang M.X.
Journal of Energy Storage , Vol. 62
13 استشهاد Article English ISSN: 2352152X
Nanchang Institute of Technology, 330000, China; Hainan Vocational University of Science and Technology, 571126, China; Shenzhen High-level Talents Development Promotion Association, 518000, China; CDA International Accelerator, 999038, Poland; Jiangxi Engineers Association, 330046, China; University of Cyprus, 999058, Cyprus; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Georgia Institute of Technology, Department of Material Science and Engineering, 771 Ferst Dr NW, Atlanta, 30332, GA, United States; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; College of Engineering, The American University of Kurdistan, Kurdistan Region, Duhok, Iraq; Department of Mechanical Engineering, College of Engineering, University of Zakho, Kurdistan Region, Zakho, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; University of Wollongong, 999029, Australia; Department of Physics, Semnan University, Semnan, Iran
Phase change material (PCM) is a material that has a specific melting point, and its latent heat of melting is large enough that it can be used to store thermal energy. This study investigated the effect of size (4–8 Å), and the number of layers (3–10 layers) of iron nanoparticles (NPs) channel on thermal behavior (TB) and phase change (PC) process of sodium sulfate/calcium chloride hexahydrate (Na2SO4/MgCl2·6H2O) PCM molecular dynamics (MD) simulation. By increasing the number of layers from 3 to 5, the maximum temperature and heat flux (HF) increased from 406 and 1471 W/m2 to 451.51 K and 1496 W/m2. By increasing the number of layers from 3 to 7 layers, the charging time (CT) and discharge time (DT) of atomic samples decreased from 4.01 ns and 4.25 ns to 3.88 ns and 4.17 ns. By adding the iron NPs with a radius of 4, 5, 6, and 8 Å, the maximum temperature increased to 420, 429, 458, and 503 K, respectively. By adding the iron NPs with different radii from 4 to 8 Å, the HF increased from 1566 W/m2 to 1657 W/m2. By adding the iron NPs into the Na2SO4/MgCl2·6H2O, the received HF increased, and the maximum temperature increased. By adding the iron NPs with different radii, the CT decreased from 3.95 ns to 3.73 ns. The DT increased from 4.33 ns to 4.36 ns by increasing the radius from 4 to 8 Å. According to the TB of this PCM, it should be used in refrigerants instead of toxic and dangerous refrigerants, such as ammonia and chlorofluorocarbon. Moreover, they were used for construction purposes for double-glazed windows. © 2023
الكلمات المفتاحية: Charge time Discharge time Heat flux Molecular dynamics simulation Phase change material (PCM) Thermal behavior
Zhan M.; Mansir I.B.; Singh P.K.; Rajab H.; Abed A.M.; Dahari M.; Nasr S.; Khan I.; Eldin S.M.; Sui D.
Case Studies in Thermal Engineering , Vol. 43
13 استشهاد Article Open Access English ISSN: 2214157X
College of Mechatronic Engineering, Guangdong University of Petrochemical Technology, Maoming, China; Department of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Centre for Energy Research and Training, Ahmadu Bello University, P.M.B, Zaria, 1045, Nigeria; Department of Mechanical Engineering, Institute of Engineering and Technology, Gla University, U.P., Mathura, 281406, India; College of Engineering, Mechanical Engineering Department, Alasala University, P.O.Box: 12666 Amanah, King Fahad Bin Abdulaziz Rd., Dammam, 31483, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Deparment of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; Chemistry Department, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, 61413, Saudi Arabia; Department of Mathematics, College of Science Al-Zulfi, Majmaah University, Al-Majmaah, 11952, Saudi Arabia; Center of Research, Faculty of Engineering, Future University in Egypt New Cairo, 11835, Egypt
Bi-evaporator technology is a robust tool, operating in two levels of coolant production for normal cooling and freezing purposes. The current study is motivated to assess the feasibility of integrating a bi-evaporator technology and a single-flash geothermal power plant. The main novelty of this paper is to design a novel combined cooling and power (CCP) production cycle relying on an organic Rankin cycle and a modified bi-evaporator refrigeration cycle. In addition, the use of a zeotropic mixture (Pentane/Isobutane) fed to the CCP is another difference between the current research and the available literature review. In addition to the power and cooling, the entire system is boosted by the use of a multi-generation process, producing heating via a heating production unit and hydrogen (H2) via a low-temperature electrolyzer. The proposed system was analyzed from the energy, exergy, specific exergy costing, and net present value points of view. Therefore, a coherent single- and dual-sensitivity study is done, and the variability of the main performance metrics is viewed against the decision parameters. In addition, owing to the incompatible trend of the newly devised plant's chief performance metrics, an advanced triple-objective optimization through a NSGA-II method is regraded from the standpoints of thermodynamics and economics. The objective functions include the coefficient of performance, exergy efficiency, and sum unit cost of products, and the optimum solution reveals their values of 33.56%, 63.2%, and 6.0 $/GJ, respectively. © 2023 The Authors.
الكلمات المفتاحية: Bi-evaporator Dual-sensitivity parametric study Geothermal energy Triple-objective optimization Zeotropic mixture
Sui Y.; Abdulkreem AL-Huqail A.; Suhatril M.; Abed A.M.; Zhao Y.; Assilzadeh H.; Amine Khadimallah M.; Elhosiny Ali H.
Fuel , Vol. 331
13 استشهاد Article English ISSN: 00162361
School of Nuclear Science and Technology, University of South China, Hengyang, 421001, China; Department of Biology, College of Science, Princess Nourah Bint Abdulrahman University, P.O.Box 84428, Riyadh, 11671, Saudi Arabia; Department of Civil Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Guangzhou Construction Co., Ltd., Guangzhou, 510030, China; Guangzhou Testing Centre of Construction Quality & Safety Co., Ltd., Guangzhou, 510440, China; Guangzhou Institute of Building Science Group Co., Ltd., Guangzhou, 510440, China; Department of Biomaterials, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences, Chennai, 600 077, India; Prince Sattam Bin Abdulaziz University, College of Engineering, Civil Engineering Department, Al-Kharj, 16273, Saudi Arabia; Laboratory of Systems and Applied Mechanics, Polytechnic School of Tunisia, University of Carthage, Tunis, Tunisia; Advanced Functional Materials & Optoelectronic Laboratory (AFMOL), Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha 61413, Saudi Arabia; Research Center for Advanced Materials Science (RCAMS), King Khalid University, P.O. Box 9004, Abha 61413, Saudi Arabia; Physics Department, Faculty of Science, Zagazig University, Zagazig, 44519, Egypt
Billions liters of wastewater are created every day from industrial and domestic locations, and while wastewater is frequently regarded as a concern, it includes the potential to be regarded as a rich supply of energy and materials. The creation of hydrogen gas by electrolysis utilizing a solar system is an alternate method for treating this residual water. Wastewater has four to five times the energy necessary to its treatment and a good source of bio-hydrogen as a feedstock chemical, clean energy vector, and a fuel generally acknowledged to play a part in the energy system's decarburization. The goal of this research was to see how well wastewater might be used to produce anaerobic hydrogen. Synthetic wastewater with high- and ordinary strength organic loadings as real-time residential wastewater with(out) a combination of food waste was examined. Hydrogen generation during sewage sludge and mining residue suspensions coupled was measured using electro dialytic methods at 50 and 100 mA. Hydrogen purity has been reached at 33 % along the electro dialytic treat of sewage sludge. Hydrogen purity reached 71 percent and 34 percent, respectively, while adding sewage sludge or effluent as enhancers in waste solutions. The maximum extraction ratios of phosphorus (71 %) and tungsten (62 %), respectively, were obtained while the technique has been performed to waste suspensions mixed with sewage sludge. This study's findings could be used to develop onsite household energy and wastewater recovery systems. © 2022 Elsevier Ltd
الكلمات المفتاحية: Electrolysis Energy Geotechnical engineering Hydrogen Mining waste waters
Muftah A.F.; Sopian K.; Ibrahim A.; Elbreki A.; Abed A.M.
Energy Sources, Part A: Recovery, Utilization and Environmental Effects , Vol. 45 (3), pp. 6756-6771
13 استشهاد Article English ISSN: 15567036
Department of Mechanical Engineering, College of Mechanical Engineering Technology, Benghazi, Libya; Solar Energy Research Institute, Universiti Kebangsaan Malaysia, Selangor, Bangi, Malaysia; Authority of Natural Science Research and Technology, Libyan Authority for Scientific Research, Tripoli, Libya; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
Distillation represents one of the earliest methods of treating water, and it remains as such in many parts of the world. A basin-type stepped solar-still remains the simplest desalination technology. It is simple, easy to construct, requires minimal maintenance, and is cost-effective. The objectives of this study were to design, fabricate and evaluate the performance of a modified stepped solar-still. The theoretical analysis was conducted to determine the optimum design of the still. The productivity and solar-still efficiency were obtained by solving the energy balance equations for the absorber plate, saline water, and glass cover, the temperature difference between saline water and the glass cover, and evaporation, convective, and radiative heat transfer coefficients under the climate of Malaysia. The experimental setup was constructed, and experiments were conducted at the Universiti Kebangsaan Malaysia (UKM), Selangor (Latitude 2°56‘22“North and Longitude 101°47’16” East). The basin area of the stepped solar-still was 1.m2 (0.5 m × 2.0 m). The basin of the still was constructed from a black-painted galvanized steel sheet to increase the absorptivity. The cover of the still was made up of glass. The absorber plate of the stepped still consisted of 5 steps (0.1 m × 2 m). The stepped solar-still has been modified to include external and internal reflectors, fins, and an external condenser. The performance of the modified stepped solar-still design has been investigated and compared with the unmodified stepped solar-still. The theoretical results show a significant improvement in the performance of the modified stepped solar-still. The productivity was higher than that for stepped solar-still before modification by approximately 29% under the same climate conditions. The experimental results have shown that the maximum temperature of saline water and glass cover were 62.1°C and 56.2°C, respectively. The maximum distillate water in the still was 6.10 kg/m2. The daily efficiency of the modified stepped solar-still was approximately 52.3%. Based on the experimental and theoretical results, the proposed design significantly enhanced the stepped solar-still thermal performance. A statistical t-test was conducted to establish the significance of the difference in the stepped solar-still experimental. It was found that there was a significant improvement in the stepped solar-still performance after modification. The techno-economic analysis showed that the product cost would be around USD0.07 per liter of distillate. © 2023 Taylor & Francis Group, LLC.
الكلمات المفتاحية: enhanced productivity Solar desalination solar energy stepped solar-still techno-economic analysis
Yan G.; Zhou X.; Abed A.M.; Alsenani T.R.; Elattar S.; Peng F.; Abdelmohimen M.A.H.
Applied Thermal Engineering , Vol. 223
12 استشهاد Article English ISSN: 13594311
School of Intelligent Manufacture, Chongqing Creation Vocational College, Chongqing, 402160, China; School of Intelligent Construction, Luzhou Vocational and Technical College, Sichuan, Luzhou, 646000, China; Luzhou Key Laboratory of Intelligent Construction and Low-carbon Technology, Sichuan, Luzhou, 646000, China; Air Conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Electrical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Industrial & Systems Engineering, College of Engineering, Princess Nourah bint Abdulrahman University, P.O.Box 84428, Riyadh, 11671, Saudi Arabia; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam; Mechanical Engineering Department, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Shoubra Faculty of Engineering, Benha University, Cairo, 11629, Egypt
Parabolic trough collector (PTC) is a type of solar system that generates thermal energy by concentrating solar radiation on the surface of a circular receiver tube. However, the overall output of this solar system can be significantly enhanced by the integration of this system with Photovoltaic (PV) modules which is proposed and comprehensively investigated in this research using 3D validated numerical simulation. In the first step of this study, all operating parameters of the new PTC/PV system (i.e. thickness of the air gap, the glass cover thickness, copper nanoparticles mass fraction, and PV cell efficiency) are optimized by employing the Taguchi method. Afterward, it is attempted to enhance further the efficiency of the optimized PTC/PV system by rotating the receiver tube of the system and also installing metal foam inside the fluid channel of the receiver tube. According to the Taguchi method, the maximum overall performance of the PTC/PV system is 71.1%, when the glass cover thickness, air gap thickness, PV cell efficiency, and nanoparticles mass fraction are 2 mm, 10 mm, 21%, and 6%, respectively. Additionally, the numerical simulations show that rotating the receiver tube of the optimized PTC/PV system can augment the overall efficiency of the system from 71.1% to 82.5%, which is due to the improvement in heat transfer rate from the tube to the operating fluid. However, by rotating the receiver tube, the electrical efficiency of the PV cells reduces from 16.0% to 14.9%. Additionally, installing metal foam inside the receiver tube can boost the electrical and overall efficiency of the fixed PTC/PV system by approximately 2% and 13.9%, respectively. It is worth mentioning that adding foam to the rotating receiver tube declines the thermal efficiency of the system by around 0.5%. © 2023 Elsevier Ltd
الكلمات المفتاحية: Electrical Energy Parabolic trough collector (PTC) Photovoltaic (PV) module Thermal
Narayanasamy M.P.; Smaisim G.F.; Abed A.M.; Joseph Leon S.L.; Subramani K.
Iranian Journal of Science and Technology - Transactions of Mechanical Engineering , Vol. 47 (4), pp. 1503-1513
12 استشهاد Article English ISSN: 22286187
Mechanical Engineering, Mahaguru Institute of Technology, Alappuzha, India; Faculty of Engineering, Mechanical Engineering, University of Kufa, Kufa, Iraq; Faculty of Engineering, Nanotechnology and Advanced Materials Research Unit (NAMRU), University of Kufa, Kufa, Iraq; Air-Conditioning and Refrigeration Techniques Engineering, Al-Mustaqbal University College, Hillah, Iraq; Engineering Department, University of Technology and Applied Sciences, Ibri, Oman; Mechanical Engineering, JSS Academy of Technical Education, Bengaluru, India
Heat transfer is a key phenomenon for the safe and satisfactory operation of any thermal system. Fins are occupying a greater role in heat transfer applications where the radiation fins are utilized in space applications that are essential for satellite thermal control systems. The present work has designed rectangular, stepped, and elliptical pin-fin profiles for space vehicle thermal control systems. So, the investigation is considered a vacuum chamber, which suits the space ambiance and shows the heat transfer enhancement in different fin profiles. To validate the experimental work, a computational model has been developed and analyzed for the same boundary conditions. The temperature distribution and the amount of heat transfer determine the performance of different pin-fin profiles. In comparison with flat fins, elliptical fins increase heat transfer by an average of 20%. For the applied heat source, the thermal characteristics of three profiles were studied and presented. Here, the finite volume method is used to simulate the temperature profile due to its lower temperature gradient. The temperature distribution and velocity profile over the fins have been considered for numerical study. The experimental and numerical results have been calculated to determine their accuracy and suitability for space application. © 2023, The Author(s), under exclusive licence to Shiraz University.
الكلمات المفتاحية: CFD Heat transfer Pin-fins Vacuum chamber Validation
Bai Y.; Lin H.; M. Abed A.; Deifalla A.; R Alsenani T.; Elattar S.
Chemosphere , Vol. 327
12 استشهاد Article English ISSN: 00456535
Xi'an Jiaotong University, No.28, Xianning West Road, Shaanxi, Xi'an, 710049, China; Yuxi Normal University, Yunnan, Yuxi, 653100, China; Air Conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Department of Electrical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Industrial & Systems Engineering, College of Engineering, Princess Nourah bint Abdulrahman University, P.O.Box 84428, Riyadh, 11671, Saudi Arabia
In this work, a novel biomass gasifier combined energy system was offered for potable water, heating load, and power generation. The system included a gasifier, an S–CO2 cycle, a combustor, a domestic water heater, and thermal desalination unit. The plant was evaluated from various aspects, i.e., energetic, energetic, exergo-economic, sustainability, and environmental. To this aim, modeling of the suggested system was conducted by EES software; then, a parametric inquiry was carried out to detect the critical performance parameters, considering an environmental impact indicator. The results showed that the freshwater rate, Levelized CO2 emissions, total cost, and sustainability index of 21.19 kg s−1, 0.563 t.MWh−1, 13.13 $.GJ−1, and 1.53 were acquired, each. Moreover, the combustion chamber is a major fount in the irreversibility of the system. Besides, the energetic and exergetic efficiencies were computed at 89.51% and 40.87%. Overall, the offered water and energy-based waste system showed great functionality in terms of thermodynamic, economic, sustainability, and environmental standpoints by enhancing the gasifier temperature. © 2023
الكلمات المفتاحية: Biomass gasification Combined energy systems Desalination Parametric study Sustainable environment
Shao Z.; Li Y.; Huang P.; Abed A.M.; Ali E.; Elkamchouchi D.H.; Abbas M.; Zhang G.
Fuel , Vol. 352
12 استشهاد Article English ISSN: 00162361
Wenzhou Polytechnic, Wenzhou, 325035, China; Zhejiang College of Security Technology, Wenzhou, 325000, China; Wenzhou Deyuan Electric Co., Ltd., Wenzhou, 325000, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Information Technology, College of Computer and Information Sciences, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia; Electrical Engineering Department, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; Department of Digital Media Technology, Hangzhou Dianzi University, Hangzhou, 310018, China; Ocean University of China, College of Engineering, Qingdao, 266100, China; The Key Laboratory of Computer Vision and Systems (Ministry of Education), Tianjin University of Technology, Tianjin, 300384, China
The electrical lighting technique is one of the primary culprits behind a library's high energy usage and operating expenses. Unfortunately, lighting systems are often unregulated, resulting in suboptimal lighting conditions, while older buildings consume significant amounts of electricity. To reduce energy waste and usage, it is crucial to evaluate the entire library's performance, including indoor lighting, solar radiation, and interior temperature, from the initial design phase. The paucity of high-quality real-world data and procedural knowledge has hindered the accuracy of artificial intelligence (AI) models used in previous research. Consequently, the purpose of this study is to integrate distributed wireless sensor networks (WSN) and sensor techniques employing Internet of Things (IoT) and Building Information Modelling (BIM) approaches in order to reduce energy consumption by implementing a smart illumination technique. The purpose of this study is to examine the strategies and options involved in prototyping an IoT- and BIM-based intelligent illumination system and its effect on library maintenance. This paper presents several strategies for transforming the inefficient lighting system of a typical library into a sustainable one with a quick repayment period. This technology can substantially improve lighting control and energy efficiency by employing motion sensors to detect human movement and adjusting lighting in particular areas. As a result, this solution provides libraries with the opportunity to establish a more sustainable environment while simultaneously increasing productivity. This study concludes with strategies and solutions for instituting energy-efficient measures in libraries, particularly lighting systems. By integrating distributed wireless sensor networks and sensor techniques with IoT and BIM approaches, this research seeks to address the challenges posed by conventional lighting systems and enhance the energy efficiency of libraries as a whole. © 2023
الكلمات المفتاحية: Building information modelling Energy saving Internet of things Library building Lightning system Wireless sensor network (WSN)
Kadhim M.M.; Taban T.Z.; Abdullaha S.A.H.; Rheima A.M.; Hachim S.K.; Abed A.M.
Journal of Physics and Chemistry of Solids , Vol. 177
11 استشهاد Article English ISSN: 00223697
Department of Dentistry, Kut University College, Kut, Wasit, 52001, Iraq; Laser and Optoelectronics Engineering Department, Kut University College, Wasit, Kut, 10026, Iraq; Dijlah University College, Baghdad, 10022, Iraq; Department of Chemistry, College of Science, Mustansiriyah University, Baghdad, 14022, Iraq; College of Technical Engineering, The Islamic University, Najaf, 145231, Iraq; Medical Laboratory Techniques Department, Al-Turath University College, Baghdad, 10132, Iraq; Department of Air Conditioning and Refrigeration Engineering, Al-Mustaqbal University College, Hilla, 51001, Iraq
In this study, we evaluated the possible application of a two-dimensional silicon carbide monolayer, which is a similar to material graphene, as an anode material in rechargeable Mg-ion batteries based on density functional theory computations. In particular, we investigated the related electronic structures, structural geometry changes, Mg-ion diffusion characteristics, and the corresponding electrochemical characteristics during charging. The adsorption energy of Mg is higher on the six-ring member than other sites. The maximum theoretical capacity of SiC is as high as 683.99 mAh/g, which is accompanied by a negligible change in the Si–C spacing band. We also considered the changes in the open circuit voltage caused by the adatom concentrations due to the intercalation of Mg in Si. The open-circuit voltage range determined for the SiC monolayer after the adsorption of Mg adtoms also indicates that the SiC monolayer can be considered a promising anode material. Considerable charge transport of approximately one electron occurs in SiC nano-sheets from the Mg atom-, thereby making them electrically conductive, which is a requirement for an acceptable anode material. Furthermore, the SiC monolayer can be regarded as the best candidate for use as an anode material in magnesium-ion batteries because of its properties. © 2023 Elsevier Ltd
الكلمات المفتاحية: Anode material Capacity Mg-ion batteries Open circuit voltage Silicon carbide
Cao Y.; Mansir I.B.; Kumar Singh P.; Elhosiny Ali H.; Abed A.M.; El-Refaey A.M.; Aly A.A.; Tuyen Nguyen D.; Wae-hayee M.; Cuong Tran D.
Ain Shams Engineering Journal , Vol. 14 (9)
11 استشهاد Article Open Access English ISSN: 20904479
School of Computer Science and Engineering, Xi'an Technological University, Xi'an, 710021, China; Department of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia; Centre for Energy Research and Training, Ahmadu Bello University, P.M.B 1045, Zaria, Nigeria; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, U.P. 281406, Mathura, India; Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia; Research Center for Advanced Materials Science (RCAMS), King Khalid University, P.O. Box 9004, Abha, 61413, Saudi Arabia; Physics Department, Faculty of Science, Zagazig University, Zagazig, 44519, Egypt; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Basic and Applied Science, College of Engineering and Technology, Arab Academy for Science, Technology & Maritime Transport, Smart Village Campus, Cairo, Egypt; Department of Mechanical Engineering, College of Engineering, Taif University, Taif, 21944, Saudi Arabia; PATET Research Group, Ho Chi Minh City University of Transport, Ho Chi Minh city, Viet Nam; Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Songkhla 90110, Hatyai, Thailand; Institute of Engineering, HUTECH University, Ho Chi Minh city, Viet Nam
Free convection of Fe3O4-water inside the porous enclosure was investigated in the presence of magnetic fields. The SIMPLE algorithm was employed to solve the equations based on FVM. The inner wall of enclosure was considered in the constant flux and that of outer wall were at a constant temperature, respectively. Also, two other walls are thermal insulation and the radiation reflects to inner semi-annulus. An electric current coil for producing a magnetic field is wrapped around the semi-annulus. The effects of Rap=10and1000, the concentration (φAve=0,0.01and0.03), porosities (ε=0.4and0.7) and magnetic numbers (0≤Mn≤8×107) are investigated considering first laws of thermodynamics. The findings revealed that the mean Nusselt number has direct relation with the magnetic number, porosity, Rap and concentration, respectively. Moreover, increasing volume fraction from 0.01 to 0.03 in high magnetic number enhanced the Nusselt number by 32 %. © 2023 THE AUTHORS
الكلمات المفتاحية: Enclosure Heat transfer Magnetic nanofluid Natural convection Numerical method
Cao Y.; Salem M.; Nasr S.; Hamza Sadon S.; Kumar Singh P.; Abed A.M.; Dahari M.; Almoneef M.M.; Wae-hayee M.; Galal A.M.
Ain Shams Engineering Journal , Vol. 14 (9)
11 استشهاد Article Open Access English ISSN: 20904479
School of Computer Science and Engineering, Xi'an Technological University, Xi'an, 710021, China; School of Electrical and Electronic Engineering, Universiti Sains Malaysia (USM), Nibong Tebal, Penang, 14300, Malaysia; Advanced Functional Materials Laboratory (AFMQL), Department of Physics, Faculty of Science, King Khaled University, P.O. Box 9004, Abha, Saudi Arabia; Department of Petroleum &Mining Engineering, The Faculty of Engineering, Tishk International University, Kurdistan Region, Erbil, Iraq; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, U.P., Mathura, 281406, India; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Deparment of Electrical Engineering, Faculty of Engineering, Universiti Malaya, 50603, Kuala Lumpur, Malaysia; Physics Department, Faculty of Science, Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia; Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hatyai, Songkhla, 90110, Thailand; Department of Mechanical Engineering, College of Engineering in Wadi Alddawasir, Prince Sattam bin Abdulaziz University, Saudi Arabia; Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, P.O 35516, Mansoura, Egypt
Owing to the marine environmental pollution affected by cruises, the use of techniques to mitigate carbon dioxide emission (CO2) is vital. Since a quarter of the fuel energy input to the engine is lost, waste management for marine diesel engines can provide some valuable outputs by which the need for other energy conversion-based methods disappears. Hence, the current work proposes a novel model of waste heat recovery for a 1 MW marine diesel engine in a low-temperature framework by which outstanding results are predictable. The defined auxiliary model consists of an absorption power cycle and an ejector refrigeration cycle to produce useful electricity and cooling for air conditioning. This model is designed for the first time and comprehensively analyzed and optimized to set the most suitable state of operation. The potential of the model is measured through the exergy, environmental, economic, and net present value standpoints. Moreover, an advanced evolutionary algorithm based on the non-dominated sorting genetic algorithm-II is applied to reach the optimum cost and exergetic performance. The optimum state showed an exergy efficiency of 35.19 % and products’ specific cost of 53.01 $/GJ. Moreover, the optimum payback period and CO2 emission reduction equal 6.79 years and 21.5 kg/MWh, respectively. © 2022
الكلمات المفتاحية: Advanced evolutionary algorithm Auxiliary process Environmental pollution Marine diesel engine Waste heat recovery
Mahdi J.M.; Abed A.M.; Al-Saaidi H.A.; Ben Khedher N.; Ibrahim R.K.; Ben Amara M.
Case Studies in Thermal Engineering , Vol. 51
11 استشهاد Article Open Access English ISSN: 2214157X
Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University, Babylon, Iraq; Department of Refrigeration and Air Conditioning Engineering, Al-Turath University College, Baghdad, 27134, Iraq; Department of Mechanical Engineering, College of Engineering, University of Ha'il, Saudi Arabia; Laboratory of Thermal and Energetic Systems Studies (LESTE) at the National School of Engineering of Monastir, University of Monastir, Tunisia; Department of Medical Instrumentation Engineering, Al-Farahidi University, Baghdad, 10015, Iraq; Applied College, University of Ha'il, Saudi Arabia
Low-temperature stratification, high-volumetric storage capacity, and less-complicated material processing make phase-changing materials (PCMs) very suitable candidates for solar energy storage applications. However, their poor heat diffusivities and suboptimal containment designs severely limit their decent storage capabilities. In these systems, the arrangement of tubes conveying the heat transport fluid (HTF) plays a crucial role in heat communication between the PCM and HTF during phase transition. This study investigates a helical coil tube-and-shell thermal storage system integrated with a novel central return tube to enhance heat transfer effectiveness. Three-dimensional computational fluid dynamics simulations compare the proposed design against a baseline helical coil system without a return tube under equivalent conditions. Outcomes quantify the return tube's efficacy in augmenting heat transfer uniformity and accelerating phase transition. Adding the return tube markedly boosts heat storage and recovery rates, increasing charging by 88% and discharging by 56% versus the baseline. Moreover, total phase transition time reduces by 48% for melting and 36% for solidification with the return tube. The accelerated charging stems from sustained convective heat transfer inside the return tube even as the molten layer thickens. Meanwhile, enhanced solidification results from ongoing cooling of inner regions. Isotherm analysis visualizes the return tube's efficacy in maintaining thermal uniformity throughout the phase transition process. Overall, the return tube significantly improves PCM thermal response, demonstrating a novel but straightforward approach to address heat transfer limitations in latent thermal storage systems. © 2023 The Author(s)
الكلمات المفتاحية: Heat exchanger Helical coil Melting Phase change material Solidification
Smaisim G.F.; Abed A.M.; Hadrawi S.K.; Jahanbin F.
Clean Energy , Vol. 7 (3), pp. 519-531
11 استشهاد Article Open Access English ISSN: 25154230
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, 54001, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, 51001, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, 54001, Iraq; Department of Chemistry, Mashhad Branch, Islamic Azad University, Mashhad, Iran
In this study, based on the energy balance for different components of a double-layered vacuum-tube solar collector with a U-tube, the thermal performance of the collector unit is investigated separately using an analytical and quasi-dynamic method. The model used in this study determines the temperature distribution in longitudinal and radial directions. In this research, the effects of physical parameters and heat transfer including the size of the collector, thermal-loss coefficient, absorption coefficient, mass flow and thermal resistance of the air layer under different climate conditions have been evaluated on the performance of the vacuum-tube collector. The results showed that by increasing the diameter of the tube with constant length, the annual thermal efficiency of the collector increased. Also, in a fixed-diameter tube, with increasing tube length, the annual efficiency increases, but this increase is meagre for lengths of >1.5 m. The optimal mass flow rate for maximum efficiency has been obtained for cities with different climates. According to the results, the optimal flow for different climates has different values that can be optimized as a relationship between the average solar radiation annually as a symbol of temperature and flow. © 2023 The Author(s). Published by Oxford University Press on behalf of National Institute of Clean-and-Low-Carbon Energy.
الكلمات المفتاحية: dynamic simulation solar radiation solar-thermal energy sustainable development vacuum tube
Su Z.; Zhan W.; Sun Y.; Dahari M.; Abed A.M.; Elhosiny Ali H.; Algelany A.M.
Separation and Purification Technology , Vol. 314
11 استشهاد Article English ISSN: 13835866
Faculty of Physical Education, HuaiNan Normal University, AnHui Province, Huainan, 232038, China; Faculty of Physical Education, Universitity Pendidikan Sultan Idris, Tanjong Malim, 35900, Malaysia; Deparment of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, 50603, Malaysia; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia; Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha 61413, P.O. Box 9004, Saudi Arabia; Physics Department, Faculty of Science, Zagazig University, Zagazig, 44519, Egypt; Department of Mathematics, College of Science and Humanities in ALKharj, Prince Sattam bin Abdulaziz University, AL-Karj 11942, Saudi Arabia; Department of Mathematics, Faculty of Sciences, Fayoum University, Fayoum, 63514, Egypt
This research has been done with the aim of responding to two main human challenges, i.e. lack of energy resources and environmental issues. In this research, a new zero-emission system for producing power, liquid carbon dioxide, and liquid nitrogen has been evaluated from a techno-economic point of view, and then the optimal conditions of the system have been selected through multi-objective optimization. The primary energy source of the system is the biomass, which is produced through gasification with the oxygen produced by the ion transport membrane of syngas with high heating value. The integration of the gasification process with the ion transport membrane makes it possible to use the produced high-temperature syngas to heat the compressed air entering the ion transport membrane. The produced syngas enters the supercritical carbon dioxide oxy-fuel cycle as a fuel and produces power with zero carbon dioxide emissions. The oxygen required for oxy-fuel is again supplied through an ion transport membrane. In order to store and transport the carbon dioxide captured from oxy-fuel and the nitrogen output from the ion transport membrane, the Claude liquefaction cycle has been used. Before optimization, the payback time of the system was 11 years, whereas, by including the minimization of payback time and total annual operating cost of the system as the objective functions of optimization the payback time of the system was decreased, and the operating cost of the system was increased. The lowest payback time of the system was 5.7 years, and the corresponding operating cost was 46.58 M$/year. However, when the operating cost of the system reached its lowest value in the Pareto Front, it was associated with a 13 % decrease, while the payback time was associated with an increase of 263 %. © 2023 Elsevier B.V.
الكلمات المفتاحية: CO<sub>2</sub> capture and storage Ion transport membrane Multi objective optimization Techno-economic evaluation Zero emission
Hussein S.S.; Al-Hasani I.D.D.; Abed A.M.; Hanoon M.M.; Shaker L.M.; Alamiery A.A.; Kadhum A.A.H.; Isahak W.N.R.W.
Progress in Color, Colorants and Coatings , Vol. 16 (1), pp. 59-70
10 استشهاد Article English ISSN: 20082134
Department of Chemical Engineering, University of Technology, P. O. Box: 10001, Baghdad, Iraq; Technical Hospital Al-Muthana, Ministry of Health, P. O. Box: 66002, Al-Muthana, Iraq; Air Conditioning and Refrigeration Technology Department, Al-Mustaqbal University College, P. O. Box: 51001, Babylon, Iraq; Department of Production Engineering and Metallurgy, University of Technology, P. O. Box: 10001, Baghdad, Iraq; Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM), P.O. Box: 43000,Selangor, Bangi, 43600, Malaysia; Energy and Renewable Energies Technology Center, University of Technology, P. O. Box: 10001, Baghdad, Iraq; Department of Medicine, University of Al-Ameed, P. O. Box: 56001, Karbala, Iraq
Mild steel is widely utilised as a construction material because of its mechanical qualities and low cost but its weak acid corrosion resistance limits its application. The ability of para-chlorobenzoyl-hydrazinylmethane (P-CBHM) as a corrosion inhibitor and antibacterial agent was investigated by gravimetric measurements, density functional theory (DFT) and antibacterial studies. The weight loss results showed that the inhibition efficiency of P-CBHM to prevent the corrosion of mild steel in 1.0 M HCl increased with concentration from 100 to 500 ppm, with a maximum inhibition efficiency of 96.5 % at 500 ppm. The inhibitory action of the inhibitor was explained in terms of adsorption on the mild steel surface which follows a Langmuir isotherm via physisorption and chemisorption mechanisms. P-CBHM has significant corrosive protection efficacy and antimicrobial activity similar to the common antibacterial agent, chloramphenicol. The novelty of this work was the investigation of the protective response of P-CBHM which was analysed analytically on the corrosion of mild steel in 1.0 M hydrochloric acid using gravimetric and thermometric techniques and its antibacterial effects. © Institute for Color Science and Technology
الكلمات المفتاحية: Corrosion inhibitor Dft Gravimetric Mild steel P-cbhm
Tian M.-W.; Abed A.M.; Chauhan B.S.; Alsenani T.R.; Almujibah H.; Aouaini F.; Alkhalaf S.; Deifalla A.
Case Studies in Thermal Engineering , Vol. 49
10 استشهاد Article Open Access English ISSN: 2214157X
School of Economics and Business Foreign Languages, Wuhan Technology and Business University, Wuhan, 430065, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, (UP), Mathura, India; Department of Electrical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Civil Engineering, College of Engineering, Taif University, P.O. Box 11099, Taif City, 21974, Saudi Arabia; Department of Physics, College of Science, Princess Nourah Bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia; Department of Computer, College of Science and Arts in Ar Rass, Qassim University, Ar Rass, Saudi Arabia; Department of Structural Engineering and Construction Management, Future University in Egypt, New Cairo City, 11835, Egypt
Produced CO2 from fossil fuel-based transportation vehicles and energy systems can have a direct impact on people who live in adjacent of the power plants. So, in the present work, we proposed and modeled an integrated system comprising a gas engine, a carbon dioxide capturing unit, an absorption chiller, and a greenhouse. The greenhouse uses directly the CO2 produced in gas engine through the carbon dioxide capturing unit to mitigate the emitted CO2 into the atmosphere. Besides that, the produced heating in gas engine could be exerted in a cycle to render the greenhouse space in cold weather condition. In warm seasons this thermal energy could also be delivered to an absorption chiller for producing required cooling for inside space of the greenhouse. Herein, the generated electricity is sold to grid, and an economic analysis is brought about. To evaluate and estimate the system performance and interest of selling electricity, a mathematical function was applied. The results show that, during cold seasons, the maximum possible net interest is 800,000 $, and for warm seasons is 2,500,000 $. The maximum COP is also achieved by 1.007. Finally, the amount of CO2 emission rate is mitigated at least 50%. © 2023 The Authors
الكلمات المفتاحية: Absorption chiller Annual interest CCHP CO<sub>2</sub> capturing Greenhouse gases Task analysis
Alaiwi Y.; Abed A.M.; Smaisim G.F.; Aly M.A.S.; Hadrawi S.K.; Morovati R.
International Journal of Low-Carbon Technologies , Vol. 18, pp. 191-203
10 استشهاد Article Open Access English ISSN: 17481317
Department of Mechanical Engineering, Altinbas University, Istanbul, 34217, Turkey; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, 54001, Iraq; Department of Electrical and Computer Engineering, Georgia Tech Shenzhen Institute (GTSI), Tianjin University, Guangdong, Shenzhen, 518055, China; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, Islamic University, Najaf, 54001, Iraq; Department of Engineering, Balkh University, Mazar-i-Sharif, 1702, Afghanistan
Today, the use of alternative fuels that have plant origin has attracted the attention of most countries because these fuels emit less pollution. In this research, bioethanol production has been evaluated considering solar energy sources. In the present study, the possibility of developing net-zero energy concepts in a bioethanol production plant as one of the most consumed energy industries in the field of bio-systems of the country from a technical and economic perspective was investigated. The purpose of this research is to model the bioethanol production plant with the aim of achieving zero net energy using a photovoltaic system. In addition, technical and economic analyses have been used in different approaches for a more detailed investigation. According to the modeling done, in the zero net energy approach, the results showed that the maximum production of electrical energy by the photovoltaic cell is 76.6 GWh/y. For this approach, the return on investment is 10.7 years. The area required to install photovoltaic modules in this approach is very large and equal to 88 334 m2. © 2023 The Author(s). Published by Oxford University Press.
الكلمات المفتاحية: bioethanol electrical energy Keywords: net-zero energy photovoltaic sustainable development
Xia J.; Yan G.; Abed A.M.; Nag K.; Galal A.M.; Deifalla A.; Li J.
Chemosphere , Vol. 336
10 استشهاد Article English ISSN: 00456535
Chongqing Creation Vocational College, Yongchuan, Chongqing, 402160, China; School of Intelligent Construction, Luzhou Vocational and Technical College, Luzhou, 646000, China; Luzhou Key Laboratory of Intelligent Construction and Low-carbon Technology, Luzhou, 646000, China; Air Conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; College of Engineering and Technology, American University of the Middle East, Kuwait; Department of Mechanical Engineering, College of Engineering in Wadi Alddawasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, P.O 35516, Mansoura, Egypt; Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; College of Engineering Management, Nueva Ecija University of Science and Technology, Cabanatuan, Philippines
A hybrid energy cycle (HEC) based on biomass gasification can be suggested as an efficient, modern and low-carbon energy power plant. In the current article, a thermodynamic-conceptual design of a HEC based on biomass and solar energies has been developed in order to generate electric power, heat and hydrogen energy. The planned HEC consists of six main units: two electric energy production units, a heat recovery unit (HRU), a hydrogen energy generation cycle based on water electrolysis, a thermal power generation unit (based on LFR field), and a biofuel production unit (based on biomass gasification process). Conceptual analysis is based on the development of energy, exergy and exergoeconomic assessments. Besides that, the reduction rate of pollutant emission through the planned HEC compared to conventional power plants is presented. In the planned HEC, when hydrogen energy is not needed, excess hydrogen is feed into the combustion chamber to improve system performance and reduce the need for natural gas. Accordingly, the rate of polluting gases emitted from the cycle can be mitigated due to the reduction of fossil fuels consumption. Further, based on the machine learning technique (MLT), the level of biofuel produced from the mentioned process is estimated. In this regard, two algorithms (i.e., Support vector machine and Gaussian process regression) have been employed to develop the prediction model. The findings indicated that the considered HEC can produce about 10.2 MW of electricity, 153 kW of thermal power, and 71.8 kmol/h of hydrogen energy. In both training and testing sets, the Support vector machine model exhibits better behavior compared the two Gaussian process regression model. Based on machine learning technique, with increasing gasification pressure, the level of biofuel obtained from the process does not increase significantly. © 2023
الكلمات المفتاحية: Biofuel prediction Biomass gasification Environmental impacts Machine learning technique Thermodynamic
Lu J.; Abed A.M.; Nag K.; Fayed M.; Deifalla A.; Al-Zahrani A.; Ghamry N.A.; Galal A.M.
Chemosphere , Vol. 336
10 استشهاد Article English ISSN: 00456535
Guangxi Key Lab of Human-machine Interaction and Intelligent Decision, Nanning Normal University, Nanning, 530001, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; College of Engineering and Technology, American University of the Middle East, Kuwait; Full Professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; ‏Department of Mechanical and Materials Engineering, Faculty of Engineering, University of Jeddah, Jeddah, 21589, Saudi Arabia; Cairo University, Fuculty of Computers and Artificial Intelligene, Giza, Egypt; Department of Mechanical Engineering, College of Engineering in Wadi Alddawasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, P.O 35516, Mansoura, Egypt
In the present study, a biomass-based multi-purpose energy system that can generate power, desalinated water, hydrogen, and ammonia is presented. The gasification cycle, gas turbine, Rankine cycle, PEM electrolyzer, ammonia production cycle using the Haber-Bosch process, and MSF water desalination cycle are the primary subsystems of this power plant. On the suggested system, a thorough thermodynamic and thermoeconomic evaluation has been conducted. For the analysis, the system is first modeled and investigated from an energy point of view, after which it is similarly studied from an exergy point of view before the system is subjected to economic analysis (exergoeconomic analysis). The system is evaluated and modeled using artificial intelligence to aid in the system optimization process after energy, exergy, and economic modeling and analysis. The resulting model is then optimized using a genetic algorithm to maximize system efficiency and reduce system expenses. EES software does the first analysis. After that, it sends the data to MATLAB program for optimization and to see how operational factors affect thermodynamic performance and overall cost rate. To find the best solution with the maximum energy efficiency and lowest total cost, multi-objective optimization is used. In order to shorten computation time and speed up optimization, the artificial neural network acts as a middleman in the process. In order to identify the energy system's optimal point, the link between the objective function and the choice factors has been examined. The results show that increasing the flow of biomass enhances efficiency, output, and cost while raising the temperature of the gas turbine's input decreases cost while simultaneously boosting efficiency. Additionally, according to the system's optimization results, the power plant's cost and energy efficiency are 37% and 0.3950$/s, respectively, at the ideal point. The cycle's output is estimated at 18900 kW at this stage. © 2023
الكلمات المفتاحية: Absorption cooling system Biomass Desalination water Ejector Emission reduction Fuel cell Optimization Waste energy
Palanisamy S.K.; Udayakumar A.K.; Abed A.M.; Panchatcharam P.; Athisaya Rajah S.; Madhavan B.; Steephen A.
