Evaluation of Using Construction and Demolition Waste as Recycled Aggregate in Concrete

  Share :          
  129

Introduction Construction and demolition waste represents one of the major environmental challenges facing the construction sector due to the continuous increase in building activities, urban development, and the demolition of old structures. This waste consists of various materials, such as crushed concrete, bricks, ceramics, asphalt, metals, and wood. Improper disposal of these materials may lead to environmental pollution and increased pressure on landfill sites. With the growing emphasis on achieving sustainability in the construction industry, increasing attention has been directed toward recycling this waste and using it as an alternative to natural aggregates in concrete production. Recycled concrete aggregate is considered one of the most important available options, as it can be obtained by crushing and processing old concrete elements and classifying the resulting particles into suitable sizes for use in concrete mixtures. This study aims to evaluate the possibility of using construction and demolition waste as recycled aggregate in concrete and investigate its effect on fresh properties, mechanical performance, and durability, while identifying the factors that control its effectiveness. Concept and Sources of Recycled Aggregate Recycled aggregate is defined as granular material obtained from processing construction and demolition waste through sorting, crushing, cleaning, and size classification to produce material suitable for use as a partial or complete replacement for natural aggregate in concrete production. The main sources of recycled aggregate include: 1. Concrete Waste: Concrete waste is generated from the demolition of old buildings and concrete structures. It is one of the most commonly used sources for producing recycled aggregate. The waste is crushed and impurities are removed to obtain particles of different sizes. 2. Brick and Ceramic Waste: This waste is generated during building demolition and renovation activities. It can be used in certain types of concrete after appropriate processing. However, its properties differ from those of recycled concrete aggregate in terms of water absorption, density, and strength. 3. Asphalt Waste: Materials obtained from removing old pavement layers can be reused in suitable construction applications according to the relevant design requirements and applicable standards. Properties of Recycled Aggregate Recycled aggregate differs from natural aggregate in several physical and mechanical properties. These differences are mainly attributed to the presence of adhered old cement mortar on the surfaces of particles obtained from previously used concrete. The most important properties include: Specific Gravity: It is generally lower than that of natural aggregate due to the presence of old cement mortar and internal pores. Water Absorption: Recycled aggregate usually has higher water absorption rates because of its porosity and the hardened mortar attached to its particles. Abrasion Resistance: Its resistance to abrasion may be lower than that of natural aggregate, depending on the quality of the original concrete and the processing method. Particle-Size Distribution: This depends on the crushing and screening processes and can be controlled to achieve the required grading. Impurity Content: It may contain undesirable materials such as wood, plastic, gypsum, and soil, making appropriate sorting and cleaning necessary. These properties directly influence concrete mix design, water requirements, and the final performance of concrete. Effect of Recycled Aggregate on the Fresh Properties of Concrete The use of recycled aggregate affects the workability of fresh concrete. Its relatively high water absorption and particle porosity may reduce the amount of water available to the cement paste, potentially resulting in lower slump values and increased difficulty during mixing, placing, and compaction. Workability also depends on the replacement percentage of natural aggregate with recycled aggregate, as well as particle size, shape, and surface texture. This property can be improved by adjusting the water-to-binder ratio, using chemical plasticizers, or applying pre-treatment methods to recycled aggregate, such as controlled pre-soaking before incorporating it into the concrete mixture. Effect of Recycled Aggregate on Compressive Strength Compressive strength is one of the most important indicators used to evaluate the performance of concrete containing recycled aggregate. Replacing natural aggregate with high percentages of recycled aggregate may lead to a reduction in compressive strength compared with conventional concrete. This reduction is associated with the presence of old cement mortar, which generally has higher porosity and lower strength than natural aggregate. In addition, the presence of old and new interfacial transition zones may influence the internal structure of the concrete. However, compressive strength can be improved by selecting high-quality recycled aggregate, removing impurities, controlling the replacement percentage, and optimizing the concrete mix design and curing conditions. The use of carefully selected partial replacement percentages may also produce mechanically acceptable results, depending on the quality of the materials and the structural