Scopus Research — safa Hammodi lafta ALshujery

A biocompatible and corrosion-resistant coating was progressed by depositing a thin film of calcium titanate (CaTiO3) on CoCr-based alloy substrate using a radiofrequency magnetron plasma sputtering process to improve the characteristics of the interface between the thin-film coating and the CoCr alloy substrate. In this technique, the best power was previously observed at 225 W to get good coating film deposition properties. This power was applied to a deposited thin film of CaTiO3 on a heated CoCr-based alloy at 100°C using an argon gas atmosphere with purity (99.8%) under vacuum 1.00E-02 Torr. Different deposition rates and times were used to observe nanofilm, the thicknesses of (50 nm, 80 nm, 110 nm and 140 nm). Field-emission scanning electron microscopy (FESEM) was applied to study surface morphologies. X-ray diffraction (XRD) was used to study the crystalline structure of thin films deposited. The Vickers Micro-Hardness tests were implemented on each specimen. Vitro electrochemical corrosion tests (open circuit potential, Tafel polarization curve and cyclic polarization) of the coated and uncoated specimens were done, to find the optimal state that gives excellent resistance to corrosion in a simulated body fluid environment. The results of the experiments showed that as the thickness of the thin films increased, so did the hardness measurements. An enhancement in corrosion resistance also was clearly observed at a thickness of 140 nm CaTiO3 thin-film compared with uncoated and coated specimens at other nanothicknesses. © 2023 World Scientific Publishing Company.