Symmetry , Vol. 15 (1)
9 استشهاد Article Open Access English ISSN: 20738994
Department of Mechanical Engineering, Study World College of Engineering, Coimbatore, 641105, India; Department of Electrical and Electronics Engineering, SRM Institute of Science and Technology, Ramapuram Campus, Chennai, 600089, India; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Hillah, 51001, Iraq; Department of Electronics and Communication Engineering, CMR Institute of Technology, Bengaluru, 560037, India; Department of Physics, CMR Institute of Technology, Bengaluru, 560037, India; Rathinam Research Centre, Rathinam Technical Campus, Coimbatore, 641021, India; Department of Physics, KPR Institute of Engineering and Technology, Coimbatore, 641407, India
In an expedition for green-energy generation and to lower the cost per watt of solar energy, environmentally friendly biotic colorants were separated from Tectona grandis seeds. The prime colorant in the extract is pelargonidin which sensitizes titanium dioxide (TiO2)-based photo anodes. The pelargonidin-sensitized TiO2 nanomaterials endured structural, photosensitive, spectral and current-voltage interpretations. Frontier molecular orbital analysis, physicochemical and electronic parameter computation, UV–visible and DOS spectral analysis, van der Waals prediction and molecular electrostatic potential map were performed theoretically with Gaussian tools, and IR symmetry response was computed using the crystal maker software package. The pelargonidin-sensitized TiO2-created dye-sensitized solar cells which exhibited capable solar light energy to photon conversion proficiency. For comparative purposes, the commercial P25 Degussa TiO2-based DSSC was also fabricated and its proficiency was analyzed. The commercial TiO2 exhibited 57 % higher proficiency in comparison to the sol-gel-derived TiO2-based DSSC. © 2022 by the authors.
الكلمات المفتاحية: dye-sensitized solar cells pelargonidin dye symmetry studies titanium dioxide
Abed A.M.; Ameer S.A.A.; Abdtawfeeq T.H.; Ibrahim A.K.; Ruhaima A.A.K.; Yada A.; Smaisim G.F.; Shariati A.R.
Fluid Phase Equilibria , Vol. 565
9 استشهاد Article English ISSN: 03783812
Air conditioning and refrigeration techniques engineering department, Al-Mustaqbal University College, Babylon, Iraq; Ahl Al Bayt University, Karbala, Iraq; Medical technical college, Al-Farahidi University, Baghdad, Iraq; Department of Pharmacy, AlNoor University College, Bartella, Iraq; AL-Nisour University College, Baghdad, Iraq; Department of CEA, GLA University, Mathura, 281406, India; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Islamic Azad University Science and Research branch, Tehran, Iran
In this research, the SAFT-VR Morse has been extended to polar system by considering the dipolar interactions between non-spherical molecules. The second order derivative thermodynamic properties of refrigerants such as speed of sound, specific heat capacity and Joule-Thomson coefficient have been predicted and compared to PPC-SAFT EoS. The model parameters have been obtained using vapor pressure and saturated liquid density data of pure refrigerants. Using obtained model parameters the aforementioned properties have been predicted in the vapor, liquid, saturation and supercritical phases. The effect of polar contribution on model prediction performance has been studied. The results show that, the polar contribution can be neglected without losing model accuracy. The obtained average error of the polar PC-SAFT and polar SAFT-VR Morse is very close to their original versions. As well, the PPC-SAFT EoS gives accurate results compared to SAFT-VR Morse and its polar version, especially in the case of Joule-Thomson coefficient prediction. © 2022
الكلمات المفتاحية: Heat capacity Joule-Thomson PC-SAFT Refrigerants SAFT-VR Speed of sound
Liu N.; Abed A.M.; Sulaiman J.M.A.; Altamami A.A.; Mohammed S.; AbdulAmeer S.A.; Hadrawi S.K.; abdulQader A.A.H.; Shamsborhan M.; Alizadeh A.; Nasajpour-Esfahani N.; Sabetvand R.
Journal of Energy Storage , Vol. 68
8 استشهاد Article English ISSN: 2352152X
School of Intelligent Manufacturing, Qingdao Huanghai University, Shandong, Qingdao, 266427, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Dental Industry Techniques, Al-Noor University College, Bartella, Iraq; Independent researcher, Iraq; College of Medical Technology, Al-Farahidi University, Iraq; Ahl Al Bayt University, Kerbala, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Al-Amarah University College, Al-Amarah, Iraq; Department of Mechanical Engineering, College of Engineering, University of Zakho, Zakho, Iraq; Department of Mechanical Engineering, College of Engineering, Urmia University, Urmia, Iran; Georgia Institute of Technology, Department of Material Science and Engineering, 771 Ferst Dr NW, Atlanta, 30332, GA, United States; Department of Energy Engineering and Physics, Faculty of Condensed Matter Physics, Amirkabir University of Technology, Tehran, Iran
The addition of nanoparticles (NPs) can change the thermophysical properties of materials. Hence, adding NPs to phase change materials (PCMs) can accelerate phase transition processes. Moreover, the NPs concentration changes can change the structures' dynamic and thermal properties. Thus, it is crucial to survey how the volume fraction (size and atomic ratio) of NPs affects the PCM's thermal behavior. In the current work, molecular dynamics (MD) simulation was used to examine the thermal behavior of PCM microcapsules containing gold NPs. These microcapsules were taken into consideration together with aminoacetaldehyde (C2H5NO) and bromohexadecane (BrC16) as PCM, and the effect of gold nanoparticle radius and atomic ratio on simulated structure's thermal behavior was investigated. The findings demonstrate that charging and discharging periods were shortened by increasing the radius and atomic ratio of gold NPs in the atomic microcapsule structure. The heat flux (HF), and thermal conductivity (TC), on the other hand, are increased by increasing the radius of NPs from 3 to 6 nm, reaching 299.43 W/m2 and 1.42 W/mK, respectively. Moreover, by increasing the atomic ratio of NPs from 0.01 to 0.05, HF and TC values increased to 300.08 W/m2 and 1.45 W/mK, respectively. Furthermore, increasing the radius and atomic ratio of gold NPs in the microcapsule structure increased viscosity and phase change time. The methods offered in this study might be used as a viable mechanism in application domains to improve the thermal efficiency of this structure. © 2023
الكلمات المفتاحية: Microcapsules Molecular dynamics simulation Nanoparticles Thermal behavior
Abdelbasset W.K.; Jasim S.A.; Abed A.M.; Altimari U.S.; Eid M.M.; Karim Y.S.; Elkholi S.M.; Mustafa Y.F.; Jalil A.T.
International Journal of Materials Research , Vol. 114 (6), pp. 505-513
7 استشهاد Article English ISSN: 18625282
Department of Health and Rehabilitation Sciences, College of Applied Medical Sciences, Prince Sattam Bin Abdulaziz University, P.O. Box. 173, Al-Kharj, 11942, Saudi Arabia; Department of Physical Therapy, Kasr Al-Aini Hospital, Cairo University, Giza, 12613, Egypt; Medical Laboratory Techniques Department, Al-maarif University College, Al-Anbar-Ramadi, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Al-Nisour University College, Baghdad, Iraq; Department of Physical Therapy, College of Applied Medical Sciences, Taif University, Taif University, P.O. Box. 11099, Taif, 21944, Saudi Arabia; Al-Manara College for Medical Sciences, Maysan, Iraq; Department of Rehabilitation Sciences, College of Health and Rehabilitation Sciences, Princess Nourah Bint Abdulrahman University, P.O. Box. 84428, Riyadh, 11671, Saudi Arabia; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Mosul, Mosul, 41001, Iraq; Faculty of Biology and Ecology, Yanka Kupala State University of Grodno, Grodno, 230023, Belarus; College of Technical Engineering, The Islamic University, Najaf, Iraq
In today's world, wound healing is a growing serious problem for clinical institutes. In this study, nanofibrous scaffolds were prepared using polyurethane as a mat scaffold. Also, by immersing curcumin as an antibacterial component another scaffold was fabricated using the electrospinning technique. The obtained scaffolds were characterized by means of scanning electron microscopy, tensile analysis, porosity, and water vapor transmission rate. MTT and DAPI staining were used to prove the biocompatibility and cell attachment of the nanofibers. The curcumin incorporated into the PU scaffold can stop both the Gram-negative and Gram-positive bacteria activities through direct contact with them. Studies showed that the PU/Curcumin scaffold has considerable ability to play a key role in wound healing applications. © 2023 Walter de Gruyter GmbH, Berlin/Boston.
الكلمات المفتاحية: Antibacterial activity Nanofibrous scaffold Wound healing
Azar A.T.; Abed A.M.; Abdul-Majeed F.A.; Hameed I.A.; Jawad A.J.M.; Abdul-Adheem W.R.; Ibraheem I.K.; Kamal N.A.
Machines , Vol. 11 (4)
7 استشهاد Article Open Access English ISSN: 20751702
College of Computer and Information Sciences, Prince Sultan University, Riyadh, 11586, Saudi Arabia; Faculty of Computers and Artificial Intelligence, Benha University, Benha, 13518, Egypt; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Hillah, 51001, Iraq; Aeronautical Department, College of Technical Engineering, Alfarahidi University, Baghdad, 10070, Iraq; Department of ICT and Natural Sciences, Norwegian University of Science and Technology, Larsgårdsve-gen, 2, Ålesund, 6009, Norway; Department of Computer Techniques Engineering, Al-Rafidain University College, Baghdad, 46036, Iraq; Department of Electrical Engineering, College of Engineering, University of Baghdad, Baghdad, 10001, Iraq; Department of Computer Techniques Engineering, Dijlah University College, Baghdad, 10022, Iraq; Faculty of Engineering, Cairo University, Giza, 12613, Egypt
This paper presents a novel extended state observer (ESO) approach for a class of plants with nonlinear dynamics. The proposed observer estimates both the state variables and the total disturbance, which includes both exogenous and endogenous disturbance. The study’s changes can be summarized by developing a sliding mode higher-order extended state observer with a higher-order augmented state and a nonlinear function for the estimation error correction terms (SMHOESO). By including multiple enhanced states, the proposed observer can monitor total disturbances asymptotically, with the second derivative of the total disturbance serving as an upper constraint on the estimation error. This feature improves the observer’s ability to estimate higher-order disturbances and uncertainty. To extend the concept of the linear extended state observer (LESO), a nonlinear function can modify the estimation error in such a way that the proposed observer can provide faster and more accurate estimations of the state and total disturbance. The proposed nonlinearity also reduces the chattering issue with LESOs. This research thoroughly examines and analyzes the proposed SMHOESO’s convergence using the Lyapunov technique. According to this analysis, the SMHOESO is asymptotically stable, and the estimation error can be significantly reduced under real-world conditions. In addition to the SMHOESO, a modified Active Disturbance Rejection Control (ADRC) scheme is built, which includes a nonlinear state error feedback (NLSEF) controller and a nonlinear tracking differentiator (TD). Several nonlinear models, including the Differential Drive Mobile Robot (DDMR), are numerically simulated, and the proposed SMHOESO is compared to several alternative types, demonstrating a significant reduction in controller energy, increased control signal smoothness, and accurate tracking of the reference signal. © 2023 by the authors.
الكلمات المفتاحية: extended state observer feedback stabilization mobile robot output tracking sliding mode control
Malekshah E.H.; Abed A.M.; Aybar H.Ş.
Engineering Analysis with Boundary Elements , Vol. 146, pp. 407-417
7 استشهاد Article English ISSN: 09557997
Department of Power Engineering and Turbomachinery, Silesian University of Technology, Gliwice, 44-100, Poland; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Eastern Mediterranean University, TRNC, via Mersin 10, Turkey; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
A comprehensive experimental/numerical investigation is carried for the purpose of heat transfer and hydrodynamic analysis of natural convection within a cavity equipped with active rectangular fins. Numbers of hot and cold fins are fitted at the surface of square cavity which have remarkable effect on the hydrothermal performance of cavity. In this work, some parameters with significant impact on hydrothermal performance are selected to be studied such as value of Rayleigh number (Ra), value of nanoparticle volume concentration (φV) and arrangement of active fins (Ther.Arr A, B, C and D). To reach this purpose, numerical approach and empirical observations are coupled to provide an accurate data. In order to make the standard Lattice Boltzmann Method (LBM) compatible with the non-uniform grid distribution, the Taylor series expansion and least square-based lattice Boltzmann method (TLLBM) is used. Furthermore, firstly, the SiC-EG nanofluid samples are prepared using modern experimental, and then its rheological and thermal properties are measured using modern devices. It is concluded that using of nanofluid and the thermal arrangement of fins, have significant impact on the thermal performance of cavity. © 2022 Elsevier Ltd
الكلمات المفتاحية: Hydrothermal analysis Multi-fin plate Nanofluid Natural convection Second law analysis
Wang H.; Abed A.M.; Al-Zubaidi A.; Deifalla A.; Galal A.M.; Zhou Y.; Ghoushchi S.P.
International Journal of Thermal Sciences , Vol. 192
7 استشهاد Article English ISSN: 12900729
School of Mechanical Engineering, Xijing University, Shaanxi, Xi'an, 710123, China; Air Conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mathematics, College of Science, King Khalid University, Abha, 61413, Saudi Arabia; Full Professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Department of Mechanical Engineering, College of Engineering in Wadi Alddawasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, P.O 35516, Mansoura, Egypt; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam
Considering that turbulators generally have a high pressure drop level and as a result low thermal performance, in this research a numerical study conducted for a new form of aerodynamically designed turbulators that are concentrically perforated to have less pressure drop. In this study, the effects of a novel perforated teardrop-shaped turbulator (PTST) on the hydro-thermal parameters were numerically examined. Results were compared with a plain tube and a tube equipped with a simple teardrop-shaped turbulator (STST). PTST with the horizontal perforation geometry including a square, hexagon, octagon, and circle holes was installed inside a copper tube with constant wall temperature. The effect of the horizontal perforation cross-section area on the heat transfer and pressure drop was also evaluated. Tests were conducted under turbulence flow rates in the range of 0.044–0.099 kg/s. To select the optimal case, the thermal enhancement factor (TEF) was calculated. The results clarified that the hole area and hole geometry have a significant effect on TEF and hydro-thermal parameters. The highest heat transfers and pressure drop took place in the presence of the STST, while the highest TEF was equivalent to 1.39 and occurred in the presence of a PTST with a 5 mm diameter circular hole. The heat transfers in the presents of STST and PTST increased by 310.1% and 298% compared to the plain tube. Finally, a correlation expressing the relationship of TEF and perforation area was also presented based on curve fitting. © 2023
الكلمات المفتاحية: Heat transfer Numerical studies Perforated teardrop-shaped turbulator Pressure drop
Obaid N.M.; Sultan H.S.; Abed A.M.; Jweeg M.J.; Kadhim A.M.; Abdullah O.I.
Environmental Research, Engineering and Management , Vol. 79 (1), pp. 56-68
7 استشهاد Article Open Access English ISSN: 13921649
Renewable Energy Department, Ministry of Electricity, Iraq; College of Engineering Karbala, University of Warith Al-Anbiyaa, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq; College of Technical Engineering, Al-Farahidi University, Iraq; Department of Energy Engineering, College of Engineering, University of Baghdad, Iraq; Mechanical Engineering Department, College of Engineering, Gulf University, Bahrain; Institute of LAser and Systems Technologies (iLAS), Hamburg University of Technology, Germany
It can be considered that electric generating power from solar energy is an essential topic in the energy field. Several environmental factors affect the energy production of solar cells. Dust accumulation is one of the main factors which significantly negatively influences output energy. However, this topic is not investigated extensively, despite its significant impact, especially in arid areas such as Iraq. In this research paper, both theoretical and experimental techniques were applied to investigate the effect of accumulated dust particles on the efficiency of photovoltaic PV systems. An on-grid photovoltaic system was selected to achieve the experimental work. The results proved the negative effect of dust particles on the performance of the solar cell. Based on the obtained results, a new relationship was introduced between efficiency degradation and the amount of dust that accumulated on the surfaces of cells. This correlation is considered a necessity to find the characteristics of PV solar systems to improve their performance and efficiency. The new correlation introduced in this paper can be considered a promising prediction tool to estimate the characteristics of photovoltaic solar cells under different actual environment working conditions. The output power of the cleaned array system increased by 5–26% compared with the untreated system over the test period. Furthermore, the performance ratio (PR) was enhanced within the cleaned array system by 3 to 6 compared with the uncleaned array. A significant formula introduced the connection between the actual output power of the PV systems and the environmental condition (dust accumulation), where it can be considered as feedback to keep the performance in a steady status, which means obtaining the highest output power. © The Authors.
الكلمات المفتاحية: dust accumulation output power photovoltaic efficiency radiation attenuation
Ali F.H.; Hamzah H.K.; Ahmed S.Y.; Ismael M.A.; Haddad Z.; Ghalambaz M.; Abed A.M.; Al-Farhany K.; Jamshed W.; Eid M.R.
International Journal of Modern Physics B , Vol. 37 (29)
7 استشهاد Article English ISSN: 02179792
Mechanical Engineering Department, College of Engineering, University of Babylon, Hilla, Babylon City, Iraq; Mechanical Engineering Department, Engineering College, University of Basrah, Basra, Iraq; Institute of Electrical and Electronic Engineering, University M’Hamed Bougara of Boumerdes, Boumerdes, Algeria; College of Engineering, University of Warith Al-Anbiyaa, Karbala, Iraq; Laboratory on Convective Heat and Mass Transfer, Tomsk State University, Tomsk, 634045, Russian Federation; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, University of Al-Qadisiyah, Al-Qadisiyah, 58001, Iraq; Department of Mathematics, Capital University of Science and Technology (CUST), Islamabad, 44000, Pakistan; Department of Mathematics, Faculty of Science, New Valley University, Al-Wadi Al-Gadid, Al-Kharga, 72511, Egypt; Department of Mathematics, Faculty of Science, Northern Border University, Arar, 1321, Saudi Arabia
Convective flowing and heat transference of non-Newtonian liquid comprising nano-encapsulated phase-changing material (NEPCM) suspensions, filled in a square cavity, is numerically investigated. The molecules of NEPCM are cored with n-octadecane, shelled by polymethyl-methacrylate, and suspended in non-Newtonian fluid. The enclosure is insulated horizontally and heated vertically. Finite element method (FEM) is implemented for the numerical solution under di®erent variables such as nanoparticles volume fraction (0 < < 0:05), Stefan number (Ste = 0:2; 0:313; 0:5), the heat capacity ratio () of about (0.4), the temperature of fusion of the NEPCM (0 <f < 1) and the density ratio (P = f) (0:7 <P =f 0:9). The results show that the Nusselt quantity is related to the fusion temperature. An improvement in heat transference is observed when the fusion temperature deviates from the wall temperature, which is in the range of 0:25 <f < 0:75. For all power law index values (n), a linear increase of the Nusselt number with the solid volume fraction is detected. The shear-thinning nanofluid (n = 0:6) demonstrates higher Nusselt number values than those of n = 1 and 1.4. © World Scientific Publishing Company.
الكلمات المفتاحية: fusion temperature Nanoencapsulation non-Newtonian phase change
Hasan H.A.; Sherza J.S.; Abed A.M.; Togun H.; Ben Khedher N.; Sopian K.; Mahdi J.M.; Talebizadehsardari P.
Frontiers in Chemistry , Vol. 10
7 استشهاد Article Open Access English ISSN: 22962646
Department of Air Conditioning and Refrigeration Techniques, AL-Esraa University College, Baghdad, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Biomedical Engineering, College of Engineering, University of Thi-Qar, Thi-Qar, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, Iraq; Department of Mechanical Engineering, College of Engineering, University of Ha’il, Ha’il, Saudi Arabia; Laboratory of Thermal and Energetic Systems Studies (LESTE) at the National School of Engineering of Monastir, University of Monastir, Monastir, Tunisia; Solar Energy Research Institute, University Kebangsaan Malaysia, Selangor, Malaysia; Department of Energy Engineering, University of Baghdad, Baghdad, Iraq; Centre for Sustainable Energy Use in Food Chains, Institute of Energy Futures, Brunel University London, Middlesex, Uxbridge, United Kingdom
This article deals with the impact of including transverse ribs within the absorber tube of the concentrated linear Fresnel collector (CLFRC) system with a secondary compound parabolic collector (CPC) on thermal and flow performance coefficients. The enhancement rates of heat transfer due to varying governing parameters were compared and analyzed parametrically at Reynolds numbers in the range 5,000–13,000, employing water as the heat transfer fluid. Simulations were performed to solve the governing equations using the finite volume method (FVM) under various boundary conditions. For all Reynolds numbers, the average Nusselt number in the circular tube in the CLFRC system with ribs was found to be larger than that of the plain absorber tube. Also, the inclusion of transverse ribs inside the absorber tube increases the average Nusselt number by approximately 115% at Re = 5,000 and 175% at Re = 13,000. For all Reynolds numbers, the skin friction coefficient of the circular tube with ribs in the CLFRC system is larger than that of the plain absorber tube. The coefficient of surface friction reduces as the Reynolds number increases. The performance assessment criterion was found to vary between 1.8 and 1.9 as the Reynolds number increases. Copyright © 2023 Hasan, Sherza, Abed, Togun, Ben Khedher, Sopian, Mahdi and Talebizadehsardari.
الكلمات المفتاحية: compound parabolic collector friction coefficient Nusselt number ribs solar thermal system thermal enhancement
Abed A.M.; Yakoob A.K.; Smaisim G.F.; Gatea H.T.
AIP Conference Proceedings , Vol. 2776
7 استشهاد Conference paper English ISSN: 0094243X
Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Mechanical Engineering Department, Faculty of Engineering, University of Kufa, Najaf, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Najaf, 54001, Iraq
Sanitization is a protective and strategic approach to contain SARS-CoV2 dissemination. As there is no feasible way to deal with the new COVID-19 pandemic, sanitization has a key role to play. A modified method to reduce the spread of the virus by constructing a fogging room with a disinfectant and a base fluid mixture has been examined. The nanometer-sized corona in micron-sized cough droplets can quickly reach inaccessible areas when infection is present. Therefore, efficient spray and jet method should be used to disinfect certain inaccessible surfaces. A stand-alone photovoltaic (PV) system represents a pollutant-free and cost-effective solution to the stated issue. The present study aims to design sizing of a small-scale solar panel -powered mobile cleaning and disinfection chamber system for coronavirus in Remote Locations. The objective is to evaluate the sizing of the PV system to power the disinfection chamber system that is used to eliminate the spread of the virus at a constant daily load profile. The system is composed of a fogging room, water tank, PV panels, and storage batteries. The disinfection chamber system requires an energy of approximately 218 Wp with about 38 hours of battery storage that can operate the system continuously after the sunset. Powering a mobile cleaning and disinfection chamber system with PV panels has plenty of advantages, including free-maintenance, easy installation, and energy saving. © 2023 AIP Publishing LLC.
الكلمات المفتاحية: Clean Control System Covid-19 Detection PV
Hamidatou S.; Nadir M.; Togun H.; Abed A.M.; Deghoum K.; Hadjad A.; Ahmadi G.
Heat and Mass Transfer/Waerme- und Stoffuebertragung , Vol. 59 (9), pp. 1635-1646
6 استشهاد Article English ISSN: 09477411
Energy and Mechanical Engineering Laboratory (LEMI), University of Boumerdes, Boumerdes, Algeria; Department of Biomedical Engineering, College of Engineering, University of Thi-Qar, Thi-Qar, 6400, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Renewable Energy Development Unit in Arid Zones (UDERZA), University of El Oued, 39000, El Oued, Algeria; Laboratory of New and Renewable Energy Development in Arid Zones (LENREZA), University of Ouargla, Ouargla, BP511, Algeria; Department of Mechanical and Aerospace Engineering, Clarkson University, Potsdam, 13699-5725, NY, United States
This study presents an experimental investigation to determine the heat transfer enhancement in a novel heat exchanger known as the "Helicoidal Square-Shaped Heat Exchanger" with and without using a nanofluid. The experiments were performed for the range of Reynolds numbers from 4400 to 8000, using nanofluid (Al2O3-pure water) at the concentrations 0.1, 0.25, and 0.5%. This experimental investigation found that the heat transfer ratio is improved by increasing the nanofluid concentrations and the flow Reynolds number. The highest value of the heat transfer ratio was at Re = 8000, and 0.5% concentration of nanofluids. The corresponding increment in the heat transfer rate was 13.46 %, the heat transfer coefficient augmented by 9.64 %, and the Nusselt number improved by 10.43% compared to the results obtained experimentally with distilled water. The results obtained for the distilled water were verified with the Dittus-Boelter equation and numerical simulation. In addition, all obtained experimental data were compared with the CFD simulation. The use of nanofluids for heat transfer enhancement has a wide range of applications. Therefore, the presented results suggest using Al2O3-water nanofluids to improve the efficiency of many renewable energy plants, including solar and geothermal energy systems. © 2023, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.
Liu Z.; Zhu K.; Abed A.M.; Toghraie D.
Molecular Catalysis , Vol. 535
6 استشهاد Article English ISSN: 24688231
College of Mechanical and Energy Engineering, Shaoyang University, Hunan, Shaoyang, 422000, China; Key Laboratory of Hunan Province for Efficient Power System and Intelligent Manufacturing, Shaoyang University, Hunan, Shaoyang, 422000, China; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
Catalytic combustion is a flame-free process which occurs at low temperatures and reduces less release of nitric oxide (NOx). Although catalysts help reduce the release of toxic gases, they have detrimental environmental effects. Therefore, by simulation these reactions, a constraint on the flammability limits and improving their performance can be achieved. In this research, using the molecular dynamics (MD) simulation, the catalytic combustion process of air-methane was studied in a helical microchannel. Palladium (Pd) was used as the catalyst. The results show that adding a Pd catalyst further improved the simulated structure's thermal performance(TP). The heat flux(HF) and thermal conductivity (TC) of atomic samples increased from 2067 W/m2 and 1.28 W/m.K to 2096 W/m2 and 1.45 W/m.K with an increase in atomic ratio Pd catalyst from 1 to 4%. Finally, the combustion efficiency (CE) converges to 93% in the presence of 4% Pd catalysts. By increasing the initial pressure (IP) from 0 to 10 bar, the maximum density did not change much, and the velocity and temperature values decrease in terms of the limitation in atomic oscillations. Increasing the IP reduces the HF and TC from 2096 W/m2 and 1.45 W/m.K to 1981 W/m2 and 1.19 W/m.K. Regarding different types of combustion processes, such as catalytic combustion, were considered in different types of industrial applications, it is expected to study the effect of the parameters of the atomic ratio of Pd catalyst and the IP, propose an optimal mechanism to create catalytic combustion in real and practical samples. © 2022 Elsevier B.V.
الكلمات المفتاحية: Catalytic combustion Microchannel Molecular dynamics method Palladium
Oleiwi A.; Mohsen A.M.; Abdulkadhim A.; Abed A.M.; Laidoudi H.; Abderrahmane A.
Heat Transfer , Vol. 52 (5), pp. 3433-3452
6 استشهاد Article English ISSN: 26884534
Air Conditioning and Refrigeration Techniques Engineering Department, University of Warith Al-Anbiyaa, Karbala, Iraq; School of Engineering, Faculty of Innovation and Technology, Taylor's University, Subang Jaya, Malaysia; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Mohamed BOUDIAF, University of Science and Technology of Oran, Oran, Algeria; Laboratoire de Physique Quantique de la Mati'ere et Modélisation Mathématique (LPQ3M), University of Mascara, Mascara, Algeria
The present study examines the turbulent flow of mixed convection heat transfer enhancement within a rectangular channel considering three different novel shapes of ribs (smooth, scalene, and curved-side triangular). The investigations were conducted experimentally by developing a new test facility, while the numerical computations were carried out using the finite volume method. The experimental work involves constructing of the channel, ribs, and all equipment and measurement instruments. The numerical work is based on ANSYS FLUENT considering the k–ε turbulent model. The results are presented and compared in terms of Nusselt number, friction factor, and performance factors for Reynolds numbers ranging between 3000 and 12,000. By comparing the average values of the numerically obtained Nusselt number with experimental measurements, the data showed a close agreement with a maximum difference of 5%. It also found that scalene triangular ribs (STRs) provide better performance in terms of heat transfer, although introducing a slight increase in friction losses. STRs showed (20%) increase in Nusselt number compared with smooth channel, and 3%–6% increase in Nusselt number compared with curved-side triangular ribs (CTRs). In contrast, CTRs have a lower friction factor value of 5% compared with STRs at a low value of a Reynolds number of 3000. Furthermore, the Nusselt number changes significantly (250% increase) by increasing the value of the Reynolds number from 3000 to 12,000. A thermal performance factor of up to 1.28 was achieved for the STRs at the lowest range of Reynolds' number of 3000. The findings from the present study are of practical importance for industries requiring heat transfer enhancement techniques to improve heat transfer equipment performance. © 2023 Wiley Periodicals LLC.
الكلمات المفتاحية: CFD corrugated channel heat transfer mixed convection
Davoodabadi Farahani S.; Kazemi Majd B.; M. Abed A.
Alexandria Engineering Journal , Vol. 65, pp. 951-961
5 استشهاد Article Open Access English ISSN: 11100168
School of Mechanical Engineering, Arak University of Technology, Arak, 38181-41167, Iran; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
The present research aims to study the effect of variables including permeability and thickness of porous media on the thermal and hydrodynamic behavior of an oscillating cylinder at a constant temperature. The finite volume technique is employed to model the flow field for various thicknesses of the porous layer and Darcy numbers at low Reynolds numbers. According to the results, raising the Reynolds number and decreasing the Darcy number will reduce the length of the wakes created behind the cylinder. The separation point occurs earlier as the permeability decreases. Additionally, increasing the porous media thickness and decreasing the Darcy number leads to a decline in the amplitude of oscillation of lift and drag coefficient and amplitude of oscillation in lateral and longitudinal directions. Using the porous layer, the amplitude of the displacement of the cylinder is reduced by about 55 %. Thickness, Darcy number, and the thermal conductivity ratio influence the average variation of the Nusselt number in porous media. For any Darcy number with a specific thermal conductivity ratio, the Nusselt number of the cylinder with a porous layer is larger than the one without porous media. For the oscillating cylinder with Da = 0.001, Re = 90, ks/kf = 1000 and a 0.3 porous layer thickness, it has been taken for a 25 % augment in heat transfer. © 2022 THE AUTHORS
الكلمات المفتاحية: Heat transfer Oscillating cylinder Permeability Porosity coefficient Porous media Thermal conductivity Ratio
Jie Z.; Binti Muhamad S.; Abed A.M.; Deifalla A.; Ghoushchi S.P.; Mat Rusni I.
Case Studies in Thermal Engineering , Vol. 45
5 استشهاد Article Open Access English ISSN: 2214157X
Jiangsu Shipping College, Nantong, 226010, China; Universiti Selangor, Selangor, 45600, Malaysia; Air Conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Full Professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam
Numerous studies have been conducted to assess the effect of using a V-cut twisted tape turbulator, bubble injection method, and CuO-water nanofluid as a working fluid separately on the hydrothermal parameters. For the first time, the current study aimed to comprehensively evaluate the effect of the simultaneous use of these three methods on the effectiveness, friction factor, and thermal performance enhancement factor of a double-tube heat exchanger. Experiments were conducted with Reynolds numbers ranging from 7200 to 14500. Air was injected into the working fluid with a flow rate of 2 to 6 L/min. A turbulator with different geometry was also inserted in the inner tube. The results showed that using the methods separately increased effectiveness by up to 81%, while their simultaneous use increased the effectiveness to 2.36 times that of the plain tube. The friction factor in the presence of these three methods is up to 1.11 to 14.36 times that of a plain tube heat exchanger, respectively. In addition, the results showed that combining these three methods significantly affected thermal performance enhancement factor (TEF), increasing it to 1.46. © 2023 The Authors
الكلمات المفتاحية: Bubble injection method Double tube heat exchanger Effectiveness Nano fluid Pressure drop V-cut twisted tape
Cao Y.; Nasr S.; Kumar Singh P.; Fateh M. Ameen H.; Abed A.M.; Anwar Khan S.; Yousuf Usmani A.; Ali R.; Aouaini F.; Ghandour R.
Ain Shams Engineering Journal , Vol. 14 (8)
5 استشهاد Article Open Access English ISSN: 20904479
School of Computer Science and Engineering, Xi'an Technological University, Xi'an, 710021, China; Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha 61413, P.O. Box 9004, Saudi Arabia; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, U.P., Mathura, 281406, India; Department of Petroleum Engineering, College of Engineering, Knowledge University, Erbil, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technology, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, Zakir Husain College of Engineering and Technology, Aligarh Muslim University, UP, Aligarh, 202002, India; Department of Physics, College of Science, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia; College of Engineering and Technology, American University of the Middle East, Egaila, 54200, Kuwait
In the present paper, the free convection heat transfer was simulated through an inclined circular enclosure with a square inside. The effects of Al2O3-Fe3O4 hybrid nanoparticles on heat transfer and fluid flow were evaluated using Buongiorno's mathematical model. The modeling was performed using the SIMPLE algorithm. The equation of each type of nanoparticle was solved separately in a water-based fluid. In this study, adding 2% volume fraction of each nanoparticle (Al2O3andFe3O4) to water, Rayleigh number (Ra=103and105), inclined angle (θ=0to60), the ratio of Brownian to thermophoresis diffusion for each nanoparticle (NBT=0.1to0.3) were studied on flow and heat transfer parameters. The study showed that increasing Rayleigh number, NBT,Al, and NBT,Fe decreases the maximum value of Al2O3andFe3O4 concentration. Also, at high Rayleigh numbers, the inclined angle did not change the heat transfer rate. © 2023 Faculty of Engineering, Ain Shams University
الكلمات المفتاحية: Buongiorno's model Free convection Hybrid nanofluid Inclined enclosure
Deghoum K.; Gherbi M.T.; Jweeg M.J.; Sultan H.S.; Abed A.M.; Abdullah O.I.; Djilani N.
International Journal of Energy for a Clean Environment , Vol. 24 (5), pp. 53-66
5 استشهاد Article English ISSN: 21503621
UDERZA Laboratory, University of El Oued, El Oued, 39000, Algeria; Department of Mechanical Engineering, University of El Oued, El Oued, 39000, Algeria; College of Technical Engineering, Al-Farahidi University, Baghdad, 10005, Iraq; University of Warith Al-Anbiyaa, College of Engineering, Karbala, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq; Energy Engineering Department, College of Engineering, University of Baghdad, Iraq; Mechanical Engineering Department, College of Engineering, Gulf University, Sanad, 26489, Bahrain; Hamburg University of Technology (TUHH), Institute of Laser and Systems Technologies (iLAS), Harburger Schloßstraße 28, Hamburg, 21079, Germany
In this study, a horizontal axis wind turbine blade model with a power of 5 kW was designed using a new MATLAB code based on the blade element momentum theory. The three-dimensional finite-element method was used to simulate and validate the wind turbine blade under normal and extreme operating conditions in order to evaluate the stress and deflection effects. International Standard IEC 61400.2 was applied to obtain the fatigue loads, estimate the damage, and predict the life of the blade. Based on the optimization approach, the flap-wise deflections were reduced by 11% and the trailing and leading edges were reduced by 31%. Based on the optimized design of the blade, the mass of the blade was reduced by 22%. Furthermore, the fatigue life of the blade was investigated and analyzed, in which the simplified load model (SLM) and the aeroelastic FAST software program were employed to predict the lifetime of the blade. Finally, it was found that based on the SLM method the design life of a 5-kW blade is 20 years when carbon fiber material is used. © 2023 by Begell House, Inc.
الكلمات المفتاحية: blade element momentum fatigue life International Standard IEC 61400.2 simplified load model small wind turbine
Bai Y.; Lin H.; M. Abed A.; Fayed M.; Mahariq I.; Salah B.; Saleem W.; Deifalla A.
Chemosphere , Vol. 334
4 استشهاد Article English ISSN: 00456535
Xi'an Jiaotong University, No.28, Xianning West Road, Shaanxi, Xi'an, 710049, China; Yuxi Normal University, Yunnan, Yuxi, 653100, China; Air Conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; College of Engineering and Technology, American University of the Middle East, Kuwait; Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh, 11421, Saudi Arabia; Department of Mechanical and Manufacturing Engineering, Institute of Technology, Sligo, F91 YW50, Ireland; Full Professor Future University in Egypt, South Teseen, New Cairo, 11835, Egypt
Considering the current crisis of fossil energies, the exploitation of renewables and green technologies is necessary and unavoidable. Additionally, the design and development of integrated energy systems with two or more output products and the maximum usage of thermal losses in order to improve efficiency can boost the yield and acceptability of the energy system. In this regard, this paper develops a comprehensive multi-aspect assessment of the operation of a new solar and biomass energies-driven multigeneration system (MGS). The main units installed in MGS are three electric energy generation units based on a gas turbine process, a solid oxide fuel cell unit (SOFCU) and an organic Rankine cycle unit (ORCU), a biomass energy conversion unit to useful thermal energy, a seawater conversion unit into useable freshwater, a unit for converting water and electricity into hydrogen energy and oxygen gas, a unit for converting solar energy into useful thermal energy (based on Fresnel collector), and a cooling load generation unit. The planned MGS has a novel configuration and layout that has not been considered by researchers recently. The current article is based on presenting a multi-aspect evaluation to study thermodynamic-conceptual, environmental and exergoeconomic analyzes. The outcomes indicated that the planned MGS can produce about 6.31 MW of electrical power and 0.49 MW of thermal power. Furthermore, MGS is able to produce various products such as potable water (∼0.977 kg/s), cooling load (∼0.16 MW), hydrogen energy (∼1.578 g/s) and sanitary water (∼0.957 kg/s). The total thermodynamic indexes were calculated as 78.13% and 47.72%, respectively. Also, the total investment and unit exergy costs were 47.16 USD per hour and 11.07 USD per GJ, respectively. Further, the content of CO2 emitted from the desgined system was equal to 10.59 kmol per MWh. A parametric study has been also developed to identify influencing parameters. © 2023
الكلمات المفتاحية: Biomass Environmental impacts Freshwater Green energy Hydrogen
Wekke I.S.; Iswanto A.H.; Abed A.M.; Ali M.H.; Samal A.; Talib H.A.; Islam Z.; Mustafa Y.F.; Kzar H.H.; Beheshtizadeh N.
International Journal of Body, Mind and Culture , Vol. 10 (1), pp. 90-98
4 استشهاد Article English ISSN: 23455802
Graduate Program Institut Agama Islam Negeri Sorong, Sorong, Indonesia; Department of Public Health, School of Health Science, University of Pembangunan Nasional Veteran Jakarta, Jakarta, Indonesia; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Al-Nisour University College, Baghdad, Iraq; Department of Tourism and Management Studies, Siksha 'O' Anusandhan Deemed to be University, Odisha, Bhubaneswar, India; College of Physical Education and Sport Science, Al-Ayen University, Thi-Qar, Iraq; Ahmad Ibrahim Kulliyyah of Laws International Islamic University Malaysia, Kuala Lumpur, Malaysia; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Mosul, Iraq; Department of Chemistry, College of Veterinary Medicine, Al-Qasim Green University, Al-Qasim, Iraq; Department of Social Sciences, School of Social and Economic Sciences, Al-Zahra University, Tehran, Iran
Background: Recognizing and strengthening emotional intelligence is useful in all members of society, especially students. By recognizing emotional intelligence and applying it, students can achieve more success in their career. The aim of this study was to investigate the relationship between emotional intelligence and academic achievement among students. Methods: A correlational study was performed on 100 students studying in clinical psychology at the School of Medicine, Trisakti University, Jakarta, Indonesia, in 2021. Bar-On test was used to evaluate the student’s emotional intelligence. Pearson correlation coefficient and independent t-test were used to analyze the research data with SPSS software. Results: There was a significant difference between the age variable with emotional intelligence (P < 0.05) and emotional intelligence with academic achievement (P < 0.01). In addition, the components of problem solving (r = 0.310, P = 0.002), stress tolerance (r = 0.291, P = 0.002), reality testing (r = 0.280, P = 0.004), interpersonal relationships (r = 0.217, P = 0.03), and optimism (r = 0.326, P = 0.005) had a significant relationship with the variable of age and the components of emotional Intelligence (r = 0.271, P = 0.005), independence of action (r = 0.187, P = 0.024), self-awareness (r = 0.283, P = 0.031), responsibility (r = 0.757, P = 0.042), and sympathy (r = 0.953, P = 0.034) with the academic achievement. Conclusion: In order to achieve high levels of academic achievement, students must be able to control emotions and affects in many ways; however, students cannot achieve their academic potential without reaching the components that make up emotional intelligence. © 2023, Vesnu Publications. All rights reserved.
