Temperature is one of the important environmental factors that directly affects the performance and mechanical properties of concrete during casting, hardening, and service life. Temperature variations influence the cement hydration process, the rate of strength development, and the internal structure of concrete, as well as its compressive, tensile, and flexural strengths. The response of concrete to different temperatures depends on several factors, including cement type, water-cement ratio, aggregate properties, curing conditions, and duration of exposure to heat.
Effect of Temperature on Compressive Strength
Compressive strength is one of the most important properties used to evaluate concrete performance. It is significantly affected by the surrounding temperature during casting and curing, as well as by elevated temperatures to which hardened concrete may be exposed.
At moderate temperatures, cement hydration proceeds under suitable conditions, allowing the formation of hydration products responsible for strength development. However, when temperatures increase during the early stages, the hydration process may accelerate, resulting in higher early-age strength. Nevertheless, excessive temperature increases may negatively affect long-term strength development.
When hardened concrete is exposed to very high temperatures, changes occur in the internal structure of the cement paste. Microcracks may develop due to differences in thermal expansion between the concrete constituents, resulting in a reduction in compressive strength.
Effect of Temperature on Tensile Strength
The tensile strength of concrete is affected by temperature variations due to their influence on the internal bonding between the cement paste and aggregates. Exposure to elevated temperatures may cause microcracks to develop within the concrete as a result of thermal expansion and contraction, reducing its ability to resist tensile stresses.
Furthermore, sudden temperature changes may increase internal stresses, particularly when differences exist between the thermal expansion coefficients of the aggregates and cement paste. This can weaken the Interfacial Transition Zone (ITZ) between the aggregates and cement paste, negatively affecting tensile and splitting tensile strength.
Effect of Temperature on Flexural Strength
Flexural strength is an important property of concrete used in pavements and structures subjected to bending loads. This strength is affected by temperature due to the changes that occur in the microstructure of concrete.
When concrete is exposed to elevated temperatures, microcracking and weakened bonding between its constituents may reduce its ability to withstand flexural stresses. Repeated heating and cooling cycles may also increase internal damage, negatively affecting the structural performance of concrete.
Effect of Very High Temperatures on Concrete
When concrete is exposed to very high temperatures, such as those occurring during fires, its constituents undergo physical and chemical changes that affect its mechanical properties.
The most significant effects include:
Loss of part of the free water contained within the pores.
Changes in cement hydration products.
Increased microcracking within the cement paste.
Weakening of the bond between aggregates and cement paste.
Reduction in compressive, tensile, and flexural strengths.
Potential surface spalling due to increased water vapour pressure within the pores.
The severity of these effects depends on the maximum temperature, exposure duration, heating and cooling rates, and the type of aggregate used.
Effect of Low Temperatures on Concrete
Low temperatures affect the hardening process and strength development of concrete. A decrease in temperature slows down the cement hydration reaction, resulting in delayed strength development, particularly at early ages.
When freshly placed concrete is exposed to freezing conditions, the water inside its pores may freeze. This increases its volume and generates internal pressures that can damage the concrete structure and cause cracking. The risk becomes greater when concrete is subjected to repeated freeze-thaw cycles.
Therefore, appropriate protection should be provided to freshly cast concrete in cold weather, and exposure to freezing conditions should be avoided until sufficient strength has developed.
Effect of Repeated Temperature Variations
The effect of temperature is not limited to exposure to high or low temperatures individually. Repeated temperature variations are also an important factor contributing to concrete deterioration.
When concrete is subjected to repeated heating and cooling cycles, its constituents expand and contract at different rates, generating internal stresses and causing microcracks. As these cycles continue, the cracks may develop further, leading to a reduction in concrete strength and durability.
This phenomenon is particularly important in regions experiencing significant temperature differences between day and night or between seasons.
Experimental Program for Evaluating the Effect of Temperature
The effect of temperature on the mechanical properties of concrete can be investigated by preparing several concrete specimens using the same mix proportions and maintaining constant quantities of cement, water, and aggregates. The specimens are then divided into groups and exposed to different temperatures.
Experimental temperatures such as 20, 200, 400, and 600°C can be selected to investigate the effect of thermal exposure on hardened concrete. The exposure duration and heating and cooling rates should be specified and kept consistent among all groups.
After thermal exposure, the specimens are allowed to cool under controlled conditions. Several tests are then conducted, including:
Compressive Strength Test: To determine the ability of concrete to withstand compressive loads.
Splitting Tensile Strength Test: To evaluate the resistance of concrete to tensile stresses.
Flexural Strength Test: To determine the ability of concrete to resist bending stresses.
Density Test: To identify changes in concrete density after thermal exposure.
Visual Inspection: To observe cracks, spalling, and surface changes.
It is important to include a reference group that is not exposed to elevated temperatures. The specimen age and curing conditions before heating should also be kept constant. Furthermore, multiple specimens should be tested for each condition to obtain reliable results.
Factors Affecting the Response of Concrete to Temperature
The response of concrete to thermal exposure varies depending on several factors, including:
Type and chemical composition of cement.
Water-cement ratio.
Type and thermal properties of aggregates.
Age of concrete at the time of exposure.
Maximum exposure temperature.
Duration of thermal exposure.
Heating and cooling rates.
Moisture content within the concrete.
Use of fibres and chemical admixtures.
Conclusion
Temperature plays a fundamental role in determining the mechanical properties of concrete, as it affects cement hydration, strength development, and the internal structure of concrete. While moderate temperatures can provide suitable conditions for strength development, exposure to very high temperatures causes physical and chemical changes that may increase cracking and reduce compressive, tensile, and flexural strengths. Similarly, low temperatures and freezing conditions can slow down hydration or cause internal damage to concrete.
Therefore, investigating the effect of temperature is an important aspect of evaluating concrete performance and ensuring the safety of concrete structures, particularly in regions exposed to changing climatic conditions or high temperatures. Understanding these effects helps in selecting suitable materials, designing concrete mixes, and determining appropriate protection and curing procedures that contribute to improving concrete strength and durability and extending its service life.