Presented by Assist. Lect. Warwod Raoof Abd AL- Hussain, Department of Civil Engineering – Al-Mustaqbal University.
Introduction
Urban expansion and rising land costs in cities have led to the spread of high-rise buildings, which pose particular structural challenges related to resisting lateral loads caused by wind and earthquakes, in addition to the gravity loads accumulated through the floors. With the complexity of these structures, manual analysis is no longer sufficient to estimate their behavior, so specialized computer software has emerged as an essential tool for analysis and design. One of the best known is ETABS, which is dedicated to analyzing and designing multi-story buildings (CSI – ETABS) (https://www.csiamerica.com/products/etabs).
Concept of Structural Analysis for High-Rise Buildings
Structural analysis means estimating the internal forces, displacements and deformations in a building's elements under the loads acting on it. In high-rise buildings, lateral loads become more important as height increases: lateral displacement and overall stability become governing design criteria, and may be no less important than the strength of the elements themselves. For this reason, such buildings rely on lateral-load-resisting structural systems, such as moment-resisting frames, shear walls, dual systems that combine the two, tube systems, and core-based structures (Taranath, 2010) (https://doi.org/10.1201/9781439804544).
Overview of ETABS
ETABS is a program developed by Computers and Structures, Inc. (CSI) for analyzing and designing buildings. It is based on representing the building with a three-dimensional model that relies on the finite element method. The program allows users to define materials and structural sections; model columns, beams, slabs and shear walls; define the stories and their heights; define load cases and combinations according to the adopted codes; and then display the results as tables and diagrams of forces, displacements and stresses.
Stages of Analysis Using ETABS
The analysis of a high-rise building in the program typically goes through the following stages:
Creating the geometric model: Defining the grid lines, the number of stories and their heights, and defining the structural elements and their sections.
Defining materials and support conditions: Entering the properties of concrete and steel, and defining the supports at foundation level.
Defining loads: These include dead and live loads and the lateral loads resulting from wind or earthquakes, with the load combinations required by the adopted code applied.
Performing the analysis: Using equivalent static analysis, response spectrum analysis, or time history analysis for more complex structures, with the option of accounting for the P-Delta effect.
Reviewing results and design: Examining the results and checking that the code requirements are met, then designing the concrete or steel elements.
Criteria for Evaluating Building Response
The analysis results are used to check several main criteria, the most important of which are:
Overall lateral displacement of the building: To ensure occupant comfort and the safety of non-structural elements.
Story drift: The relative displacement between two consecutive stories, which must not exceed the limits set by the adopted code.
Fundamental vibration period and mode shapes: To understand the building's dynamic behavior and to make sure there is no undesirable resonance with the frequencies of external loads.
Torsion and building regularity: To detect irregularities in the horizontal or vertical distribution of mass and stiffness.
Forces in shear walls and columns: To design the load-bearing elements safely and economically.
Reliability of Results and Challenges
The accuracy of ETABS results depends on the quality of the input model. The main influencing factors include: the assumptions about element stiffness, the way slabs are modeled (rigid or semi-rigid diaphragms), the representation of shear walls, the mesh size used to subdivide the elements, the support conditions at the foundation, and accounting for soil and foundation effects where necessary. In addition, choosing load combinations according to the appropriate code, such as ASCE 7 or ACI 318, directly affects the validity of the final design (ACI 318-19) (https://www.concrete.org/).
It is important to point out that the program's output does not replace engineering judgment. The results should therefore be reviewed, for example by comparing the sum of the reactions with the sum of the applied loads, checking that the mode shapes and displacements are reasonable, and carrying out approximate hand calculations to confirm that the model is sound.
Conclusions and Recommendations
ETABS is an effective tool for analyzing and designing high-rise buildings. It allows the three-dimensional behavior of the building to be modeled and its response to gravity and lateral loads to be estimated with suitable accuracy and in less time than manual methods. It also helps in comparing different structural systems and choosing the most suitable one in terms of efficiency and cost.
It is recommended to gain a deep understanding of the theoretical foundations on which the program is based before relying on its outputs; to adhere to the adopted codes when defining loads and checking design requirements; to carry out model validation checks; and to train students and engineers to use the program correctly, while drawing on engineering experience in making the final decision.
References
Computers and Structures, Inc. (CSI). ETABS – Integrated Analysis, Design and Drafting of Building Systems. https://www.csiamerica.com/products/etabs
Taranath, B. S. (2010). Reinforced Concrete Design of Tall Buildings. CRC Press. https://doi.org/10.1201/9781439804544
Smith, B. S., & Coull, A. (1991). Tall Building Structures: Analysis and Design. John Wiley & Sons.
American Concrete Institute (ACI). (2019). Building Code Requirements for Structural Concrete (ACI 318-19). https://www.concrete.org
American Society of Civil Engineers (ASCE). (2022). Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI 7-22).