الكلمات المفتاحية: Academic achievement Clinical psychology Emotional intelligence
Al-kaby R.N.; Al-Amir Q.R.; Hamzah H.K.; Ali F.H.; Abed A.M.
Journal of Thermal Analysis and Calorimetry , Vol. 148 (24), pp. 14337-14359
3 استشهاد Article English ISSN: 13886150
Mechanical Engineering Department, College of Engineering, University of Babylon, Babylon, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
Enhancing thermal performance and lowering heat loss in energy conversion systems are essential, especially for new and complicated products that make this requirement worse. In order to address this difficulty, this study looks at fluid flow and heat transmission using hybrid nanofluid and nanoporous materials in combination cavities. The numerical simulation of natural convection within a hollow two-dimensional cavity comprised of two connected tilted squares with a circular hollow at the center is investigated. The inner heated square is filled with a nanoporous material, whereas the rest of the cavity is filled with Cu-Al2O3 hybrid nanofluid. The COMSOL Multiphysics software is utilized to simulate the dimensionless governing equations. A comparison with previously published research showed a good agreement. Calculations are performed for different values of Ra number (Ra: 103, 104, 105, and 106), Darcy number (Da: 10–1, 10–2, 10–3, 10–4, and 10–5), volume fraction (φ: 0, 0.02, 0.04, and 0.06), width (W: 0, 0.1, 0.2, 0.3, and 0.4), and uniform porosity (ε: 0.2, 0.4, 0.6, and 0.8). The results demonstrated that the increase of the porosity leads to a decrease in the Nu number with the Rayleigh number increase. Darcy and Rayleigh numbers have a significant impact on the width (W) between the hybrid nanofluid and nanoporous layers. In addition to the above, the fluid flow slows down at Ra = 103, which causes S˙ gen,T ⌣ and Be to increase. The rising of Ra from 104 to 105 causes no change in the S˙ gen,T ⌣ because heat is primarily transported by conduction, but the maximum Be number is reduced. © 2023, Akadémiai Kiadó, Budapest, Hungary.
الكلمات المفتاحية: Combination cavity Cu-Al<sub>2</sub>O<sub>3</sub> hybrid nanofluid Fluid flow Heat transfer rate Nanoporous material
Abdulhaleem S.M.; Abed I.M.; Said N.M.; Abed A.M.
Engineering Analysis with Boundary Elements , Vol. 157, pp. 12-20
3 استشهاد Article Open Access English ISSN: 09557997
Mechanical Engineering Department, College of Engineering, University of Babylon, Babylon, 51001, Iraq; Department of Physics, College of Science, King Khalid University, Abha, 61413, Saudi Arabia; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq
This study investigated the effect of hybrid nanofluids Al₂O₃-SiO₂/water and Al₂O₃-CuO/water on heat transfer (HT) in parabolic solar collectors. The results revealed that, in general, the Nusselt number (Nu) and pressure drop enhance with increasing total volume fraction (ϕtot). The Two-phase Mixture model and SST k-ω turbulence model have been used for simulations. The Reynolds number range is 5000 to 30,000. At a constant ϕtot, the Nu increases with the volume fraction (ϕ) enhancement of Al₂O₃ and CuO in their corresponding hybrid nanofluids, but the pressure drops for both hybrid nanofluids do not follow the same trend as the Nu with the increment of nanoparticle concentration. Their performance coefficient does not show a uniform trend compared to the percentage of nanoparticles composition in hybrid nanofluids. For example, the value of the performance coefficient (PEC) for the percentage of Al₂O₃ (0.1%) - CuO (0.4%) and Al₂O₃ (0.75%) - CuO (0.25%) is almost equal. The maximum enhancement of Nu in Al₂O₃ (0.25%) - CuO (0.75%) /water is about 47%, and this value is 33% for the other hybrid nanofluid at the same ϕtot. Also, in addition to the total volume fraction, the performance coefficient strongly depends on the percentage of nanoparticles in the hybrid nanofluid at a fixed volume fraction. Nu increases of 26% and 48% indicate the total volume fractions of 0.5% and 1%, respectively, compared to the base fluid. © 2023 Elsevier Ltd
الكلمات المفتاحية: Heat transfer enhancement Hybrid nanofluids Pressure drop Thermal-hydraulic performance
Deghoum K.; Gherbi M.T.; Jweeg M.J.; Sultan H.S.; Abed A.M.; Abdullah O.I.; Djilani N.
International Journal of Renewable Energy Development , Vol. 12 (1), pp. 193-202
3 استشهاد Article Open Access English ISSN: 22524940
UDERZA Laboratory, University of El Oued, El Oued, 39000, Algeria; Department of Mechanical Engineering, University of El Oued, El Oued, 39000, Algeria; College of Technical Engineering, Al-Farahidi University, Baghdad, 10005, Iraq; University of Warith Al-Anbiyaa, College of Engineering Karbala, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq; Department of Energy Engineering, University of Baghdad, Iraq; Department of Mechanics Al-Farabi, Kazakh National University, Kazakhstan, Baghdad, Iraq; System Technologies and Engineering Design Methodology, Hamburg University of Technology, Hamburg, Germany
A wind turbine blade is an essential system of wind energy production. During the operation of the blade, it is subjected to loads resulting from the impact of the wind on the surface of the blade. This leads to appear large deflections and high fatigue stresses in the structure of blades. In this paper, a 5 kW horizontal axis wind turbine blade model is designed and optimized using a new MATLAB code based on blade element momentum (BEM) theory. The aerodynamic shape of the blade has been improved compared with the initial design, the wind turbine power has been increased by 7% and the power coefficient has been increased by 8%. The finite Element Method was used to calculate the loads applied to the blade based on Computational Fluid Dynamics (CFD) and BEM theory. High agreements were obtained between the results of both approaches (CFD and BEM). The ANSYS software was also used to simulate and optimize the structure of the blade by applying variable static loads 3.3, 6, and 8.3 kg and compared the results with the experimental results. It was reduced the maximum deflections with 37%, 42.85%, and 42.61% when using CFRP material and 4.5%, 15.45%, and 16.19% for GFRP material that corresponds to the applied forces. Based on the results, the mass of the optimized model decreased by 47.86% for GFRP and 71.24% for CFRP. IEC 61400.2 standard was used to estimate the fatigue loads, damage, blade life prediction, and verify blade safety using a Simplified Load Model (SLM) and FAST software. It was found that the blade will be safe under extreme wind loads, and the lifetime of the wind blade (GFRP) is 5.5 years and 10.25 years, according to SLM and FAST software, respectively. At the same time, the lifetime of the wind blade (CFRP) is more than 20 years, according to the two applied methods. © The author(s). Published by CBIORE.
الكلمات المفتاحية: composite materials damage FAST software fatigue life Simplified Load Model standard IEC 61400.2
Yan G.; Teng B.; Abed A.M.; Deifalla A.; Youshanlouei H.M.; Abdulghani Z.R.; Moria H.
Journal of Energy Storage , Vol. 58
2 استشهاد Article English ISSN: 2352152X
Chongqing Creation Vocational College, Yongchuan, Chongqing, 402160, China; Air conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Full professor Future University in Egypt, South teseen, New Cairo, 11835, Egypt; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam; Department of Mechanical Engineering Technology, Yanbu Industrial College, Yanbu Al-Sinaiyah City, 41912, Saudi Arabia
Buildings are one of the largest consumers of energy for cooling and heating systems to provide the comfort temperature for human living. The use of smart materials or phase change materials (PCMs) pave the road to prevent heat loss of buildings. This material is injected into a block called envelop, employed in Buildings' roof and floor. In the present study, a envelop filled PCM with a melting temperature of 16.5 ° C was designed and simulated by computational fluid dynamic (CFD) and was imposed surrounding air (robin boundary condition). Moreover, the effects of Buoyant force, creating free convection mechanism due to melting PCM and density change with temperature, was considered in this numerical method. Thus, this unsteady numerical study focused on three inclined angles (30 ≤ θ ≤ 60) and three solar heat flux ([Formula presented]) imposed in 12 h, whose effects were analyzed on the melting fraction, temperature contours for 12 h and melting fraction percentage at passing time after 12 h. The obtained results showed that the phase change line was perpendicular to gravity vector due to high buoyant force. Moreover, investigation of inclined angles was a vital parameter in PCM melting process. Furthermore, the indoor of building was safe from hot air outdoor at least 9 h exposing the worst solar heat flux. © 2022
الكلمات المفتاحية: Acetic acid Building's envelope CFD simulation Phase change material Robin boundary condition
Al Saffar I.Q.; Sultan H.S.; Jweeg M.J.; Abed A.M.; Abdullah O.I.; Schlattmann J.; Sabri L.A.; Alfilh R.H.C.
Heat Transfer Research , Vol. 54 (7), pp. 19-40
2 استشهاد Article English ISSN: 10642285
Mechanical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq; University of Warith Al-Anbiyaa, College of Engineering, Karbala, Iraq; College of Technical Engineering, Al-Farahidi University, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq; Department of Energy Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Hamburg University of Technology, Hamburg, Germany; Department of Mechanics, Al-Farabi Kazakh National University, Kazakhstan; Aeronautical Technical Engineering, Al-Farahidi University, Baghdad, Iraq; Refrigeration and Air-Conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq
There are many demands that are considered essential to obtain a successful design of frictional clutches. The main function of such a mechanical part is to transfer torque between driving and driven shafts. The time of engagement process for the clutch system should be as short as possible to reach the desired speed with the minimum losses of power. Owing to the high level of contact stresses that are generated between the sliding components of the frictional clutch, high thermal fields will be produced during the engagement period. The thermoelastic problem during the sliding time of the frictional system (single disc) employing the finite element method (FEM) was investigated deeply. In the present research paper, the effect of variable sliding speeds on the thermoelastic performance during applying a constant initial heat generation was explored. The new numerical models have been developed based on finite element axisymmetric simulation for the engagement process of the dry frictional clutch components. It was found that the sliding speed is more significant than the applied pressure when applying a constant frictional heat generation. © 2023 by Begell House, Inc.
الكلمات المفتاحية: dry friction clutch finite element analysis thermoelastic problem transient thermal problem
Abdullah O.I.; Hamzah A.A.; Ammar S.; Al-Tamimi A.N.J.; Aljibori H.S.S.; Mohammed M.N.; Abed A.M.; Hameed M.S.; Alani Z.N.
International Conference on Engineering Technologies and Applied Sciences: Shaping the Future of Technology through Smart Computing and Engineering, ICETAS 2023
2 استشهاد Conference paper English
University of Baghdad, Dept of Energy Engineering, Baghdad, Iraq; College of Engineerin, Gulf University, Mechanical Engineering Dept, Sanad, Bahrain; Hamburg University of Technology, Institute of Laser and Systems Technologies, Hamburg, 21079, Germany; College of Technical Engineering, Al-Farahidi University, Baghdad, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, Iraq; College of Engineering, Gulf University, Mechanical Engineering Department, Sanad, 26489, Bahrain; Al-Mustaqbal University College, Air Conditioning and Refrigeration Techniques Engineering Department, Iraq; American University of Bahrain, Department of Mechanical Engineering, Riffa, 942, Bahrain; College of Engineering, Gulf University, Architectural and Interior Design Engineering Department, Sanad, Bahrain
One of the most significant sources of renewable energy in the world is wind energy, and the fastest growing because of its unique advantages, such as cheap costs, and its friendliness to the environment, as it is a natural resource that is not subject to human control. Based on the detailed wind speed data for the selected site, the type of wind turbine is determined. In this research paper, QBlade software was used to analyze and simulate the horizontal axis wind turbine blades in order to increase the power coefficient. Also, it was analyzed the behavior deeply and the performance of the wind blade based on the Blade Element Momentum theory (BEM) to simulate the Horizontal Axis Wind Turbines (HAWTs). The effect of the twist angle and chord length of three horizontal axis wind turbine blades on the behavior and performance of wind turbines has been investigated. It used two airfoils (SD7062) and (S8066), each with a 1.5 -meter- long blade divided into 12 sections. The validity of the results of analyses and optimization was proved using the QBlade software. It was found that maximum values of the ratio (CL/CD) occurred when the angles of attack were 6.5 and 4, corresponding to the airfoils (SD7062) and (S8066), respectively. Based on the achieved analysis, the tip speed ratio (TSR) was equal to 7. © 2023 IEEE.
الكلمات المفتاحية: aerodynamic characteristics Blade Element Momentum theory horizontal axis wind turbine wind energy
Fadhil Smaisim G.; Hadrawi S.K.; Abed A.M.; Majdi H.S.; Shamel A.
Clean Energy , Vol. 7 (2), pp. 242-252
2 استشهاد Article Open Access English ISSN: 25154230
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, 54001, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, 54001, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Chemistry, Ardebil Branch, Islamic Azad University, Ardebil, Iran
Using combined cooling, heat and power systems can be an appropriate substitute for preventing emissions of pollutants and excessive consumption of fossil fuels. Utilizing renewable energy in these systems as a source of power generation can be an appropriate substitute for fossil-fuel-based systems. Therefore, in this paper, cogeneration cooling, heat and power systems based on gas-fired internal combustion engines with a solar-thermal system with evacuated tube collectors have been modelled and thermo-economic analysis has been done to compare fossil-fuel-based systems. The required rate of heat to supply the hot water is 50 kW. In the studied system, the internal combustion engine produces electrical energy. Then, the solar-thermal system with evacuated tube collectors and the gas-burning generator provide the thermal energy required by the studied building and the primary stimulus of the absorption chiller for cooling. In this study, two different scenarios are conducted in states considering simultaneous production systems and regardless of this environmental and thermo-economic analysis system. The results showed that the efficiency of the studied system was 60% in summer and 56% in winter. © 2022 The Author(s) 2023.
الكلمات المفتاحية: combined cooling environmental analysis evacuated tube collectors heat and power solar-thermal energy thermo-economic analysis
Abdullah O.I.; Ghanim M.S.; Jweeg M.J.; Sultan H.S.; Abed A.M.
AIP Conference Proceedings , Vol. 2776
2 استشهاد Conference paper English ISSN: 0094243X
Department of Energy Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq; Department of Mechanics, Al-Farabi Kazakh National University, Kazakhstan; Hamburg University of Technology, Hamburg, Germany; College of Technical Engineering, Al-Farahidi University, Baghdad, Iraq; University of Warith Al-Anbiyaa, College of Engineering, Karbala, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Baghdad, Iraq
In this research paper, the aerodynamic performance of the blade of horizontal axis wind turbine has been investigated numerically based on the the Blade Element Momentum (BEM) method. The blade in this analysis is divided into several computational elements, where assumed no aerodynamic interaction between the elements. The primary objective is to analyze the blade performance under certain initial and boundary conditions. In addition to investigate the effect of geometrical parameters that include the radius of the blade tip, the blade twist, the lift-to-drag ratio and the induction factors as the primary dynamic parameters on the performance of the wind blade. It was determined the design parameters for a wind turbine that built using NACA4415 airfoil shape. It was found that the total thrust force, the total torque and the total power that would be generated by the selected wind turbine are 3739.5 N, 1827.0 N.m and 29.9 kW, respectively. The results also showed that reducing the number of blade elements results in an underestimation of the results based on aerodynamic predictions. Therefore, the number of blade elements needs to be adequately selected for reliable solution of BEM equations. It was found that the maximum value of the differential power along the radial position on the wind turbine span occurred at r/R=0.8. Furthermore, the maximum percentages of increment in the axial induction factor when change the radial position from the tip to the root of blade was 62%. While, for the tangential induction factor was decreased by 88% for the same change. © 2023 Author(s).
Abbud L.H.; Al-Masoudy M.M.M.; Hussien Omran S.; Abed A.M.
Materials Today: Proceedings , Vol. 80, pp. 2495-2500
1 استشهاد Article English ISSN: 22147853
Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Energy and Renewable Energies Technology Center, University of Technology, Iraq
The mechanical properties of two commercial epoxides have been investigated in both unfilled and filled with varying the weight fraction of Nano Aluminum powder and Nano Aluminum with Nano Titanium powder. The values of Young's modulus, modulus of rigidity, yield stress, tensile strength, flexural strength have been studied at room temperature to identify the specific influence of Aluminum powder (the particle size for Aluminum powder is less than or equal to 50 nm (d ≤ 50). The weight fraction has different values (equals to 10%, 20% and 30%), and Nano Aluminum with Nano Titanium powder for Aluminum powder, the particle size (d) is less than or equal to 50 nm (d ≤ 50). The weight fraction has different values (equals to 10%, 20% and 30%). Also for Titanium powder, the particle size is less than or equal to 50 nm (d ≤ 50), and the weight fraction is 1% for each different weight fractions of Aluminum powder to epoxy resin. The experimental results obtained from laboratory have been analyzed in order to achieve the best result. It is concluded that Young's modulus and modulus of rigidity increase when the weight fraction for Nano Aluminum powder and Nano Aluminum with Nano Titanium powder increase. © 2021
الكلمات المفتاحية: Mechanical properties Nano Aluminum Nano Titanium Volume fraction
Candra A.I.; Patra I.; Sivaraman R.; Abed A.M.; Al-Azzawi W.K.; Smitt J.
International Journal of Structural Stability and Dynamics , Vol. 23 (2)
1 استشهاد Article English ISSN: 02194554
Civil Engineering, Faculty of Engineering, Kadiri University, Kediri, Indonesia; NIT Durgapur, West Bengal, Durgapur, India; Department of Mathematics, Dwaraka Doss Goverdhan Doss Vaishnav College, University of Madras, Arumbakkam, Tamil Nadu, Chennai, India; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Department of Medical Instruments Engineering Techniques, Al-Farahidi University, Baghdad, Iraq; XGLab - Bruker Nano Analytics, via Conte Rosso 33, Milano, Italy
Forced and free dynamic responses of nanobeams resting on a three-parameter foundation subjected to a moving force in magneto-hygro-thermal conditions are investigated based on the nonlocal strain gradient theory. Also, a detailed parametric study is conducted to identify the impact of slender ratio, axial and distributed tangential loads on the vibration characteristics and dynamic phenomena of the small-scale system. Comparative studies with existing results in the literature are performed to ensure the accuracy of the presented model and solution approach. Analytical and numerical methods are implemented to detect the effects of foundation coefficients, environmental conditions, geometrical and scale parameters on the dynamic amplification factor, critical moving force velocity, cancellation, and maximum free response mechanisms of the system. The outcomes revealed that the critical moving force velocity is enhanced by ascending the slender ratio, elastic, and shear moduli of the foundation. It is found that when the damping factor is considered for the foundation, it is feasible to prevent the occurrence of the cancellation phenomenon. Also, it is concluded that by fine-tuning scale parameters and environmental conditions, unwanted vibration of the system can be suppressed. The attained results of this study can be helpful in the vibration control of nanoscale actuators, switches, and resonators. © World Scientific Publishing Company.
الكلمات المفتاحية: axial and distributed tangential loads cancellation and maximum free response Critical moving force velocity dynamic amplification factor magneto-hygro-thermal loading nonlocality and strain gradient size dependency viscoelastic-Pasternak foundation
Mansir I.B.; Kumar Singh P.; Abed A.M.; Ameen H.F.M.; Anwar Khan S.; Yousuf Usmani A.; Ali R.; Elhosiny Ali H.; Algarni H.; Wae-hayee M.
Ain Shams Engineering Journal , Vol. 14 (12)
1 استشهاد Article Open Access English ISSN: 20904479
Department of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Centre for Energy Research and Training, Ahmadu Bello University, P.M.B 1045, Zaria, Nigeria; Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, U.P., Mathura, 281406, India; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Petroleum Engineering, College of Engineering, Knowledge University, Erbil, Iraq; Department of Mechanical Engineering, Zakir Husain College of Engineering and Technology, Aligarh Muslim University, UP, Aligarh, 202002, India; Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia; Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha 61413, P.O. Box 9004, Saudi Arabia; Physics Department, Faculty of Science, Zagazig University, Zagazig, 44519, Egypt; Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hatyai, Songkhla, 90110, Thailand
One of the best methods in thermal engineering for cooling a liquid is to use a radiator. Using the radiator mechanism in free convection systems is a successful and first idea to improve performance of natural convection systems, which have various applications in building, energy storage, and cooling systems. Therefore, a radiator with four constant temperature fins on each side was used to contribute to cool a hot plate in this study. The mechanism of this system was free convection of water with Multi-walled carbon nanotubes (MWCNTs), and a complex relationship was used for thermal conductivity nanofluid, respecting the thermal conductivity of MWCNT in radial and longitude directions. A deviated magnetic field also created a Lorentz force on the moving fluid to control natural convection mechanism. This system was modeled using the finite volume method to study the influences of Rayleigh number, volume fraction, and Hartmann number on the flow and heat transfer parameters. Evidences showed that injecting 3% volume fraction of MWCNT in Rayleigh numbers of 104 escalated the mean Nusselt number by 48% in all of the Hartmann numbers. © 2023 THE AUTHORS
الكلمات المفتاحية: Free convection Magnetohydrodynamic MWCNT Nanofluid Radiator
Tian M.-W.; Abed A.M.; Chauhan B.S.; Ghandour R.; Albani A.; Alkhalaf S.; Almujibah H.; El-Shorbagy M.A.; Ashraf I.M.
Case Studies in Thermal Engineering , Vol. 51
1 استشهاد Article Open Access English ISSN: 2214157X
School of Economics and Business Foreign Languages, Wuhan Technology and Business University, Wuhan, 430065, China; Air Conditioning and Refrigeration Techniques Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, UP, Mathura, India; College of Engineering and Technology, American University of the Middle East, Egaila, 54200, Kuwait; Faculty of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu, Terengganu, Kuala Nerus, 21030, Malaysia; Department of Computer, College of Science and Arts in Ar Rass, Qassim University, Qassim, Ar Rass, Saudi Arabia; Department of Civil Engineering, College of Engineering, Taif University, P.O. Box 11099, Taif City, 21974, Saudi Arabia; Department of Mathematics, College of Science and Humanities in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Department of Basic Engineering Science, Faculty of Engineering, Menoufia University, Shebin El-Kom, Egypt; Department of Physics, College of Science, King Khalid University, Saudi Arabia
As a nuclear power source, gas turbine modular helium reactors (GT-MHR) can play a major role in the energy industry due to their high safety index and low operating costs. In light of the GT-MHR's high heat capacity, this study integrates a GT-MHR cycle with a Stirling engine to achieve a high-efficiency electricity production framework in an eco-friendly framework. Multi-aspect study from energy, exergy, economic and exergoenvironmental viewpoints are conducted. Detailed heat exchanger modeling is performed to accurately evaluate the system's performance conditions as part of the design process. The outcomes of this study reveal that in the optimum operating mode, the turbine's inlet temperature and expansion ratio are 1300 K and 2, respectively. The compressor compression ratio is 2.1, the Stirling engine inlet temperature is 850.6 K, and the regenerative effectiveness is 0.866. Consequently, the system's total electricity becomes 325.57 MW with 54.26 % energetic and 75.13 % exergetic efficiencies. The economic assessment of the system reveals that the unit electricity product cost is 8.9 $/GJ, and the total investment cost is 12737 $/h. Also, the optimal exergoenvironmental results show an exergoenvironmental index of 0.237, an environmental damage effectiveness index of 0.0031, and an exergetic stability factor of 0.24. Compared to GT-MHR, GT-MHR/KC, GT-MHR/APC, and GT-MHR/ORC, the newly designed system produces 44.57, 21.47, 29.74, and 25.17 MW more electricity and is more energetically efficient by 28.3 %, 24.45 %, 25.8 %, and 25.07 %, respectively. © 2023
الكلمات المفتاحية: Energy efficiency Energy utilization Exergoeconomics Exergoenvironmental assessment GT-MHR Optimization
Abdalkareem Jasim S.; Ismailov B.; Jade Catalan Opulencia M.; Shafik S.S.; Kadhim M.M.; Lafta H.A.; Abed A.M.; Sivaraman R.; Sharma H.; Thaeer Hammid A.; Fakri Mustafa Y.
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , Vol. 237 (2), pp. 343-352
Article English ISSN: 14644207
Medical Laboratory Techniques Department, Al-maarif University College, Al-anbar-Ramadi, Iraq; Department of Physics Teaching Methods, Tashkent State Pedagogical University named after Nizami, Bunyodkor street 27, Tashkent, Uzbekistan; College of Business Administration, Ajman University, Ajman, United Arab Emirates; Experimental Nuclear Radiation Group, Scientific Research Center, Al-Ayen University, Thi-Qar, Iraq; Department of Dentistry, Kut University College, Kut, Wasit, 52001, Iraq; College of technical engineering, The Islamic University, Najaf, Iraq; Department of Pharmacy, Osol Aldeen University College, Baghdad, Iraq; Al-Nisour University College, Baghdad, Iraq; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Department of Mathematics, Dwaraka Doss Goverdhan Doss Vaishnav College, University of Madras, Chennai, India; Department of Computer Engineering and Applications, GLA University, Mathura, India; Computer Engineering Techniques Department, Faculty of Information Technology, Imam Ja’afar Al-Sadiq University, Baghdad, Iraq; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Mosul, Mosul, 41001, Iraq
Using notch geometry in the metallic glass (MG) samples, it is possible to improve the homogeneous plasticity and mechanical properties. In this work, the molecular dynamics (MD) simulation was performed to indicate how the alloying composition of MGs can tune the mechanical properties of notched samples. For this purpose, CuZr MGs were constructed through atomic-scale simulation with alloying compositions of Cu64Zr36, Cu60Zr40, Cu54Zr46, and Cu50Zr50, while a symmetrical surface notch was produced at the waistline of samples by removing certain atoms and relaxing the new free surfaces. The tensile loading was also carried out to characterize the plastic deformation and strength in the CuZr MGs. According to the results, Cu64Zr36 and Cu60Zr40 alloys exhibited a localized plastic deformation in the notch region, while the decrease in Cu content, i.e. Cu54Zr46, led to the generation of nanoscale shear events outside the notch region and extended the deformation area in the body of the sample. The results also indicated that the change in the mechanism of plastic deformation in the notched samples strongly depended on the type and population of polyhedrons rearranged in the backbone structure. Moreover, it was found that the Voronoi volume in the Cu54Zr46 alloy exhibited a gentle increment under the tensile loading in both the notched and un-notched regions, while the Cu-rich MGs, i.e. Cu64Zr36 and Cu60Zr40, showed a sudden increment of Voronoi volume at the center of the notch region, which was indicative of strain localization in the atomic system. © IMechE 2022.
الكلمات المفتاحية: Metallic glasses molecular dynamics notch effect plastic deformation
Jasim S.A.; Jabbar A.H.; Kadhim M.M.; Thangavelu L.; Abed A.M.; Mutlak D.A.; Hussein S.A.; Aravindhan S.; Mustafa Y.F.
Journal of Applied Research and Technology , Vol. 21 (4), pp. 707-712
Article English ISSN: 16656423
Al-Maarif University College, Medical Laboratory Techniques Department, Al-anbar-Ramadi, Iraq; Optical Department, College of Medical and Health Technology, Sawa University, Ministry of Higher Education and Scientific Research, Al-Muthanaa, Samawah, Iraq; Department of Dentistry, Kut University College, Wasit, Kut, 52001, Iraq; College of technical engineering, The Islamic University, Najaf, Iraq; Department of Pharmacy, Osol Aldeen University College, Baghdad, Iraq; Department of Pharmacology, Saveetha Dental College, Saveetha Institute of Medical and Technical Science, Saveetha University, Chennai, India; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Al-Nisour University College, Baghdad, Iraq; Al-Manara College for Medical Sciences, Maysan, Iraq; Department of Pharmacology, Saveetha dental College and hospital, Saveetha institute of medical and technical sciences, Chennai, India; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Mosul, Mosul, 41001, Iraq
In this study using accumulative press bonding (APB) process, bimetal AA1060 and AA5083 have been fabricated. The aluminum bars were first press bonded and then this process continued up to five pressing steps. In the APB process, the composite samples were preheated at 320°C for 7 min before each pressing step. Mechanical-properties-of the-AA1060-AA5083 composites were appraised in appraisal to AA1060-AA1060 and AA15083-AA5083 accumulative press bonded single alloy MMCs, and this is done for the first time as its novelty. It was found that both aluminum alloys deform in the same way in the AA1060-AA5083 composites-up-two-APB steps and then AA5083 layers began to neck. Also, it was found that the average strength of the AA1060-AA5083 composites is more than that of these-two-single-alloy MMCs. Moreover, by using-scanning-electron-microscopy (SEM), the effect of APB steps on the fracture surfaces of bi alloy composites have been investigated. © 2023 Universidad Nacional Autonoma de Mexico. All rights reserved.
الكلمات المفتاحية: Bi alloy matrix-composites (MMCs) Fractography Mechanical properties
Abderrahmane A.; Jamshed W.; Abed A.M.; Smaisim G.F.; Guedri K.; Devi S S.U.; Akbari O.A.; Younis O.; Baghaei S.
Case Studies in Thermal Engineering , Vol. 43
Erratum Open Access English ISSN: 2214157X
Laboratoire de Physique Quantique de La Matière et Modélisation Mathématique (LPQ3M), University of Mascara, Algeria; Department of Mathematics, Capital University of Science and Technology (CUST), Islamabad, 44000, Pakistan; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah, 21955, Saudi Arabia; Department of Mathematics, KPR Institute of Engineering and Technology, Coimbatore, 641407, India; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Mechanical Engineering, College of Engineering in Wadi Addwasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia
The authors regret < the correction of the word “Deanship” by the word “Deputyship” in the acknowledgement phrase. Therefore, the correct acknowledgments will be as follows: The authors extend their appreciation to the Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia for funding this research work through the project number: IFP22UQU4331317DSR151.>. The authors would like to apologise for any inconvenience caused. © 2023 The Author(s)
Al-Khaykan A.; Alrubaie A.J.; Abed A.M.; Kadhim S.A.; Alyasiri Y.I.
AIP Conference Proceedings , Vol. 2806 (1)
Conference paper English ISSN: 0094243X
Air Conditions and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hillah, Babil, 51001, Iraq; Medical instrumentation techniques engineering Department, Al-Mustaqbal University College, Hillah, Babil, 51001, Iraq; Biomedical engineering Department, Al-Mustaqbal University College, Hillah, Babil, 51001, Iraq
Due to its ease of control, the DC motor is a critical equipment in a wide variety of industrial applications that need changing speed and load parameters. Today's market is flooded with high-quality motor speed controllers. Their prices, on the other hand, are rather expensive. A low-cost, high-performance speed controller will be in high demand, particularly for small mobility applications. Three techniques for regulating the speed of a direct current motor are explained. The proposed system has several advantages, including a simple structure, low cost, accuracy, quiet efficiency, small volume, and bi-directional speed control. In the second method, a linear voltage regulator was used. The benefits of a linear voltage regulator include simplicity of design and ease of use, as well as protection from high power draw due to the nature of the load or a short circuit. The advantages of the push-pull amplifier in the third method are low distortion, the benefits include the absence of electromagnetic saturation in the coupling transformer core and the elimination of power supply waves, which results in the absence of hum, while the drawbacks include the need for two identical transistors and the usage of large, costly coupling transformers. In the third method, the amplifier's drive configuration advantages include little distortion, absence of electromagnetic saturation in the main coil of the connection, and termination of power supply ripples, which results in the absence of hum. Its disadvantages include the requirement for twin transistors that are similar and the use of coupling transformers that are large and pricey. © 2023 American Institute of Physics Inc.. All rights reserved.
الكلمات المفتاحية: Control DC motor motor speed controllers New methodology
Hasan H.A.; Abed A.M.; Sherza J.S.; Hilal A.H.; Ameen K.A.; Mohy R.J.; Abd L.A.; Sopian K.
AIP Conference Proceedings , Vol. 2591
Conference paper Open Access English ISSN: 0094243X
Department of Air Conditioning & Refrigeration Techniques, Al-Esra'a University College, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Solar Energy Research Institute, Universiti Kebangsaan Malaysia, Bangi, Selangor, 43600, Malaysia
This research shows how utilizing SiO2-H2O nanofluid to enhancing the heat transfer for Linear Fresnel Mirror collector (LFMC) with compound parabolic concentrator (CPC). The influence of the SiO2-H2O nanofluid on the improvement of heat transfer in the LFMC with CPC was tested investigated. The Finite Volume Method is used, energy equations with momentum equations were calculated. a different heat fluxes was subject on the upper wall of metal tube and bottom wall for LFMC system. A Reynolds number of 10,000 to 30,000 was used in this investigation. The results reveal that when the SiO2-H2O utilized increases, the Nusselt Numbers of the LFMC system improves. The Nusselt numbers grew significantly as high valve of Reynolds numbers is applying, also can be observed from the findings. Pure water is followed by SiO2-H2O nanofluid, which has the greatest Nusselt Numbers value. The findings reveal that The Nusselt numbers rises as the SiO2 nanoparticle diameter decreasing and as the SiO2 nanoparticle (concentration) increasing. © 2023 Author(s).
الكلمات المفتاحية: Compound Parabolic Concentrator (CPC) Heat Transfer Augmentation LFMC System SiO2 Nanoparticle SiO2-H2O Nanofluid Solar System.
Majdi H.S.; Habeeb L.J.; Abed A.M.
AIP Conference Proceedings , Vol. 2776
Conference paper Open Access English ISSN: 0094243X
Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Hillah, Babil, 51001, Iraq; Training and Workshop Center, University of Technology, Baghdad, 10001, Iraq; Department of Air Conditioning and Refrigeration Techniques Engineering, Al-Mustaqbal University College, Hillah, Babil, 51001, Iraq
Thermal managing is necessary for electronics products. The study of the computational fluid dynamics of the heat sink for thermal management is explained. This article focuses on the numerical investigation of temperature distribution (thermal steady-state) and static structural in central processing units (CPU) case with different types of the chemical material which is fix processor to fins. Three forms (cross, dot, and fully) of various materials have been studied. The materials tested in this work are (TG-S808 Thermal grease, TG-N909 Non-silicone, S606B thermal grease, and S606C thermal grease). The thermal and structural analyses are applied with a commercial package providing via ANSYS Fluent. The results show S606B material and dot form are the best choices to produce quick heat transfer and less deformation and stress of the fins. The difference of temperature distribution in the case of steady state thermal at dot form is better than the two others (cross and fully). The temperature at the cross form and S606B dropped from 71.427 to 67.858 degrees Celsius. At the same shape and time interval, material S606B exhibited the least deformation matching to the other materials. Using N909 material in dot form for 1 hour of PC operation results in less deformation than using the same material in full and cross form. S606B has been demonstrated to be the best material for reducing stress in all kinds. © 2023 Author(s).
الكلمات المفتاحية: CPU fix material heat sink fins heat transfer augmentation interaction optimum fix
2022
76 بحث
Min J.; Yan G.; Abed A.M.; Elattar S.; Amine Khadimallah M.; Jan A.; Elhosiny Ali H.
Fuel , Vol. 326
187 استشهاد Article English ISSN: 00162361
School of Civil Engineering, Chongqing Vocational Institute of Engineering, Chongqing, 402260, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Industrial & Systems Engineering, College of Engineering, Princess Nourah bint Abdulrahman University, P.O.Box 84428, Riyadh, 11671, Saudi Arabia; Prince Sattam Bin Abdulaziz University, College of Engineering, Civil Engineering Department, Al-Kharj, 16273, Saudi Arabia; Laboratory of Systems and Applied Mechanics, Polytechnic School of Tunisia, University of Carthage, Tunis, Tunisia; Faculty of hospitality tourism and wellness, Universiti Malaysia Kelantan, City Campus 16100, Kota Bharu, Malaysia; Advanced Functional Materials & Optoelectronic Laboratory (AFMOL), Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia; Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha 61413, P.O. Box 9004, Saudi Arabia; Physics Department, Faculty of Science, Zagazig University, Zagazig, 44519, Egypt
During this anthropocentric period, sustainable energy supply and climate changing could be a main source of problem for human being. Scientists believe that the ratio of climate changing and global warming is linked to the increase in greenhouse gas increment due to fossil fuels, particularly CO2. According to studies, the building sector is a main source of carbon dioxide (CO2) emissions into the atmosphere. Building construction, operation, and the use of unclean energy sources have led in a significant quantity of CO2 being emitted into the environment. As research progresses toward zero-energy buildings and usage of sustainable clean energy, it is critical to reduce a building's total energy consumption and environmental effect throughout its existence. Total energy is made up of operational and embodied energy, the latter of which is linked to embodied CO2 (ECO2) emissions that relates to the greenhouse effect. CO2 is calculated by multiplying the mass of the materials by the CO2 coefficients (kg CO2/kg). The findings give useful baseline metrics for each material's contribution in case of mass and ECO2. It was determined that this method could save a significant amount of energy, CO2, and power. The major benefits were identified to include greater building performance, a rapid and sustainable design processing, increased energy efficiency and the supply of superior design choices. © 2022
الكلمات المفتاحية: Carbon dioxide Climate Emissions Sustainable energy
Mourad A.; Aissa A.; Abed A.M.; Smaisim G.F.; Toghraie D.; Fazilati M.A.; Younis O.; Guedri K.; Alizadeh A.
Journal of Energy Storage , Vol. 55
71 استشهاد Article English ISSN: 2352152X
Laboratoire de Physique Quantique de la Matière et Modélisation Mathématique (LPQ3M), University of Mustapha Stambouli of Mascara, Mascara, Algeria; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Department of Mechanical Engineering, Islamic Azad University, Khomeinishahr Branch, Khomeinishahr, Iran; Department of Mechanical Engineering, College of Engineering in Wadi Addwasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Department of Mechanical Engineering, Faculty of Engineering, University of Khartoum, Sudan; Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah, 21955, Saudi Arabia; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq
Thermal energy storage plays a major role in applying thermal energy sources such as waste heat and solar energy. As an efficient storage technique, the development of latent heat storage systems is a key factor for the successful application of thermal energy. This work presents thermal characteristics of a shell-and-tube phase change material (PCM) latent energy storage system with shell and tube forms of octagonal and three-lobe, respectively. The nano-enhanced paraffin wax was employed PCM, and the transient performance of the system was examined using the enthalpy-porosity method. The PCM temperature, melted fraction, and the Nusselt and Bejan numbers were adopted as system evaluation indexes, and sensitivity analysis was made to unveil the effect of copper nanoparticle (NP) concentration, the tube orientation angle and the eccentricity on system performance. The obtained results demonstrate that between the studied parameters, altering the eccentricity has the most effect on system characteristics; in the case of the above-located tube (denoted by case1), the melting time was reduced by 62 % compared to the base case. Changing the tube inclination angle and NP concentration does not show a significant effect on profiles of PCM temperature and melted fraction and mainly affect the Be number; using the case of 60° tube inclination angle and NP concentration of 4 % shows a slight improvement of temperature and melted fraction and reduces the average Be number. © 2022 Elsevier Ltd
الكلمات المفتاحية: Bejan number Latent heat storage shell and tube Nanoparticle Octagonal shaped shell Tube eccentricity Tube inclination angle
Ruhani B.; Andani M.T.; Abed A.M.; Sina N.; Smaisim G.F.; Hadrawi S.K.; Toghraie D.
Heliyon , Vol. 8 (11)
71 استشهاد Article Open Access English ISSN: 24058440
Solar Energy Naqsh-e Jahan Company, Chahar Bagh St, Isfahan, Iran; Department of Material Science Engineering, Isfahan University of Technology, Isfahan, Iran; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
In this paper, the thermal conductivity (knf) of cerium oxide/ethylene glycol nanofluid is extracted for different temperatures (T = 25, 30, 35, 40, 45, and 50 °C) and the volume fraction of nanoparticles (φ= 0, 0.25, 0.5, 0.75, 1, 1.5, 2 and 2.5%) and then knf is predicted by two methods including Artificial Neural Network (ANN) and fitting method. For both methods, the results have been presented and compared. The experiments showed that with increasing φ and temperature, the thermal conductivity ratio (TCR) of nanofluid increases. It was also observed that when the experiments are performed at high temperatures, the rate of increase in knf is much higher than the change in the same amount of φ change at low temperatures. An ANN with 7 neurons has a correlation coefficient very close to 1 and this proves that the outputs are compatible with experimental results. Also, it can be seen that the ANN could predict the thermal behavior of cerium oxide/ethylene glycol nanofluid more accurately. © 2022 The Author(s)
الكلمات المفتاحية: Artificial Neural Network (ANN) Cerium oxide Ethylene glycol Nanofluid Thermal conductivity
Hai T.; Abidi A.; Wang L.; Abed A.M.; Z. Mahmoud M.; M. Tag El Din E.; Smaisim G.F.