requirements. Effect of Recycled Aggregate on Tensile and Flexural Strength Recycled aggregate may influence tensile and flexural strength due to differences in its surface properties and the porosity of the old mortar compared with natural aggregate. The interfacial transition zone between the aggregate and cement paste is an important region controlling concrete behavior under tensile and flexural stresses. Weak bonding in this region may increase the possibility of crack initiation and propagation. Therefore, splitting tensile strength and flexural strength tests are recommended to determine the suitability of recycled aggregate for different structural applications. Effect of Recycled Aggregate on Concrete Durability Durability is one of the essential properties that must be evaluated when using recycled aggregate because of its direct relationship with the service life of concrete structures. The relatively high porosity and water absorption of recycled aggregate may increase concrete permeability, making it easier for water, chlorides, sulfates, and certain harmful chemicals to penetrate the concrete. This may negatively affect concrete resistance to corrosion and environmental deterioration, particularly in structures exposed to moisture, salts, and harsh environmental conditions. Durability can be improved by applying aggregate treatment techniques, enhancing the quality of the cement paste, using suitable mineral admixtures, and providing adequate water curing. Methods for Improving the Quality of Recycled Aggregate Several techniques can be used to improve the properties of recycled aggregate and increase its efficiency in concrete production. The most important methods include: Sorting and Cleaning: Removing foreign materials and impurities such as wood, plastic, gypsum, and soil. Crushing and Screening: Controlling particle sizes and achieving the required particle-size distribution. Pre-soaking Treatment: Carefully moistening the aggregate to reduce the effect of its water absorption during mixing. Removal of Old Cement Mortar: Using mechanical methods or suitable treatment techniques to reduce the amount of mortar attached to the aggregate particles. Surface Treatment: Applying certain materials or techniques to improve aggregate surface properties and reduce water absorption. These methods help improve the quality of recycled aggregate. However, selecting the appropriate treatment method depends on the type and quality of the waste materials and the intended concrete application. Proposed Experimental Program A laboratory investigation can be conducted to evaluate the use of construction and demolition waste as recycled aggregate by preparing several concrete mixtures. These mixtures should include a control mixture containing only natural aggregate and other mixtures in which natural aggregate is replaced with different percentages of recycled aggregate, such as 25%, 50%, 75%, and 100%. It is preferable to investigate the effect of recycled coarse aggregate separately from recycled fine aggregate to determine the influence of each type accurately, while keeping the remaining mixture constituents as constant as possible. After preparing the mixtures and casting the concrete specimens, the following laboratory tests can be performed: Slump Test: To determine the workability of fresh concrete. Compressive Strength Test: To evaluate the ability of concrete to withstand compressive loads. Splitting Tensile Strength Test: To determine the resistance of concrete to tensile stresses. Flexural Strength Test: To evaluate concrete resistance to bending loads. Water Absorption Test: To determine concrete porosity and its capacity to absorb water. Permeability Test: To evaluate the resistance of concrete to the penetration of water and harmful substances. Density Test: To determine the effect of recycled aggregate on the overall density of concrete. It is preferable to conduct strength tests at 7, 28, and 56 days, while maintaining uniform curing conditions for all specimens. The results should then be analyzed to determine the replacement percentage that provides the best balance between strength, durability, and sustainability. Conclusions The use of construction and demolition waste as recycled aggregate represents an important option for promoting sustainability in the construction sector by reducing natural aggregate consumption and minimizing the amount of waste generated from demolition and construction activities. The use of recycled aggregate may cause changes in the fresh and mechanical properties of concrete, particularly workability, compressive strength, tensile strength, and flexural strength, in addition to influencing water absorption, permeability, and durability. The final performance of concrete depends on the quality of recycled aggregate, replacement percentage, pre-treatment methods, mix design, and curing conditions. Therefore, conducting laboratory tests and determining appropriate replacement percentages are essential steps to ensure the production of concrete with acceptable engineering performance and adequate durability. Consequently, utilizing construction and demolition waste in concrete production can contribute to reducing the environmental impact of the construction sector, achieving more efficient resource utilization, and supporting the principles of the circular economy and sustainable construction.