Journal of Building Engineering , Vol. 58
63 استشهاد Article English ISSN: 23527102
Qiannan Normal University for Nationalities, Guizhou, Duyun, 558000, China; Key Laboratory of Complex Systems and Intelligent Optimization of Guizhou, 558000, China; Institute for Big Data Analytics and Artificial Intelligence (IBDAAI), Universiti Teknologi MARA, Selangor, Shah Alam, 40450, Malaysia; Physics Department, College of Sciences Abha, King Khalid University, Saudi Arabia; Research Laboratory of Metrology and Energetic Systems, National Engineering School, Energy Engineering Department, Monastir University, Monastir City, Tunisia; Higher School of Sciences and Technology of Hammam Sousse, Sousse University, Tunisia; School of Computer Science and Engineering, Xi’ an University of Technology, Xi’ An, 710048, China; The Key Laboratory of Industrial Automation of Shaanxi Province, Shaanxi University of Technology, Hanzhong, 723001, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hilla, Iraq; Department of Radiology and Medical Imaging, College of Applied Medical Sciences in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Faculty of Health, University of Canberra, Canberra, ACT, Australia; Electrical Engineering Department, Faculty of Engineering & Technology, Future University in Egypt New Cairo, 11835, Egypt; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq
The present study simulates a solar thermal panel using the finite element method (FEM) in COMSOL Multiphysics. A cropper pipe of a water-Al2O3 nanofluid flow was used under a solar panel. A number of elliptic fins were attached to the pipe. The fins were holed and configured in three models. The system of the pipe and fins was placed in a chamber filled with CaCl2.6H2O as a phase change material (PCM) under the panel. The proposed solar system was used on a pitched roof to partially supply the energy demand of the Boarding clinic. The energy calculations were carried out in Design Builder. It was found that PCM began to melt at t=40 min. The fins with a central hole led to 10.4% higher melted PCM than double-hole fins at t=100 min. The centrally-holed fins minimized the output flow temperature. However, they also minimized the PVT temperature. It was also found that the proposed system could supply 9.11% of the heating demand of the building in the coldest month of the year. In hot months, however, up to 33.3% of the energy required to heat water could be supplied by the PVT + PCM system. © 2022 Elsevier Ltd
الكلمات المفتاحية: Building Nanofluid olar PCM PVT
Najim F.T.; Kaplan S.; Mohammed H.I.; Dulaimi A.; Abed A.M.; Ibrahem R.K.; Al-Qrimli F.A.; Mahmoud M.Z.; Awrejcewicz J.; Pawłowski W.
Sustainability (Switzerland) , Vol. 14 (17)
55 استشهاد Article Open Access English ISSN: 20711050
Electrical Engineering Department, Al-Iraqia University, Baghdad, 10071, Iraq; Department of Mechanical Engineering, Ege University, Izmir, 35100, Turkey; Department of Physics, College of Education, University of Garmian, Kurdistan, Kalar, 46021, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Medical Instrumentation Engineering Techniques, Al-Farahidi University, Baghdad, 10015, Iraq; College of Engineering, Uruk University, Baghdad, 10069, Iraq; Department of Radiology and Medical Imaging, College of Applied Medical Sciences, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia; Faculty of Health, University of Canberra, Canberra, ACT 2600, Australia; Department of Automation, Biomechanics and Mechatronics, Lodz University of Technology, Lodz, 90-537, Poland; Institute of Machine Tools and Production Engineering, Lodz University of Technology, Lodz, 90-537, Poland
In this research, a numerical analysis is accomplished aiming to investigate the effects of adding a new design fins arrangement to a vertical triplex tube latent heat storage system during the melting mechanism and evaluate the natural convection effect using Ansys Fluent software. In the triplex tube, phase change material (PCM) is included in the middle tube, while the heat transfer fluid (HTF) flows through the interior and exterior pipes. The proposed fins are triangular fins attached to the pipe inside the PCM domain in two different ways: (1) the base of the triangular fins is connected to the pipe, (2) the tip of the triangular fins is attached to the pipe and the base part is directed to the PCM domain. The height of the fins is calculated to have a volume equal to that of the uniform rectangular fins. Three different cases are considered as the final evaluation toward the best case as follows: (1) the uniform fin case (case 3), (2) the reverse triangular fin case with a constant base (case 12), (3) the reverse triangular fin case with a constant height (case 13). The numerical results show that the total melting times for cases 3 and 12 increase by 4.0 and 10.1%, respectively, compared with that for case 13. Since the PCM at the bottom of the heat storage unit melts slower due to the natural convection effect, a flat fin is added to the bottom of the heat storage unit for the best case compared with the uniform fin cases. Furthermore, the heat storage rates for cases 3 and 12 are reduced by 4.5 and 8.5%, respectively, compared with that for case 13, which is selected as the best case due to having the lowest melting time (1978s) and the highest heat storage rate (81.5 W). The general outcome of this research reveals that utilizing the tringle fins enhances the thermal performance and the phase change rate. © 2022 by the authors.
الكلمات المفتاحية: heat transfer enhancement phase change process thermal energy storage triangular fin vertical heat exchanger
Smaisim G.F.; Al-Madhhachi H.; Abed A.M.
Case Studies in Thermal Engineering , Vol. 37
53 استشهاد Article Open Access English ISSN: 2214157X
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, 54001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
The production of electric vehicles and their accessories is grooming day by day in the automotive industry. The heart of these electric vehicles is the power source, which is known as batteries. The capacity and performance of such batteries demand a high rating, due to the customer's need and improved vehicle features. Unfortunately, the batteries are facing thermal failures caused by the poor thermal management approach. Li-ion batteries are the most familiar ones which have a very high energy density compared to others. But, these batteries lead to the breakdown of ions and lithium plating because of the fluctuation in temperature distribution and fast charging characteristics. The temperature distribution varies with respect to loading and application. However, this process is accompanied by thermal runaway, which may result in the fatal destruction of batteries. To overcome such issues, the present work selected looped heat pipes (LHP) as a device to transfer the excessive temperature on batteries using nanofluids. Water, Ethylene glycol and acetone were selected as working fluids along with graphene oxide (GO) Nanoparticles. The experiment is conducted for a constant heat input of 30W and various filling ratios (20%, 35%, 50%, 65%). Stability, thermal conductivity, thermal resistance and temperature distributions are discussed. The experiment results are validated with Computational fluid dynamics. © 2022 The Author(s).
الكلمات المفتاحية: CFD Cooling system Heat pipe Li-ion battery Nanofluids
Abed A.M.; Mouziraji H.R.; Bakhshi J.; Dulaimi A.; Mohammed H.I.; Ibrahem R.K.; Ben Khedher N.; Yaïci W.; Mahdi J.M.
Frontiers in Chemistry , Vol. 10
52 استشهاد Article Open Access English ISSN: 22962646
Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran; College of Engineering, University of Warith Al-Anbiyaa, Karbala, Iraq; Department of Physics, College of Education, University of Garmian, Kurdistan, Iraq; Department of Medical Instrumentation Engineering Techniques, Al-Farahidi University, Baghdad, Iraq; Department of Mechanical Engineering, College of Engineering, University of Ha’il, Ha’il, Saudi Arabia; Laboratory of Thermal and Energetic Systems Studies (LESTE) at the National School of Engineering of Monastir, University of Monastir, Monastir, Tunisia; CanmetENERGY Research Centre, Natural Resources Canada, Ottawa, ON, Canada; Department of Energy Engineering, University of Baghdad, Baghdad, Iraq
This study numerically intends to evaluate the effects of arc-shaped fins on the melting capability of a triplex-tube confinement system filled with phase-change materials (PCMs). In contrast to situations with no fins, where PCM exhibits relatively poor heat response, in this study, the thermal performance is modified using novel arc-shaped fins with various circular angles and orientations compared with traditional rectangular fins. Several inline and staggered layouts are also assessed to maximize the fin’s efficacy. The effect of the nearby natural convection is further investigated by adding a fin to the bottom of the heat-storage domain. Additionally, the Reynolds number and temperature of the heat-transfer fluid (HTF) are evaluated. The outcomes showed that the arc-shaped fins could greatly enhance the PCMs’ melting rate and the associated heat-storage properties. The melting rate is 17% and 93.1% greater for the case fitted with an inline distribution of the fins with a circular angle of 90° and an upward direction, respectively, than the cases with uniform rectangular fins and no fins, which corresponded to the shorter melting time of 14.5% and 50.4%. For the case with arc-shaped fins with a 90° circular angle, the melting rate increases by 9% using a staggered distribution. Compared to the staggered fin distribution, adding an extra fin to the bottom of the domain indicates adverse effects. The charging time reduces by 5.8% and 9.2% when the Reynolds number (Re) rises from 500 to 1000 and 1500, respectively, while the heat-storage rate increases by 6.3% and 10.3%. When the fluid inlet temperature is 55°C or 50°C, compared with 45°C, the overall charging time increases by 98% and 47%, respectively. Copyright © 2022 Abed, Mouziraji, Bakhshi, Dulaimi, Mohammed, Ibrahem, Ben Khedher, Yaïci and Mahdi.
الكلمات المفتاحية: arc-shaped fins energy efficiency heat transfer enhancement latent heat storage phase change materials
Abderrahmane A.; Jamshed W.; Abed A.M.; Smaisim G.F.; Guedri K.; Devi S.U.; Akbari O.A.; Younis O.; Baghaei S.
Case Studies in Thermal Engineering , Vol. 40
50 استشهاد Article Open Access English ISSN: 2214157X
Laboratoire de Physique Quantique de la Matiere et Modelisation Mathematique (LPQ3M), University of Mascara, Algeria; Department of Mathematics, Capital University of Science and Technology (CUST), Islamabad, 44000, Pakistan; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah, 21955, Saudi Arabia; Department of Mathematics, Kpr Institute of Engineering and Technology, Coimbatore, 641407, India; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Mechanical Engineering, College of Engineering in Wadi Addwasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia
Non-Newtonian fluids are encountered in many engineering applications, such as the petroleum industry and lubrication. In this investigation, the Magnetohydrodynamic (MHD) and convective boundary (heater) are assumed to analyze the heat transport phenomena of non-Newtonian type Carboxy-Methyl-Cellulose (CMC)/Aluminum oxide (Al2O3) hybrid nanofluid in an annulus enclosure. A porous medium saturates the enclosure under the privileges of Darcy-Brinkman law. Galerkin Finite Element Method (GFEM) is employed for numerical findings. Power-law type non-Newtonian-nanofluid is investigated for different volume fractions (φ) in an aqueous solution of CMC. The flow and the thermal behavior of the nanofluid are investigated for dissimilar values of Rayleigh (Ra), Hartman (Ha), and Darcy (Da) numbers and power-law index (n). The average Nusselt (Nuavg) and Bejan (Beavg) numbers were evaluated for the nanofluid flow. The results indicate that the present composition of nanofluid enhances the heat transfer inside the enclosure. This effect can be further improved by increasing Ra and Da numbers or decreasing the power-law index or magnetic forces. The Da number and power-law index are excellent control parameters for entropy generation. Overall, these results offer a good lead into the design and optimization of thermal performance within an annulus enclosure inundated by a Darcy medium. On the other hand, the outcomes also indicate that, at Ra = 1000, owing to the limited drive of fluid flow inside the cavity, the conduction heat flux is predominant, and the upsurge of the parameter n hasn't a significant effect on Nuavg variations. At the highest Ra, increasing n, and Ha, reduced Nuavg by 50% and 40%, respectively. While increasing, Da improved Nuavg by 245%. © 2022 The Author(s).
الكلمات المفتاحية: Annulus Entropy generation Galerkin finite element technique Heat transfer enhancement Porous media Power-law nanofluids
Hai T.; Abidi A.; Abed A.M.; Zhou J.; Malekshah E.H.; Aybar H.Ş.
Journal of Power Sources , Vol. 550
46 استشهاد Article English ISSN: 03787753
School of Computer and Information, Qiannan Normal University for Nationalities, Guizhou, Duyun, 558000, China; Key Laboratory of Complex Systems and Intelligent Optimization of Guizhou, Guizhou, Duyun, 558000, China; Institute for Big Data Analytics and Artificial Intelligence (IBDAAI), Universiti Teknologi MARA, Selangor, Shah Alam, 40450, Malaysia; Physics Department, College of Sciences Abha, King Khalid University, Saudi Arabia; Research Laboratory of Metrology and Energetic Systems, National Engineering School, Energy Engineering Department, Monastir University, Monastir City, Tunisia; Higher School of Sciences and Technology of Hammam Sousse, Sousse University, Tunisia; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hilla, Iraq; Department of Power Engineering and Turbomachinery, Silesian University of Technology, Gliwice, 44-100, Poland; Department of Mechanical Engineering, Eastern Mediterranean University, TRNC, via Mersin 10, Turkey; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan
In this paper, a 3D battery pack (B-PK) containing 16 battery cells (BCL) with aligned and non-aligned arrangements is simulated. The batteries are 18,650 lithium-ion cylindrical ones. The B-PK is placed in a square air duct. Air enters from the top of the B-PK and exits from the bottom of the batteries. This study is performed by changing the inlet air velocity (V-AR) to the B-PK from 0.03 to 0.09 m/s for three charging and discharging cycles within 2000 s. The findings revealed that extending the duration and charging and discharging of the B-PK up to the third cycle increased the temperature of B-PK. The effect of V-AR changes is more pronounced in the second and especially the third cycles of battery charging process. The maximum (T-MX) and average (T-AV) temperatures of the B-PK as well as the temperature of air leaving the B-PK are all reduced when the V-AR is increased. The central batteries of the B-PK have a high temperature, whereas the batteries at the B-PK corners have a low temperature, according to an analysis of BCLs. Using an aligned arrangement of batteries in the pack reduces the T-AV of B-PK compared to the non-aligned arrangement of batteries. © 2022 Elsevier B.V.
الكلمات المفتاحية: Air-cooled Battery pack Charging and discharging processes Cooling system
Jiang Y.; Smaisim G.F.; Mahmoud M.Z.; Li Z.; Aybar H.Ş.; Abed A.M.
Journal of Power Sources , Vol. 541
46 استشهاد Article English ISSN: 03787753
School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao, 266520, China; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Radiology and Medical Imaging Department, College of Applied Medical Sciences, Prince Sattam bin Abdulaziz University, Al-Kharj, Saudi Arabia; Faculty of Health, University of Canberra, ACT, Canberra, Australia; Faculty of Mechanical Engineering, Opole University of Technology, Opole, 45758, Poland; Yonsei Frontier Lab, Yonsei University, Seoul, 03722, South Korea; Department of Mechanical Engineering, Eastern Mediterranean University, TRNC, via Mersin 10, Turkey; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hilla, Iraq
This paper numerically investigates cooling of a cubic pack of nine cylindrical type lithium-ion batteries. The pack is first equipped with three separate ducts to convey alumina (Al2O3)/water nanofluids (NFs), and all the assembly of battery cells and ducts are then dipped in a phase-change material (PCM). Simulations are carried out to investigate the effects of parameters including the volume fraction of nanoparticles (NPs) and the height of the ducts. The study is transiently performed in the time course of 0–60000 s to scrutinize the temperature of batteries and the nanofluid, the volume of molten PCM, and the heat transfer coefficient (U-value) in both PCM and nanofluid. Within the time courses studied, a maximum of 67.5% of PCM is transformed into the liquid. An increase in the height of the ducts diminishes the maximum temperature and the average temperature of the battery cells and inflated the temperature of the output nanofluid. The maximum heat transfer coefficient in the nanofluid is observed at the 20 mm height at 47th min, followed by the 12 mm height of the ducts. A raise in the duct height increases the U-value in the PCM in a continuous manner. © 2022 Elsevier B.V.
الكلمات المفتاحية: Active cooling method Lithium-ion batteries Nanoparticles Passive cooling method Rectangular duct
Smaisim G.F.; Prabu N.M.; A P S.; Abed A.M.
Case Studies in Thermal Engineering , Vol. 35
43 استشهاد Article Open Access English ISSN: 2214157X
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Department of Mechanical Engineering, Mahaguru Institute of Technology, India; Department of Mechanical Engineering, P S G College of Technology, India; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq
The current work describes the synthesis of Nano magnetic catalysts, oil extraction from fish waste and processing of biodiesel. The first-order thermodynamic equations are considered to determine its kinetic and thermodynamic parameters involved in extraction process. The study has considered the rate constant (k), activation energy (Ea), frequency factor (A), entropy (ΔS), enthalpy (ΔH), and Gibb's free energy (ΔG) as variables at different temperatures. The maximum activation energy, rate constant, enthalpy and entropy are 59.31 kJ mol-1, 27.15 s-1, 65.87kJmol-1 and 27.63kJmol-1k-1 respectively. The important parameters affecting the process of biodiesel production is reaction temperature and catalyst concentration. Here, the nano magnetic catalysts accelerate the production of biodiesel from fish waste. So, the biodiesel yield is high at 55 °C reaction temperature (95 wt%) than 32 °C reaction temperature (65 wt%). The resulting biodiesel was tested according to ASTM standards and obtained the closer values as per ASTM D6751 specification. © 2022 The Authors.
الكلمات المفتاحية: Biofuel Fish oil Kinetics Nano magnetic catalyst Thermodynamics properties
Wang S.; Lin H.; Abed A.M.; Sharma A.; Fooladi H.
International Journal of Hydrogen Energy , Vol. 47 (79), pp. 33699-33718
43 استشهاد Article English ISSN: 03603199
Yuxi Normal University, Yunnan Province, ZIP 653100, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University Mathura, India; Department of Energy Engineering, Tabriz Branch, Islamic Azad University, Tabriz, Iran
Since biomass resources can be found with different contents in most regions of the world, biomass/gasification (Biog) coupling processes can be considered as an attractive and useful technology for integrating in polygeneration configurations. In this regard, a new polygeneration energy configuration based on Biog process is proposed and its conceptual analysis is presented. In the new energy process, a Rankine cycle, a water electrolysis cycle (based on solid oxide electrolyzer, SOE), and a multi-effect desalination (MED) unit are embedded to generate electricity, hydrogen fuel, and freshwater, respectively. The considered polygeneration configuration is comprehensively investigated and discussed utilizing a parametric evaluation and from thermodynamic, energetic and exergoeconomic points of view. Relying on the proposed system can provide a new approach to produce carbon-free hydrogen fuel and freshwater in order to achieve an efficient, modern and green polygeneration configuration. The results indicated that the electrical power generated by the considered polygeneration configuration is close to 1735 kW. In addition, the system is capable of producing almost 9880 kg/h of freshwater and 12.3 kg/h of hydrogen. In such a context, the energy efficiency and total products unit exergy cost were 36.4% and 16.6 USD/GJ, respectively. Also, the system could achieve an exergy efficiency of nearly 17.1%. Moreover, about 8.9 MW of process's exergy is destroyed. The performance of the proposed polygeneration configuration using four different biomass fuels is compared. It was determined that the total products unit exergy costs under paddy husk and paper biomass are approximately 14.8% and 8.6% higher than MSW, respectively. © 2022 Hydrogen Energy Publications LLC
الكلمات المفتاحية: Biomass/gasification Electrolyzer Exergoeconomic Polygeneration cycle Steam turbine Thermal desalination process
Abdulhussein W.A.; Abed A.M.; Mohammed D.B.; Smaisim G.F.; Baghaei S.
Case Studies in Thermal Engineering , Vol. 35
41 استشهاد Article Open Access English ISSN: 2214157X
Ministry of Education, General Directorate for Vocational Education, Baghdad, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq; Department of Laser and Optical Electronics Engineering, Kut University College, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Department of Mechanical Engineering, Islamic Azad University, Khomeinishahr Branch, Khomeinishahr, Iran
The microfluidic systems' thermal performance in various industries is affected by the fluid flow within their micro/nanochannels. This study aimed to investigate the boiling process of samples simulated in micro/nanochannel by molecular dynamics simulation. In the present study, the boiling time inside the micro/nanochannel is investigated at different types of base fluid (Helium, oxygen (air), and water), different types of channels walls particles (copper, platinum, and copper/platinum), number of atomic curvatures (1, 2, and 3), external electric field (1, 2, and 5 V/m), and external magnetic fields (1, 2, and 5 T). Numerically, the phase change rate in Helium base fluid samples is higher than other fluids. Its boiling time in micro/nanochannels was 3.88 and 3.54 ns, respectively. This indicates an increase in these structures' efficiency in constructing heat transfer processes. In addition, the boiling time of the base fluid in the platinum atomic micro/nanochannels occurs in a shorter time of 3.61 and 3.52 ns. By increasing the number of curves from 1 to 3 complete curvatures, the micro/nanochannel's boiling time decreases from 3.88/3.54 to 3.07/2.89 ns. Also, by increasing the intensity of the external electric field from 0 to 5 V/m, the boiling time in the micro/nanochannel decreases from 3.88/3.84 ns to 3.21/3.16 ns. Finally, increasing the intensity of the external magnetic field from 0 to 5 T leads to a decrease in boiling time in the micro/nanochannel to 3.10/3.02 ns. This phenomenon indicates an increase in mobility and kinetic energy of the base fluid by applying the external field. © 2022 The Authors.
الكلمات المفتاحية: Boiling process External field Micro/nanochannel Molecular dynamics simulation
Hasan H.A.; Sherza J.S.; Mahdi J.M.; Togun H.; Abed A.M.; Ibrahim R.K.; Yaïci W.
Sustainability (Switzerland) , Vol. 14 (16)
41 استشهاد Article Open Access English ISSN: 20711050
Department of Air Conditioning Refrigeration Techniques, Al-Esra’a University College, Baghdad, 10068, Iraq; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq; Department of Biomedical Engineering, University of Thi-Qar, Nassiriya, 64001, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Medical Instrumentation Engineering, Al-Farahidi University, Baghdad, 10015, Iraq; CanmetENERGY Research Centre, Natural Resources Canada, 1 Haanel Drive, Ottawa, K1A 1M1, ON, Canada
A design for a photovoltaic-thermal (PVT) assembly with a water-cooled heat sink was planned, constructed, and experimentally evaluated in the climatic conditions of the southern region of Iraq during the summertime. The water-cooled heat sink was applied to thermally manage the PV cells, in order to boost the electrical output of the PVT system. A set of temperature sensors was installed to monitor the water intake, exit, and cell temperatures. The climatic parameters including the wind velocity, atmospheric pressure, and solar irradiation were also monitored on a daily basis. The effects of solar irradiation on the average PV temperature, electrical power, and overall electrical-thermal efficiency were investigated. The findings indicate that the PV temperature would increase from 65 to 73 °C, when the solar irradiation increases from 500 to 960 W/m2, with and without cooling, respectively. Meanwhile, the output power increased from 35 to 55 W when the solar irradiation increased from 500 to 960 W/m2 during the daytime. The impact of varying the mass flow rate of cooling water in the range of 4 to 16 L/min was also examined, and it was found that the cell temperature declines as the water flow increases in intensity throughout the daytime. The maximum cell temperature recorded for PV modules without cooling was in the middle of the day. The lowest cell temperature was also recorded in the middle of the day for a PVT solar system with 16 L/min of cooling water. © 2022 by the authors.
الكلمات المفتاحية: electrical efficiency heat transfer photovoltaic-thermal PVT solar system thermal efficiency water-cooled heat sink
Sun W.; Feng L.; Abed A.M.; Sharma A.; Arsalanloo A.
Energy , Vol. 260
38 استشهاد Article English ISSN: 03605442
School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou, 215009, China; National & Local Joint Engineering Laboratory for Municipal Sewage Resource Utilization Technology, Suzhou University of Science and Technology, China; School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou, 510006, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Mathura, India; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam
In this research, a non-dimension model of renewable generation system encompassing a solar-geothermal driven Proton Exchange Membrane (PEM) electrolyzer in integration with Kalina cycle (KC), Single-effect Absorption Refrigeration Cycle (SEAC), and Reverse Osmosis (RO) unit is introduced. Cooling and heating loads, electricity, distilled water, Hydrogen, Oxygen, and dry air are the main products of the mentioned system. This scheme is investigated from the energetic, exergetic, and exergoeconomic (3E) standpoints by writing a code in engineering equation solver (EES) and is totally validated by the literature survey. Subsequently, to enhance the operating condition of the CCHP system devised, six decision variables are designated for the optimization procedure using the RSM via the Minitab software; the response variables are sum unit cost of products (SUCP) and exergetic efficiency. Here, the desirability of the accuracy of the regression models attained from the analysis of variance for the objective functions is entirely verified. Moreover, the optimal condition reveals the best exergetic efficiency and SUCP of 31.71% and 1.75 $/GJ, respectively. © 2022
الكلمات المفتاحية: Kalina cycle Multi-generation system Multi-objective optimization Response surface methodology (RSM) Solar-geothermal driven RO-PEM
Fayad M.A.; Abed A.M.; Omran S.H.; Jaber A.A.; Radhi A.A.; Dhahad H.A.; Chaichan M.T.; Yusaf T.
International Journal of Renewable Energy Development , Vol. 11 (4), pp. 1068-1077
38 استشهاد Article Open Access English ISSN: 22524940
Energy and Renewable Energies Technology Center, University of Technology-Iraq, Baghdad, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Mechanical Engineering Department, University of Technology-Iraq, Baghdad, Iraq; School of Engineering and Technology, Central Queensland University, Brisbane, 4008, QLD, Australia
The fuel combustion in diesel engines can be improved by adding nanomaterials to the fuel which result in an reduction in pollutant emissions and enhance the quality of fuel combustion. The engine performance and soot nanoparticles characteristics were evaluated in this study with adding nanoparticles of copper oxide (CuO2) to the rapeseed methyl ester (RME) and diesel under variable engine speeds. The addition of CuO2 to the RME significantly improve brake thermal efficiency (BTE) and decline the brake specific fuel consumption (BSFC) by 23.6% and 7.6%, respectively, compared to the neat RME and diesel fuel. The inclusion CuO2 nanoparticles into the RME and diesel led to decrease the concentration and number of particulate matter (PM) by 33% and 17% in comparison with neat RME and diesel without nano additives, respectively. Moreover, PM is significantly decreased by 31.5% during the RME combustion in comparison with neat RME and diesel under various engine speeds. It was also obtained that the number of emitted particles (npo) reduced by 23.5% with adding nanoparticles to the RME in comparison with diesel, while the diameter of soot nanoparticles (dpo) increased by 8.6% in comparison with diesel. Furthermore, the addition CuO2 to the RME decreased the size and number of particles more than to the diesel fuel. © 2022. The Author(s).
الكلمات المفتاحية: BSFC BTE Engine speed Particulate matter Renewable fuels Soot particles
Younis O.; Mourad A.; Aissa A.; Qasem N.A.A.; Abed A.M.; Akbari O.A.; Smaisim G.F.; Gudri K.; Toghraie D.; Kolsi L.; Alizadeh A.
Journal of Energy Storage , Vol. 56
37 استشهاد Article English ISSN: 2352152X
Department of Mechanical Engineering, College of Engineering in Wadi Addwasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Laboratoire de Physique Quantique de la Matière et Modélisation Mathématique (LPQ3M), University of Mustapha Stambouli of Mascara, Mascara, Algeria; Department of Aerospace Engineering and Interdisciplinary Research Center for Membranes and Water Security, King Fahd University of Petroleum & Minerals (KFUPM), Dhahran, 31261, Saudi Arabia; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Young Researchers and Elite Club, Islamic Azad University, Khomeinishahr Branch, Khomeinishahr, Iran; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, P.O. Box 5555, Makkah, 21955, Saudi Arabia; Department of Mechanical Engineering, Islamic Azad University, Khomeinishahr Branch, Khomeinishahr, Iran; Department of Mechanical Engineering, College of Engineering, University of Ha'il, Ha'il City, 81451, Saudi Arabia; Laboratory of Metrology and Energy Systems, Department of Energy Engineering, University of Monastir, Monastir, 5000, Tunisia; Department of Civil Engineering, College of Engineering, Cihan University-Erbil, Erbil, Iraq
The melting of nano-enhanced phase change material (NEPCM) in a latent heat thermal storage system is investigated for PCM loaded within an annulus between an outer wavy cylinder and an inner Koch snowflake cylinder. The inner Koch snowflake cylinder is used in this study to increase the heating surface area and enhance the NEPCM melting process. The inner cylinder is hot, while the outer one is insulated. The system governing equations and the associated boundary conditions were numerically solved by employing the Galerkin weighted residual finite element method. The impacts of nanoparticle concentration, undulation number of the outer cylinder, annulus eccentricity, and inner cylinder geometry on the melting performance of the storage unit were examined and represented by the liquid fraction, isotherms, Bejan number, velocity, and Nusselt number. The usage of more blades and snowflake surfaces near the hot source's periphery portions disrupts the PCM surface's cohesiveness and increases heat penetration between the PCM layers. The nanoparticle concentration of 6 vol% enhances the melting time by about 32 %, and the undulation number of 8 participates in 25 % of performance enhancement. Putting the hot cylinder closer to the bottom of the storage unit expands the buoyancy effect and enhances the melting process by >3.2 times. The utilization of a Koch snowflake cylinder instead of a triangular one also shows an enhancement of >30 %. © 2022
الكلمات المفتاحية: Annulus Koch snowflake NEPCM Thermal conductivity Thermal energy storage system
Tian M.-W.; Smaisim G.F.; Yan S.-R.; Sajadi S.M.; Mahmoud M.Z.; Aybar H.Ş.; Abed A.M.
Journal of Energy Storage , Vol. 52
36 استشهاد Retracted English ISSN: 2352152X
Digital Economy Academy, Yango University, Fujian, Fuzhou, 350015, China; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Department of Nutrition, Cihan University-Erbil, Kurdistan Region, Iraq; Department of Phytochemistry, SRC, Soran University, KRG, Iraq; Radiology and Medical Imaging Department, College of Applied Medical Sciences, Prince Sattam bin Abdulaziz University, Al-Kharj, Saudi Arabia; Faculty of Health, University of Canberra, Canberra, ACT, Australia; Department of Mechanical Engineering, Eastern Mediterranean University, TRNC, via Mersin 10, Turkey; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hilla, Iraq
In this work, a battery pack (BAPA) containing 21 cylindrical battery cells was investigated. Active and passive approaches are used to regulate the battery's thermal management (THM). An enclosure packed with phase change material (PCM) surrounding the battery is employed for passive heat control. For the active method, forced airflow is utilized. PCM enclosure has two shapes of circular and elliptical, in which paraffin is used. In the active method, air flows into the BAPA at the velocity range of 0.0005 to 0.002 m/s. An economic analysis is performed for the electricity cost of the active method for several European countries. Battery temperature (T-B), pressure drop (PDP) in the BAPA at different air velocities, and two different shapes of the PCM enclosure are evaluated. The FEM is used for simulations. The results reveal that the use of an elliptical enclosure increases the maximum temperature (T-Mx) and average temperature (T-Av) of the battery and the amount of molten PCM also enhances compared to the circular enclosure. Also, the amount of PDP and power cost in the elliptical enclosure is more than that in the circular one. By increasing the velocity, the active technique decreases the amount of T-B while also increasing the amount of PDP and power cost. © 2022 Elsevier Ltd
الكلمات المفتاحية: Active method Economic analysis Paraffin Phase change materials
Fitriyah A.; Nikolenko D.A.; Abdelbasset W.K.; Maashi M.S.; Jalil A.T.; Yasin G.; Abdulkadhm M.M.; Samieva G.U.; Lafta H.A.; Abed A.M.; Amaral L.S.; Mustafa Y.F.
Chemosphere , Vol. 301
36 استشهاد Article English ISSN: 00456535
Faculty of Animal Science, Universitas Nahdlatul Wathan Mataram, Mataram, Indonesia; Department of Prosthetic Dentistry, Sechenov First Moscow State Medical University, Moscow, Russian Federation; Department of Health and Rehabilitation Sciences, College of Applied Medical Sciences, Prince Sattam bin Abdulaziz University, Al Kharj, Saudi Arabia; Department of Physical Therapy, Kasr Al-Aini Hospital, Cairo University, Giza, Egypt; Medical Laboratory Science Department, Faculty of Applied Medical Sciences, King Abdulaziz University, Jeddah, 21589, Saudi Arabia; Faculty of Biology and Ecology, Yanka Kupala State University of Grodno, Grodno, 230023, Belarus; College of Technical Engineering, The Islamic University, Najaf, Iraq; Department of Botany University, Bahauddin Zakariya University, Multan, Pakistan; Al-Manara College for Medical Sciences, Misan, Iraq; Doctor of Medical Sciences, Department of Pathologic Physiology, Samarkand State Medical Institute, Samarkand, Uzbekistan; Al-Nisour University College, Baghdad, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Department of Bioengineering, University of São Paulo (USP) and Minas Gerais State University (UEMG), Minas Gerais, Frutal, Brazil; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Mosul, Mosul, 41001, Iraq
Exposure to air pollution has been associated with many adverse health effects. However, the evidence on the effects on osteoarthritis (OA) is scarce and the potential mechanism is unclear yet. Therefore, this study assessed the effect of exposure to air pollution (gaseous and particulate matter) and OA based on an animal model. We used four groups of female rats, including i) exposure to PMs and gaseous pollutants, ii) exposure only to gaseous pollutants, iii) exposure only to PMs, and iv) control (unexposed) group. The OA biomarkers, i.e., osteocalcin, cartilage oligomeric protein (COMP), and N-Telopeptides of Type I Collagen (NTX-I) and cytokines were measured in the plasma to detect the effect of exposure to ambient air pollution on OA in this animal model. The forced jogging exercises for 1 h and 5 days per week were used to record the physical activities. The median (interquartile range) concentrations of PM2.5 and PM10 were 35.9 (15.4) and 47.5 (22.5) μg/m3, respectively. The median (interquartile range (IQR)) of PM2.5, PM10, CO, NO2, SO2 and O3 in the inlet ambient air were 36.9 (16.9), 51.7 (23.6) μg/m3, 16.1 (12.5) ppm, 413.7 (177.1), 334.2 (218.8) and 208.9 (113.1) ppb, respectively. The osteocalcin was significantly lower in PM as well as PM-gaseous exposure groups compared to control. Moreover, expressions of COMP were increased significantly in the PMs and exposure group compared to the control. For the PMs-gaseous exposure group, the COMP expressions were the highest compared to the control group. Similar results were observed for NTX-I. Exposure to PM and gaseous pollutants significantly increased plasma cytokine levels compared to control. Overall, our study showed a significant effect of exposure to PMs and PMs-gaseous exposure with OA in rats. Moreover, we observed a synergistic effect of mixed gaseous-PMs exposure compared to PMs and gaseous pollutants separately. © 2022 Elsevier Ltd
الكلمات المفتاحية: Air pollution Animal model Cartilage oligomeric protein Osteocalcin
Wang Y.; Abed A.M.; Kumar Singh P.; Tag-Eldin E.; Arsalanloo A.
Case Studies in Thermal Engineering , Vol. 38
35 استشهاد Article Open Access English ISSN: 2214157X
School of Mechanical Engineering, Xijing University, Shaanxi, Xi'an, 710123, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Institute of Engineering and Technology, GLA University, U.P, Mathura, 281001, India; Faculty of Engineering and Technology, Future University in Egypt, Egypt; Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam
Rectangular cavities are efficient tools for latent energy storage which have versatile applications in industry. A great effort has been dedicated to optimize energy storage and melting performance of PCMs in these systems. In this work, a Y-shaped fin has been adopted in a rectangular enclosure filled with Lauric acid as PCM and has been optimized in three distinct stages to find the optimum case. Different parameters have been adjusted to enhance the melting of PCM which include length of base of the fins, length of each of the branches of fins separately and the angle between two branches. The best case selected at each stage of optimization has been selected for further enhancement in the next stage. Enthalpy-porosity approach was used to simulate the melting process. It was concluded that case 3 at optimization stage 1 and case 6 in optimization stage 2 outperform other cases as they can better improve the natural convection generated in the enclosure. Also case 8 with angle of 120 ° has the best performance among all cases with 23.3% faster melting time in comparison with the base case. © 2022 The Authors.
الكلمات المفتاحية: Energy storage Enthalpy-porosity approach LHTESS PCM Phase change Y-shaped fin
Sun J.; Yan G.; Abed A.M.; Sharma A.; Gangadevi R.; Eldin S.M.; Taghavi M.
Process Safety and Environmental Protection , Vol. 168, pp. 544-557
35 استشهاد Article English ISSN: 09575820
School of Civil Engineering, Chongqing Vocational Institute of Engineering, Chongqing, 402260, China; School of Intelligent Construction, Luzhou Vocational and Technical College, Sichuan, Luzhou, 646000, China; Air conditioning and Refrigeration Technologies Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering GLA University, Mathura, India; Department of Mechatronics Engineering, SRM INSTITUTE oF Science and Technology, Tamilnadu, Kattankulatur, 603203, India; Center of research, Faculty of engineering, Future University in Egypt, New Cairo, 11835, Egypt; Department of Mechanical Engineering, Faculty of Engineering, Shiraz Branch, Islamic Azad University, Shiraz, Iran
Today, due to the increase in environmental crises and the challenges facing fossil energies, it seems necessary to exploit and use renewables. Solar and geothermal energies can be integrated as a clean and promising energy production system to produce different forms of useful energy. The existing geothermal wells in Sabalan power plant provide different thermodynamic characteristics. In this regard, this paper develops the thermodynamic-conceptual design and optimization of a new energy cycle based on Sabalan geothermal wells. The considered energy process is based on two flash cycles (FCs), and two bottoming cycles (a Kalina cycle (KC) and a CO2-based Transcritical Rankine cycle (CTRC)). KC and CTRC can increase the level of power generation. Besides that, in the planned energy process, heat exchangers are employed in order to reduce energetic and exergetic losses to transfer thermal energy to a liquefied natural gas cycle (LNGC). LNGC can improve the electrical energy production level. Further, it can supply natural gas (NG) to consumers in the suburbs of the power plant. Additionally, a solar energy system based on parabolic trough solar collectors (PTSCs) has been embedded in order to produce a part of the thermal energy of the energy process. In order to achieve optimal results, the genetic algorithm has been applied to optimize the energetic and exergetic performance of the considered energy process. Based on the research outcomes, the total electricity output of the designed energy process is approximately equal to 26.1 MW. Energy efficiency of almost 24.9% and exergy efficiency of nearly 53.4% are calculated for the energy cycle. Furthermore, the total exergy destroyed through the energy process is approximately 29.5 MW. Under the optimization results, the rates of energy efficiency improvement and exergy destruction reduction for mode A (with NG production) are 17.9% and 3.53%, respectively. Besides, for mode B (without NG production) the rates of energy efficiency reduction and exergy efficiency improvement are 31.7% and 22.1%, respectively. Finally, it was found that, on average, almost 112 collectors are required to supply heat based on the assumption of using solar energy. © 2022 The Institution of Chemical Engineers
الكلمات المفتاحية: Energy and exergy analysis Geothermal Liquefied natural gas Optimization Single flash cycle Solar energy
Tian M.-W.; Abed A.M.; Yan S.-R.; Sajadi S.M.; Mahmoud M.Z.; Aybar H.Ş.; Smaisim G.F.
Journal of Energy Storage , Vol. 52
34 استشهاد Retracted English ISSN: 2352152X
Digital Economy Academy, Yango University, Fujian, Fuzhou, 350015, China; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hilla, Iraq; Department of Nutrition, Cihan University-Erbil, Kurdistan Region, Iraq; Department of Phytochemistry, SRC, Soran University, KRG, Iraq; Radiology and Medical Imaging Department, College of Applied Medical Sciences, Prince Sattam bin Abdulaziz University, Al-Kharj, Saudi Arabia; Faculty of Health, University of Canberra, Canberra, ACT, Australia; Department of Mechanical Engineering, Eastern Mediterranean University, TRNC, via Mersin 10, Turkey; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, Taiwan; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq
In this paper, the thermal management (THM) of a battery pack (BPK) with 9 cylindrical batteries is numerically modeled. The batteries are 18,650 lithium-ion (LIN) type, which are placed in an air duct. A capsule of Phase Change Materials (PCM) is placed around all the LIN battery cells. The PCM used was CaCl2.6H2O, which was oval in the PCM capsule. This study was performed when the entire PCM was molten, and the air stream was trying to solidify it. At all times, the LIN battery is working and generating heat. By changing the horizontal distance of the battery cells from each other, this study has been done for different times of battery operation. An economic analysis has also been performed on the cost of electricity consumed to generate airflow in the battery pack for different battery distances. For numerical modeling, multi-physics COMSOL software has been used. The enthalpy method was used to simulate the PCM freezing front. Examination of the PCM solidification front showed that the PCM solidification was formed from the air inlet side. The highest amount of solid PCM occurred at fixed times for the first column of the LIN battery, while the last column batteries had the lowest amount of frozen PCM. Increasing the distance of the LIN battery cells horizontally from each other causes the amount of PCM temperature (TPCM) and LIN battery temperature (TBat) to decrease. At 120 min and at a horizontal distance of 8 cm from each other, the amount of molten PCM is 22.98% and at a distance of 11 cm the amount of molten PCM It has reached 8.73%. Changing the distance between the batteries may thus affect the quantity of molten PCM by 14.25% at this time. It was also found that increasing the distance between the batteries reduces the cost of electricity used to solidify the PCM. © 2022 Elsevier Ltd
الكلمات المفتاحية: Economic Horizontal distance Hybrid Lithium battery Oval chamber Phase change material
Smaisim G.F.; Gholami M.; Toghraie D.; Hashemian M.; Abed A.M.
Progress in Nuclear Energy , Vol. 151
34 استشهاد Article English ISSN: 01491970
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq
In this study, the rotating twisted tape and its effect on fluid flow and heat transfer as well as Performance Evaluation Criterion (PEC) in a tube under constant heat flux is investigated. The twisted tapes are examined in two rotating and stationary cases, namely four geometric cases of Plain Tube (PT), tube equipped with Stationary Twisted Tape (STT), tube equipped with Rotating Twisted Tape- Clockwise (RTT-C) and the tube is equipped with Rotating Twisted Tape-Counterclockwise (RTT-CC). The used nanofluid is Al2O3/water nanofluid in volume fraction of nanoparticles 0, 1, 2, and 3% and is considered as Newtonian, and two-phase mixture method is used to simulate the nanofluid. The flow regime in this study is laminar and the Reynolds numbers are 250, 500, 750, 1000, and heat flux of 5000 W/m2 is applied to the wall of the tube. The height of the twisted tape is 90% of the height of the channel and they act as thermal insulation and are only responsible for creating the secondary flow. The results show that increasing the Reynolds number increases Nuave and increases the pumping power, and by using nanoparticles and changing the volume fraction of nanoparticles from 0 to 3%, heat transfer, pumping power, and pressure drop are increased. © 2022 Elsevier Ltd
الكلمات المفتاحية: Nanofluid Numerical investigation Performance evaluation criterion Self-rotating twisted tape
Saadoon Z.H.; Ali F.H.; Hamzah H.K.; Abed A.M.; Hatami M.
Scientific Reports , Vol. 12 (1)
31 استشهاد Article Open Access English ISSN: 20452322
College of Engineering, Mechanical Engineering Department, University of Babylon, Babylon City, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
The combination of nano fluid and changing cross-section mini-channel heat sink effects have become a remarkable choice for the use of thermal devices such as miniature electronic devices to be effectively cooled. In this paper, the comparison of three dimensional straight and wavy channel configuration with using different types nano fluids are numerically investigated. The effects of wave amplitude and A particular type of volume fraction of (Copper Oxide CuO, Dimond Al2O3, Iron Oxide Fe3O4, Titanium Oxide TiO2 and Silver Ag-nano fluids are offered. Three amplitudes of waves (0.15 mm, 0.2 mm and 0.25 mm) and Reynold’s number from 200 to 1000 and concentration volume varieties from 0 to 0.075 are used. The effect on thermal resistance, pressures drop, factor of friction of the mini channel is displayed. It is observed that the mini-channel sink's heat transfer efficiency is greatly enhanced compared to the straight channel in an event of adding distilled water as accoolant. The results indicate that nano fluid and wavy mini-channel can boost the heat sink's hydrothermal efficiency and Ag- water nano fluid in term of heat transfer, it outperforms other nanofluids an enhancement in the Nusselt number reached to 54% at concentration volume 0.075. © 2022, The Author(s).
Li F.; Abed A.M.; Naghdi O.; Nasajpour-Esfahani N.; Hamedi S.; Al Mashhadani Z.I.; Fazilati M.A.; Mohammed B.M.; Hadrawi S.K.; Smaisim G.F.; Toghraie D.
Journal of Energy Storage , Vol. 55
30 استشهاد Article English ISSN: 2352152X
Zhejiang Business Technology Institute, Zhejiang, Ningbo, 315012, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Kennesaw State University, Department of Mechanical Engineering, MD # 9075, 840 Polytechnic Lane, Marietta, 30060, GA, Georgia; Department of Mechanical Engineering, Daneshpajoohan Higher Education Institute, Iran; Al-Nisour University College, Baghdad, Iraq; Engineering Department, Mazaya University College, Dhi Qar, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Najaf, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Najaf, Iraq
Energy storage is among the factors that could reduce the use of fossil fuels. Having a large heat storage capacity, phase change materials found their wide applications in energy storage applications. The present study investigates the effect of using phase change materials on the performance of a double pipe heat storage system. The three-dimensional simulation was developed to model the transient flow and heat transfer via the finite volume method. To enhance the heat transfer, fins with the varying cross-sectional area are employed over the surface of the inner tube. Furthermore, to enhance the water side heat transfer, the vortex generator is employed there. The sensitivity analysis was performed to unveil the effect of inlet hot water temperature on the change and discharge processes. The results show that the fins inside the phase change material reduce the melting time up to 100 min and increase the outlet hot water temperature. Also, using the vortex generator in the water path had the reverse effect on the charging process and increases the charging time. For hot water temperature of 75 °C, the temperature of phase change material archives to its maximum value after 189 min. In the case of 70 °C hot water temperature, the phase change process begins 41 min later than in the case of temperature 75 °C and reaches its maximum temperature within 229 min. © 2022 Elsevier Ltd
الكلمات المفتاحية: Double pipe heat exchanger Phase change materials (PCM) Thermal storage Unsteady flow Vortex generator
Abed A.M.; Rashid Z.N.; Abedi F.; Zeebaree S.R.M.; Sahib M.A.; Mohamad Jawad A.J.; Redha Ibraheem G.A.; Maher R.A.; Abdulkareem A.I.; Ibraheem I.K.; Azar A.T.; Al-khaykan A.
Measurement and Control (United Kingdom) , Vol. 55 (3-4), pp. 209-226
30 استشهاد Article Open Access English ISSN: 00202940
Department of Air conditioning and refrigeration, Al-Mustaqbal University college, Babylon, Iraq; Technical College of Informatics, Sulaimani Polytechnic University, Sulaymaniyah, Iraq; Department of Mathematics, College of Education, Alzahraa University for women, Karbala, Iraq; Energy Dept., Technical College of Engineering, Duhok Polytechnic University, Duhok, Iraq; University of Information Technology and Communications, College of Engineering, Baghdad, Iraq; Department of Computer Techniques Engineering, Al-Rafidain University College, Baghdad, Iraq; Electrical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq; Faculty of Engineering, Isra University, Amman, Jordan; Control and Systems Engineering Department, University of Technology, Baghdad1, Iraq; Department of Computer Techniques Engineering, Dijlah University College, Baghdad, Iraq; College of Computer and Information Sciences, Prince Sultan University, Riyadh, Saudi Arabia; Faculty of Computers and Artificial Intelligence, Benha University, Benha, Egypt
This work proposes a new kind of trajectory tracking controller for the differential drive mobile robot (DDMR), namely, the nonlinear neural network fractional-order proportional integral derivative (NNFOPID) controller. The suggested controller’s coefficients comprise integral, proportional, and derivative gains as well as derivative and integral powers. The adjustment of these coefficients turns the design of the proposed NNFOPID control further problematic than the conventional proportional-integral-derivative control. To handle this issue, an Enhanced Fruit Fly Swarm Optimization algorithm has been developed and proposed in this work to tune the NNFOPID’s parameters. The enhancement achieved on the standard fruit fly optimization technique lies in the increased uncertainty in the values of the initialized coefficients to convey a broader search space. subsequently, the search range is varied throughout the updating stage by beginning with a big radius and declines gradually during the course of the searching stage. The proposed NNFOPID controller has been validated its ability to track specific three types of continuous trajectories (circle, line, and lemniscate) while minimizing the mean square error and the control energy. Demonstrations have been run under MATLAB environment and revealed the practicality of the designed NNFOPID motion controller, where its performance has been compared with that of a nonlinear Neural Network Proportional Integral Derivative controller on the tracking of one of the aforementioned trajectories of the DDMR. © The Author(s) 2022.
الكلمات المفتاحية: fractional control fruit fly optimization kinematic controller mobile robot proportional-integral-derivative control trajectory tracking
Cai W.; Sabetvand R.; Abed A.M.; Toghraie D.; Hekmatifar M.; Rahbari A.; Yasin G.; Abdulkadhim A.H.; Smaisim G.F.
Energy Reports , Vol. 8, pp. 7468-7475
30 استشهاد Article Open Access English ISSN: 23524847
Engineering Training and Teaching Center, Northeast Electric Power University, JiLin city, JiLin Province, 132012, China; Department of Energy Engineering and Physics, Faculty of Condensed Matter Physics, Amirkabir University of Technology, Tehran, Iran; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Botany, Bahauddin Zakariya University, Multan, Pakistan; Department of Computer Engineering, Technical Engineering College, Al-Ayen University, Thi-Qar, Iraq; Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq
In this computational work, the Tetrahydrofuran (THF) hydration process in the vicinity of the Copper (Cu) matrix was reported by the molecular dynamics simulation (MDS). Our MDS outcomes are described with various physical parameters like total energy (TE), number of the atomic cage, hydrate layers, and enthalpy value. This study represents all structures by DREIDING, Universal Force Field (UFF), and Embedded Atom Model (EAM) with the atomic arrangement. Computational outcomes display that the TE of samples is converged to a constant value after t=100 ns; this computation indicates the physical stability at a defined initial condition. The temperature (T) increase in simulated structures causes an increase in the mobility of atoms in the MD box. This process decreases the atomic order in the simulated mixture, and so the hydration process is weakened. Numerically, with T enhancement from 260 K to 290 K, atomic cages and hydrate layers decrease from 31 to 16 and 4 to 2, respectively. On the other hand, pressure (P) increasing causes atomic interaction to enlarge in defined systems. This interaction enlarges the cause of atomic order improvement in the MD box. Also, as the P increased from 0 to 50, the number of cages detected in the simulation box increased from 31 to 39. So, the T reduction and increase in the initial P cause an effective hydration process in the MD box. Also, the simulation results show that at 0 bar P, with increasing T from 260 to 290 K, the system's enthalpy decreases from 21.21 kcal/mol to 16.67 kcal/mol. On the other hand, at 260 K, increasing P from 0 to 50 bar, the system's enthalpy enhances from 21.21 kcal/mol to 25.48 kcal/mol. These calculations show that the hydration process occurs effectively by initial condition manipulation, which can be important for various purposes such as oil industry applications. © 2022 The Author(s)
الكلمات المفتاحية: Aqueous environment Hydration process Molecular dynamics Pressure effect Temperature effect Tetrahydrofuran
Smaisim G.F.; Abed A.M.; Hadrawi S.K.; Shamel A.
Journal of Engineering (United Kingdom) , Vol. 2022
29 استشهاد Article Open Access English ISSN: 23144904
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Kufa, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Kufa, 54001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Refrigeration and Air-conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; Department of Chemistry, Ardebil Branch, Islamic Azad University, Ardebil, Iran
Concerns about limited energy resources and environmental problems are growing. One of the solutions to increase energy efficiency is to produce it sparsely. In this regard, cogeneration systems are of particular importance. The home sector is one of the most consumed sectors due to the potential of solar radiation in this country, a system of simultaneous generation of electricity and heat for the home sector has been proposed, and modeling operations have been performed on the proposed system. The results show that the proposed system is capable of supplying more than 85% of hot water demand and annual production of 316.36 kWh of electricity. © 2022 Ghassan F. Smaisim et al.
Liu Z.; SU Z.; Abed A.M.; Chaturvedi R.; Feyzbaxsh M.; Kiani Salavat A.
Applied Thermal Engineering , Vol. 216
29 استشهاد Retracted English ISSN: 13594311
School of Petroleum Engineering, Guangdong University of Petrochemical Technology, Guangdong, Maoming, 525000, China; Faculty of Physical Education, Huai Nan Normal University, AnHui, Huai Nan, 232038, China; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Mathura, India; Mechanical Engineering Department, University of Kurdistan, Sanandaj, Iran; Mechanical Engineering Department, University of Mohaghegh Ardabili, Adrabil, Iran
Among the most prominent renewable energy sources worldwide, geothermal heat is plentiful in almost every location containing subterranean geofluid, primarily water. Additionally, given the excessive consumption of water in various manners globally, serious focus has been driven towards means of compensation for freshwater resources. The present study proposes four systems powered by geothermal sources, thereby introduced as geothermal systems. System D, comprised of a double-flash geothermal system, a humidification dehumidification desalination system, and two thermoelectric generators, demonstrated the most promising results among all systems after being analyzed thermodynamically and exergoeconomically, all of which performed using EES software. The evaluated parameters are sum unit cost of products, net generated power output, energetic and exergetic efficiencies, which yielded 4.532$/GJ, 106.8 kW, 45.83 %, and 51.53 %, respectively. In order to generate overplus power and further exploit waste heat, thermoelectric generators were implemented in the systems as substitutions for the condensers. The findings suggested an extra sum of 10.112 kW generated power and exergetic improvement by 1.15 % taking event in system D due to the application of two thermoelectric generators. Moreover, optimization scenarios were run to maximize energetic and exergetic performances and minimize the sum unit cost of products. Three weight coefficients were assumed for each of the target parameters within the single-objective optimization scenarios, namely the thermal efficiency mode, exergy efficiency mode, and economic mode. Moreover, a multi-objective optimization mode was carried out. The optimal results are addressed further along the paper. The present study aims at proposing an optimal system respondent to two of contemporary society's fundamental requisites, power and freshwater, and in order to do so, an evolutional sequence has been undertaken to satisfy the stated requirements. © 2022
الكلمات المفتاحية: Exergoeconomic analysis Geothermal system Humidification-dehumidification desalination Steam turbine Thermodynamic analysis Thermoelectric generator
Hussein A.K.; Rashid F.L.; Abed A.M.; Al-Khaleel M.; Togun H.; Ali B.; Akkurt N.; Malekshah E.H.; Biswal U.; Al-Obaidi M.A.; Younis O.; Abderrahmane A.
Sustainability (Switzerland) , Vol. 14 (21)
29 استشهاد Review Open Access English ISSN: 20711050
Mechanical Engineering Department, College of Engineering, University of Babylon, Hillah, 00964, Iraq; Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala, 56001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hillah, 51001, Iraq; Department of Mathematics, Khalifa University, Abu Dhabi, 127788, United Arab Emirates; Department of Mathematics, Yarmouk University, Irbid, 21163, Jordan; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Biomedical Engineering Department, University of Thi-Qar, Nassiriya, 64001, Iraq; Faculty of Computer Science and Information Technology, Superior University, Lahore, 54000, Pakistan; Department of Mechanical Engineering, Munzur University, Tunceli, 62000, Turkey; Department of Power Engineering and Turbomachinery, Silesian University of Technology, Gliwice, 44-100, Poland; Department of Mathematics, National Institute of Technology Rourkela, Rourkela, 769008, India; Middle Technical University (MTU), Technical Institute of Baquba, Baquba, 32001, Iraq; Department of Mechanical Engineering, College of Engineering in Wadi Addwasir, Prince Sattam Bin Abdulaziz University, Al Kharj, 11942, Saudi Arabia; Department of Mechanical Engineering, Faculty of Engineering, University of Khartoum, Khartoum, 11111, Sudan; Laboratoire de Physique Quantique de la Matière et Modélisation Mathématique (LPQ3M), University of Mascara, Mascara, 29000, Algeria
Fresh water is scarce, making it a worldwide issue. In order to address global freshwater demand, a filtration technique is needed. Solar distillation (SD) that purifies brackish and sub-terranean water has been proven to be a promising green technology. It produces distilled water which can be used as potable water for drinking and other purposes. The designs, operations, and configurations of several inverted solar stills are thoroughly examined in this article. All techniques for solar water distillation to separate saltwater from freshwater have the same fundamental idea. It has been demonstrated that for a specified mass of water in the top basin, the daily output of an inverted absorber double-basin solar still (IASS) grows with increasing water depth in the bottom basin. Nevertheless, as the water depth in the bottom basin rises from 1 cm to 5 cm, the output of an inverted absorber double-basin solar system falls by about 27%. At water depths of 4, 6, and 8 cm, the daily yields from inverted absorber solar stills paired with a refrigeration cycle (RIASS) were 6.4, 10.08, and 9.5 L/day, respectively. The results also showed a substantial rise in water temperature in the inverted absorber solar still as a result of lower bottom heat loss and larger absorptivity. In this study, the emphasis on energy, efficiency, and environmental concerns remains with the modified multi-wick basin-type inverted absorber solar panel. The performance of the inverted trickling solar still was assessed with a 60 ppm average salinity under various sun radiation, feed water flow rate, and existence conditions for natural convection. It was found that the still could produce 2.55 L/day m2 of fresh water, a 15% increase. Brackish water with a salinity of 6000 ppm was used to test the still in November at tilt angles of 47◦ and 32◦ . Condensate production at the specified angles was 2.8 and 2 L/d, respectively. A total output of 6.907, 5.681, and 4.650 kg/m2 /day was also generated using the modified multi-wick basin-type inverted absorber solar still (MMWBIASS) at water depths of 1, 2, and 3 cm, respectively. With black cotton wicks, the MMWBIASS had a total thermal efficiency of 34.04%, 28.17%, and 23.61%. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
الكلمات المفتاحية: inverted solar still modern combinations solar desalination
Hasan H.A.; Hatem A.A.; Abd L.A.; Abed A.M.; Sopian K.
Cleaner Engineering and Technology , Vol. 10
28 استشهاد Article Open Access English ISSN: 26667908
Department of Air Conditioning & Refrigeration Techniques, AL-Esra'a University College, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Solar Energy Research Institute, University Kebangsaan Malaysia, Bangi, Selangor, 43600, Malaysia
The impact of utilizing Nanofluids with different metal oxide nanoparticles on heat transfer enhancement and fluid flow for concentration photovoltaic thermal the CPVT collector with Fresnel lens is demonstrated using CFD simulation. With the rising temperature, the electrical efficiency and output power of Multi-Junction Solar Cells drop. Four different types of nanofluids and water are utilized as cooling fluids to disperse heat from Multi-Junction Solar Cells by moving the fluid within the mini-channel beneath the PV Solar Cells. In the current analysis, the Reynolds numbers range from 2000 to 18000. For all forms of cooling fluids, the average Nusselt numbers are augmented by rising Reynolds numbers. The CFD results demonstrated that the Nusselt number of all nanofluid cooling fluids is greater than that of water. When compared to water in a CPVT collector, water-SiO2 nanofluid provides the maximum heat transfer improvement of 12.5%. The silicon dioxide nanoparticles have high thermal conductivity, with the water-SiO2 nanofluid exhibiting the greatest heat transfer increase, followed by water-Al2O3, water-ZnO, water-CuO, and water. The average top surface temperature of the mini-channel for the CPVT collector is reduced by 7% when water-SiO2 nanofluid is used as a cooling fluid and by 3.4% when water is used. The usage of water-SiO2 nanofluid has a significant impact on the heat dissipation with high heat transfer enhancement from Multi-Junction Solar Cells in CPVT collector, leading to an increase in electrical efficiency. © 2022
الكلمات المفتاحية: Computational fluid dynamics Cooling channel Fresnel lens Nanofluids Pressure drop Simulation The CPVT collector
Guo F.; Kumar Narukullapati B.; Mohammed K.J.; Altimari U.S.; Abed A.M.; Yan Z.; Ahmad N.; Dwijendra N.K.A.; Sivaraman R.; Abdulkadhim A.H.
Solar Energy , Vol. 243, pp. 62-69
26 استشهاد Article English ISSN: 0038092X
China Railway Seventh Bureau Group Electrical Engineering Co. Ltd, Henan, Zhengzhou, China; Electrical and Electronics Engineering, Vignan's Foundation for Science Technology and Research, Guntur, India; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Hilla, 51001, Iraq; Al-Nisour University College, Baghdad, Iraq; School of Computer Science and Technology, Hubei University of Technology, Hubei, Wuhan, China; Department of Physics, College of Science, King Khalid University, P.O. Box: 9004, Abha, 61413, Saudi Arabia; Department of Architecture, Faculty of Engineering, Udayana University, Bali, Indonesia; Department of Mathematics, Dwaraka Doss Goverdhan Doss Vaishnav College, Arumbakkam, University of Madras, Chennai, India; Department of Computer Engineering, Technical Engineering College, Al-Ayen University, Thi-Qar, Iraq
Dye-sensitized solar cells (DSSCs) are among the third generation of solar cells which require further development to find practical applications. One reason that prevents the widespread use of DSSCs is the high cost of their counter electrode (CE). This study proposes a new CE based on WS2/MoS2 material, which demonstrates an excellent performance due to its high electrocatalytic performance and charge transport properties. These qualities are achieved due to the increased active surface area of the composite material. Our champion cell achieved an efficiency of 7.30%, which shows respective improvements of 25% and 18% from the DSSCs fabricated from WS2 and MoS2 CEs. It also displays an efficiency improvement of 3.5% in comparison with the expensive platinum CE. These efficiency enhancements correspond to the increased current densities of the DSSCs as a result of better CE properties. © 2022 International Solar Energy Society
الكلمات المفتاحية: Charge transport Composite Counter electrode DSSC Electrocatalytic behavior MoS<sub>2</sub> WS<sub>2</sub>
Dwijendra N.K.A.; Jalil A.T.; Abed A.M.; Bashar B.S.; Al-Nussairi A.K.J.; Hammid A.T.; Shamel A.; Uktamov K.F.
Clean Energy , Vol. 6 (4), pp. 682-692
25 استشهاد Article Open Access English ISSN: 25154230
Faculty of Engineering, Udayana University, Bali, 80361, Indonesia; Faculty of Biology and Ecology, Yanka Kupala State University of Grodno, Grodno, 230023, Belarus; College of Technical Engineering, The Islamic University, Najaf, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Al-Nisour University College, Baghdad, Iraq; Al-Manara College for Medical Sciences, Maysan, Iraq; Computer Engineering Techniques, Faculty of Information Technology, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq; Department of Chemistry, Ardebil Branch, Islamic Azad University, Ardebil, Iran; Economic Security Department, Tashkent State University of Economics, Tashkent City, Uzbekistan
The main problem of wind turbines is associated with induction generators in their power supply during short circuits in the grid. In this research, a new method is presented for the uninterrupted operation of a wind turbine equipped with an induction generator fed on both sides of feeding during network errors. Wind farms equipped with a doubly-fed induction generator (DFIG) require two abilities to allow system operators to increase proficiency. These capabilities include fault ride-through and synchronization of output force fluctuations, especially when these generators generate significant electrical power. A MATLAB® software environment has been used to evaluate and improve the performance of these turbines. A fuzzy complement (FC) controller is used to improve the performance of the DFIG. The results demonstrate that this controller limits the operation of the turbine current and voltage in the short-circuit mode well. Regarding results obtained from comparing two different modes, it can be said that ripple is 4% in the FC mode, while this parameter is equal to 10% for the proportional-integral controller. © 2022 The Author(s). Published by Oxford University Press on behalf of National Institute of Clean-and-Low-Carbon Energy.
الكلمات المفتاحية: fuzzy controller MATLAB sub-synchronous performance wind turbine
Smaisim G.F.; Abed A.M.; Shamel A.
Complexity , Vol. 2022
25 استشهاد Article Open Access English ISSN: 10762787
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Kufa, 54001, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Kufa, 54001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Chemistry, Ardebil Branch, Islamic Azad University, Ardebil, Iran
Nowadays, due to restrictions on fossil fuels, the use of renewable energies is increasing day by day. Among renewable energies, solar energy has received more attraction due to its availability in all places. Among solar energy technologies, the solar tower has been welcomed due to its high power generation of electrical energy. For accurate modeling of the studied system, each component of the system has been evaluated and modeling has been done. Therefore, in this research, solar tower modeling has been conducted to achieve high electrical energy production, and to better compare the production rate, 5 cities in Iran with different weather conditions have been considered. According to the results, it can be mentioned that the highest production power by the studied system is related to Shiraz city with an average production of 20 kW/m2, and among the cities studied, the lowest rate is related to Mashhad with a production power of 15 kW/m2. © 2022 Ghassan F. Smaisim et al.
Sari A.; Abdelbasset W.K.; Sharma H.; Opulencia M.J.C.; Feyzbaxsh M.; Abed A.M.; Hussein S.A.; Bashar B.S.; Hammid A.T.; Prakaash A.S.; Uktamov K.F.
Journal of Energy Storage , Vol. 50
23 استشهاد Retracted English ISSN: 2352152X
Department of Management Information Systems, Girne American University, via Mersin 10, North Cyprus, Kyrenia, Turkey; Department of Health and Rehabilitation Sciences, College of Applied Medical Sciences, Prince Sattam bin Abdulaziz University, Al Kharj, Saudi Arabia; Department of Physical Therapy, Kasr Al-Aini Hospital, Cairo University, Giza, Egypt; Department of Computer Engineering and Applications, GLA University Mathura, India; College of Business Administration, Ajman University, Ajman, United Arab Emirates; Mechanical Engineering Department, University of Kurdistan, Sanandaj, Iran; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Al-Manara College for Medical Sciences, Maysan, Iraq; Al-Nisour University College, Baghdad, Iraq; Computer Engineering Techniques Department, Faculty of Information Technology, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq; Department of Mathematics, Panimalar Institute of Technology Poonamallee Chennai, Tamilnadu, Chennai, India; Tashkent State University of Economics, Tashkent, Uzbekistan
The present study proposes a novel cogeneration power plant powered by a double-flash geothermal system. A double-flash geothermal system with a high- and low-pressure turbine was employed to produce power. Moreover, a low-temperature ORC with a turbine was utilized to produce power from the double-flash geothermal waste heat, and the pre-cooled Linde-Hampson cycle was included for Argon liquefaction by consuming a portion of the net power output for initiation. The system is simulated using Engineering Equation Solver software (EES) to specifically analyze the process in each state. The system was investigated concerning the first and second laws of thermodynamics and entry loss. Four conventional working fluids were thermodynamically assessed to identify one with the highest compatibility with the system purposes. The findings demonstrate that the system generates sheer work by 235.5 kW and Argon liquefaction by 0.115 kg/s. The efficiency for the first law of thermodynamics, energetic efficiency, and the entrance loss was calculated; namely, 14.37%, 63.5%, and 1.265 MW·K, respectively. The computation for total exergy destruction in the system was 370.68 kW. The most significant exergy destruction emerges in the evaporator, by 73.78 kW. In addition, the study presents a parametric evaluation of the system to perform minimization and maximization of exergy efficiency and entrance loss based on geofluid temperature, the inlet pressure of flash chamber 1, the inlet pressure of flash chamber 2, the outlet pressure of compressor 1, figure of merit, and superheater temperature difference. Further, the condensers were substituted with thermoelectric generators to condense the turbine output fluid and produce power. The total output power from the thermoelectric generators was calculated as 18.853 kW, singlehandedly elevating the exergy efficiency by 4.23%. Ultimately, single- and multi-objective optimizations (weighted sum) were carried out. ηI was 15.01% with w1 = 1 weight coefficient in Thermal Efficiency Mode, ηII was 66.12% with w2 = 1 weight coefficient in Exergy Efficiency Mode, and Ġloss was 1.136 MW·K with w3 = 1 weight coefficient in the Low Entry Mode. © 2022 Elsevier Ltd
الكلمات المفتاحية: Cogeneration system Double-flash geothermal power plant Entry analysis Linde-Hampson cycle Low-temperature ORC Thermoelectric generator
Li F.; Kumar T.Ch.A.; Elmasry Y.; Singh P.K.; Abed A.M.; Algarni A.D.; Nguyen V.N.; Wae-Hayee M.; Phong Nguyen P.Q.; Galal A.M.
Case Studies in Thermal Engineering , Vol. 40
22 استشهاد Article Open Access English ISSN: 2214157X
Zhejiang Business Technology Institute, Zhejiang, Ningbo, 315012, China; Department of Mechanical Engineering, Vignan's Foundation for Science Technology and Research, Vadlamudi, India; Department of Mathematics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Department of Mathematics, Faculty of Science, Mansoura University, Mansoura, 35516, Egypt; Department of Mechanical Engineering, Institute of Engineering and Technology, Gla University, U.P., Mathura, 281406, India; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Information Technology, College of Computer and Information Sciences, Princess Nourah Bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia; Institute of Engineering, Hutech University, Ho Chi Minh City, Viet Nam; Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hatyai, Songkhla, 90110, Thailand; Patet Research Group, Ho Chi Minh City University of Transport, Ho Chi Minh City, Viet Nam; Department of Mechanical Engineering, College of Engineering in Wadi Alddawasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, P.O 35516, Mansoura, Egypt
To cope with the increasing heat generation resulting from increased power in micro-scale devices, an optimum design of a tree-like microchannel heat sink is suggested utilizing Artificial Neural Networks (ANN) and Response Surface Methodology (RSM). Based on the numerical finite volume model, both ANN and RSM models were trained, and their performances were assessed using four distinct performance criteria. The results showed that both of the models are reliable for the purpose of this study, showing a significantly high adjusted R2 for both performance control variables pressure drop (ΔP) and Nusselt number (Nu). The adjusted R2 values observed for the RSM were 0.987 and 0.997, respectively, for the Nu and ΔP. These values were calculated as high as 0.997 for Nu prediction and 0.997 for ΔP prediction using the ANN. Finally, utilizing the calibrated RSM and ANN models, three optimum design configurations for three different purposes given the priority requirements of the heat sink implementations were suggested. The minimum ΔP configuration is suitable for the longevity of the heat sink, and the maximum Nu configuration is suitable for applications where heat transfer performance is more critical. For a balanced optimum design, the efficiency index was maximized. © 2022 Published by Elsevier Ltd.
الكلمات المفتاحية: Artificial neural network Fractal-shaped microchannel heat sink Heat transfer performance increment Hydraulic performance increment Optimization Response surface methodology
Smaisim G.F.; Abed A.M.; Hadrawi S.K.; Shamel A.
Clean Energy , Vol. 6 (5), pp. 693-704
20 استشهاد Article Open Access English ISSN: 25154230
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Refrigeration and Air-Conditioning Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf, 54001, Iraq; Computer Engineering Department, Imam Reza University, Mashhad, Iran; Department of Chemistry, Ardebil Branch, Islamic Azad University, Ardebil, Iran
The use of solar energy is highly welcomed due to its availability everywhere. Among the types of solar energy technologies, the use of this type of energy to produce heat from different aspects is much more common, so in this research we have tried to examine different aspects of producing thermal energy from solar energy to supply the heat required by the pool. For this purpose, numerical modelling of the solar pool has been done by considering the heat-transfer characteristics and validation has been done to ensure the obtained results. In this paper, according to the physical realities facing solar systems in two scenarios, an analysis with shadow and without shadow has been done. One of the important results is that as the surface of the pool increases, the amount of heat absorption by the pool fluid will increase, but the effect of the shadow will decrease. © The Author(s) 2022. Published by Oxford University Press on behalf of National Institute of Clean-and-Low-Carbon Energy This is an Open Access article distributed under the terms of the Creative Commons Attribution-NonCommercial License (https://creativecommons.org/licenses/by-nc/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is properly cited. For commercial re-use, please contact [email protected].
الكلمات المفتاحية: experimental study numerical modelling solar energy solar pool thermal performance
Li H.; Nasirin C.; Abed A.M.; Olegovich Bokov D.; Thangavelu L.; Abdulameer Marhoon H.; Lutfor Rahman M.
Arabian Journal of Chemistry , Vol. 15 (4)
19 استشهاد Article Open Access English ISSN: 18785352
College of Mechanical and Electrical Engineering, Zhejiang Industry Polytechnic College, Shaoxing, Zhejiang 312000, China; College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang 310014, China; College of Health Sciences (STIKES) Mataram, Indonesia; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Institute of Pharmacy, Sechenov First Moscow State Medical University, 8 Trubetskaya St., bldg. 2, Moscow, 119991, Russian Federation; Laboratory of Food Chemistry, Federal Research Center of Nutrition, Biotechnology and Food Safety, 2/14 Ustyinsky pr., Moscow, 109240, Russian Federation; Department of Pharmacology, Saveetha Dental College, Saveetha Institute of Medical and Technical Science, Saveetha University, Chennai, India; Information and Communication Technology Research Group, Scientific Research Center, Al-Ayen University, Thi-Qar, Iraq; College of Computer Sciences and Information Technology, University of Kerbala, Karbala, Iraq; Faculty of Science and Natural Resources, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, 88400, Malaysia
Machine learning (ML) methods were developed and optimized for description and understanding a physical separation process. Indeed, this work indicates application of machine learning technique for a real physical system and optimization of process parameters to achieve the target. A bunch of datasets were extracted from resources for physical adsorption process in removal of impurities from water as a case study to test the developed machine learning model. The case study process is adsorption process which has extensive application in science and engineering. The machine learning (ML) method was developed, and the parameters were optimized in order to get the best simulation's performance for adsorption process. The data are used to correlate the adsorption capacity of the material to the adsorption parameters including dosage and solution pH. Randomized training and validation were performed to predict the process's output, and great agreement was obtained between the predicted values and the observed values with R2 values greater than 0.9 for all cases of training and validation at the optimum conditions. Three different machine learning techniques including Random Forest (RF), Extra Tree (ET), and Gradient Boosting (GB) were employed for the adsorption data. Quantitatively, R2 scores of 0.958, 0.998, and 0.999 were obtained for RF, GB, and ET, respectively. It was indicated that GB and ET models performed almost the same and better than RF in prediction of adsorption data. © 2021
الكلمات المفتاحية: Artificial intelligence Machine learning Modeling Optimization Separation
Zareei J.; Ghadamkheir K.; Farkhondeh S.A.; Abed A.M.; Catalan Opulencia M.J.; Nuñez Alvarez J.R.
Energy , Vol. 255
16 استشهاد Article English ISSN: 03605442
Department of Biosystems Engineering, Faculty of Agriculture, Ferdowsi University of Mashhad, Iran; Department of Mechanical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Iran; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; College of Business Administration, Ajman University, Ajman, United Arab Emirates; Department of Energy, Universidad de la Costa, Barranquilla, Colombia
This research investigates two main stages of conversion of port fuel-injected engine to direct-injection. The firs one is the modification of Injection mechanism of CNG direct-injection engine. The second stage is the investigation of Hydrogen effects as an alternative gaseous additive on CNG. The Results were measured at different injection pressures (15, 20, and 25 bar) and various hydrogen enrichment as additive fuel to CNG. At the first stage, results show that compared to the Gasoline port injection system, a CNG direct-injection engine can decrease CO2 emission up to 59.5% and increase NOx emission up to 56.9%. In the second stage, when Hydrogen being used in the fuel mixture, and an increase in the injection pressure (from 15 to 25 bar) in the DI engine along with 30%HCNG applies, the amounts of engine power and torque enhanced about 5.92% and 6.55%, respectively. Also, fuel conversion efficiency increased by up to 6.87% with 25 bar of injection pressure compared to conventional system. Emission reduction up to 32.5% for CO observed in case of using 40%HCNG relative to pure CNG. NOx emission had a reverse correlation with Hydrogen concentration, it increased about 22.5% while using 40% of Hydrogen in volumetric blend HCNG. © 2022
الكلمات المفتاحية: Direct injection Fuel conversion efficiency Hydrogen Modified injection mechanism Natural gas
Abed A.M.; Sh. Majdi H.; Sopian K.; Ali F.H.; Al-Bahrani M.; Al-Amir Q.R.; Yakoob A.K.
Case Studies in Thermal Engineering , Vol. 39
16 استشهاد Article Open Access English ISSN: 2214157X
Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, Selangor, 43600, Malaysia; Mechanical Engineering Department, College of Engineering, University of Babylon, Babylon, Iraq
This paper deals with the Techno-Economic Analysis of dual ejectors -flash tank absorption cooling cycle assisted by solar energy. In this study, the solar system is simulated using the TRNSYS software and a one-dimensional ejector is modeled in EES (Engineering Equation Solver) using NH3/H2O as working fluids. A cooling capacity of 5 kW is considered and a parametric optimization is carried out to select the optimum size of the thermal solar system. The design of the absorption cooling cycle under the Malaysia climate conditions was 5 kW (about 1.5 refrigeration ton) with a solar thermal collector (evacuated tube solar collector of 8.5 m2 sloped at 14° and 0.35 m3 tank size with 0.1 kg s-1 for fluid flow rate). The solar fraction varied between 53.6% in March and 68.6% in February. The payback period and profit gain for the dual ejector cycle, flash -tank with ejector and basic cycle with only ejector are 11 yr, 3192 $; 13.5yr, 1647$; and 16 yr, 874$ respectively. The results also show that the combined dual ejectors-flash tank cycle (Cycle 3) was up to 27% less than of the absorption combined ejector system (Cycle -1), and 10% cheaper than the combined ejector -flash tank absorption system (Cycle -2). Therefore, the economic analysis showed that the absorption system with dual ejectors (Cycle -3) was the preferred option. © 2022 The Authors.
الكلمات المفتاحية: Cycle performance Double ejectors Ejector-flash tank absorption cooling cycle Techno-economical analysis
Lattieff F.A.; Atiya M.A.; Lateef R.A.; Dulaimi A.; Jweeg M.J.; Abed A.M.; Mahdi J.M.; Talebizadehsardari P.
Frontiers in Built Environment , Vol. 8
16 استشهاد Article Open Access English ISSN: 22973362
Department of Energy Engineering, University of Baghdad, Baghdad, Iraq; Al-Khawarizmi College of Engineering, University of Baghdad, Baghdad, Iraq; Physic Department, College of Science, University of Diyala, Diyala, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, Iraq; Al-Farahidi University, Baghdad, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Centre for Sustainable Energy Use in Food Chains, Institute of Energy Futures, Brunel University London, Uxbridge, United Kingdom
The earth-air heat exchanger (EHX) has a promising potential to passively save the energy consumption of traditional air conditioning systems while maintaining a high degree of indoor comfort. The use of EHX systems for air conditioning in commercial and industrial settings offers several environmental benefits and is capable of operating in both standalone and hybrid modes. This study tests the performance and effectiveness of an EHX design in a sandy soil area in Baghdad, Iraq. The area has a climate of the subtropical semi-humid type. Ambient air temperatures and soil temperatures were recorded throughout the months of 2021. During the months of January and June, the temperatures of the inlet and outflow air at varying air velocities were monitored concurrently in 10-min increments at each location. Further numerical and thermodynamical analyses of the measurements were conducted to reveal the influencing performance parameters. The highest temperature rises of air between the input and exit sections were determined as 12.3°C (January) and 17.2°C (June). It is found that the maximum values of effectiveness are 0.80 and 0.81, while coefficients of performance are 1.6 and 1.8 for January and June, respectively. It is also found that the EHX shows good functionality and effectiveness, with potential energy savings for equipment for cooling and heating under different weather conditions. Copyright © 2022 Lattieff, Atiya, Lateef, Dulaimi, Jweeg, Abed, Mahdi and Talebizadehsardari.
الكلمات المفتاحية: analyses earth-air heat exchangers geothermal energy sandy soil subtropical climate conditions thermal
Smaisim G.F.; AbdulHussein W.A.; Abed A.M.
Open Engineering , Vol. 12 (1), pp. 968-976
15 استشهاد Article Open Access English ISSN: 23915439
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Najaf, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Najaf, Iraq; Department of Vocational Education, General Directorate for Vocational Education, Ministry of Education, Baghdad, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
Global energy consumption is increasing due to population growth and with it the adverse impact of fossil fuels on the environment, making it necessary to use renewable energy sources and convert them to electrical energy using different technologies. However, the solar energy potential remains unused, while it has numerous advantages, including as a source of clean electricity and heat. One of the main difficulties in energy-saving and compacted design is how to increase the heat transfer of solar equipment. As an innovative approach to enhancing fluids’ heat transfer performance, some of the most active techniques are to exchange the working fluid with nanofluids. This work attempted to demonstrate heat transfer behavior changes when using nickel oxide (NiO), aluminum oxide (Al2O3), and copper oxide (CuO) as nanofluids at concentration volumes of 0.05, 0.075, and 0.1%. For this goal, a conical solar collector was built using local public steel sheets. Insulating polyurethane foam padding is used inside the cone. The sun’s energy is focused on the absorbing surface using thin reflective aluminum foil. The study also includes a literature review showing how nanofluids can improve heat transfer in solar collectors. The results showed that adding nanoparticles can increase the rate of heat transfer and CuO nanofluids have better augmentation in heat transfer than Al2O3 or NiO-water nanofluids where 1% CuO nanofluids increases the efficiency by up to 7% compared to water. © 2022 De Gruyter. All rights reserved.
الكلمات المفتاحية: augmentation nanofluid solar collector solar energy thermal fluid
Mourad A.; Abderrahmane A.; Abed A.M.; Toghraie D.; Ahmed S.E.; Guedri K.; Fazilati M.A.; Marzouki R.; Younis O.
Journal of Energy Storage , Vol. 55
15 استشهاد Article English ISSN: 2352152X
Laboratoire de Physique Quantique de la Matière et Modélisation Mathématique (LPQ3M), University of Mascara, Algeria; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Mathematics, Faculty of Science, King Khalid University, Abha, 62529, Saudi Arabia; Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, Makkah, 21955, Saudi Arabia; Chemistry Department, College of Science, King Khalid University, Abha, 61413, Saudi Arabia; Department of Mechanical Engineering, College of Engineering in Wadi Addwasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Department of Mechanical Engineering, Faculty of Engineering, University of Khartoum, Sudan
Latent heat thermal energy storage (LHTES) units can store important amounts of energy by employing phase change materials (PCMs). PCMs have a relatively inadequate thermal conductivity which hinders the thermal performance of LHTES. Thus, it is imperative to take measures to improve thermal conductivity or heat transfer within LHTES units. This article examines the heat diffusion improvement within wavy snowflake-shaped containers filled with nano-enhanced PCM (NEPCM). N-Octadecane enhanced with Al2O3 nanoparticles, respectively, are used as nanoparticles and PCM. A numerical model was developed using the standard Galerkin Finite Element Method to analyze the phase change phenomenon. The thermal performance of the LHTES is determined using thermodynamics' first and second laws. The effects of nanoparticle volume fractions (φ) and geometry parameters on the melting rate are investigated. The major findings revealed that the melting process could be well controlled using a lattice of heated fins. Also, the growth in waviness parameter and φ enhances the rates of the heat transfer and average liquid fraction. © 2022 Elsevier Ltd
الكلمات المفتاحية: FEM Irregular domain PCM Snowflake-shaped LHTES
Yavari R.; Abed A.M.; Akbari O.A.; Marzban A.; Baghaei S.
Progress in Nuclear Energy , Vol. 153
15 استشهاد Article English ISSN: 01491970
Department of Mechanical Engineering, Aligudarz Branch, Islamic Azad University, Aligudarz, Iran; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Young Researchers and Elite Club, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
In this numerical study, the numerical simulation of laminar free convection of water/silver nanofluid in a circular cavity under the effect of hot water fluid outside the cavity is carried out. The cooling fluid is water silver nanofluid at a volume concentration of φ = 0–0.06. This study was done for Gr = 102, 103 and 104 using the finite volume method. The Reynolds numbers of Re = 1, 10 and 100 were used. The results of the study show that due to the temperature difference between the cavity and the entering fluid, heat transfer occurs between the hot fluid in the channel and the nanofluid in the cavity at the start of the channel. This temperature difference between the surface and the fluid reinforces the buoyancy force and the Grashof number, intensifying the cavity flow and creating a more uniform cavity temperature distribution. For low Gr number, higher φ results in modest temperature gradient reduction. Using a higher fluid flow, the channel-cavity heat transfer increases which elevate dimensionless temperature curves. At a higher φ, due to the higher fluid viscosity and density, a higher momentum is required for flow convection and circulation. As a result, a stronger buoyancy force aids with free convection intensity, which is effective in elevating the Nusselt number curve values. By increasing the Reynolds number, a higher cavity heat transfer occurs due to the stronger circulating fluid's momentum. © 2022 Elsevier Ltd
الكلمات المفتاحية: Closed cavity Free convection Nanofluid Numerical study Nusselt number
Ameen K.A.; Abdulrasool hasan H.; Al-Dulaimi M.J.; Abed A.M.; Al-Qrimli H.F.
MethodsX , Vol. 9
15 استشهاد Article Open Access English ISSN: 22150161
Department of Air conditioning and Refrigeration, Al Esraa University College, Baghdad, Iraq; Department of Air conditioning and Refrigeration, AL-Mustaqbal University College, Babylon, Iraq; Petroleum Contracts & Licensing Directorate Ministry of Oil, Baghdad, Iraq
An Air Conditioning Unit with magnetic field and different tubes was designed, fabricated and evaluated in this study. The Effect of magnetic field and different types of tubes on the performance of Air Conditioning was studied experimentally. A testing system of Air Conditioning Unit was developed as the test rig. The modified tubes as a straight tube before the condenser and after the evaporator were replaced by a finned bended tube with five bends and a coil finned tube with five turns. The experimental results for the temperature of refrigerant and the coefficient of performance for an air conditioning unit were presented. Changing the tubes and introducing electric charging has a significant effect on the performance of the unit. The electric charging has a positive effect of the performance of the system. The electric charging enhanced the performance by 76% in case of bent tube and by 177% in case of coil tube. The bent pipe increases the refrigerant temperature between 50% and 200%, while the coil pipe increases the temperature between 18 % and 190 %. • This method increases the refrigerant temperature for Air Conditioning system. • This method provides simple technical testing of Air Conditioning Unit with magnetic field and different tubes • This method can be useful to enhance the performance of Air Conditioning Unit. © 2022 The Author(s)
الكلمات المفتاحية: Air refrigeration system Designed fabricated and tested Air Conditioning system Finned tubes HVAC The performance of Air Conditioning Unit
Togun H.; Homod R.Z.; Yaseen Z.M.; Abed A.M.; Dhabab J.M.; Ibrahem R.K.; Dhahbi S.; Rashidi M.M.; Ahmadi G.; Yaïci W.; Mahdi J.M.
Nanomaterials , Vol. 12 (15)
14 استشهاد Article Open Access English ISSN: 20794991
Department of Biomedical Engineering, University of Thi-Qar, Nassiriya, 64001, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Department of Oil and Gas Engineering, Basrah University for Oil and Gas, Basrah, 61004, Iraq; Department of Earth Sciences and Environment, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Selangor, Bangi, 43600, Malaysia; USQ’s Advanced Data Analytics Research Group, School of Mathematics Physics and Computing, University of Southern Queensland, Toowoomba, 4350, QLD, Australia; New era and Development in Civil Engineering Research Group, Scientific Research Center, Al-Ayen University, Thi-Qar, 64001, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, 51001, Iraq; Alnukhba University College, Baghdad, Iraq; Department of Medical Instrumentation Engineering, Al-Farahidi University, Baghdad, 10015, Iraq; Department of Computer Science, College of Science and Art at Mahayil, King Khalid University, Aseer, 62529, Saudi Arabia; Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, 610054, China; Faculty of Science, University of Johannesburg, P.O. Box 524, Auckland Park, 2006, South Africa; Department of Mechanical and Aerospace Engineering, Clarkson University, Potsdam, 13699-5725, NY, United States; CanmetENERGY Research Centre, Natural Resources Canada, 1 Haanel Drive, Ottawa, K1A 1M1, ON, Canada; Department of Energy Engineering, University of Baghdad, Baghdad, 10071, Iraq
Global technological advancements drive daily energy consumption, generating additional carbon-induced climate challenges. Modifying process parameters, optimizing design, and employing high-performance working fluids are among the techniques offered by researchers for improving the thermal efficiency of heating and cooling systems. This study investigates the heat transfer enhancement of hybrid “Al2O3-Cu/water” nanofluids flowing in a two-dimensional channel with semicircle ribs. The novelty of this research is in employing semicircle ribs combined with hybrid nanofluids in turbulent flow regimes. A computer modeling approach using a finite volume approach with k-ω shear stress transport turbulence model was used in these simulations. Six cases with varying rib step heights and pitch gaps, with Re numbers ranging from 10,000 to 25,000, were explored for various volume concentrations of hybrid nanofluids Al2O3-Cu/water (0.33%, 0.75%, 1%, and 2%). The simulation results showed that the presence of ribs enhanced the heat transfer in the passage. The Nusselt number increased when the solid volume fraction of “Al2O3-Cu/water” hybrid nanofluids and the Re number increased. The Nu number reached its maximum value at a 2 percent solid volume fraction for a Reynolds number of 25,000. The local pressure coefficient also improved as the Re number and volume concentration of “Al2O3-Cu/water” hybrid nanofluids increased. The creation of recirculation zones after and before each rib was observed in the velocity and temperature contours. A higher number of ribs was also shown to result in a larger number of recirculation zones, increasing the thermal performance. © 2022 by the authors.
الكلمات المفتاحية: hybrid nanofluids ribs channel separated flow thermal performance turbulent flow
Altmimi A.I.; Aws A.; Jweeg M.J.; Abed A.M.; Abdullah O.I.
Measurement Science Review , Vol. 22 (6), pp. 253-260
14 استشهاد Article Open Access English ISSN: 13358871
College of Energy and Environmental Sciences, Al-Karkh University of Science, Baghdad, Iraq; Department of Energy Engineering, University of Baghdad, Iraq; College of Technical Engineering, Al-Farahidi University, Baghdad, 10005, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanics, Al-Farabi Kazakh National University, Kazakhstan, Baghdad, Iraq; System Technologies and Engineering Design Methodology, Hamburg University of Technology, Hamburg, Germany
The wind turbine blade design is important in obtaining an effective wind turbine. In the field of wind energy, it is essential to understand the design and parameters affecting the blades of the wind turbine in order to obtain a successful design. However, most of the parameters are dependent on each other and this makes the design of wind turbines a challenging task. This research paper used the QBlade software to analyze and optimize the behavior of the small horizontal axis wind turbine. The software applies the Blade Element Momentum Theory (BEM) to study the wind turbine blades by calculating the drag and lift coefficients which were achieved by dividing the blades into 10 ascending segments. The twist angle and chord length of the blade are optimized to get the highest performance. Among the various airfoil types, the SG-6041 airfoil type was selected to build the blade structure. The calculated power coefficient was almost 0.4, which is considered high given that it was calculated under 10 m/s average wind speed and 1-meter length blade conditions. Where all the results are logical and reasonable, the software is proven to be reliable. The paper also evaluates the wind characteristics in different locations in Iraq in order to find the most optimal promising locations in Iraq. © 2022 Sciendo. All rights reserved.
الكلمات المفتاحية: aerodynamic analysis horizontal axis wind turbine power generation QBlade wind data analysis
Abed A.M.; Mohammed H.I.; Patra I.; Mahdi J.M.; Arshad A.; Sivaraman R.; Ibrahem R.K.; Al-Qrimli F.A.; Dhahbi S.; Talebizadehsardari P.
Frontiers in Chemistry , Vol. 10
13 استشهاد Retracted Open Access English ISSN: 22962646
Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Physics, College of Education, University of Garmian, Kalar, Iraq; National Institute of Technology Durgapur, West Bengal, Durgapur, India; Department of Energy Engineering, University of Baghdad, Baghdad, Iraq; Department of Mechanical and Construction Engineering, Faculty of Engineering and Environment, Northumbria University, Newcastle upon Tyne, United Kingdom; Department of Mathematics, Dwaraka Doss Goverdhan Doss Vaishnav College, University of Madras, Chennai, India; Department of Medical Instrumentation Engineering Techniques, Al-Farahidi University, Baghdad, Iraq; College of Engineering, Uruk University, Baghdad, Iraq; Department of Computer Science, College of Science and Art at Mahayil, King Khalid University, Muhayil, Saudi Arabia; Centre for Sustainable Energy Use in Food Chains, Institute of Energy Futures, Brunel University London, London, United Kingdom
This study aims to evaluate the melting characteristics of a phase change material (PCM) in a latent heat storage system equipped with hemispherical and quarter-spherical fins. A vertical triple-pipe heat exchanger is used as the PCM-based heat storage unit to improve the melting performance compared with a double-pipe system. Furthermore, the fins are arranged in inline and staggered configurations to improve heat transfer performance. For the quarter-spherical fins, both upward and downward directions are examined. The results of the system equipped with novel fins are compared with those without fins. Moreover, a fin is added to the heat exchanger’s base to compensate for the natural convection effect at the bottom of the heat exchanger. Considering similar fin volumes, the results show that the system equipped with four hemispherical fins on the side walls and an added fin on the bottom wall has the best performance compared with the other cases with hemispherical fins. The staggered arrangement of the fins results in a higher heat transfer rate. The downward quarter-spherical fins with a staggered configuration show the highest performance among all the studied cases. Compared with the case without fins, the heat storage rate improves by almost 78% (from 35.6 to 63.5 W), reducing the melting time by 45%. Copyright © 2022 Abed, Mohammed, Patra, Mahdi, Arshad, Sivaraman, Ibrahem, Al-Qrimli, Dhahbi and Talebizadehsardari.
الكلمات المفتاحية: hemispherical fins latent heat storage melting phase change material quarter-spherical fins triple-pipe heat exchanger
Azar A.T.; Abed A.M.; Abdulmajeed F.A.; Hameed I.A.; Kamal N.A.; Jawad A.J.M.; Abbas A.H.; Rashed Z.A.; Hashim Z.S.; Sahib M.A.; Ibraheem I.K.; Thabit R.
Sustainability (Switzerland) , Vol. 14 (17)
12 استشهاد Article Open Access English ISSN: 20711050
College of Computer and Information Sciences, Prince Sultan University, Riyadh, 11586, Saudi Arabia; Faculty of Computers and Artificial Intelligence, Benha University, Benha, 13518, Egypt; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Hillah, Babylon, 51001, Iraq; Aeronautical Department, College of Technical Engineering, Alfarahidi University, Baghdad, 10001, Iraq; Department of ICT and Natural Sciences, Norwegian University of Science and Technology, Larsgårdsve-gen, 2, Ålesund, 6009, Norway; Faculty of Engineering, Cairo University, Giza, 12613, Egypt; Department of Computer Techniques Engineering, Al-Rafidain University College, Baghdad, 10071, Iraq; College of Information Technology, Imam Ja’afar Al-Sadiq University, Al-Muthanna, 66002, Iraq; Department of Computer Technology Engineering, Al-Hadba University College, Mosul, 41002, Iraq; Department of Electrical Engineering, College of Engineering, University of Baghdad, Baghdad, 10001, Iraq; College of Technical Engineering, The Islamic University, Najaf, 54006, Iraq; College of Engineering, University of Information Technology and Communications, Baghdad, 10064, Iraq; Department of Computer Techniques Engineering, Dijlah University College, Baghdad, 10001, Iraq; Department of Medical Instrumentations Techniques Engineering, Al-Rasheed University College, Baghdad, 10001, Iraq
In the photovoltaic system, the performance, efficiency, and generated power of the PV system are affected by changes in the environment, disturbances, and parameter variations, and this leads to a deviation from the operating maximum power point (MPP) of the PV system. Therefore, the main aim of this paper is to ensure the PV system operates at the maximum power point under the influence of exogenous disturbances and uncertainties, i.e., no matter how the irradiation, temperature, and load of the PV system change, by proposing a maximum power point tracking for the photovoltaic system (PV) based on the active disturbance rejection control (ADRC) paradigm. The proposed method provides better performance with excellent tracking for the MPP by controlling the duty cycle of the DC–DC buck converter. Moreover, comparison simulations have been performed between the proposed method and the linear ADRC (LADRC), conventional ADRC, and the improved ADRC (IADRC) to investigate the effectiveness of the proposed method. Finally, the simulation results validated the accuracy of the proposed method in tracking the desired value and disturbance/uncertainty attenuation with excellent response and minimum output performance index (OPI). © 2022 by the authors.
الكلمات المفتاحية: active disturbance rejection control (ADRC) MPPT photovoltaic system (PV)
Hasan H.A.; Sherza J.S.; Abd L.A.; Ameen K.A.; Abed A.M.; Hatem A.A.; Sopian K.
Frontiers in Heat and Mass Transfer , Vol. 18
11 استشهاد Article Open Access English ISSN: 21518629
Department of Air Conditioning & Refrigeration Techniques, AL-Esra'a University College, Iraq; Department of Air conditioning and Refrigeration, AL-Mustaqbal University College, Babylon, Iraq; Solar Energy Research Institute, University Kebangsaan Malaysia, Selangor, Bangi, 43600, Malaysia
In a Fresnel-based Concentrated Photovoltaic system, multi junction solar cells suffer from increased PV temperature, resulting in a decrease its electrical efficiency. This study design to investigate the influence of using Water/Al2O3 Nanofluid as cooling fluid on heat transfer enhancement and top surface temperature for multi-junction solar cell in the Fresnel-based Concentrated Photovoltaic thermal CPVt System. The CFD simulation was conducted on mini-channel under the concentrated multi-junction solar cell with using water/Al2O3 Nanofluid and pure water as coolant fluids. The Reynolds number is in the range of 15000-30000 were examined. The average Nusselt numbers augmented through increasing Reynolds numbers. The water/Al2O3 Nanofluid provides highest heat transfer enhancement of 23% compare with water in Fresnel-based CPVt system. The top surface temperature decreases as Nusselt number increases. The Nuavg improves 21% with using of water/Al2O3 Nanofluid at lowest Reynolds number of 15000 and 23% at highest Reynolds number of 30000.The top surface temperature dropped from 337K to 327K at lowest Reynolds number of 15000 with using Water/Al2O3 Nanofluid as cooling fluid and from 323K to 315K at highest Reynolds number of 30000.This study has confirmed that the use of water/Al2O3 Nanofluid has significant influence on the dissipate the heat from Multi-Junction Solar Cell in Fresnel-based CPVt system which led to improve its electrical efficiency. © 2022, Global Digital Central. All rights reserved.
الكلمات المفتاحية: Aluminum oxide nanoparticles heat transfer mini-channel Nanofluids simulation
Al-Amir Q.R.; Hamzah H.K.; Abdulkadhim A.; Ahmed S.Y.; Ali F.H.; Abed A.M.; Abed I.M.
Journal of Thermal Analysis and Calorimetry , Vol. 147 (23), pp. 13999-14017
10 استشهاد Article English ISSN: 13886150
College of Engineering, Mechanical Engineering Department, University of Babylon, Babylon City, Hilla, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department Al-Mustaqbal University College, Babylon, 51001, Iraq
The current work investigated numerically the natural convection within a square enclosure filled with nanofluid by examining four different types of attached fins (rigid fins, flexible oscillating in the same and opposing directions) and comparing it to the case without fins. The governing equations of heat and fluid flow (mass, energy and momentum) of fluid had been solved using the finite element scheme. The results are validated with the previous studies and presented in terms of streamlines, isotherm and Nusselt number. The influence of Rayleigh number (104 ≤ Ra ≤ 106), dimensionless time (10–4 ≤ τ ≤ 1), thermal conductivity ratios (1 ≤ ks ≤ 1000), the amplitude of the flexible fins (10–2 ≤ A ≤ 0.1) and frequency (0.05 ≤ λ ≤ 0.5) are studied. The governing parameters have been tested based upon their influence on fluid flow and heat transfer for the current study. The results are shown as contours of vortices, velocity, streamlines and isotherms as well as the local and average Nusselt number (Nuave). It is observed that the larger amounts of heat are transmitted by convection at higher thermal conductivity ratios, and the greater the magnitude of the Nusselt number demonstrates the pronounced effect of the fin oscillation. In addition, when the flexible fins oscillated in the same directions, the Nusselt number increased by 18.34% as compared to the case without fins. Furthermore, increasing the flexible fins' amplitude improves the oscillating motion of the fins inside the cavity, which improves fluid flow and heat transmission strength. © 2022, Akadémiai Kiadó, Budapest, Hungary.
الكلمات المفتاحية: Flexible Fins Fluid Structure Interaction Nanofluid Natural Convection Square Enclosure
Abed A.M.; Lafta H.A.; Alayi R.; Tamim H.; Sharifpur M.; Khalilpoor N.; Bagheri B.
International Journal of Chemical Engineering , Vol. 2022
10 استشهاد Article Open Access English ISSN: 1687806X
Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Al-Nisour University College, Baghdad, Iraq; Department of Mechanics, Germi Branch, Islamic Azad University, Germi, Iran; Energy Research Center, Shahrekord Branch, Islamic Azad University, Shahrekord, Iran; Department of Mechanical Engineering, Islamic Azad University, Arak Branch, Arak, Iran; Clean Energy Research Group, Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria, Hatfield, South Africa; Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, 404, Taiwan; Department of Energy Engineering, Graduate School of the Environment and Energy, Science and Research Branch, Islamic Azad University, Tehran, Iran; Department of Geography, Payame Noor University of Iran, Tehran, Iran
Today, the use of renewable energy is increasing day by day. The most susceptible to renewable energy is biomass energy because it depends directly on the size of the population and does not have the problems of other renewable energies such as lack of access day and night and constant change throughout the year. For this reason, animal solid waste has been used in the research to supply electrical energy to the study area. In this regard, the amount of animal waste is considered as a source of biomass input energy. HOMER software was used to simulate the system under study. To better compare the competitiveness of this energy, photovoltaic systems and wind turbines have been used as different scenarios of electrical energy production in the study area. The results of scenario analysis showed that in all designed systems, the highest amount of energy production was in July and was related to the hottest season of the year. Among hybrid systems, the biomass system has a higher priority than other systems due to the minimum cost of energy production and total net present cost (NPC). The amount of exhaust gas from the biomass system reached 53.5 kg/yr and the biomass-wind and biomass-wind-solar systems reached 52.5 kg/yr and 52.2 kg/yr, respectively. The surplus generated electricity also increases from 2.91% to 6.65% from the biomass-wind system to the biomass-with-solar system. © 2022 Azher M. Abed et al.
Trung N.D.; Huy D.T.N.; Jade Catalan Opulencia M.; Lafta H.A.; Abed A.M.; Bokov D.O.; Shomurodov K.; Van Thuc Master H.; Thaeer Hammid A.; Kianfar E.
Nanoscale Research Letters , Vol. 17 (1)
9 استشهاد Retracted Open Access English ISSN: 19317573
National Economics University (NEU), Hanoi, Viet Nam; Banking University HCMC, Ho Chi Minh city, Viet Nam; International University of Japan, Niigata, Japan; College of Business Administration, Ajman University, Ajman, United Arab Emirates; Al-Nisour University College, Baghdad, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Institute of Pharmacy, Sechenov First Moscow State Medical University, 8 Trubetskaya St., bldg. 2, Moscow, 119991, Russian Federation; Laboratory of Food Chemistry, Federal Research Center of Nutrition, Biotechnology and Food Safety, 2/14 Ustyinsky pr., Moscow, 109240, Russian Federation; Department of Maxillo-Facial Surgery, Tashkent State Dental Institute, Makhtumkuli 103, Tashkent, 100147, Uzbekistan; Thai Nguyen University, University of Information and Communication Technology, Thái Nguyên, Viet Nam; Computer Engineering Department, Imam Ja’afar Al-Sadiq University, Baghdad, Iraq; Department of Chemical Engineering, Arak Branch, Islamic Azad University, Arak, Iran; Young Researchers and Elite Club, Gachsaran Branch, Islamic Azad University, Gachsaran, Iran
Conductive gels are a special class of soft materials. They harness the 3D micro/nanostructures of gels with the electrical and optical properties of semiconductors, producing excellent novel attributes, like the formation of an intricate network of conducting micro/nanostructures that facilitates the easy movement of charge carriers. Conductive gels encompass interesting properties, like adhesion, porosity, swelling, and good mechanical properties compared to those of bulk conducting polymers. The porous structure of the gels allows the easy diffusion of ions and molecules and the swelling nature provides an effective interface between molecular chains and solution phases, whereas good mechanical properties enable their practical applications. Due to these excellent assets, conductive gels are promising candidates for applications like energy conversion and storage, sensors, medical and biodevices, actuators, superhydrophobic coatings, etc. Conductive gels offer promising applications, e.g., as soft sensors, energy storage, and wearable electronics. Hydrogels with ionic species have some potential in this area. However, they suffer from dehydration due to evaporation when exposed to the air which limits their applications and lifespan. In addition to conductive polymers and organic charge transfer complexes, there is another class of organic matter called “conductive gels” that are used in the organic nanoelectronics industry. The main features of this family of organic materials include controllable photoluminescence, use in photon upconversion technology, and storage of optical energy and its conversion into electricity. Various parameters change the electronic and optical behaviors of these materials, which can be changed by controlling some of the structural and chemical parameters of conductive gels, their electronic and optical behaviors depending on the applications. If the conjugated molecules with π bonds come together spontaneously, in a relative order, to form non-covalent bonds, they form a gel-like structure that has photoluminescence properties. The reason for this is the possibility of excitation of highest occupied molecular orbital level electrons of these molecules due to the collision of landing photons and their transfer to the lowest unoccupied molecular orbital level. This property can be used in various nanoelectronic applications such as field-effect organic transistors, organic solar cells, and sensors to detect explosives. In this paper, the general introduction of conductive or conjugated gels with π bonds is discussed and some of the physical issues surrounding electron excitation due to incident radiation and the mobility of charge carriers, the position, and role of conductive gels in each of these applications are discussed. © 2022, The Author(s).
الكلمات المفتاحية: Conductive gel Field-effect transistor Mobility Molecular Photoluminescence Polymer Receptor molecule Sensor
Ansari M.J.; Machek P.; Jarosova M.; Abed A.M.; Dehno Khalaji A.
Journal of Materials Science: Materials in Electronics , Vol. 33 (8), pp. 5686-5695
9 استشهاد Article English ISSN: 09574522
Department of Pharmaceutics, College of Pharmacy, Prince Sattam Bin Abdulaziz University, Al-Kharj, Saudi Arabia; Institute of Physic of the Czech Academy of Sciences, Na Slovance 2, Prague, 182 21, Czech Republic; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Department of Chemistry, Faculty of Science, Golestan University, Gorgān, Iran
Ceria (CeO2) nanoparticles were successfully synthesized by co-precipitation thermal degradation at 500 °C and 600 °C as a facile and low-cost method. The as-prepared CeO2 nanoparticles were characterized by FT-IR, UV–Vis, XRD and TEM. XRD patterns confirm a cubic phase of nanomaterials with an average crystallite size of 11.2 nm and 17.1 nm for Ce-1 and Ce-2, respectively. The effect of calcination temperature has been studied on the morphology, properties and photocatalytic degradation of Rhodamine B (Rh-B) under UV light. FT-IR spectra present strong bands assigned to Ce–O–Ce vibration below 550 cm−1 for both samples. UV–Vis spectra show maximum absorbance at 352 nm with an optical bandgap of ≈ 2.96 and 3.18 eV, respectively. TEM images reveal that the particles Ce-1 and Ce-2 have approximately the average size of 11.2 and 17.1 nm with same shapes. All results confirm the synthesis of pure and single crystalline phase of the CeO2 nanoparticles. In addition, photocatalytic degradation of Rh-B dye was studied under UV light, and the effects of initial concentration of dyes, sorbent dose and contact time were investigated. Based on performed measurements, we can declare that CeO2 nanoparticles achieve good efficient photocatalytic performance for Rh-B dye degradation. © 2022, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.
Al-Mawlah Y.H.; Naji M.Z.; Al-Imari M.J.; Abdulabbas H.S.
Journal of Advanced Biotechnology and Experimental Therapeutics , Vol. 5 (2), pp. 347-357
9 استشهاد Article Open Access English ISSN: 26164760
DNA Research Center, University of Babylon, Hillah-Najaf Street, Babylon, 51001, Iraq; Department of Medical Laboratory Techniques, Al-Mustaqbal University College, Hillah-Najaf Street, 51001, Iraq; Continuous Education Department, University of Al-Ameed, Karbala, 56001, Iraq
Body fluids are frequently recovered by forensic investigators from crime scenes, and ICLE their identification is an important aspect of forensic case analysis. Determining the type and origin of human fluids recovered at a crime scene will give essential information for crime scene reconstruction by establishing a link between sample donors and actual criminal activity. The expression levels of microRNAs (miRNAs) such as miR-10b, miR-135b, miR-16, miR-126, miR-124-3p, and miR-372 in seminal fluids, blood, vaginal fluid stains, and their mixture, were measured using a quantitative real-time PCR technique. Using SNORD-47 as a reference gene, the target genes' identification and stability were assessed. miR-10b and miR-135b were expressed at higher levels in seminal fluids stains than in vaginal secretion stains; miR-124-3p and miR-372 were expressed at higher levels in vaginal stains than in seminal fluids stains; miR-16 and miR-126 were expressed at a higher level in bloodstains than in both seminal fluids and vaginal stains, and six miRNAs were expressed in seminal fluids/vaginal/blood mix stains. In conclusion, the results indicate that the expression levels of miR-10b and miR-135b (seminal fluids), miR-124-3p and miR-372 (vaginal secretion), and miR-16 and miR-126 (blood) were higher in these samples compared to the housekeeping gene SNORD-47. © 2022, Bangladesh Society for Microbiology, Immunology and Advanced Biotechnology. All rights reserved.
الكلمات المفتاحية: Body fluids identification Body fluid’s biomarker Micro-RNAs Reference genes RT-qPCR
Abed A.M.; Jasim S.A.; Lashin M.M.A.; Rodin M.N.; Mahmoud M.Z.; Ali M.H.; Husein I.; Kadhim M.M.; Abdulkadhim A.H.; Thangavelu L.; Mustafa Y.F.; Jabbar A.H.
Materials Today Communications , Vol. 31
8 استشهاد Article English ISSN: 23524928
Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Medical Laboratory Techniques Department, Al-maarif University College, Al-anbar-Ramadi, Iraq; College of Engineering, Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia; Sechenov First Moscow State Medical University, Moscow, 119991, Russian Federation; Department of Radiology and Medical Imaging, College of Applied Medical Sciences, Prince Sattam bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Faculty of Health, University of Canberra, Canberra, ACT, Australia; Al-Nisour University College, Baghdad, Iraq; Department of Mathematics, Universitas Islam Negeri Sumatera Utara, Medan, Indonesia; Department of Dentistry, Kut University College, Wasit, Kut, 52001, Iraq; College of technical engineering, The Islamic University, Najaf, Iraq; Department of Pharmacy, Osol Aldeen University College, Baghdad, Iraq; Department of Computer Engineering, Technical Engineering College, Al-Ayen University, Thi-Qar, Iraq; Department of Pharmacology, Saveetha Dental College, Saveetha Institute of Medical and Technical Science, Saveetha University, Chennai, India; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Mosul, Mosul, 41001, Iraq; Optical Department, College of Medical and Health Technology, Sawa University, Ministry of Higher Education and Scientific Research, Al-Muthanaa, Samawah, Iraq
This work aimed to investigate the cold welding process of dissimilar Cu60Zr40/Cu50Zr50 metallic glass (MG) system through the molecular dynamics (MD) simulation. The mechanical properties and plasticity behavior of the joint zone were also studied with the consideration of stress variations and shear atomic strains under the nanoindentation. The results indicated that the joining evolution was accompanied by the accumulation of shear events in the joint zone. However, one side of the joint was more affected by the atomic rearrangements, which were due to the dissimilar mechanical features of Cu60Zr40 and Cu50Zr50 alloys. The nanoindentation results also showed that the joint zone was considerably softer than the base alloys; however, no sudden shear propagation appeared in this part of the assembly. The strain maps of shear atomic strain under the nanoindentation indicated that the atomic rearrangement and shear band interactions were unsymmetrical in the joint zone so that the Cu50Zr50 side tended to form finer shear bands with more interactive features. Finally, it was concluded that a sound metallurgical bond was attained in the Cu60Zr40/Cu50Zr50 system; however, the good plasticity may come at the expense of strength in the joint zone. © 2022 Elsevier Ltd
الكلمات المفتاحية: Cold welding Mechanical properties Metallic glass Molecular dynamics
Farazin A.; Zhang C.; Abed A.M.
Polymers and Polymer Composites , Vol. 30
8 استشهاد Article Open Access English ISSN: 09673911
Faculty of Mechanical Engineering, Department of Solid Mechanics, University of Kashan, Kashan, Iran; Multidisciplinary Center for Infrastructure Engineering, Shenyang University of Technology, Shenyang, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq
In this examination, the free vibrations of complete composite shells with rectangular openings based on first-order shear deformation theory have been studied. The equations are generally written in such a way that they can be converted to any of Donnell, Love, or Sanders theories. To study the shell with the opening of the problem-solving space, it is elementalized in such a way that the boundary conditions and loading are uniform at the edges of each element. For each element, the governing equations, the boundary conditions of the edges, and the compatibility conditions at the common boundary of the adjacent elements are discretized by the generalized differential quadrature method in the longitudinal and peripheral directions, and by assembling them, a system of algebraic equations is formed. Finally, the natural frequency of the structure is calculated using the solution of the eigenvalue. To validate this method, the results are compared with the results of some articles as well as the results of Abaqus finite element software. After ensuring the efficiency of the present method, it has been used to study the effect of different parameters on the vibrational behavior of shells with and without apertures. These studies show that relatively small openings (c/L <0.3) have little effect on the natural frequency of the shell, regardless of the material and the porcelain layer of the shell. While reducing the ratio of length to radius or increasing the thickness of the shell is also effective in reducing the effects of opening. In addition, the effect of peripheral openings is far less than longitudinal openings. © The Author(s) 2022.
الكلمات المفتاحية: composite cylindrical shells generalized differential quadrature method longitudinal openings natural frequency vibrational behavior
Jamali H.U.; Sultan H.S.; Senatore A.; Al-Dujaili Z.A.; Jweeg M.J.; Abed A.M.; Abdullah O.I.
Designs , Vol. 6 (5)
8 استشهاد Article Open Access English ISSN: 24119660
Mechanical Engineering Department, College of Engineering, University of Kerbala, Karbala, 56001, Iraq; College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq; Department of Industrial Engineering, University of Salerno, Fisciano, 84084, Italy; College of Technical Engineering, Al-Farahidi University, Baghdad, 10001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hillah, 51001, Iraq; Department of Energy Engineering, College of Engineering, University of Baghdad, Baghdad, 10001, Iraq; System Technologies and Engineering Design Methodology, Hamburg University of Technology, Hamburg, 21079, Germany; Department of Mechanics, Al-Farabi Kazakh National University, Almaty, 050040, Kazakhstan
This paper focuses on a method to reduce the detrimental effects that occur due to the misalignment in journal bearings by approaching it with the more complete model of a finite length bearing. Such a drawback is quite common in industrial applications, and it is generally accepted that misalignment causes a significant thinning in the film thickness in the area that is close to the bearing edges. Therefore, removing a certain volume of material from the inner surface of the bearing (bushing) over a distance that is at the bearing edges provides an additional clearance to compensate for the clearance reduction that is due to misalignment. A numerical solution that is used in this work is based on the finite difference method where the Reynolds boundary conditions are considered in the solution scheme, thereby, using an iterative procedure to identify the cavitation zone. A three-dimensional misalignment model is incorporated in the solution in order to provide a more realistic presentation of the deviations and errors that there are in comparison with the ideal aligned case. It has been found in the present work that the edge modification increases the thickness of the lubricant layer considerably and reduces the pressure spikes that are associated with the presence of misalignment. The suggested design also reduces the coefficient of friction in comparison with that of the misaligned case. Furthermore, this method helps in reducing the asymmetry of the hydrodynamic pressure field that results from the misalignment. This method enables the operation of journal bearings over a wider range of misalignment levels without sacrificing the load-carrying capacity of the bearing by maintaining a relatively thicker layer of lubricant at the critical positions that are not so due to the effects of misalignment. © 2022 by the authors.
الكلمات المفتاحية: finite difference method geometrical design journal bearings misalignment
Cao Y.; Elmasry Y.; Abed A.M.; Singh P.K.; Aouaini F.; Bouzgarrou S.M.; Aly A.A.; Wae-Hayee M.; Galal A.M.
Case Studies in Thermal Engineering , Vol. 40
7 استشهاد Article Open Access English ISSN: 2214157X
School of Computer Science and Engineering, Xi'an Technological University, Xi'an, 710021, China; Department of Mathematics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha, 61466, Saudi Arabia; Department of Mathematics, Faculty of Science, Mansoura University, Mansoura, 35516, Egypt; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, Institute of Engineering and Technology, Gla University, U.P., Mathura, 281406, India; Department of Physics, College of Science, Princess Nourah Bint Abdulrahman University, P.O. Box 84428, Riyadh, 11671, Saudi Arabia; Civil Engineering Department, College of Engineering, Jazan University, Saudi Arabia; Higher Institute of Applied Sciences and Technologie of Sousse, Sousse University, Tunisia; Department of Mechanical Engineering, College of Engineering, Taif University, Taif, 21944, Saudi Arabia; Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hatyai, Songkhla, 90110, Thailand; Department of Mechanical Engineering, College of Engineering in Wadi Alddawasir, Prince Sattam Bin Abdulaziz University, Saudi Arabia; Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, P.O 35516, Mansoura, Egypt
Supercritical processes using carbon dioxide reached suitable sustainability in previous research. Hence, the current paper proposes and examines a recompression supercritical carbon dioxide Brayton cycle integrated with a solar power tower. To improve the stability of the solar subsystem for continuous daily operation, two energy storage stages are employed innovatively. In addition, the whole scheme embraces a solid oxide electrolyzer. Therefore, a novel combined electricity and hydrogen cogeneration model based on solar energy is evaluated here. To this end, the energy-, exergy-, sustainability-, and economic-based parametric sensitivity study is implemented comprehensively. Net present value is another performance metric investigated in this paper. Besides, a novel multi-objective approach utilizing an artificial neural network combined with a multi-objective grey wolf optimization is performed. Considering four different decision parameters, optimum objectives include exergy efficiency, hydrogen production rate, and products' unit cost. From the parametric sensitivity study, it is inferred that the outlet pressure of the low-pressure turbine significantly affects performance metrics. Also, from the optimization, the optimum values of mentioned objectives equal 2587 kg/day, 20.89%, and 17.25 $/GJ, respectively. Moreover, the net present value indicates that the payback period can be reduced up to 8.1 years corresponding to optimum operational conditions. © 2022 The Authors.
الكلمات المفتاحية: Electrolyzer Multi-objective optimization Solar power tower Supercritical process Sustainability
Tang X.; Yan G.; Abed A.M.; Sharma A.; Tag-Eldin E.; Aryanfar Y.; Alcaraz J.L.G.
Geothermal Energy , Vol. 10 (1)
7 استشهاد Article Open Access English ISSN: 21959706
School of Civil Engineering, Chongqing Vocational Institute of Engineering, Chongqing, 402260, China; School of Intelligent Construction, Luzhou Vocational and Technical College, Sichuan, Luzhou, 646000, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, GLA University, Mathura, India; Faculty of Engineering and Technology, Future University in Egypt, New Cairo, Egypt; Department of Electric Engineering and Computation, Autonomous University of Ciudad Juárez, Av. Del Charro 450 Norte. Col. Partido Romero, Chihuahua, Juárez, Mexico; Department of Industrial Engineering and Manufacturing, Autonomous University of Ciudad Juárez, Av. Del Charro 450 Norte. Col. Partido Romero, Chihuahua, Juárez, Mexico
In this paper, the inefficiency of the studied energy conversion system is identified to reduce losses and improve performance. A conventional exergy analysis has limitations that it is not able to detect and this detection is done with advanced exergy analysis. The main role of advanced exergy analysis is to help engineers improve system design and performance by providing information. This provision of information is done by isolating the exergy destruction. Separation of exergy destruction into endogenous/exogenous and unavoidable/avoidable components presents a new development in the exergy analysis of energy conversion systems, which in this paper combines both concepts. This separation increases the accuracy of the exergy analysis and facilitates the improvement of a system. The method used in this paper for separation is the thermodynamic cycle method, which is based on determining the temperature levels for ideal and irreversible cycles. Graphical Abstract: [Figure not available: see fulltext.]. © 2022, The Author(s).
الكلمات المفتاحية: Advanced exergy Exergy destruction Single flash geothermal cycle
Hamad R.F.; Smaisim G.F.; Abed A.M.
Open Engineering , Vol. 12 (1), pp. 955-967
6 استشهاد Article Open Access English ISSN: 23915439
Department of Mechanical Engineering, Faculty of Engineering, University of Kufa, Iraq; Nanotechnology and Advanced Materials Research Unit (NAMRU), Faculty of Engineering, University of Kufa, Najaf, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
Conjugate heat transfer is a complex problem because heat is transferred from a solid medium to a liquid medium through their interfaces. The steady-state laminar flow formed inside the microtubules is subjected to a constant temperature at the outer sidewall surface. These images cover a wide range of wall-to-fluid thermal conductivity ratios (ksf = 1, 2, 3, 4, and 5) and wall thickness-to-inner diameter ratios (δ/Ri = 0.25, 0.5, 0.75, 1, 1.25, and 1.5) and Reynolds numbers (Re = 200, 400, 600, 800, and 1,000). The results are processed by a Fluent program based on the finite volume method to numerically integrate the driver’s differential equations. The results show that increasing the wall-to-fluid thermal conductivity ratio ksf increases the inner wall dimensionless temperature and decreases the average Nusselt number. Conversely, an increase in the ratio of wall thickness to inner diameter results in a decrease in the dimensionless temperature of the inner wall and an increase in the average Nusselt number. © 2022 De Gruyter. All rights reserved.
الكلمات المفتاحية: conjugate enhancement of heat transfer force convection microtube simultaneous
Al-Amir Q.R.; Al-Dawody M.F.; Abd A.
Journal of The Institution of Engineers (India): Series C , Vol. 103 (3), pp. 325-337
6 استشهاد Article English ISSN: 22500545
Department of Mechanical Engineering, University of Babylon, Hillah, Iraq; Department of Mechanical Engineering, University of Al-Qadisiyah, Al Diwaniyah, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University Collage, Hillah, Iraq
The examination and design of a vehicle air conditioner were adjusted in this study by utilizing accessible diesel engine exhaust waste energy to produce the required heat for the turbocharger and a turbine attached to the refrigeration system's reciprocating compressor. The automotive air conditioning is one of the most system that heavily uses CFC compounds in modern cars. Cooling load for the automobile has been estimated and found to be within acceptable ranges which are about 1.37 TR. Engine Efficiency enhancement is essential to minimize the waste heat of the components and increases the COP. A modification for optimum design map of the vapor compression refrigeration in automobiles car by recovering the waste heat is performed. This paper aims to the system improvement by utilizing the waste heat energy and recovering the energy by using expansion of exhaust gas to circulate the turbine impeller driving the compressor of the refrigeration cycle system. This system was determined to be suitable and capable of producing the desired conditioning effect with no increase in engine load. The proposed technology reduces vehicle operating expenses and emissions created by the heating system, while also lowering global warming. The results show that the engine efficiency increased to about 42% compared to the cooling system directly connected to the engine, and the fuel consumption of the engine decreased by 17%. As for the cooling cycle, the coefficient of performance factor increased by 7%. Based on these results, we were able to find solutions to the energy wasting problems of the automobile air-conditioning system operating in the cabin cycle. © 2021, The Institution of Engineers (India).
الكلمات المفتاحية: Diesel-RK Turbocharged diesel engine Vapor compression refrigeration
Hamzah H.K.; Al-Amir Q.R.A.; Abdulkadhim A.; Ahmed S.Y.; Ali F.H.; Abed A.M.; Abed I.M.
Arabian Journal for Science and Engineering , Vol. 47 (12), pp. 15489-15504
6 استشهاد Article English ISSN: 2193567X
College of Engineering-Mechanical Engineering Department, University of Babylon, Babylon City, Hilla, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
The current study focuses on the transient mixed convection within a vented square enclosure with differentially heated vertical walls and a flexible baffle coupled to a circular solid cylinder. In numerical analysis, the COMSOL Multiphysics tool is used to simulate and solve two-dimensional governing equations using the Galerkin finite element approach and the arbitrary Lagrange–Euler (ALE) method, as well as the coupling of structure deflection and fluid flow. This work considered the effects of changing locations of flexible baffles attached to a cylinder on thermal and flow structures. The effect of several parameters, such as Richardson number (10–1 ≤ Ri ≤ 102), Cauchy number (10–12 ≤ Ca ≤ 10–4), and Reynolds numbers, (50 ≤ Re ≤ 250) on convective heat transfer characteristics are investigated for time 0.01 to 10 s. It is observed that changing time steps leads to a continuous change in fluid flow intensity which reflects on the deformation direction of the flexible baffle. The results indicated that the cavity with flexible baffle has the best average Nusselt number compared to cavities with rigid baffle and without baffles, respectively. As Re is raised from 50 to 250, the percentage of the average Nusselt number increased to 40% at Ri = 0.1 and 59% at Ri = 200. © 2022, King Fahd University of Petroleum & Minerals.
الكلمات المفتاحية: Flexible baffle Fluid-structure Interaction Mixed convection Square vented cavity
Hasan H.A.; Sherza J.S.; Abed A.M.; Sultan H.S.; Sopian K.
Open Engineering , Vol. 12 (1), pp. 743-751
5 استشهاد Article Open Access English ISSN: 23915439
Department of Air Conditioning & Refrigeration Techniques, Al-Esraa University College, Baghdad, Iraq; Department of Air Conditioning and Refrigeration, AL-Mustaqbal University College, Babylon, Iraq; College of Engineering, University of Warith Al-anbiyaa, Karbala, Iraq; Solar Energy Research Institute, University Kebangsaan Malaysia, Bangi, Selangor, 43600, Malaysia
The influence of different concentrations and nanoparticles' diameter of silicon dioxide nanoparticles on the Nusselt number enhancement ratio and friction factor for solar thermal collector (STC) was examined numerically. The CFD model was designed to show the influence of the flow of water/SiO2 and pure water inside the pipe on the enhancement of the performance of the STC. Different concentrations of SiO2 nanoparticles are used (φ = 1-4%) with several nanoparticle diameters (dp = 20-50 nm). The water/SiO2 and pure water flow under different Reynolds numbers ranging from 5,000 to 30,000. The average Nusselt numbers Nuavg improved by increasing the Reynolds numbers for both fluids. The Nuavg increases with the increase in the concentration of SiO2 nanoparticles. The water/SiO2 with nanoparticle concentration of (φ = 5%) and nanoparticle diameter of (dp = 20 nm) has the highest Nusselt number. The Nuavg enhances 25% with water/SiO2 nanofluid flow at Re = 5,000 and 15% flow at Re = 30,000. It is noted that the skin friction factor decreases with the increase in the Reynolds number for both fluids. Water/SiO2 nanofluid has a higher skin friction factor than pure water. The Nuavg improved by 31% at the lowest Reynolds number by using water/SiO2 nanofluid as the working fluid with a change in the concentration of SiO2 nanoparticles from (φ = 1%) to (φ = 4%) and improved by 42% at the highest Reynolds number of 30,000. The decrease in the nanoparticle diameter led to an increase in the Nusselt number across all Reynolds numbers. The lowest size SiO2 nanoparticles (dp = 20 nm) provides the highest Nusselt number. The lowest size SiO2 nanoparticles (dp = 20 nm) provide the highest ratio of enhancement for the Nusselt number in STC. This investigation has confirmed that the flow of water/SiO2 with AL2O3 nanoparticles of 5% (diameter of 20 nm) has a significant influence on heat transfer enhancement to improve the thermal efficiency of STC. © 2022 the author(s), published by De Gruyter.
الكلمات المفتاحية: heat transfer nanofluids silicon dioxide nanoparticles solar thermal collector
Qiu L.; Jumaah Al-Nussairi A.K.; Abed A.M.; Hasan Y.M.; Al Mashhadani Z.I.; Zabibah R.S.; Adhab A.H.; Abood E.S.; Alizadeh A.; Sabetvand R.; Hekmatifar M.
Case Studies in Thermal Engineering , Vol. 37
5 استشهاد Article Open Access English ISSN: 2214157X
School of Chemical Engineering, Sichuan University, Sichuan, Chengdu, 610065, China; Institute for Advanced Study, Chengdu University, Sichuan, Chengdu, 610106, China; Al-Manara College for Medical Sciences, Amarah, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Technical Engineering College, Al-farahidi University, Iraq; Al-Nisour University College, Baghdad, Iraq; Medical Laboratory Technology Department, College of Medical Technology, The Islamic University, Najaf, Iraq; Department of Pharmacy, Al-Zahrawi University College, Karbala, Iraq; Medical Physics Department, Hilla University College, Babylon, Iraq; Faculty of Engineering, Soran University, Department of Mechanical Engineering, Soran, Iraq; Department of Mechanical Engineering, College of Engineering, University of Zakho, Zakho, Iraq; Department of Energy Engineering and Physics, Faculty of Condensed Matter Physics, Amirkabir University of Technology, Tehran, Iran; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
Due to the importance and efficiency of heat transfer in industrial equipment, studying refrigerants to improve their efficiency in heating or cooling was attracted much attention. In this paper, the molecular dynamics (MD) simulation is employed to study the refrigerant heat transfer capability inside an nanochannel. The thermal performance of simulated samples is examined by changing the heat flux (HF) and thermal conductivity (TC). The results reveal that after 10 ns, the TCs of the oils based on ester and hydrocracked were reached to 0.14 and 0.33 W/m.K, and the HFs were reached to 511 and 793 W/m2, respectively. The obtained results indicate a better thermal behavior for hydrocracked oil, which can also transfer more heat. Therefore, the hydrocracked was chosen as the based oil for the rest of the research. On the other hand, different percentages of Cu and Fe3O4 hybrid nanoparticles and carbon nanotubes are added to the hydrocracked oil. By increasing the nanoparticles' percentage from 1 to 4%, the HF increases from 792 to 911 W/m2, and the TC also raises from 0.40 to 0.52 W/m.K. According to the results, adding the hybrid nanoparticles into the oil sample improves its thermal behavior. It is hoped that the obtained results in this research can be useful and applicable in the industry fields. © 2022 The Authors.
الكلمات المفتاحية: Molecular dynamics simulation Nanoparticle Refrigerant Thermal behavior
Tian M.-W.; Abed A.M.; Anqi A.E.; Guo W.; Wae-Hayee M.; Fayed M.; Nag K.
Case Studies in Thermal Engineering , Vol. 40
5 استشهاد Article Open Access English ISSN: 2214157X
Business School, Shanghai JianQiao University, Shanghai, 201306, China; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia; School of Credit Management, Guangdong University of Finance, Guangzhou, 510521, China; Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hatyai, Songkhla, 90110, Thailand; College of Engineering and Technology, American University of the Middle East, Kuwait
Covid-19 further revealed the significance of ventilation by air conditioning systems. Most common split heaters and resistance heaters recirculate the indoor air without ventilation process. Ventilation wastes energy consumption by the building. However, adding an air-to-air heat recovery unit seems a quick solution to reduce the wasted heat of the ventilation process. Nonetheless, recovery unit means further pumping power (pressure drop through the air-to-air heat exchanger), capital cost, additional fans and their electricity consumption, exergy costs and so on. Hence, the profitability of the recovery unit depends on outdoor temperature, desired indoor temperature, electricity price of the region, exergy loss and also the aforementioned factors. In this research the general standard Specific Exergy Costing theory is employed and simplified as an economic strategy for recovery ventilation. The model not only is able to predict the profitability of the ventilation process using air-to-air heat exchanger, but also it is an optimization tool for air-to-air heat recovery units as provided as a case study in this paper. © 2022 The Authors.
الكلمات المفتاحية: Cost rate Economic model Economy Heat exchanger Heat recovery unit SPECO
Wang X.; Manafian J.; Mahendra W.E.; Abed A.M.; Mahmoud M.Z.; Liang G.
Advances in Mathematical Physics , Vol. 2022
5 استشهاد Article Open Access English ISSN: 16879120
School of Mathematics and Statistics, Xinxiang University, Henan, Xinxiang, 453000, China; Department of Applied Mathematics, Faculty of Mathematical Sciences, University of Tabriz, Tabriz, Iran; Natural Sciences Faculty, Lankaran State University, 50, H. Aslanov Str., Lankaran, Azerbaijan; Institut Pariwisata Dan Bisnis Internasional, Denpasar Utara, Bali, Denpasar, Indonesia; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Department of Radiology and Medical Imaging, College of Applied Medical Sciences, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Faculty of Health, University of Canberra, Canberra, ACT, Australia
This paper investigates the combined damped sinusoidal oscillation solutions to the 3+1-D variable-coefficient (VC) generalized nonlinear wave equation. The bilinear form is considered in terms of Hirota derivatives. Accordingly, we utilize a binary Bell polynomial transformation for reducing the Cole-Hopf algorithm to get the exact solutions of the VC generalized NLW equation. The damped sinusoidal oscillations for two cases of the nonlinear wave ordinary differential equation will be studied. Using suitable mathematical assumptions, the novel kinds of solitary, periodic, and singular soliton solutions are derived and established in view of the trigonometric and rational functions of the governing equation. To achieve this, the illustrative example of the VC generalized nonlinear wave equation is provided to demonstrate the feasibility and reliability of the procedure used in this study. The trajectory solutions of the traveling waves are shown explicitly and graphically. The effect of the free parameters on the behavior of acquired figures of a few obtained solutions for two nonlinear rational exact cases was also discussed. By comparing the proposed method with the other existing methods, the results show that the execution of this method is concise, simple, and straightforward. © 2022 Xiuwang Wang et al.
Al-Bahrani M.; Majdi H.S.; Abed A.M.; Cree A.
International Journal of Energy Research , Vol. 46 (6), pp. 7519-7528
5 استشهاد Article Open Access English ISSN: 0363907X
School of Engineering, Computing and Mathematics, University of Plymouth, Plymouth, United Kingdom; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Iraqi Ministry of Oil, Midland Refineries Company, Baghdad, Iraq; Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Babylon, Iraq
Many crucial applications use the thermoelectric coolers (TECs) system because they have some desirable properties, including durability, reliability, simple structure, and quietness. However, the performance of TECs is sensitive to any form of change and needs to be monitored constantly to ensure that they are working at their optimal. This paper proposes a novel approach for condition monitoring. This novel approach, unlike other attempts, does not need additional sensors but is directly carried out through the exploitation of the multi-wall carbon nanotubes (MWCNTs) piezoresistive property. For the suggested approach, a polyurethane (PU) resin was altered using various MWCNTs concentrations with the aim of constructing self-sensing nanocomposites sensors whose electrical conductivity is high. To investigate the electrical properties and microstructure of the constructed sensor, electrical resistance measurement, and scanning electron microscopy were used. From the results, it can be concluded that as the thickness increased, conductivity exhibited a monotonic increase. The peak electrical conductivity was 2.55 S.cm−1 for the 3.1 mm-thick MWCNTs sensors. This is approximately 5.1 above that of the 0.6 mm-thick MWCNTs sensors. Added to this, the MWCNT/PU sensors exhibited a high-temperature sensitivity with a negative temperature coefficient of resistance. The normalised resistance obtained from the sensor with the uppermost MWCNTs concentration is lower in comparison to the sensors with lower concentrations of MWCNTs. Additionally, the TEC cooling temperature influence on the tunnelling distance between MWCNTs was analytically estimated. This study's numerical results indicate that there is a potential correlation between TEC cooling generated temperature and the variations noted in the tunnelling distance between MWCNTs with an explicit impact on the general nanocomposite sensors changes in electric resistance when the TEC system is in service. © 2022 The Authors. International Journal of Energy Research published by John Wiley & Sons Ltd.
الكلمات المفتاحية: health monitoring MWCNTs Peltier effect self-sensing nanocomposite thermoelectric coolers (TECs)
Irfan D.; Catalan Opulencia M.J.; Jasim S.A.; Salimov O.R.; Mahdi A.B.; Abed A.M.; Sarkar A.
International Journal of Hydrogen Energy , Vol. 47 (39), pp. 17341-17350
5 استشهاد Retracted Open Access English ISSN: 03603199
School of Management, Guangzhou University, Guangzhou, China; College of Business Administration, Ajman University, Ajman, United Arab Emirates; Medical Laboratory Techniques Department, Al-Maarif University College, Al-Anbar-Ramadi, Iraq; Department of Propaedeutics of Orthopedic Dentistry, Tashkent State Dental Institute, 103 Makhtumkuli Street, Tashkent, Uzbekistan; Department of Scientific Affairs, Samarkand State Medical Institute, Amir Temur Street 18, Samarkand, Uzbekistan; Anesthesia Techniques Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Air Conditioning & Refrigeration Engineering Techniques, Al-Mustaqbal University College, Babylon, Iraq; Indian Institute of Science, Karnataka, Bangalore, 560012, India
Developing economical electrocatalysts as alternatives to platinum for oxygen reduction reaction (ORR) to develop the applications of green energy devices like proton exchange membrane fuel cells (PEMFCs) is of paramount importance. In the current study, a different ratio of nitrogen-doped graphdiyne (GDY) with Fe single-site is reported to be more cost-effective and efficient for PEMFCs. The current study also demonstrates the design principle to improve the ORR activity associated with catalysts using Fe single-site with a greater Fe charge, which is controlled through the coordinated structure of the active center. Based on the simulation results, the formation of N2-doped GDY and N2-doepd Fe-GDY are more lucrative compared to the formation of Nx-doped GDY (x > 2) in terms of energy. O2 molecules have a direct dissociation on the N2-doepd Fe-GDY via Eley-Rideal (ER) mechanism, which involves the formation of H2O by reacting with H+ from the electrolyte. Moreover, N2-doepd Fe-GDY exhibits better performance as an ORR catalyst in an acidic medium because of its low overpotential of 0.488 V. However, N2-doped GDY follows the OOH∗ formation pathway, showing a higher overpotential for ORR. Furthermore, in the structure under study, the thermodynamic favorability of ORR is observed since the reaction energies calculated at each reaction step are exothermic and the energy profile of all reaction steps are downhill. The results of the current work provide new insights into the construction of extremely efficient heterogeneous catalysts in electrochemical energy technologies. © 2022 Hydrogen Energy Publications LLC
الكلمات المفتاحية: Fuel cells Graphdiyne Overpotential Oxygen reduction reaction Thermodynamic
Ansari M.J.; Jasim S.A.; Abed A.M.; Altimari U.S.; Yasin G.; Suksatan W.; Oudaha K.H.; Kadhim M.M.; Jabbar A.H.; Mustafa Y.F.
Main Group Chemistry , Vol. 21 (3), pp. 875-883
4 استشهاد Article English ISSN: 10241221
Department of Pharmaceutics, College of Pharmacy, Prince Sattam Bin Abdulaziz University, Al-kharj, Saudi Arabia; Medical Laboratory Techniques Department, Al-Maarif University College, Ramadi, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Al-Nisour University College, Baghdad, Iraq; Department of Botany, Bahauddin Zakariya University, Multan, Pakistan; Faculty of Nursing, HRH Princess Chulabhorn College of Medical Science, Chulabhorn Royal Academy, Bangkok, Thailand; Pharmaceutical Chemistry Department, College of Pharmacy, Al-Ayen University, Thi-Qar, Iraq; Department of Dentistry, Kut University College, Kut, Iraq; College of Technical Engineering, Islamic University, Najaf, Iraq; Department of Pharmacy, Osol Aldeen University College, Baghdad, Iraq; Optical Department, College of Medical and Health Technology, Sawa University, Ministry of Higher Education and Scientific Research, Samawah, Iraq; Department of Pharmaceutical Chemistry, College of Pharmacy, University of Mosul, Mosul, Iraq
This work was performed to examine an idea about full chelation of Iron (Fe) by well-known favipiravir (Fav) as a possible mechanism of action for medication of COVID-19 patients. To this aim, formations of Fe- mediated dimers of Fav were investigated by performing density functional theory (DFT) computations of electronic and structural features for singular and dimer models. The results indicated that the models of dimers were suitable for formation, in which two cis (D1) and trans (D2) models were obtained regarding the configurations of two Fav counterparts towards each other. Energy results indicated that formation of D1 was slightly more favorable than formation of D2. Molecular orbital features affirmed hypothesized interacting sites of Fav for Fe-mediated dimers formations, in which atomic charges and other molecular orbital related representations affirmed such achievements. Moreover, detection of such dimer formation was also possible by monitoring variations of molecular orbitals features. As a consequence, formations of Fe-mediated dimers of Fav could be achievable for possible removal of excess of Fe as a proposed mechanism of action for Fav in medication of COVID-19 patients. © 2022 - IOS Press. All rights reserved.
الكلمات المفتاحية: COVID-19 DFT dimerization Favipiravir iron chelation
Fu H.; Li H.; Ramayah T.; Fu A.; Jabbar A.H.; Abed A.M.
Energy Sources, Part A: Recovery, Utilization and Environmental Effects , Vol. 44 (3), pp. 6466-6482
3 استشهاد Article English ISSN: 15567036
School of Economics, Anyang Normal University, Anyang, China; School of Management, Universiti Sains Malaysia, Penang, Malaysia; School of Economics and Management, Southwest University of Science and Technology, Sichuan, Mianyang, China; Department of Information Technology and Management, Daffodil International University, Bangladesh; Universiti Malaysia Sarawak (UNIMAS), Malaysia; Fakulti Ekonomi dan Pengurusan (FEP), Universiti Kebangsaan Malaysia (UKM), Malaysia; Faculty of Accounting and Management, Universiti Tunku Abdul Rahman (UTAR), Malaysia; Optical Department, College of Medical and Health Technology, Sawa University, Ministry of Higher Education and Scientific Research, Samawah, Iraq; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
In this study, the effects of sustainable development of agricultural IoT are being investigated in 13 cities of Anhui province in China by Principal Component Analysis (PCA) and drivers-pressures-state-impact-response (DPSIR) models. The relevant theories are combined with agricultural IoT research, and an effective evaluation system is proposed. The main goals of this study are to recognize the essential parameters in the study of agricultural IoT; investigate the effects of the technological and economic environment of agricultural IoT. The sustainable development model and evaluation index system are combined with the driving force-state-response framework. The PCA algorithm is used for index value assignment. The scores of sustainable developments of agricultural IoT in each city of province A are calculated. In the balance ranking of sustainable development of agricultural IoT, city A ranks first with the driving force score of 0.233, the state score of 0.2, and the response score of 0.281. The results provided the data support for the investigation of supportable expansion of emerging industries in the economic globalization field. © 2022 Taylor & Francis Group, LLC.
الكلمات المفتاحية: agricultural efficiency Agriculture China Internet of things sustainable development
Tian Y.; Abed A.M.; Aljeboree A.M.; Mohammed H.T.; Izzat S.E.; Zare M.H.; Kotb H.; Sarkar S.M.
Arabian Journal of Chemistry , Vol. 15 (12)
3 استشهاد Article Open Access English ISSN: 18785352
Institute of Intelligent Manufacturing, Qingdao Huanghai University, Shandong, Qingdao, 266427, China; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Chemistry Department, College of Sciences for Women, University of Babylon, Hilla, Iraq; Anesthesia Techniques Department, Al-Mustaqbal University College, Babylon, Iraq; Pharmacy Department, Al-Nisour University College, Baghdad, Iraq; Isfahan University of Technology, Department of Chemical Engineering, Isfahan, 84156-83111, Iran; Department of Electrical Power and Machines, Faculty of Engineering, Alexandria University, Alexandria, Egypt; Department of Applied Science, Technological University of the Shannon: Midlands Midwest, Limerick, Moylish, V94 EC5T, Ireland
One of the methods of industrial dimethyl ether production is the catalytic dehydration of methanol. In this research work, methanol dehydration reactor has been modeled using continuous model and its results have been compared with experimental works and Voronoi pore network model. A 1D heterogeneous dispersed plug flow model was utilized to model an adiabatic fixed-bed reactor for the catalytic dehydration of methanol to dimethyl ether. The mass and heat transfer equations are numerically solved for the reactor. The concentration of the reactant and products and also the temperature varies along the reactor, therefore the effectiveness factor would also change in the reactor. We used the the effectiveness factor that was simulated according to the diffusion and reaction in the catalyst pellet as a Voronoi pore network model. Sensitivity analysis was performed to determine the influence of T, P and weight hourly space velocity on performance of the chemical reactor. Acceptable agreement was reached between the measured and the model data. The results showed that the maximum reaction conversion was obtained about 90 % at WHSV = 10 h−1 and T = 560 K, while the inlet temperature (Tinlet) had a greater effect on methanol conversion. In addition, the effect of water in the feed on methanol conversion was quantitatively studied. Also, the deactivation kinetics of γ-Al2O3 heterogeneous-acidic catalyst in methanol to dimethyl ether dehydration process was studied using integral analysis method. Based on independent deactivation kinetics, a second order was found that accurately fitted the experimental conversion time data. The main reaction activation energies and catalyst deactivation energies were 143.1 and −102.1 kJ/mol, respectively. © 2022 The Author(s)
الكلمات المفتاحية: Continuous model Dimethyl ether Fixed bed reactor Mathematical and kinetic of modeling Methanol dehydration Modeling γ-Al<sub>2</sub>O<sub>3</sub> catalyst
Akbari O.A.; Haghjoo H.; Abed A.M.; Karimi M.; Maghzian A.; Shabani G.A.S.; Anvari A.; Akkurt N.; Toghraie D.
Heliyon , Vol. 8 (12)
3 استشهاد Article Open Access English ISSN: 24058440
Department of Mechanical Engineering, Islamic Azad University, Khomeinishahr Branch, Khomeinishahr, Iran; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Mechanical Engineering Department, University of Kashan, Kashan, Iran; Department of Renewable Energies and Environment, Faculty of New Science and Technologies, University of Tehran, Tehran, Iran; Department of Mechanical Engineering, Iran university of science and technology, Tehran, Iran; Munzur university, Department of Mechanical Engineering, Tunceli, 62000, Turkey
In this research, turbulent flow numerical models in a wavy channel were investigated. The studied channel is simulated in two dimensions and symmetrically in the range of Reynolds numbers from Re=10,000 to 80,000. The significant cause of this research is to investigate and determine the appropriate method for estimating the behavior of turbulent flow in a wavy channel. In this research, the behavior of turbulent flow in a wavy channel will be simulated in 7 different ways, which are k-ω SST, k-ϵ RN, k-ϵ Realizable, k−ϵ Standard, k-ω Standard, Reynolds stress and Spalart-Allmaras. The findings of this research show that the impacts of the presence of flow viscosity (friction) and the presence of adverse pressure gradients are factors that strongly affect the velocity profiles in the upstream areas of the corrugated section. Among the studied models, due to better compatibility and guessing of flow and hydrodynamic properties, k-ω SST methods and Reynolds and Spalart-Allmaras stress are introduced as the best methods for such geometries. On the other hand, increasing the accuracy of other turbulence methods is related to the flow physics and geometric structure of each problem. In this research, the hydrodynamic parameters of the flow such as pressure drop, skin friction factor, and dynamic pressure drop coefficient and vortex contours, and pressure are plotted and described. © 2022 The Author(s)
الكلمات المفتاحية: Friction factor Numerical simulation Pressure drop Turbulence models Turbulent flow Wavy channel
Gatea H.T.; Hasson A.S.; Alwan A.A.; Jabbar M.Y.; Abed A.M.
Frontiers in Heat and Mass Transfer , Vol. 18
2 استشهاد Article Open Access English ISSN: 21518629
Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Mechanical Engineering Department, University of Babylon, Babylon, 51001, Iraq
The present work is an experimental study into the thermal performance of air conditioning system (split unit), bases on using renewable energy as an assisted facter. The serpentine tube flat plate solar collector (STFPSC) is combined with 1-ton capacity split air conditioning system, which is installed after the compressor to superheat the refrigerant that leaves the compressor. The conventional air conditioning (A/C) system is compared with the suggested system. The results show that the coefficient of performance (COP) of the solar assisted air conditioning system (SAAC), is affected by the enhancement of the solar collector, which enrolls the effect of solar collector tilt angle. The COP of the SAAC system is boosted by about 31.5% more than the conventional system at tilt angle 13.5˚, also the p-h diagram shows that the power consumption is enhanced at this angle. © 2022, Global Digital Central. All rights reserved.
الكلمات المفتاحية: Renewable energy Serpentine Tube Solar Assisted Air Conditioning System Solar Collector Thermal Performance
Trung N.D.; Huy D.T.N.; Opulencia M.J.C.; Lafta H.A.; Abed A.M.; Bokov D.O.; Shomurodov K.; Van Thuc Master H.; Hammid A.T.; Kianfar E.
Nanoscale Research Letters , Vol. 17 (1)
1 استشهاد Erratum Open Access English ISSN: 19317573
National Economics University (NEU), Hanoi, Viet Nam; Banking University HCMC, Ho Chi Minh City, Viet Nam; International University of Japan, Niigata, Japan; College of Business Administration, Ajman University, Ajman, United Arab Emirates; Al-Nisour University College, Baghdad, Iraq; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Institute of Pharmacy, Sechenov First Moscow State Medical University, 8 Trubetskaya St., Bldg. 2, Moscow, 119991, Russian Federation; Laboratory of Food Chemistry, Federal Research Center of Nutrition, Biotechnology and Food Safety, 2/14 Ustyinsky Pr, Moscow, 109240, Russian Federation; Department of Maxillo-Facial Surgery, Tashkent State Dental Institute, Makhtumkuli 103, Tashkent, 100147, Uzbekistan; Thai Nguyen University, University of Information and Communication Technology, Thái Nguyên, Viet Nam; Computer Engineering Department, Imam Ja’afar Al-Sadiq University, Baghdad, Iraq; Department of Chemical Engineering, Arak Branch, Islamic Azad University, Arak, Iran; Young Researchers and Elite Club, Gachsaran Branch, Islamic Azad University, Gachsaran, Iran
[No abstract available]
Al-Khaykan A.; Alrubaie A.J.; Mohammed K.A.; Abed A.M.; Alyasiri Y.I.
Al-Muthanna 2nd International Conference on Engineering Science and Technology, MICEST 2022 - Proceedings , pp. 147-151
1 استشهاد Conference paper English
Al-Mustaqbal University College, Air Conditions and Refrigeration, Techniques Engineering Department, Babil, Hillah, 51001, Iraq; Al-Mustaqbal University College, Medical Instrumentation Techniques Engineering Department, Babil, Hillah, 51001, Iraq; University College, Department of Medical Physics Hilla, Babylon, Iraq; Green Future Company, Najaf, Iraq
For more than five decades Iraq's people suffer from an increasing shortage of electric power due to the increased demand for electricity, and the disruption of electric power plants. Iraq is one of the countries that have a huge wealth type of renewable energy like more than 4000 sunny hours per year, one of the main loads of the national grid is the street lighting. This research made a full comparison between the conventional street lighting source sodium lamps (400 watts), Led lighting (200 watts), and Solar Street Lights. By using the Dialux program in lighting street which can show all the three types can give very good lighting and cover all the area required but in different wattage but same vision, even Solar Street Lights gives better vision. Using of Solar Street Lights will cut off huge loads from the national grid and cover the daily shortage of energy. Finally, this study shows a comparison among all the types depending on installation, energy consumption and running costs, safety, and warranty, maintenance and monitoring, a life span, and the cost for the same quality of lighting vision. And shows the Solar Street Lights is the best. Therefore, it will reduce electrical energy consumption in addition to its high operational life, which makes it superior to other traditional lighting types that consume electrical energy from the grid. © 2022 IEEE.
الكلمات المفتاحية: High-Intensity Discharge Lamps (HID) Illuminance Led Solar Street Lights
2021
5 بحث
Abdulkadhim A.; Hamzah H.K.; Ali F.H.; Yıldız Ç.; Abed A.M.; Abed E.M.; Arıcı M.
International Communications in Heat and Mass Transfer , Vol. 120
75 استشهاد Article English ISSN: 07351933
Air conditioning and Refrigeration Techniques Engineering Deptartment, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, University of Babylon, Babylon, 51001, Iraq; Mechanical Engineering Department, Engineering Faculty, Kocaeli University, Kocaeli, 41001, Turkey
Taking a more complex engineering geometry into account, magnetohydrodynamic natural convection of nanofluid (Cu-water) in a wavy walled enclosure having a circular hot cylinder inside is investigated by employing Galerkin-weighted residual formulation. In order to investigate the flow and heat transfer characteristics from several perspectives and increase the ability of adaptation to various engineering applications, the influences of the Hartmann number, Ha, Rayleigh number, Ra, and nanoparticle concentration are examined in detail. In addition to that, heat generation and heat absorption situations are also considered within the present work, which are simulated by a heat coefficient in a range of −10 ≤ q ≤ +10. The results revealed that increasing Ha has an insignificant effect on Nusselt number, Nu, at low Ra, however, it significantly pulls Nu down up to 33% for higher Ra, because of restricting convection. It is found that the heat coefficient, q, has a remarkable impact on Nu at low Ra, while its significance is diminished when Ra is increased. For q < 0, the heat absorption creates a heat sink, which increases Nu up to 34%, while the heat generation (q > 0) conversely reduces Nu up to 48%. Besides, variation in heat coefficient does not considerably affect the improvement impact of nanoparticles. © 2020 Elsevier Ltd
الكلمات المفتاحية: Hartmann number Heat absorption Heat generation Nanofluid Natural convection Wavy cavity
Li D.; Mahmoud M.Z.; Suksatan W.; Kuznetsova M.; Abed A.M.; Hekmatifar M.; Toghraie D.; Sabetvand R.
Case Studies in Thermal Engineering , Vol. 28
9 استشهاد Article Open Access English ISSN: 2214157X
College of Automotive Engineering, Changzhou Institute of Technology, Changzhou, 213000, Jiangsu, China; Department of Radiology and Medical Imaging, College of Applied Medical Sciences, Prince Sattam Bin Abdulaziz University, Al-Kharj, 11942, Saudi Arabia; Faculty of Health, University of Canberra, Canberra, ACT, Australia; Faculty of Nursing, HRH Princess Chulabhorn College of Medical Science, Chulabhorn Royal Academy, Bangkok, Thailand; Department of Propaedeutics of Dental Diseases, I.M. Sechenov First Moscow State Medical University (Sechenov University), Russian Federation; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran; Department of Energy Engineering and Physics, Faculty of Condensed Matter Physics, Amirkabir University of Technology, Tehran, Iran
This study was examined the thermal behavior of graphene nanosheets/carbon nanotubes-water nanofluid using the molecular dynamics method. First, the atomic stability in simulated structures was investigated by examining kinetic and potential energies. The results of this part represent the convergence of physical quantities. Also, the simulated samples' atomic and thermal behavior was studied by examining independent variables, including the volume fraction and the dimensions of carbon nanoparticles (graphene nanosheets/carbon nanotubes). The molecular dynamics simulations show that with the addition of carbon nanoparticles (NPs) with optimal value (5%), the phase change time and the thermal conductivity of the simulated nanofluid were converged to 1.10 ns and 0.73 W/mK, respectively. Also, increasing the dimensions of carbon NPs leads to a reduction in the phase change time of the simulated structure. Numerically, by increasing the length of carbon NPs to 1 nm, the phase change time in this sample reduces to 1.02 ns? Generally, these results indicate that the thermal behavior of the water-based fluid improved with the addition of carbon NPs. © 2021 The Authors
الكلمات المفتاحية: Molecular dynamics simulation Nanofluid Thermal conductivity
Majdi H.S.; Abed A.M.; Habeeb L.J.
Frontiers in Heat and Mass Transfer , Vol. 17
7 استشهاد Article Open Access English ISSN: 21518629
Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Babylon, 51001, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Training and Workshop Center, University of Technology – Iraq, Baghdad, 10001, Iraq
The present work presents and analyzes the results acquired from outdoor experimental measurements of a solar latent heat storage unit integrated with built-in thermal energy storage at the presence and absence of porous media. The tank consists of a porous media part, a packed of glass beds, and the fluid flowing through the void space surrounding the porous glass beds. The porous tanks were filled by 1.68 mm glass beds to form bed heights (h) of 10 and 20 cm. Results show that the maximum thermal storage of 110 min is achieved in hot flow rate qh=4 LPM, cold flow rate qc=5 LPM and h=20 cm, while the same flow rates of the case of absence porous media gives 90 min of thermal storage time. The same enhancement was achieved in case of qh=2 LPM, qc=2 LPM and h = 20 cm during heating process due to heat transfer resistance by mean of porous media. © 2021, Global Digital Central. All rights reserved.
الكلمات المفتاحية: Evacuated tube solar collector Porous media Thermal storage tank
Sabri L.A.; Stojanović N.; Senatore A.; Jweeg M.J.; Abed A.M.; Abdullah O.I.
Lubricants , Vol. 9 (12)
7 استشهاد Article Open Access English ISSN: 20754442
Department of Mechatronics, Al-Khwarizmi College of Engineering, University of Baghdad, Baghdad, 10003, Iraq; Department for Motor Vehicles and Motors, Faculty of Engineering, University of Kragujevac, Kragujevac, 34000, Serbia; Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II 132, Fisciano, I-84084, Italy; College of Technical Engineering, Al-Farahidi University, Baghdad, 10005, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Energy Engineering, College of Engineering, University of Baghdad, Baghdad, 10003, Iraq; Department of Mechanics, Al-Farabi Kazakh National University, Almaty, 050040, Kazakhstan; System Technologies and Engineering Design Methodology, Hamburg University of Technology, Hamburg, 21073, Germany
We present an investigation through numerical analysis (FEM) of the solution of the contact problem in friction clutch systems during engagement manoeuver. The case of high contact pressure between the sliding elements of a clutch system (flywheel, friction clutch and pressure plate) has been also considered. A finite element model of a dry friction clutch system (single disc) to estimate the distributions of the contact pressure between the contact elements of the clutch system under different working conditions has been developed and the main findings are discussed. Furthermore, the effect of modules of elasticity (contact stiffness) on the distribution of contact pressure of the mating surfaces was investigated. Also, the results encompass the deformations of the contacting surfaces for different cases. This work could provide a fundamental intermediate step to obtain a partial solution to the thermos-elastic problem in order to compute the thermal-driven deformations and stresses in the automotive clutches and brakes under different working conditions. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
الكلمات المفتاحية: Contact analysis Contact stiffness Dry clutch system Finite element method
Sabri L.A.; Topczewska K.; Jweeg M.J.; Abdullah O.I.; Abed A.M.
Computation , Vol. 9 (11)
7 استشهاد Article Open Access English ISSN: 20793197
Department of Mechatronics, Al-Khwarizmi College of Engineering, Baghdad, 10003, Iraq; Faculty of Mechanical Engineering, Bialystok University of Technology, Bialystok, 15-351, Poland; College of Technical Engineering, Al-Farahidi University, Baghdad, 10005, Iraq; Department of Energy Engineering, College of Engineering, University of Baghdad, Baghdad, 10003, Iraq; Department of Mechanics, Al-Farabi Kazakh National University, Almaty, 050040, Kazakhstan; System Technologies and Engineering Design Methodology, Hamburg University of Technology, Hamburg, 21073, Germany; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Hillah, 51001, Iraq
The dry friction clutch is an important part in vehicles, which has more than one function, but the most important function is to connect and disconnect the engine (driving part) with driven parts. This work presents a developed numerical solution applying a finite element technique in order to obtain results with high precision. A new three-dimensional model of a single-disc clutch operating in dry conditions was built from scratch. As the new model represents the real friction clutch including all details, the complexity in the geometry of the clutch is considered one of the difficulties that the researchers faced using the numerical solution. The thermal behaviour of the friction clutch during the slip phase was studied. Meanwhile, in the second part of this work, the transient thermal equations were derived from scratch to find the analytical solution for the thermal problem of a clutch disc in order to verify the numerical results. It was found, after comparison of the numerical results with analytical results, that the results of the numerical model are very accurate and the difference between them does not exceed 1%. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
الكلمات المفتاحية: Analytical solution FE solution Friction clutches Transient thermal problem
2020
5 بحث
Majdi H.S.; Abdulkadhim A.; Abed A.M.
International Journal of Heat and Technology , Vol. 38 (2), pp. 403-417
9 استشهاد Article Open Access English ISSN: 03928764
Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Babylon, 51001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
The present work demonstrates the natural convection of two layers filled the space between inner circular cylinder located within wavy enclosure using finite element scheme. The right layer is filled with Ag nano-fluid while the left layer is filled saturated porous media and the same nanofluid. The governing equations of fluid flow and heat transfer (mass, energy and momentum of the fluid) have been formulated in dimensionless form with related initial and boundary conditions the numerical solution include the subdividing the fluid flow domain to two sets of transport equations. The Darcy-Brinkman model was considered for modeling porous media with nano-fluid. The considered dimensionless parameters are Rayleigh number (106≥Ra≥103), Darcy number (10-1≥Da≥10-5), cylinder's radius (0.4≥R≥0.2), circular cylinder vertical position (+0.2≥δ≥-0.2), the number of undulation (3≥N≥0) and nano-particle volume fraction (0.1≥φ≥0). The nanofluid is combining of Ag solid particle and water as a main fluid. The results were presented according to the stream-lines, isotherms, local and the mean of Nusselt number. The results have demonstrated the increasing in the value of the Rayleigh and Darcy numbers as well as nanofluid volume fraction enhances both fluid flow strength and average of heat transfer. It has been concluded that when the number of undulations N = 1 gives better heat transfers enhancement. It is recommended that for better heat transfer average to move the internal circular cylinder with radius (R = 0.2) vertically downward (δ=-0.2) with undulations' number (N=1). © 2020 International Information and Engineering Technology Association. All rights reserved.
الكلمات المفتاحية: Nanofluid Natural convection Porous Position Rayleigh number Undulation number Wavy enclosure
Majdi H.S.; Abed A.M.; Habeeb L.J.
Journal of Mechanical Engineering Research and Developments , Vol. 44 (1), pp. 164-175
8 استشهاد Article English ISSN: 10241752
Chemical and Petroleum Industries Engineering Department, Al-Mustaqbal University College, Iraq; Department of Air Conditioning and Refrigeration Techniques Engineering, Al-Mustaqbal University College, Iraq; Training and Workshop Center, University of Technology, Iraq
Combined free-forced convection heat transfer of CuO-H2O nanofluid in a triangular cavity having an insulated circular body has been numerically studied. The top base wall is isothermally heated at Thand moved at a constant speed. While the other walls of triangle are maintained at a cold temperature Tc. Fluent 6.3 commercial program is used to solve the mass, momentum, and energy equations subjected to dimensionless boundary conditions. The present results are compared with the previous results for validation and it is found to be in an excellent agreement. The values of Richardson number taken in this study are 0.1, 1.0, 10. The temperature gradient in Grashof number is fixed at ΔT =10 K. The range of nanoparticles volume fraction extends from φ = 0 to 0.15. It is concluded that the overall and average heat transfer rate increase with increase in nanoparticles volume fraction and decrease in Richardson number. © 2021 Zibeline International Publishing Sdn. Bhd.. All rights reserved.
الكلمات المفتاحية: Adiabatic body Lid-driven Mixed convection Triangular cavity
Abed A.M.; Kareem D.F.; Majdi H.S.; Abdulkadhim A.
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences , Vol. 77 (1), pp. 36-50
8 استشهاد Article Open Access English ISSN: 22897879
Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Diwan Affairs Division, University of Baghdad, Baghdad, 10071, Iraq; Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Babylon, 51001, Iraq
This paper investigates numerically and experimentally heat transfer forced convective two-phase flow (i.e. air and water) over a rectangular ribbed channel with a vertical orientation. Three distinct rib–groove shapes have been examined. Ribs - groove shapes are; Triangle, Trapezoid, and Semi-Trapezoid ribs-groove. The present study has been performed with continuous heat flux through range of water and air superficial inlet velocity values between 0.105 – 0.316m/s, and 0.263 – 1.320 m/s, respectively. Continuity, momentum and energy calculations have been formulated using the Finite Volume Approach (FVM). Results indicate that the triangle rib-groove has the high heat transfer coefficient and lower temperature difference than other cases against a different number of Reynolds. The experimental data has been compared to numerical results for ribs –grooved channel with deviation of about 1.0% - 7.5%. The channel fitted with triangle ribs shows the highest heat transfer, which is about 59% higher than the smooth channel; 56% for trapezoidal rib, and 44% for channel fitted by semi-trapezoidal rib. Finally, the triangle rib-groove gives a better heat transfer improvement value in comparison with trapezoidal and semi trapezoidal rib-groove channel at constant pumping power. © 2020. All Rights Reserved.
الكلمات المفتاحية: CFD Rectangular channel Rib-grooves turbulent flow Two-phase flow
Majdi H.S.; Abed A.M.; Habeeb L.J.
Journal of Mechanical Engineering Research and Developments , Vol. 44 (1), pp. 151-163
5 استشهاد Article English ISSN: 10241752
Chemical and Petroleum Industries Engineering Department, Al-Mustaqbal University College, Iraq; Department of Air Conditioning and Refrigeration Techniques Engineering, Al-Mustaqbal University College, Iraq; Training and Workshop Center, University of Technology, Iraq
Numerical investigation of the mixed convection heat transfer of Al2O3water-nanofluid in a square cavity containing an adiabatic elliptic body. The top wall is moved as lid-driven and maintained at Th, while the bottom wall is cooled isothermally at Tc. The stream function-vorticity scheme was used to solve the continuity, momentum, and energy equations. The results were validated by comparison the code results used in the present study with the previous results and found to be in very good agreement. The Richardson number was fixed at 1.0 (mixed convection). The temperature difference values between the hot and cold walls were ΔT=1 and 10. Different values of nanoparticles volume fraction were used (φ =0, 0.02, 0.04, 0.08, 0.1, 0.15). Two positions of elliptic body were used: horizontal and vertical. Results show that there is a slight effect for changing the position of inner body from horizontal to vertical position on the behavior of streamlines, thermal patterns, skin friction factor and average Nusselt number on the moving top wall. Moreover, the average heat transfer rate increases with increase in nanoparticles volume fraction and temperature gradient. © 2021 Zibeline International Publishing Sdn. Bhd.. All rights reserved.
الكلمات المفتاحية: Cavity Driven-lid Elliptic body Mixed convection Square
Sopian K.; Alkhair M.; Abed A.M.; Elhub B.; Elbreki A.M.; Al-Waeli A.H.A.
ACM International Conference Proceeding Series
Conference paper English
Solar Energy Research Institute, Universiti Kebangsaan Malaysia, Bangi Selangor, 43600, Malaysia; Aeronautical Technical Engineering Department, College of Technical Engineering, Al-Farahidi University, Baghdad, Iraq; Air Conditioning and Refrigeration Department, Al-Mustaqbal University College, Al Hoillah, Iraq; Higher Institute for Science and Technology, Alkhoms, Libya; College of Electrical and Electronics Technology, Benghazi, Libya
Solar assisted thermal air conditioning refers to any air conditioning or cooling system that uses solar thermal energy. The most common solar assisted air conditioning systems are absorption, adsorption and desiccant cooling system. The disadvantages of solar thermal air conditioning system compared to the conventional vapor compression cycle are many additional components and large solar collector area. The main advantage of solar thermal air conditioning system is that it uses less electricity and uses thermal energy. Three advanced solar cooling systems are (a) a solar adsorption system (b) solar absorption system with flash tank and ejector for performance enhancement and (c) solid desiccant cooling systems. The way forward for solar thermal cooling technology is the development of more compact design that will enable the usage of less collector area with the same performance making it more cost competitive. © 2020 ACM.
الكلمات المفتاحية: Absorption Adsorption COP Ejector Solar thermal systems Solid desiccant
2019
5 بحث
Abdulkadhim A.; Hamzah H.K.; Ali F.H.; Abed A.M.; Abed I.M.
International Communications in Heat and Mass Transfer , Vol. 109
74 استشهاد Article English ISSN: 07351933
Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Mechanical Engineering, College of Engineering, University of Babylon, Babylon, Iraq
The natural convection of heat transfer is presented numerically using a temperature gradient from the hot inner corrugated cylinder. Different inner corrugated numbers located inside a cooled wavy-walled enclosure filled with two layers were simulated. The right layer is filled with Ag nanofluid and the left with a fully saturated porous media with similar nanofluid. The porous media with the nanofluid was modeled using the Darcy–Brinkman model. The main dimensionless equations are solved numerically using the method of Galerkin. This study considered the following dimensionless parameters: the Rayleigh number (106 ≥ Ra ≥ 103), the Darcy number (0.1 ≥ Da ≥ 0.00001), the vertical location (0.2 ≥ H ≥ −0.2), the number of sinusoidal inner cylinders (6 ≥ N ≥ 3), fraction volume of the nanoparticle (0.1 ≥ ⱷ ≥ 0), and porous layer thickness (0.8 ≥ XP ≥ 0.2). Results suggest that to increase the fluid flow strength, the internal sinusoidal cylinder must move upward to increase the fluid flow strength. Increasing the thickness of the porous layer reduces the average heat transfer. Results indicate further that highest fluid flow strength occurs at N = 4 when the inner sinusoidal cylinder moves downward vertically. © 2019 Elsevier Ltd
الكلمات المفتاحية: Corrugated cylinder Finite element method Nanofluid Natural convection Porous Wavy enclosure
Majdi H.S.; Abdulkadhim A.; Abed A.M.
Frontiers in Heat and Mass Transfer , Vol. 12
23 استشهاد Article Open Access English ISSN: 21518629
Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Babylon, 51001, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
Fluid flow and natural convection heat transfer in a parallelogram enclosure with an inner circular cylinder using Cu-water nanofluid are studied numerically. Dimensionless Navier-Stokes and energy equations are solved numerically using finite element method based two-dimensional flow and steady-state conditions. This study evaluates the effect of different concentrations of Cu-water nanofluids (0% to 6%) with different Rayleigh numbers 103 ≤ Ra ≤ 106 under isotherm wall temperatures. The effects of geometrical parameters of the parallelogram enclosure (inclination angle in range of 0 ≤ α≤ 30 and location of inner circular cylinder-0.2 ≤ H ≤ +0.2 on the flow field and heat transfer are examined. The results are presented in terms of streamlines, isotherms, local and average Nusselt number. It is found that the inclination angle has a significant effect on flow pattern and heat transfer and the inclination angle of 30o at a vertical location H=-0.2 gives better fluid flow strength. Moreover, the maximum heat transfer enhancement is obtained when the circular cylinder moves vertically downward up to H=-0.1 and the inclination angle is 30o. The results also indicate that as the Rayleigh number, nanofluid concentration increase, the rate of heat transfer will increase. © 2019, Global Digital Central. All rights reserved.
الكلمات المفتاحية: Cylinder Inclination angle Natural convection Parallelogrammic enclosure
Majdi H.S.; Jaafar M.S.; Abed A.M.
South African Journal of Chemical Engineering , Vol. 28, pp. 39-45
12 استشهاد Article Open Access English ISSN: 10269185
Al-Mustaqbal University College, Babylon, Iraq; Ministry of Science and Technology, Iraq
Multi-layers filters are usually used in conventional water treatment plants to purify water, reduce turbidity, and remove plankton and undesired odours. Multi-layers filter consists of basic layers represented in graded sand and supporting gravel layers. This research aims to study the efficiency of such filters after the addition of new layers made of copper and zinc particles by 50% per each with high purity, which are traditionally called KDF (Kinetic Degradation Fluxion). The purpose of adding such layers is to increase the efficiency of filters in the removal of diverse chemical contaminants of heavy elements (Lead, Nickel, iron, etc.), and chlorine to use them in traditional or advanced filter stations, such reverse osmosis plants or ion exchange water filters. A glass tube was filled with KDF, sand and gravel layers and used as a multi-layer's filter, and tests were carried out on a water sample that has been prepared in the lab with concentration of 2 mg/l for heavy elements and 5 mg/l for chlorine. Flow rates of the tested water sample were 20, 40, 60, 80 and 100 l/hr. The results show a very high efficiency of such filters to remove of chlorine from the treated water by 90% and more, while the efficiency of the modified filter to remove lead, nickel and iron was 92%, 88%, and 67% respectively; however, there was no significant records in removing the biological contaminants. © 2019
الكلمات المفتاحية: Chlorine Heavy metals KDF Multi-layers filters Water treatment
Al-Turaihi R.S.; Fadhil D.; Abed A.M.
Frontiers in Heat and Mass Transfer , Vol. 13
5 استشهاد Article Open Access English ISSN: 21518629
Department of Mechanical Engineering, University of Babylon, Iraq; Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
In this paper an experimental and numerical analysis has been conducted to study the effect of heat transfer and filed flow of two-phase flow (water and air) through a rectangular ribbed channel. The study has involved the several values of heat flux (120,140,160 Watts), air and water superficial velocity (1.096, 1.425, 1.644, 1.864, and 2.193 m/s) and (0.0421, 0.0842, and 0.1474 m/s), respectively. The distribution of temperature along the channel was photographed using thermal camera and compared with numerical results. The experimental test system was fabricated of vertical rectangular channel with cross section of (0.08m × 0.03m) and a length (0.7 m) to analyze the behavior of the mixture (water-air) over the heated plate (semi-circle ribs). The computational fluid dynamics CFD software was utilized to simulate the governing equations with initial and boundary conditions. Results found that the ribbed channel give the high heat transfer rate compared to the smooth channel. The percentage deviation between the experimental and numerical data is (1.0%-6.0%). The results proved that the flow is growing to become turbulent, eddies develop about the heated plate (rib), the temperature at the outlet decreases and heat transfer coefficient improved by adding ribs, it also improved when the velocities of the flow increased. © 2019, Global Digital Central. All rights reserved.
الكلمات المفتاحية: CFD Heated plate Rectangular channel Turbulent flow Two-phase flow
Majdi H.S.; Abdulkadhim A.; Abed A.M.; Fadhil D.
JP Journal of Heat and Mass Transfer , Vol. 16 (1), pp. 149-166
1 استشهاد Article English ISSN: 09735763
Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Babylon, 51001, Iraq; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq
This study examined numerically the natural convection heat transfer in enclosure filled with various types of nanofluids with partial active walls. The governing equations of Navier-Stokes and energy have been solved using finite element method. Two cases of thermal active walls are considered for various Rayleigh numbers 10 3 ≤ Ra ≤ 10 6 , nanofluid type like Cu, Al 2 O 3 and TiO 2 and aspect ratio 0.5 ≤ AR ≤ 2. The left sidewall is partially cooled while the right sidewall is partially heated. The other walls and remaining portions are considered adiabatic. Depending upon the location of active zones, various cases can be considered. In this work, we limited into two different cases: top-bottom (case-1) and bottom-top (case-2) active walls. The numerical programme is validated with significant researchers in terms of average Nusselt number to obtain the accuracy of the programme. The results are presented in terms of streamlines, isotherms, local and average Nusselt number. The obtained results indicate that case-1 gives better heat transfer characteristic in a comparison with case-2. Also, Cu gives better heat transfer rate with other two types. It is obtained that as the aspect ratio increases, the mean Nusselt number decreases in both the cases. © 2019 Pushpa Publishing House, Prayagraj, India.
الكلمات المفتاحية: Case-1 Case-2 Finite element method Nanofluid Natural convection
2018
5 بحث
Al-Shamani A.N.; Alghoul M.A.; Elbreki A.M.; Ammar A.A.; Abed A.M.; Sopian K.
Energy , Vol. 145, pp. 770-792
88 استشهاد Article English ISSN: 03605442
Al-Musaib Technical College, Al-Furat Al-Awsat Technical University, Kufa, Iraq; Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, 43600, Malaysia; Center of Research Excellence in Renewable Energy (CoRERE), King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, 31261, Saudi Arabia; Energy and Building Research Center, Kuwait Institute for Scientific Research, P.O. Box (24885), Safat, 13109, Kuwait; Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq
The high temperature of PV modules is one of the major factors that affect the PV system performance. The PV/T collector is proposed mainly to recover the heat of the high PV module temperature using conventional working fluids (water/air). Nanofluids (NFs) would help enhance the heat transfer/heat removal. The effect of NFs on enhancing the electrical/thermal efficiency of the PV/T collector besides the fluid's outlet temperature were investigate theoretically and experimentally. Fluent simulation tool together with energy balance equations were used. Three rounds of analysis were performed. Firstly, the optimal design of “sheet and tube” thermal absorber was determined using water as the base fluid. Secondly, the PV/T performance aspects using three types of NFs (CuO, SiO2, and ZnO) and water, were compared. Thirdly, the life cycle cost analysis/profit gain were applied to examine the feasibility of the grid connected PV/T-NF. The results showed that the optimal design of the PV/T thermal absorber requires 11 rectangular tubes per module, and the optimal rectangular tube dimensions are 24 mm (width) and 15 mm (depth). The results also revealed that the NF-SiO2 showed outstanding enhancement compared to other types of NFs and water. In addition, the results revealed that using NF- SiO2 in the PV/T collector reduced the PV module temperature from 65 °C to 45 °C and increased the outlet temperature from 35 °C to 44 °C, leading to an electrical and thermal efficiency enhancement of 12.70% and 5.76% respectively at a solar irradiance of 1000 W/m2. Payback analysis and profit gain of grid connected PV/T- NF (SiO2) system, grid connected PV/T- water system, and (grid connected PV + solar thermal) system were found (8 yrs, 10218.137 $; 11 yrs, 5518.518 $; 15 yrs, 3816.873 $), respectively. This indicated that the grid connected PV/T-NF (SiO2) system is economically feasible compared to the other systems despite the additional initial cost of the expensive NFs and the customized heat exchanger. © 2017 Elsevier Ltd
الكلمات المفتاحية: Life cycle cost analysis/ profit gain of grid connected PVT-NF system Optimal thermal absorber design Performance enhancement Plain water and water based nanofluids PV/T system
Abed A.M.; Sh Majdi H.; Hussein Z.; Fadhil D.; Abdulkadhim A.
Case Studies in Thermal Engineering , Vol. 12, pp. 749-758
50 استشهاد Article Open Access English ISSN: 2214157X
Air Conditioning and Refrigeration Engineering Techniques Department, Al-Mustaqbal University College, Babylon, Iraq
In this work, forced convection heat transfer through a horizontal pipe built-in with/without twisted tape-inserts is numerically studied under a uniform heat flux condition. Water is used as a working fluid. The governing equations are numerically solved in the domain by a finite volume method (FVM) using the Realizable κ-ϵ (RKE) model. The computational results are performed for a range of the Reynolds number (4000≤ Re ≤ 9000), the twisted ratio (4.0 ≤ TR ≤ 6.0), and heat flux (5000 ≤ q ≤ 1000 W/m2). Two type of twisted tape which inserts across a circular pipe (P-TT) and (V-cut) are carried out. The influence of these parameters on the local, average Nusselt Number and the thermal performances were examined and compared with a plain pipe under similar conditions. The results show that the average Nusselt number and friction factor raise as the twisted ratio rise for any value of Reynolds number. Furthermore, thermal performance factor tended to increase with increasing Re and decreasing tape twist ratio. Obviously, the (V-cut) twisted- tape and (P-TT) twisted tape with TR = 4 gave a higher mean thermal performance factor (4.45, and 4.19) than that with TR = 6, respectively. Finally, the present study can offer some useful results to select optimum geometrical parameters for use in shell and tube heat exchangers with a twisted tape inserted based on their specific applications. © 2018 The Authors. Published by Elsevier Ltd.
الكلمات المفتاحية: Enhancement heat transfer Friction factor P-TT twisted tape V-cut
Abdulkadhim A.; Abed A.M.; Mohsen A.M.; Al-Farhany K.
Mathematical Modelling of Engineering Problems , Vol. 5 (4), pp. 395-406
26 استشهاد Article Open Access English ISSN: 23690739
Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of Mechanical Engineering, University of Al-Qadisiyah, Al-Qadisiyah, 58001, Iraq
A numerical investigation is presented to illustrate the impact of aspect ratio in a conjugate heat transfer enclosure filled with porous media and partially heated from vertical walls. The left and right walls are partially heated and cooled, respectively. The remaining partitions of the vertical walls in addition to the top and bottom walls are considered to be adiabatic. the present work is limited to two different cases: Top-Bottom (case 1) and Bottom-Top (case 2). The dimensionless Navier-Stokes governing equations are solved using the finite element method. The parameters of interest are the modified Rayleigh number 10 ≤ Ra ≤ 103, the finite wall thickness 0.02 ≤ D ≤ 0.5, 0.1 ≤ Kr ≤ 10 and the aspect ratio 0.5 ≤ A ≤ 10. The results are presented in term of streamlines, isotherms and average Nusselt number for fluid phase and along the solid hot wall. The results indicated that the locations of partially active walls have great influence on heat transfer rate. I was shown that Bottom-Top arrangement gives better heat transfer rate compared to that of Top-Bottom. It was also found that by increasing the Rayleigh number, the rate of heat transfer increased. In contrast, increasing the wall thickness and aspect ratio reduced the heat transfer rate. © 2018 Mathematical Modelling of Engineering Problems.
الكلمات المفتاحية: Conjugate Natural convection Partially heated Porous media
Abdulkadhim A.; Abed A.M.; Al-Farhany K.
Frontiers in Heat and Mass Transfer , Vol. 11
22 استشهاد Article Open Access English ISSN: 21518629
Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of mechanical engineering, University of Al-Qadisiyah, Al-Qadisiyah, 58001, Iraq
The conjugate natural convection heat transfer in a partially heated porous enclosure had been studied numerically. The governing dimensionless equations are solved using finite element method. Classical Darcy model have been used and the considering dimensionless parameters are modified Rayleigh number (10 ≤ Ra ≤ 103), finite wall thickness (0.02 ≤ D ≤ 0.5), thermal conductivity ratio (0.1 ≤ Kr ≤ 10), and the aspect ratio (0.5 ≤ A≤ 10). The results are presented in terms of streamlines, isotherms and local and average Nusselt number. The results indicate that heat transfer can be enhanced by increasing the modified Rayleigh number, and thermal conductivity ratio. Wall thickness effects on the heat transfer mechanism had been studied and it is found that; as the Wall thickness increases, the conduction heat transfer mechanism will be dominated. Also, increasing aspect ratio will increase the stream function and reduced the heat transfer rate. © 2018, Global Digital Central. All Rights Reserved.
الكلمات المفتاحية: Aspect ratio Conjugate Finite element method Partially heated Porous cavity
Abdulkadhim A.; Al-Farhany K.; Abed A.M.
Chemical Engineering Transactions , Vol. 71, pp. 1309-1314
19 استشهاد Article English ISSN: 22839216
Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, Iraq; Department of Mechanical Engineering, University of Al-Qadisiyah, Al-Qadisiyah, Iraq
The present work studies numerically natural convective flow between a circular adiabatic cylinder located in a square porous enclosure using finite element method. Darcy-Forchheimer model is used in solving the dimensionless governing equations including; continuity, energy and momentum of the fluid along with Bousseinesq approximation. The enclosure is heated from bottom and cooled at isothermal temperature for the vertical walls. The top wall and obstacle are assumed adiabatic. The considered parameters are 103 ≤ Ra ≤ 106, 10-5 ≤ Da ≤ 10-3, obstacle vertical location 0.25 ≤ h ≤ 0.75 and cylinder radius 0.1 ≤ D ≤ 0.9 with Pr = 0.7. It is obtained that as the Rayleigh and Darcy numbers increase, both streamlines; Nusselt numbers will increase leading to increase the rate of heat transfer. The results show that the heat transfer rate is significantly dependent on the diameter of the circular cylinder and the location of the cylinder. It is found the maximum heat transfer rate obtained at D=0.1 and when the cylinder moves vertically upward at h=0.3. © 2018, AIDIC Servizi S.r.l.
2017
4 بحث
Abed A.M.; Alghoul M.A.; Sopian K.; Majdi H.S.; Al-Shamani A.N.; Muftah A.F.
Renewable and Sustainable Energy Reviews , Vol. 77, pp. 1010-1045
63 استشهاد Review English ISSN: 13640321
Solar Energy Research Institute, Universiti Kebangsaan Malaysia, Bangi, 43600, Selangor, Malaysia; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Energy and Building Research Center, Kuwait Institute for Scientific Research, Safat, 13109, Kuwait; Center of Research Excellence in Renewable Energy (CoRERE), King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, 31261, Saudi Arabia
Multiple simulations, experiments, and review studies on absorption cooling technology and cycles were conducted over the past few decades. However, the absorption cooling systems are not seen as competitive against more established vapor compression systems. Therefore, further research and development (R&D) are needed to enable absorption cooling technology to compete with vapor compression technology via the development of energy efficient, cost effective, environmentally friendly, and compact size systems. This study reviews the R&D enhancement aspects of single-stage absorption cooling cycles in terms of subcomponents, supported components added to the absorption cycle, internal energy recovery, and working fluids options. The R&D efforts on single-stage absorption cycles are detailed in a rich and simple presentation to provide a base for further modifications in the future, i.e., towards the optimization of the design geometry of distillation column inside within the generator, towards using adjustable ejector to work under actual operating conditions, applying new streamlines re-arrangements as a passive heat recovery technique, combination of internal heat recovery and superior (non-conventional) working fluids, and finally the addition of nanoparticles into the working fluid to optimize the duty of the generator. The outcome(s) of this study are detailed in the lessons-learned section, and future research priorities are highlighted in conclusion section. © 2016 Elsevier Ltd
الكلمات المفتاحية: Enhancement options of working fluids Internal heat recovery (streamlines re-arrangement) Performance enhancement Single stage absorption cooling cycle Sub-component/supported components
Al-Shamani A.N.; Sopian K.; Mat S.; Abed A.M.
Solar Energy , Vol. 150, pp. 38-48
26 استشهاد Article English ISSN: 0038092X
Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, 43600, Malaysia; Al-Musaib Technical College, Al-Furat Al-Awsat Technical University, Babylon, 51009, Iraq; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
A 1.2 kWp roof top grid-connected photovoltaic thermal system (GCPVT) with SiC nanofluid that supply both electricity and hot water has been designed, fabricated, and evaluated under the tropical climate conditions. The performance was compared to a conventional photovoltaic grid connected system (GCPV). The photovoltaic thermal (PVT) collectors consist of specially designed rectangular tube absorbers with a height of 15 mm and a width of 25 mm, and attached under an array of 10 pieces of photovoltaic modules. The results indicated that the GCPVT SiC nanofluid system has better performance ratio, array, final and reference yield, and (PV, inverter, and system) efficiencies compared to the grid-connected photovoltaic (GCPV) system. In the month of March, the GCPV indicated PV array efficiency of 8.77%, performance ratio (PR) of 77.14%, monthly array yield of 105.70 kWh/kWp and final yield of 100.53 kWh/kWp. Similarly, the GCPVT with nanofluid indicated a PV array efficiency of 13.52%, PR of 95.72%. The highest values for monthly array yield and final yield were obtained in March, were at 157.32 and 152.71 kWh/kWp, at flow rate of 0.17 kg/s, respectively. © 2017 Elsevier Ltd
الكلمات المفتاحية: (Efficiencies – PV array inverter system) GCPVT system Nanofluid Performance ratio Rectangular absorber tube
Abed A.M.; Sopian K.; Alghoul M.A.; Majadi H.S.; Al-Shamani A.N.
Solar Energy , Vol. 155, pp. 130-141
24 استشهاد Article English ISSN: 0038092X
Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, 43600, Selangor, Malaysia; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Energy and Building Research Center, Kuwait Institute for Scientific Research, Safat, 13109, Kuwait; Center of Research Excellence in Renewable Energy (CoRERE), King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, 31261, Saudi Arabia; Al-Musaib Technical College, Al-Furat-AlAwsat Technical University, Babylon, 51009, Iraq
Experimental performance of a solar assisted single stage absorption cooling system with three different design configurations operating on ammonia-water have been conducted. The system was developed and tested under the tropical climate conditions of Malaysia. The prototype cooling capacity was between 3 and 5 kW with 40 evacuated tube collectors sloped at 14° and orientated towards the south. The experimental unit has been designed to operate using three different configurations namely (a) single stage absorption cycle with single ejector (b) single stage absorption cycle with single ejector and flash tank, and (c) single stage absorption cycle with dual ejectors and flash tank. Results indicated that the dual ejectors configuration with flash tank has lower generator thermal loads and higher cooling effect compared to the other two configurations. The solar absorption system with dual ejectors and flash tank has the highest thermal COP between 0.2338 and 0.465. The COP for the basic configuration and single ejector were between 0.127–0.282 and 0.17–0.362 respectively. The theoretical model for the dual ejector flash tank cycle was validated by experimental results. © 2017 Elsevier Ltd
الكلمات المفتاحية: Ammonia-water solution Dual ejectors Evacuated tube collector Flash tank Single ejector Solar-assisted absorption cycle Thermal COP
Abdulkadhim A.; Kadhem Hamzah H.; Abed A.M.; Ali F.H.
Annales de Chimie: Science des Materiaux , Vol. 41 (1-2), pp. 7-28
4 استشهاد Article English ISSN: 01519107
Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon, 51001, Iraq; Department of mechanical engineering, Babylon University, Babylon, 51001, Iraq
The present work, the natural convection and the entropy generation of trapezoidal enclosure with an embedded baffle using Cu nanofluids are numerically studied. The governing equations of fluid heat transfer and fluid mechanics like continuty, energy and momentum of the fluid has been solved numerically using the finite element method. The impact of many dimesnionless parameters such as Rayleigh number, three different cases of baffle height (CASE-1, CASE-2, and CASE-3) on streamlines, isotherms, entropy generation, local and the average Nusselt number is presented for Cu nanofluid. The results indicate that as the Rayleigh number goes up, fluid flow strength will increase and heat transfer will enhance. Also, at high Rayleigh number, the entropy generation due to fluid friction will be greater than that due to heat transfer. Finally, it is obtained that CASE-1 gives better heat transfer characterize in a comparison with other cases of baffle height. © 2017 Lavoisier.
الكلمات المفتاحية: Baffle Enclosure Nanofluid Natural convection
2016
2 بحث
Abed A.M.; Alghoul M.A.; Sopian K.
Applied Thermal Engineering , Vol. 101, pp. 47-60
19 استشهاد Article English ISSN: 13594311
Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, 43600, Selangor, Malaysia; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Energy and Building Research Center, Kuwait Institute for Scientific Research, P.O. Box (24885), Safat, 13109, Kuwait; Center of Research Excellence in Renewable Energy (CoRe-RE), Research Institute, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, 31261, Saudi Arabia
Combining the ejector-flash tank with the single stage absorption cycle has shown potential improvement in the COP. However, the cycle is still subject for further enhancement. Addition of two ejectors in the cycle to work under low-pressure of evaporator and intermediate-pressure of flash tank could optimize the COP of the cycle. In this study, the effect of adding two ejectors has been investigated. Moreover, a new stream line between 2nd ejector and the rectifier has been created and evaluated. Energy balance analyses of the cycle before and after modification have been carried out. A computer simulation program has been developed to evaluate the performance of the cycles using ammonia-water solution as working fluid, operating under steady-state conditions. The results indicated that the overall COPs increment of the modified cycle are 11.56%, 12.42%, 13.46% and 14.05% at generator temperature of 80 °C, 85 °C, 90 °C, and 95 °C respectively. The results also showed that utilizing a part of streamlines of 2nd ejector decreased the heat power in the generator and hence increase the COP. Generator and condenser thermal loads after modification are found permanently less than that in the cycle before modification which indicates a significant enhancement of the proposed cycle. The results showed also that the proposed cycle is able to work under higher operation temperatures as same performance as the cycle before modification (with one ejector) under lower operation temperatures. So, this investigation could help to promote absorption cooling systems in locations of high temperature conditions. © 2016 Elsevier Ltd. All rights reserved.
الكلمات المفتاحية: Absorption cooling COP enhancement Cycle with one ejector and cycle with two ejectors Intermediate pressure of flash tank Low pressure of evaporator
Abed A.M.; Abed I.A.; Majdi H.S.; Al-Shamani A.N.; Sopian K.
Heat and Mass Transfer/Waerme- und Stoffuebertragung , Vol. 52 (12), pp. 2621-2634
13 استشهاد Article English ISSN: 09477411
Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, 43600, Selangor, Malaysia; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Engineering Technical College Basrah, Southern Technical University, Basrah, Iraq
This study proposes a new procedure for optimal design of shell and tube heat exchangers. The electromagnetism-like algorithm is applied to save on heat exchanger capital cost and designing a compact, high performance heat exchanger with effective use of the allowable pressure drop (cost of the pump). An optimization algorithm is then utilized to determine the optimal values of both geometric design parameters and maximum allowable pressure drop by pursuing the minimization of a total cost function. A computer code is developed for the optimal shell and tube heat exchangers. Different test cases are solved to demonstrate the effectiveness and ability of the proposed algorithm. Results are also compared with those obtained by other approaches available in the literature. The comparisons indicate that a proposed design procedure can be successfully applied in the optimal design of shell and tube heat exchangers. In particular, in the examined cases a reduction of total costs up to 30, 29, and 56.15 % compared with the original design and up to 18, 5.5 and 7.4 % compared with other approaches for case study 1, 2 and 3 respectively, are observed. In this work, economic optimization resulting from the proposed design procedure are relevant especially when the size/volume is critical for high performance and compact unit, moderate volume and cost are needed. © 2016, Springer-Verlag Berlin Heidelberg.
2015
6 بحث
Abed A.M.; Alghoul M.A.; Sopian K.; Mohammed H.A.; Majdi H.S.; Al-Shamani A.N.
Chemical Engineering and Processing: Process Intensification , Vol. 87, pp. 88-103
90 استشهاد Article English ISSN: 02552701
Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, Selangor, 43600, Malaysia; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Departments of Thermofluids, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, UTM Skudai, Johor Bahru, 81310, Malaysia
In this paper, fully developed turbulent flow and heat transfer behavior in trapezoidal channels using nanofluids are numerically studied. This study evaluates the effects of four different types of nanoparticles, Al2O3, CuO, SiO2 and ZnO, with different volume fractions (0-4%) and diameters (20-80nm) under constant heat flux (6kW/m2). The effects of geometrical parameters (wavy amplitudes, longitudinal pitch) of the trapezoidal channel on the thermal and flow fields are also examined. The results indicated that SiO2 has the highest Nusselt number among the nanofluids. Enhancement of heat transfer increases with particle volume concentration, but a slight increase in pressure loss with decreasing nanoparticle diameter is also observed. When nanofluids are used in a forced convection, 10% increase in average Nusselt number is observed for nanoparticles with a diameter of 20nm and at 4vol.%. Analysis of the flow and heat transfer in a corrugated trapezoidal channel is made based on the comprehensive evaluation factor J/f. The optimum (J/f) enhancement shows that the CuO nanofluid, lower concentration ratio of nanoparticles, trapezoidal height of 2.5mm and a longitudinal pitch of 6mm are the most desirable parameters for saving energy. Using nanofluids with a corrugated channel can improve the thermal performance because it can lead to more compact heat exchangers. © 2014 Elsevier B.V.
الكلمات المفتاحية: Corrugated trapezoidal channel Heat exchangers Heat transfer Nanofluids
Abed A.M.; Alghoul M.A.; Yazdi M.H.; Al-Shamani A.N.; Sopian K.
Applied Thermal Engineering , Vol. 75, pp. 923-940
67 استشهاد Review English ISSN: 13594311
Solar Energy Research Institute, Universiti Kebangsaan Malaysia (UKM), Bangi, Selangor, 43600, Malaysia; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
Falling film heat transfer of horizontal shell-side evaporators remains of interest to scientists due to the complexity of these phenomena for practical applications. However, characteristics of heat and mass transfers of spray evaporators are still subject to further enhancement. This study is to review the enhancement techniques and falling film flow especially the effect of nanoparticles suspended with refrigerants in order to confirm their role. The study covers the influence of surface geometry (bundles and external of tubes), normal single tube, low fins, and enhanced geometrical tubes; effect of additives; and the applications and problems related to refrigerant-based nanofluids. Heat transfer area with energy related cost and the significant efforts on empirical correlations for heat transfer coefficient are discussed. It is found that the interaction of the heat and mass transfer process on falling film flow and contradictions of thermal physical properties of nanofluids should all be taken into careful consideration. In addition, existing research on both heat and mass transfer regarding nanofl uids are found to be inadequate, and still requires extensive experimental and theoretical work on their salient parameters. Finally, this study highlights the factors affecting efficiency, compactness, and cost of the spray evaporator and the potential of enhancement techniques. © 2014 Elsevier Ltd. All rights reserved.
الكلمات المفتاحية: Efficiency-compactness-cost Enhancement techniques Falling film flow Heat & mass transfer characteristics Shell and tube evaporator
Abed A.M.; Sopian K.; Mohammed H.A.; Alghoul M.A.; Ruslan M.H.; Mat S.; Najah Al-Shamani A.
Case Studies in Thermal Engineering , Vol. 5, pp. 13-23
52 استشهاد Article Open Access English ISSN: 2214157X
Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, Selangor, 43600, Malaysia; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq; Departments of Thermofluids, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru, 81310 UTM, Malaysia
Abstract The heat transfer and flow characteristics in corrugated with V-shape lower plate using nanofluids are numerically studied. The computations are performed on uniform heat flux over a range of Reynolds number (Re) 8000-20,000. The governing equations are numerically solved in the domain by a finite volume method (FVM) using the k-ε standard turbulent model. Studies are carried out for different types of nanoparticles Al2O3,CuO, SiO2 and ZnO with different volume fractions in the range of 0-4%. Three different types of base fluid (water, glycerin, ethylene glycol) are also examined. Results indicated that the average Nusselt number for nanofluids is greater than that of the base liquid. The SiO2 nanofluid yields the best heat transfer enhancement among all other type of nanofluids. Heat transfer enhancement increase with increases the volumetric concentration, but it is accompanied by increasing pressure drop values. Moreover, the average Nusselt number increases with an increase in Reynolds number and volume concentration. The SiO2-glycerin nanofluid has the highest Nusselt number compared with other base fluids. The present study shows that these V-shaped wavy channels have advantages by using nanofluids and thus serve as promising candidates for incorporation into efficient heat transfer devices. © 2014 The Authors.
الكلمات المفتاحية: Corrugated channels Heat transfer enhancement Nanofluids Turbulent flow
Abed A.M.; Alghoul M.A.; Sirawn R.; Al-Shamani A.N.; Sopian K.
Applied Thermal Engineering , Vol. 77, pp. 65-75
31 استشهاد Article English ISSN: 13594311
Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, Selangor, 43600, Malaysia; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
Performance of ejector-flash tank-absorption cooling system working with NH3/H2O is still subject for further enhancement. The aim of this study is to optimize the utilization of the internal heat recovery of the system. Two modifications are considered, namely, a new arrangement of solution streamlines between the absorber and generator and adding a refrigerant heat exchanger (RHE) between the condenser and evaporator. Energy balance analysis is performed to compare the COP enhancement of the proposed cycle before and after modification. The COP of the proposed cycle after modification showed a significant COP enhancement about 12.2%. The COP increment with the new arrangement of the solution streamlines and adding RHE are 8% and 4.2% respectively. The results show that the cooling capacity increment of the proposed cycle with added RHE is 4.85%. Moreover, the results showed that the proposed cycle significantly reduced the generator thermal load and increased slightly the evaporator thermal load (i.e., cooling effect) compare to the cycle before modification. © 2014 Elsevier Ltd. All rights reserved.
الكلمات المفتاحية: Adding COP enhancement Ejector-flash tank-absorption cooling cycle Energy balance analysis NH<sub>3</sub>/H<sub>2</sub>O Re-arrangement of solution streamlines RHE
Abed A.M.; Alghoul M.A.; Al-Shamani A.N.; Sopian K.
Chemical Engineering and Processing: Process Intensification , Vol. 95, pp. 222-234
13 استشهاد Article English ISSN: 02552701
Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, Selangor, 43600, Malaysia; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
Combining the ejector-flash tank with the single stage absorption cycle using NH3/H2O as the working fluid has shown potential improvement in the COP. In our previous work, ejector efficiency faced some limitation due to the presence of booster at refrigerant streamline side. Removing the booster from the refrigerant streamline side and allowing the secondary flow of the ejector to work only under the intermediate pressure of the flash tank could optimize the ejector efficiency. This study examines the effect of system parameters, such as an entrainment ratio (ω), pressure ratio (PR), circulation ratio (CR), and the effectiveness of heat exchangers on the thermal loads, the coefficients of performance (COPc, COP), and the efficiency ratio (η) at various operating temperatures of the components. The study also discussed the effect of the operating conditions of the proposed cycle components on the performance parameters and the CR value in details. Comparing the results between the proposed cycle and our previous work showed that the new arrangement of the refrigerant streamline side increases the energetic secondary flow and consequently improved ejector efficiency. Moreover, the results showed that the thermal loads decrement of the generator and the absorber with SHE effectiveness increment is about 38% for each; while the thermal loads increment of evaporator and absorber with RHE effectiveness increment is found 14.86%, and 8% respectively. The performance increase ratio at maximum heat exchanger effectiveness is found 60.7% for SHE and 14.86% for RHE. Overall, the proposed cycle is considered beneficial from the viewpoint of the first law of thermodynamics. © 2015 Elsevier B.V.
الكلمات المفتاحية: Ejector-flash-tank-absorption system Enhanced ejector efficiency Improved refrigerant quality
Abed A.M.; Sopian K.; Alghoul M.A.; Al Shamani A.N.; Ruslan M.H.; Mat S.
IOP Conference Series: Materials Science and Engineering , Vol. 88 (1)
3 استشهاد Conference paper Open Access English ISSN: 17578981
Solar Energy Research Institute (SERI), Universiti Kebangsaan Malaysia, Bangi, Selangor, 43600, Malaysia; Department of Air Conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
An improved system of the new combined single stage absorption cycle operated with NH3/H2O as working fluid was performed. In order to enhance performance the cycle a new configuration of absorption system was utilized. The performances of two configurations of the combined absorption cycle were compared; a) with common solution heat exchanger and b) divided the streamline of solution heat exchanger to recover the internal heat. Based on the analysis, it has been shown that the second configuration a significant reduction of the required generator and absorber loads by about 20% and 17% respectively, with increased coefficient of performance (COP) about 12 % compared to the first configuration. This improvement in the overall COP is found due to improve energy utilization efficiency significantly.
2014
1 بحث
Abed A.M.; Sopian K.; Alghoul M.A.; Al-Shamani A.N.; Ruslan M.; Mat S.
WSEAS Transactions on Heat and Mass Transfer , Vol. 9, pp. 95-101
4 استشهاد Article English ISSN: 17905044
Solar Energy Research Institute (SERI), UniversitiKebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
In this study, a thermodynamic study based on heat transfer characteristics of the ammonia /water solar combined ejector-absorption refrigeration systemis performed. The influences of the generator temperature,heat recovery ratio, solution circulation ratio, areinvestigated in order to gauge the least amount of heat transfer area that is needed for a given heat duty and the coefficient of performance (COP). The results showed that the increases in the heat recovery ratio of the solution heat exchanger improved the coefficient of performance. It is also found that the lower solution circulation ratio is better for both the coefficient of performance (COP) and the heat transfer area.It is evident that the COP improves with increases heat transfer area of the system at fixed operation condition. The total heat transfer area required is7.764 m2at generator temperature is 100°C to reach the COP nearly 0.6148 for system cooling capacity of 5 kW.
الكلمات المفتاحية: Absorption cycles Heat transfer characteristics Performance
2013
1 بحث
Mohammed H.A.; Abed A.M.; Wahid M.A.
International Communications in Heat and Mass Transfer , Vol. 40 (1), pp. 47-57
73 استشهاد Article English ISSN: 07351933
Department of Thermofluids, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, 81310 UTM Skudai, Malaysia; Department of Air conditioning and Refrigeration, Al-Mustaqbal University College, Babylon, Iraq
Numerical investigations of forced turbulent convective flow and heat transfer in a corrugated channel of plate heat exchanger are carried out. The continuity, momentum and energy equations were solved by means of a finite volume method (FVM). The top and bottom walls of the corrugated channel are heated at constant heat flux boundary conditions. The effects of geometrical parameters of corrugated tilt angles, channel heights and wavy heights using water as a working fluid on the thermal and flow fields as well as on the performance of evaluation criterion are studied. The corrugated channel with three different corrugated tilt angles of 20°, 40° and 60° with different channel heights of 12.5, 15 and 17.5mm and different wavy heights of 2.5, 3.5 and 4.5mm are tested. This investigation covers Reynolds number and heat flux in the range of 8000-20,000 and 0.4-6kW/m2, respectively. The numerical results indicate that the wavy angle of 60° and wavy height of 2.5mm with channel height of 17.5mm are the optimum parameters and they have a significant effect on the heat transfer enhancement. It is found that using wavy channel is a suitable method to increase the thermal performance and getting higher compactness of the heat exchanger. © 2012 Elsevier Ltd.
الكلمات المفتاحية: Corrugated channel Forced convection Heat transfer enhancement Turbulent flow